Database Info

Unable to extract and install Viper4android

Hi,
I want to install Viper on my GS4 i9500, i am currently running Aurora rom v7 based on lollipop 5.0.1. I tried dowbloading the zip for viper4android from XDA official forum (http://forum.xda-developers.com/showthread.php?t=2191223) however none of the zips were working; everytime i download and try to extract it says "bad zip file". So can anyone please point me to a working zip file for viper4android and also help me in installing and setting it up for the first time.
Thanks.

rbhanot2 said:
Hi,
I want to install Viper on my GS4 i9500, i am currently running Aurora rom v7 based on lollipop 5.0.1. I tried dowbloading the zip for viper4android from XDA official forum (http://forum.xda-developers.com/showthread.php?t=2191223) however none of the zips were working; everytime i download and try to extract it says "bad zip file". So can anyone please point me to a working zip file for viper4android and also help me in installing and setting it up for the first time.
Thanks.
Click to expand...
Click to collapse
Mediafire link works and zip ok. Don't use your mobile internet to download the zip but a computer with broadband.

Hi,
Thanks for the reply, i have downloaded and installed Viper and its driver as well; however it is still asking to install the driver every time i open it. Is it a known issue ? If yes then how to fix it; i have followed the instructions as given in the official forum.

rbhanot2 said:
Hi,
Thanks for the reply, i have downloaded and installed Viper and its driver as well; however it is still asking to install the driver every time i open it. Is it a known issue ? If yes then how to fix it; i have followed the instructions as given in the official forum.
Click to expand...
Click to collapse
The point is that for Anhdroid 5.0 and later you'll need to set your kernel to "permissive". You can use "SELinux Mode Changer" for doing so, if you have no option to install a permanent "permissive" kernel.
BTW Please press the "thanks" buton at the bottom of my posts

Its still the same issue, its still asking to install/update the drivers and even after changing the mode with the the app you posted it still shows SELinux in enforcing mode. Doesn't standard Linux commands like "sestatus" work android ? How to i permanently set the SELinux mode to Permissive rather than Enforcing ?
Isnt there any config file for selinux where i can make the change and then reboot the phone ?

rbhanot2 said:
Its still the same issue, its still asking to install/update the drivers and even after changing the mode with the the app you posted it still shows SELinux in enforcing mode. Doesn't standard Linux commands like "sestatus" work android ? How to i permanently set the SELinux mode to Permissive rather than Enforcing ?
Isnt there any config file for selinux where i can make the change and then reboot the phone ?
Click to expand...
Click to collapse
Are your sure about you granted root permissions for both apps? Which superuser app is actually installed on the phone?

LS.xD said:
Are your sure about you granted root permissions for both apps? Which superuser app is actually installed on the phone?
Click to expand...
Click to collapse
Yes i did gave root permission to both the apps; currently i am running SuperSU by Chainfire.

How can i fix this ?

How to install Viper4Android on S7 Edge?

I cant figure out how to do it, I am rooted and I can't figure it out!

Brava27 said:
I cant figure out how to do it, I am rooted and I can't figure it out!
Click to expand...
Click to collapse
Need a SeLinux Permissive Kernel for S7Edge first. Have you found one?

Brava27 said:
I cant figure out how to do it, I am rooted and I can't figure it out!
Click to expand...
Click to collapse
Seems this guy has the answer on an enforcing kernel.
http://forum.xda-developers.com/s7-edge/review/audio-quality-t3336558

If you haven't seen this thread already, check it out. I successfully installed V4A on my 935F with it.
http://forum.xda-developers.com/showthread.php?t=3335007

And FYI... it sounds fantastic!

You DON'T need permissive kernel for v4a any more..after hundereds of trials and errors I just downloaded newest apk from original v4a thread, put it in private-apps folder then set correct permitions rw-r-r, restarted device and it works flowellesly ! I have stock enforced kernel.

tin2404 said:
You DON'T need permissive kernel for v4a any more..after hundereds of trials and errors I just downloaded newest apk from original v4a thread, put it in private-apps folder then set correct permitions rw-r-r, restarted device and it works flowellesly ! I have stock enforced kernel.
Click to expand...
Click to collapse
Does it work with Spotify as well?

Why don' you try? I don't use it.

tin2404 said:
You DON'T need permissive kernel for v4a any more..after hundereds of trials and errors I just downloaded newest apk from original v4a thread, put it in private-apps folder then set correct permitions rw-r-r, restarted device and it works flowellesly ! I have stock enforced kernel.
Click to expand...
Click to collapse
Tried hundered of ways here as well,
Mine just keeps asking to install the damn driver all the time mate, and even if installed, after reboot - it just asks again to install/update the driver again.
Tried with the su.policy zip flash as well. Still cant get it to work!
Tried with the MM compatible newest APK and placed it in Priv-app. Guess that's what you did too. Cant figure out what I'm missing here.

It happens to me also.That means you did NOT properly root device.Error with constant driver install is because busybox..I rerooted device ,wiped data for SU, and granted permission to busybox again.DO NOT use any other Viper app then original one from thread !

tin2404 said:
It happens to me also.That means you did NOT properly root device.Error with constant driver install is because busybox..I rerooted device ,wiped data for SU, and granted permission to busybox again.DO NOT use any other Viper app then original one from thread !
Click to expand...
Click to collapse
Youv'e been a lot helpful mate,
I think I'm getting somewhere, Could you please tell me which busybox did you use?
Is it the Stericsson version, or the Meefik ?

Stericsson one. I hac problems as you did and concluded the most simple one was the best..All that modded Viper apps doesn't do any use.Just use original one,give permissions in private-apps, restart device and that is it

which music players support this? cuz so far all i see is status normal processing no

tin2404 said:
Stericsson one. I hac problems as you did and concluded the most simple one was the best..All that modded Viper apps doesn't do any use.Just use original one,give permissions in private-apps, restart device and that is it
Click to expand...
Click to collapse
Men! You put so much hope in my heart. Please, could you be so nice and prepare step by step to do list? I personally would ask you about 'give permissionso in private-apps'. Could you explain? Do you copy v4a to priv-apps? Where from? What permissions? And about busy box: when I open it it shows me that it is installed in su/xbin... in what folder did you install busybox? And one about reroot: did you go to su and choose: full unroot before flashing su again? And what about mount namespaces: checked or unchecked in su? Have to tell you that I've tried so much different ways and still v4a doesn't work. I would love to try your way but please put some lights here. Thanks!
SM-G935F powered by Echoe

I've tried my best, in all possible variables and finally decided to give up after wasting 3 straight days of a perfect weekend.
My Driver just doesn't stick and I've tried all alternative installation methods. I've kept backups of system/*.* so all damages were reversed without any flashing. Root, Busybox everything runs perfectly and tested everything for integrity.
So far I've cornered the issue to Systemless Root, which seems to be the only entity having issues with v4a. Until a proper answer is digged up, I'm gonna stick with my Note 5 which has this working on System-Mode Root. (The driver didn't stick on the Note 5 when I tried to use it with System-less) Luckily the Note 5 is still on LP, with Su 2.64.
Good Luck to those who are trying, and thanks to all who helped!

OK...I made comprehesive tutorial here
http://forum.xda-developers.com/s7-edge/themes/viper4android-proper-installation-t3340525

JazonX said:
I've tried my best, in all possible variables and finally decided to give up after wasting 3 straight days of a perfect weekend.
My Driver just doesn't stick and I've tried all alternative installation methods. I've kept backups of system/*.* so all damages were reversed without any flashing. Root, Busybox everything runs perfectly and tested everything for integrity.
So far I've cornered the issue to Systemless Root, which seems to be the only entity having issues with v4a. Until a proper answer is digged up, I'm gonna stick with my Note 5 which has this working on System-Mode Root. (The driver didn't stick on the Note 5 when I tried to use it with System-less) Luckily the Note 5 is still on LP, with Su 2.64.
Good Luck to those who are trying, and thanks to all who helped!
Click to expand...
Click to collapse
FRM300 said:
Men! You put so much hope in my heart. Please, could you be so nice and prepare step by step to do list? I personally would ask you about 'give permissionso in private-apps'. Could you explain? Do you copy v4a to priv-apps? Where from? What permissions? And about busy box: when I open it it shows me that it is installed in su/xbin... in what folder did you install busybox? And one about reroot: did you go to su and choose: full unroot before flashing su again? And what about mount namespaces: checked or unchecked in su? Have to tell you that I've tried so much different ways and still v4a doesn't work. I would love to try your way but please put some lights here. Thanks!
SM-G935F powered by Echoe
Click to expand...
Click to collapse
Has anyone managed to get it working? I've tried every single method to install it and still nothing!

csr.rocha said:
Has anyone managed to get it working? I've tried every single method to install it and still nothing!
Click to expand...
Click to collapse
Yes. Actually there is a perfect package from @guitardedhero. You have to be rooted, busyboxed, twrp'ed. Flash this: http://forum.xda-developers.com/attachment.php?attachmentid=3701983&d=1459364213
It is Viper Atmos Sony Beats edition working beautifully on ny S7E. Three more step to do after flashing: 1. freeze SoundAlive and AdaptSound, reboot. 2. go to system preferences and check whether Viper has memory access granted. 3. go to SuperSu and DISABLE 'Mount namespace separation', reboot. Done!
Btw. If you want to play with Profiles inside Viper, go to your internal memory using root explorer and inside Viper folder create folder called 'Profiles'.
Btw2. 6.0.1new abowe destroy your conf files. Hope you have backup.
Better flash @guitardedhero mod on fresh rooted rom. hope you enjoy.
Btw3. Sound is AMAZING!
S7E powered by Echoe™ v5

Thanks for your reply!
Just after I asked for help here, i found a driverless package from @guitardedhero that worked! Glad to know you did it too, mate! :highfive:

Working but 10 second later turn normal mod
Why do you think's going on?
For example in youtube, 10 second viber4android active, later deactivate.
SM-G935F cihazımdan Tapatalk kullanılarak gönderildi

How to remove Viper4android drivers

Hi all, I've had quite a few issues with Viper4android, including extreme battery drain (since installing my phone will drain from 80% to 0% overnight with no use), and inconsistent volume in various apps (Spotify only has about 60% volume output with random bursts to 100%).
How can I remove all of its components and revert back to stock? I'm guessing it's more involved than just reflashing the stock rom, perhaps I need radio files + others too
My phone is a Samsung s6 edge plus (SM-G928i).
Thank you all, and apologies if this is in the wrong place!

ReaperZ said:
Hi all, I've had quite a few issues with Viper4android, including extreme battery drain (since installing my phone will drain from 80% to 0% overnight with no use), and inconsistent volume in various apps (Spotify only has about 60% volume output with random bursts to 100%).
How can I remove all of its components and revert back to stock? I'm guessing it's more involved than just reflashing the stock rom, perhaps I need radio files + others too
My phone is a Samsung s6 edge plus (SM-G928i).
Thank you all, and apologies if this is in the wrong place!
Click to expand...
Click to collapse
Actually, its much easier than reflashing your ROM (though that would work fine too)
All you have to do is hit the menu button/3 dot icons>uninstall drivers>reboot. And you're done.

Freewander10 said:
Actually, its much easier than reflashing your ROM (though that would work fine too)
All you have to do is hit the menu button/3 dot icons>uninstall drivers>reboot. And you're done.
Click to expand...
Click to collapse
Thanks for the prompt reply! I'll give that a whirl

ReaperZ said:
Hi all, I've had quite a few issues with Viper4android, including extreme battery drain (since installing my phone will drain from 80% to 0% overnight with no use), and inconsistent volume in various apps (Spotify only has about 60% volume output with random bursts to 100%).
How can I remove all of its components and revert back to stock? I'm guessing it's more involved than just reflashing the stock rom, perhaps I need radio files + others too
My phone is a Samsung s6 edge plus (SM-G928i).
Thank you all, and apologies if this is in the wrong place!
Click to expand...
Click to collapse
This just removes the drivers, uninstalling the app after removing drivers and re-enabling your stock audio(if you had to remove/disable it), this should put you back to stock.
Freewander10 said:
Actually, its much easier than reflashing your ROM (though that would work fine too)
All you have to do is hit the menu button/3 dot icons>uninstall drivers>reboot. And you're done.
Click to expand...
Click to collapse
Sent from my SM-S903VL using Tapatalk

Droidriven said:
This just removes the drivers, uninstalling the app after removing drivers and re-enabling your stock audio(if you had to remove/disable it), this should put you back to stock.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Excuse my ignorance but could you tell me how to re-enable my stock audio? I get the feeling this was removed during the installation process

ReaperZ said:
Excuse my ignore but could you tell me how to re-enable my stock audio? I get the feeling this was removed during the installation process
Click to expand...
Click to collapse
By extracting a copy of the audioFX apk from your stock firmware
Or
By extracting it from a nandroid backup if you have one
Or
Find someone with your device and have them upload a copy of it.
Or
Find a copy with a Google search for:
"Audiofx.apk(or whatever the stock audio is called on your device) for (your model number and firmware version)
FYI, you would have had to manually remove or disable your stock audio yourself. It wouldn't have happened automatically, so if you yourself didn't remove/disable it then you probably don't have anything to worry about.
Sent from my SM-S903VL using Tapatalk

ReaperZ said:
Excuse my ignorance but could you tell me how to re-enable my stock audio? I get the feeling this was removed during the installation process
Click to expand...
Click to collapse
Did you flash V4A via recovery? Or did you install the app manually?
If you don't see the stock Equalizer in your app drawer then it was probably removed during installation of V4A (when done via recovery) but if it was installed manually then the equalizer app should still be installed/visible in your app drawer. All you have to do is open the app and toggle the on/off button.
If the app was removed though, you'll have to reflash your ROM to get it back.
NB 1. If stock EQ was already enabled, you might wanna disable it and give V4A another shot. As I've personally experienced issues with both of them enabled.
NB 2. Uninstalling the drivers practically kills the app. But you can go ahead and uninstall it as recommended by @Droidriven

Freewander10 said:
Did you flash V4A via recovery? Or did you install the app manually?
If you don't see the stock Equalizer in your app drawer then it was probably removed during installation of V4A (when done via recovery) but if it was installed manually then the equalizer app should still be installed/visible in your app drawer. All you have to do is open the app and toggle the on/off button.
If the app was removed though, you'll have to reflash your ROM to get it back.
NB 1. If stock EQ was already enabled, you might wanna disable it and give V4A another shot. As I've personally experienced issues with both of them enabled.
NB 2. Uninstalling the drivers practically kills the app. But you can go ahead and uninstall it as recommended by @Droidriven
Click to expand...
Click to collapse
I flashed a recovery file for it. So I might just take the easy route and reflash my rom I might give it another crack when I get my new phone in April / May!

Freewander10 said:
Did you flash V4A via recovery? Or did you install the app manually?
If you don't see the stock Equalizer in your app drawer then it was probably removed during installation of V4A (when done via recovery) but if it was installed manually then the equalizer app should still be installed/visible in your app drawer. All you have to do is open the app and toggle the on/off button.
If the app was removed though, you'll have to reflash your ROM to get it back.
NB 1. If stock EQ was already enabled, you might wanna disable it and give V4A another shot. As I've personally experienced issues with both of them enabled.
NB 2. Uninstalling the drivers practically kills the app. But you can go ahead and uninstall it as recommended by @Droidriven
Click to expand...
Click to collapse
Yep, my installations on all devices I've had have been via app which required me manually removing/disabling stock audio.
I've encountered installations on some devices that required using terminal emulator or adb shell to implement correctly, slightly tricky stuff that I don't remember the details for.
Sent from my SM-S903VL using Tapatalk

ReaperZ said:
I flashed a recovery file for it. So I might just take the easy route and reflash my rom I might give it another crack when I get my new phone in April / May!
Click to expand...
Click to collapse
I'm guessing your stock EQ was deleted then.
Just flash your ROM and you should be fine. Keep in mind though that any other additions/modifications you made to your system partition will be overwritten.

Uninstall Flashed App - Viper4Android
Hey folks,
I am new to xda and so this question might not be appropriate for this particular thread -- I don't know, I guess I'll take my chance. So, upon rooting my android device last week I went ahead and downloaded the Viper4Android audio enhancer as a zip, and installed it through the TWRP recovery terminal. This flashed the app on the phone drive. However, the Viper4Android driver is not installing properly and all my attempts to fix that are going in vain, thus I think the best solution is to uninstall the app and install a new package following a specific xda thread instructions to the letter. So my question is how do I uninstall a flashed app? I can't seem to find the app folder when the installation files are located. The app is present in my app menu. I am a root user and have directory apps like Root Explorer, Magisk Manager, BusyBox, RomToolbox etc. Btw, I've read most of this thread, and it mainly discusses the removal of the drivers. (Which I presume never installed in my phone anyways, as Viper4Android never worked -- hence why I am looking to uninstall the whole thing, and try anew). I have a Moto g5 plus.
How should I proceed? What's the best tool to uninstall a flashed Viper4Android App?
Any help would be much appreciated!
Thanks,

Sjbay93 said:
Hey folks,
I am new to xda and so this question might not be appropriate for this particular thread -- I don't know, I guess I'll take my chance. So, upon rooting my android device last week I went ahead and downloaded the Viper4Android audio enhancer as a zip, and installed it through the TWRP recovery terminal. This flashed the app on the phone drive. However, the Viper4Android driver is not installing properly and all my attempts to fix that are going in vain, thus I think the best solution is to uninstall the app and install a new package following a specific xda thread instructions to the letter. So my question is how do I uninstall a flashed app? I can't seem to find the app folder when the installation files are located. The app is present in my app menu. I am a root user and have directory apps like Root Explorer, Magisk Manager, BusyBox, RomToolbox etc. Btw, I've read most of this thread, and it mainly discusses the removal of the drivers. (Which I presume never installed in my phone anyways, as Viper4Android never worked -- hence why I am looking to uninstall the whole thing, and try anew). I have a Moto g5 plus.
How should I proceed? What's the best tool to uninstall a flashed Viper4Android App?
Any help would be much appreciated!
Thanks,
Click to expand...
Click to collapse
Did you solve it ?coz i have the same issue

I found a fix for a flashed Viper4Android
Just run the same package you used to install the V4A and it will remove it
Pretty simple.
hit the thanks button if I helped

MAST1999 said:
Just run the same package you used to install the V4A and it will remove it
Pretty simple.
hit the thanks button if I helped
Click to expand...
Click to collapse
Hi, this is my first xda post so there is no thanks button yet . But I'll go on ahead and say "Thank You". You solved my problem so easily.

Help!!!
Liens Sparks said:
Hi, this is my first xda post so there is no thanks button yet . But I'll go on ahead and say "Thank You". You solved my problem so easily.
Click to expand...
Click to collapse
Hello please what package did you install to remove the flashed viper android

Nexus 5 on 5.0.1 - installing Viper4Android 2.5.0.5 - Getting Processing: No

When I install V4A on my Nexus 5, install the Driver and reboot once more and try to use it, it just shows "Processing: No" in the Driver Status. Everything else is showing correctly.
Tried from Flashing Zip, to installing Apk, to putting the Apk in /priv-app/ and trying out the Compatibility Mode.
No Success out of any.
Also disabled "Music FX" as an App.
I'm slowly dying because of bad sound :c
How can I make it work again?

DanBeast1337 said:
I'm slowly dying because of bad sound :c
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=72026911&postcount=409

Flash Magisk v12 and enable Viper4Android module. Then push the apk to /system/app and give it rw-r--r-- permissons always works for me

mnsiw said:
https://forum.xda-developers.com/showpost.php?p=72026911&postcount=409
Click to expand...
Click to collapse
I love you. So simple but so effective, that zip worked!
THANKS!

DanBeast1337 said:
I love you. So simple but so effective, that zip worked!
THANKS!
Click to expand...
Click to collapse
You are welcome

Anyone else having issues flashing Xposed?

You may, or may not, have noticed Xposed for SDK27 came out today I for one, am hyped. However, I cannot get it to install. The app gives a 404 error when I try to download though through there. I can download through the official DB, but that doesn't work either, gives me a 'failed to mount /system'. I'm assuming there's some perms issue, but i'd rather not mess with it. I'm on a Verizon Pixel 2.
Edit:Systemless is out if you're having issues installing. But you won't pass safety-net.

D3RP_ said:
You may, or may not, have noticed Xposed for SDK27 came out today I for one, am hyped. However, I cannot get it to install. The app gives a 404 error when I try to download though through there. I can download through the official DB, but that doesn't work either, gives me a 'failed to mount /system'. I'm assuming there's some perms issue, but i'd rather not mess with it. I'm on a Verizon Pixel 2.
Click to expand...
Click to collapse
The Xposed zip failed to flash in twrp for me too. I'm on a Google bought device.
Edit
I get the same 404 error when attempting to download and install through the Xposed installer app.

jascolli said:
The Xposed zip failed to flash in twrp for me too.
Click to expand...
Click to collapse
Which is weird because @wanam is a tester on a Pixel 2 xD

D3RP_ said:
Which is weird because @wanam is a tester on a Pixel 2 xD
Click to expand...
Click to collapse
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.

wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Ahhhhh my man! Thank you!

wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Ok wait, it can't flash now because read only fs. To flash it through recovery I would need to restore stock recovery, right?

wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Thanks wanam, it worked perfectly!!

@wanam
Are there any modules that you have had success running on you pixel 2?

Darn. Framework shows that it is installed OK, but whenever I try to download a module the installer forces closed.

jascolli said:
Thanks wanam, it worked perfectly!!
Click to expand...
Click to collapse
wait what, how tf, did you just click install? Or did you install through recovery?

D3RP_ said:
wait what, how tf, did you just click install? Or did you install through recovery?
Click to expand...
Click to collapse
Download the Xposed zip, copy it and paste it here
"/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework"
In the Xposed installer app settings, check off "show outdated versions"
Then the zip that you posted will show up in the app to be installed.
Hope that makes sense...

Upon that, I'm faced with this issue:

jascolli said:
Download the Xposed zip, copy it and paste it here
"/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework"
In the Xposed installer app settings, check off "show outdated versions"
Then the zip that you posted will show up in the app to be installed.
Hope that makes sense...
Click to expand...
Click to collapse
No I got that far. I can't get it to install.

lps1014 said:
Upon that, I'm faced with this issue:
Click to expand...
Click to collapse
Same here pixel 2 xl magisk 15.2

lps1014 said:
Upon that, I'm faced with this issue:
Click to expand...
Click to collapse
It's a beta xD

wanam said:
Yeah i was running it for almost a week now on my Pixel2.
You cannot flash it through TWRP, the zip installer doesn't support A/B partition yet.
I used to install it through Xposed Installer App, if it doesn't show up the framework screen, check "Show outdated versions", copy the zip file to "/storage/emulated/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework" and re-open the app.
Click to expand...
Click to collapse
Wanam
What's the trick getting /system/framework read only when installing from Xposed installer.
Thanks
Edit: those getting the read only error using a regular pixel 2 or all xl? This might help them figure it out.

I was able to get mine installed using the steps from wanam. Had to place the file in the framework folder. After that it installed fine

bigbean172018 said:
I was able to get mine installed using the steps from wanam. Had to place the file in the framework folder. After that it installed fine
Click to expand...
Click to collapse
Pixel 2 xl? If so why are some of us getting the read only error. Anything with magisk?

Pixel 2, I have magisk installed as well.

bigbean172018 said:
Pixel 2, I have magisk installed as well.
Click to expand...
Click to collapse
Would be interesting to know if anyone with 2 xl has been able to install it. It seems to be an XL issue since it has not been tested yet officially.
Like it was said it's a beta. Can't always expect it to work the first time.