Ahoj, existuje možnost pracovat Dolby Atmos nebo Dolby Digital na skladě bez root?
Thanks Mike
If you mean stock ROM then the ony way is to have Magisc with specific module installed I believe. So you can't get that working without root. You could probably try and find a ROM that has it baked in and is not prerooted or unroot it after the installation but I'm not aware if there's one out there.
[QUOTE = "MocnePifko, příspěvek: 84088771, člen: 6359321"]
Pokud máte na mysli skladovou ROM, pak jediným způsobem je mít nainstalován Magisc se specifickým modulem. Takže bez root nemůžete pracovat. Pravděpodobně byste mohli zkusit najít ROM, která má zapečenou dovnitř a není po instalaci prerootována nebo vykořeněna, ale nevím, jestli tam nějaká je.
[/CITÁT]
Děkuji za informace. Ano, myslel jsem skladovou ROM. Zatím nechci root. Zvuk není příliš dobrý, takže jsem doufal alespoň v nějakou aplikaci.
If you're using headphones you can try "Settings/Sound & vibration/Sound effects", if you haven't already done that. There's an equaliser there. I am using a volume boosting app for my MI buds 2.0 (worst buy ever lol) to make the sound less thin.
To nebude fungovat. Odpusť můj jazyk, právě jsem použil Překladač Google
I used google translate for the above message. I hope you understand it lol.
Related
Greetings from Brasil !
Sorry if this isn't the right thread for this post,but i will risk it anyway.
I recently bought a Samsung galaxy 3 - I5800 here im Brasil,and it came with Eclair 2.1.
I know people found a way to upgrade it to Froyo 2.2,but what i want to know is :
1 - Will my swype keyboard method still work in portuguese (PTBR ) language ?
if no,is there any alternative swype keyboard that i will be able to install/replace the default one to make the correct language input work ?
2 - Will i loose all my apps ?
3 - Will i have to root it again ?
4 - In my opinion,this phone is sort of slow,most of games does not run smoothly and i experience lags ,will froyo increase my phone's performance ?
5 - Whats the difference between those Froyo "releases" of ROMS that i've found all over the internet ? Like JPA/JPM/JP6 or w.e .
Thanks in advance ,
Marcello Lins
i5800 froyo
Marcelo, eu instalei com o Odin a versão I5800XXJPF e tá rodando direitinho. Para resolver o problema do teclado em português, eu instalei o Samart Keybord Trial. é de graça e funciona até o T9. Se tiver alguma dúvida, é só falar... boa sorte, Edu
Use Titanium to backup all apps and system data, them use kyrillos 4.1 rom-i used for quite awhile-no problems (overclock version worked good too) though I wouldn't want to go higher than 866 for games-install setcpu to control max overclock.
I flashed quite a few times (currently using kyrillos 5.1) and used titanium to reinstall--everything worked perfectly!!!
Hi ! I'm italian ..i have a NEXUS S I9023 and i would like to install a custom rom , i don't choose because are all beatiful. I would like to install Miui because the custom rom based on 4.0.3 it's so beatiful but the battery during no more than 12 hours. Given i am italian , i can install : MIUI 2.3.7C or MIUI 2.2.24 ( pending language pack) .. which is better and why?
In the case there were rom better than miui , can you advise me and link ? Thanks so much!Sorry for my poor english
Installa la 4.0.4 IMM26 di evilisto, + la bluetooth patch che trovi nel thread + l'ultimo airkernel e avrai la migliore combo che ho trovato io finora come stabilità, performance, funzionalità e durata batteria
(I9023 white here)
Installa la 4.0.4 IMM26 di evilisto, + la bluetooth patch che trovi nel thread + l'ultimo airkernel e avrai la migliore combo che ho trovato io finora come stabilità, performance, funzionalità e durata batteria
(I9023 white here)
(I9023 white here)
Click to expand...
Click to collapse
IMM26 Bluetooth Patch .. but where i can take the last kernel , advise me a kernel...you use matrix or other kernel?
Andrew1998 said:
IMM26 Bluetooth Patch .. but where i can take the last kernel , advise me a kernel...you use matrix or other kernel?
Click to expand...
Click to collapse
I use Matr1x. It's awesome!
SM-P902 is Note Pro with 3G in Turkey.
There is no Stock Firmware on web. Even i requested from sammobile they didnt add firmware to their database.
is there anyway to get stock firmware just to repair if any soft brick happens to the device.
HERE is SM-P902 Stock firmware: http://www.woggy.org/rom-samsung-note-pro-12-2-3g-sm-p902-stock-rom/
Selam,
Stock firmware bulabiliriz mi acaba?
Bir de hangi cihazın firmware dosyası uyar acaba bu bizim 902 ye. 3G olup da Snapdragon olmayan bir bizim ülkedeki sanki...
Teşekkürler
samsung galaxy not 12.2 sm-p902 firmware
sirjohn78 said:
Selam,
Stock firmware bulabiliriz mi acaba?
Bir de hangi cihazın firmware dosyası uyar acaba bu bizim 902 ye. 3G olup da Snapdragon olmayan bir bizim ülkedeki sanki...
Teşekkürler
Click to expand...
Click to collapse
Hello guys,
I deleted stock firmware to install for p902 but I couldn't find any firmware. I already tried to install p901 but it boots only in TWMP. Actually the rom installed in success. I tried several time . Do you have any suggestions.
Emre kardeş,
Benim de p902 uçtu gitti. Bir tek CM 12 (p900 için olan sürüm) yüklenince çalışıyor şimdi . Onda da tabii ki 3G olmadığı için wireless ikonu yanında mobile data ikonu yok. Sen bulabildin mi birşey. Ben root ettim CF root ile p901 3G versiyonu ile. Sonra yine 901 3G ye uygun TWMP recovery yükledim. Ama hangi romu kurarsam kurayım boot edince TWMP ye düşüyorum sistem açılmıyor CM 12 hariç.
Ben araştırıyorum sende bulursan birşeyler yazarmısın. Mail adresim de [email protected] bu arada.
Selamlar
thesin2 said:
Hello guys,
I deleted stock firmware to install for p902 but I couldn't find any firmware. I already tried to install p901 but it boots only in TWMP. Actually the rom installed in success. I tried several time . Do you have any suggestions.
Emre kardeş,
Benim de p902 uçtu gitti. Bir tek CM 12 (p900 için olan sürüm) yüklenince çalışıyor şimdi . Onda da tabii ki 3G olmadığı için wireless ikonu yanında mobile data ikonu yok. Sen bulabildin mi birşey. Ben root ettim CF root ile p901 3G versiyonu ile. Sonra yine 901 3G ye uygun TWMP recovery yükledim. Ama hangi romu kurarsam kurayım boot edince TWMP ye düşüyorum sistem açılmıyor CM 12 hariç.
Ben araştırıyorum sende bulursan birşeyler yazarmısın. Mail adresim de [email protected] bu arada.
Selamlar
Click to expand...
Click to collapse
Still searching. Made contact with samsung. Sent many mails to sammobile. Still no sound.
Hala araştırmaktayım. Samsung ile iletişime geçtim dönüş bekliyorum. Sammobile a kırk kez mail attım ses soluk yok. Büyük problem inşallah çözeriz.
Did you try P901 Firmware? It seems like its spec same as P902. And Kies doesnt have device info either. So Kies wont repair our device.
Bu arada p901 in donanımı bizim p902 ile aynı. Farkli bir ülkenin p901 firmware ini denedin mi? Denediysen bilgi verir misin?
Özellikle kies cihazı düzeltmedi mi bunu merak ediyorum?
p902
Denedim. İstersen numaranı mail at bana arayim. Uzun yani konu yazılacak gibi değil
Hey guys,
Just a friendly reminder - all posts on the board need to be made in English, per rule #4:
http://forum.xda-developers.com/announcement.php?a=81
Please either translate or modify the posts such that they are in English. Thank you.
Divine_Madcat said:
Hey guys,
Just a friendly reminder - all posts on the board need to be made in English, per rule #4:
http://forum.xda-developers.com/announcement.php?a=81
Please either translate or modify the posts such that they are in English. Thank you.
Click to expand...
Click to collapse
Of course, sorry about that. Since p902 special model for Turkey, these things happen
emremutlu said:
Of course, sorry about that. Since p902 special model for Turkey, these things happen
Click to expand...
Click to collapse
Not a problem; thanks for understanding (and that does make sense too).
thesin2 said:
Denedim. İstersen numaranı mail at bana arayim. Uzun yani konu yazılacak gibi değil
Click to expand...
Click to collapse
Hi again.
Did you do that phone conversation
Could you write a brief summary about using p901 firmware on our 902s?
Is It working? I am desperately searching for an updated firmware. I think the hardware is perfect for my requirements (screen size and the resolution) but the software is crap...
Sidesync kills the battery in a couple of hours even I don't use the tablet. Lag happens everywhere... Lock screen unresponsive many times... WiFi is not working well, too slow or not working at all..
I am also using Note 4 and 10 inch tablets are not big enough for me to use .... 12.2 is superb but the software.......
p902
sirjohn78 said:
Hi again.
Did you do that phone conversation
Could you write a brief summary about using p901 firmware on our 902s?
Is It working? I am desperately searching for an updated firmware. I think the hardware is perfect for my requirements (screen size and the resolution) but the software is crap...
Sidesync kills the battery in a couple of hours even I don't use the tablet. Lag happens everywhere... Lock screen unresponsive many times... WiFi is not working well, too slow or not working at all..
I am also using Note 4 and 10 inch tablets are not big enough for me to use .... 12.2 is superb but the software.......
Click to expand...
Click to collapse
Hello Guys,
p901 firmware is not working ( http://forum.xda-developers.com/galaxy-note-pro-12/development/rom-craftworks-v1-0-t2955038 ) I can install this with success but when reboot it doesnt reboot any time. at the end it boots to twrp...Also I tried 3 versions from sammobile p901 firmware ..these can not be installed with odin.. Always fail. (i installed p901 cf root & p901 version of twrp with succes while doing these rom updates)
p905lte can not be installed cf root twmp can not be installed too. the cpu is different but i tried anyway.
p900 version of cf root and twmp can be installed and cyonogenmod 12 can be installed. i can get this work but no 3G of course. So this is not what I want
Is there anybody that have proper versions for sm-p902 firmware, cf root and TWRP . Also how to install for me to check if I do any mistekes while installing with odin 3.07 or 3.09
I'M STILL SEARCHING FOR HELP FOR SM-902 WIFI & 3G (TURKEY MODEL OF SM-P901 )
EMRE WHERE ARE YOU )) ??????
Hi Sinan
i want you to try something.
Install working version of CM as you said.
Then export one of P901 Firmware
You should have "boot.img, cache.img, hidden.img, recovery.img, system.img, modem.bin, sboot.bin" seperately.
First Flash "system.img" via Odin or TWRP
Try to open your device. if it fails go on and flash boot.img and retry to open your device again.
The main idea here is keep working boot and kernel but flash the original system file.
you know cant risk my device to try them. just write the results here please
By the way.
Here is my mail to samsung turkey and their answer.
Sorunuz
Kusura bakmayın ama bu belki 50. Mailim. Daha seçeneklerde SM-P902 bile yok bu nasıl bir hizmettir anlamadım.
Muadili olan cihaz p901 sürekli güncelleme alırken p902 neden almıyor anlamadım. Global desteğe bile mail attım kimse dönüş yapmadı.
Cihazda Kies desteği yok Ota update yok. Bu nasıl başı boş bırakılmış bir cihazdır. Yığınla para veriyoruz kıçı kırık telefonlar kadar hizmet alamıyoruz.
Müşterilerinizin taleplerini göz ardı ediyorsunuz. Samsungun kullanıma söz verdiği hizmetleri alamıyorum.
Acil olarak bir açıklama bekliyorum.
Müşteri temsilcisi cevabı
Sayın Emre Mutlu,
Samsung Electronics Türkiye ile irtibata geçtiğiniz için teşekkür ederiz. Konu ile ilgili cevabımız aşağıda yer almaktadır.
SM-P902 model cihazınızın en güncel işletim sistemi "Android 4.4.4 KitKat" versiyonudur. Cihazınız için yeni bir güncelleme yayınlanıp yayınlanmayacağı ile ilgili tarafımızda henüz resmi bir bilgi bulunmamaktadır.
Tarafımıza iletmiş olduğunuz görüş ve önerileriniz ilgili birimlerimiz ile paylaşılmıştır. Konu ile ilgili geri bildirimlerinizi hizmetlerimizi iyileştirmek için kullanacağımızı belirtmek isteriz.
Değerli görüş ve önerilerinizi bizimle paylaştığınız için teşekkür ederiz.
Sorry but it has to be Turkish.
Any progresses with P902? Can anyone give a short info from start to finish for installing custom ROM on that device?
Bir gelişme var mı? Birisi baştan sonra bu cihazda Custom ROM yüklemek için gereken işlemleri kısaca özetleye bilir mi?
@svet6ma here is a very good how-to although for S4, procedures should be identical.
Dear all,
Here is the official ROM for the Teclast P98 4G A8H8 Android 5.0 Lollipop.
I notice that is sometimes laggy and slow.
The package contains scatter file and all binary files nedeed to flash this rom.
Let's start creating custom ROMs!!
Here is the link
https :// mega.nz/#!d9cCABaa!hYQ6rPa4cAf13RzOqbyOrws8La-SIN6YdVygbubjOb0
Good work!
where did you find it?
THANX
Tthank you for the link. One major problem I find with this ROM is the exaggerate use of RAM. At startup almost half of it is already gone and you easily reach 85% during normal use. Sadly I never tried making my own roms:cyclops:
hocuspocus69 said:
where did you find it?
THANX
Click to expand...
Click to collapse
A guess:
http://bbs.teclast.com/thread-410644-1-1.html
http://share.weiyun.com/e75a81eb35e1bb690342714eec55434e
Is it possible to flash this (A8H8 Lollipop) to A8H6 version?
Which sp flashtools to use? Whenever I want to load the scatter I get: "The load scatter file is invalid!". I have flash tool v5.1516.00
Anybody tried this?
Io ho teclast p98 4g con Android 5.0, ma avevo molti problemi in meno quando avevo il p98 3g con Android 4.4. Questa è una custom rom con tutti i problemi relativi con le sincronizzazione alle varie app. Ha un launcher peggiore dello stok originale di Android 5 ..... Per cui preferivo l'altro modello.
Gigisl said:
Io ho teclast p98 4g con Android 5.0, ma avevo molti problemi in meno quando avevo il p98 3g con Android 4.4. Questa è una custom rom con tutti i problemi relativi con le sincronizzazione alle varie app. Ha un launcher peggiore dello stok originale di Android 5 ..... Per cui preferivo l'altro modello.
Click to expand...
Click to collapse
I do have p98 4g (a8h9) with android 5.0 too, and i dont have any problems. I rooted the tablet, with the recovery of hanuma posted by hocuspocus on freaktab. Uninstalled all the chinese bloatware, install nova launcher and deactivate the default one with Titatnium, deactivate remaining chines apps i dont need. And now everything is running fine.
The only thing is that the rooting method is a little bit tricky. You need the right drivers installed, the supersu.zip on the sd card. Then flash the recovery via sp flash tools. Boot into recovery. The recovery is headfirst and touch is not working. So need to plug in a usb mouse via otg and then install the supersu.zip using the usb mouse.
Where can I get recovery for p98 4g (a8h9)
I have a KR8035 multimedia station, currently Android 4.4.4 is installed, I would like to upload a newer Android, but I'm green in this topic, maybe someone of you would give me a link to the appropriate software, and guide me step by step on how to install it?
Posiadam stację multimedialną KR8035 obecnie jest zainstalowany Android 4.4.4 , chciał bym wgrać jakiegoś nowszego Androida ale jestem zielony w tym temacie może by ktoś z Was podał mi link do odpowiedniego oprogramowania, i poprowadził krok po kroku jak to zainstalować ?