Greetings from Brasil !
Sorry if this isn't the right thread for this post,but i will risk it anyway.
I recently bought a Samsung galaxy 3 - I5800 here im Brasil,and it came with Eclair 2.1.
I know people found a way to upgrade it to Froyo 2.2,but what i want to know is :
1 - Will my swype keyboard method still work in portuguese (PTBR ) language ?
if no,is there any alternative swype keyboard that i will be able to install/replace the default one to make the correct language input work ?
2 - Will i loose all my apps ?
3 - Will i have to root it again ?
4 - In my opinion,this phone is sort of slow,most of games does not run smoothly and i experience lags ,will froyo increase my phone's performance ?
5 - Whats the difference between those Froyo "releases" of ROMS that i've found all over the internet ? Like JPA/JPM/JP6 or w.e .
Thanks in advance ,
Marcello Lins
i5800 froyo
Marcelo, eu instalei com o Odin a versão I5800XXJPF e tá rodando direitinho. Para resolver o problema do teclado em português, eu instalei o Samart Keybord Trial. é de graça e funciona até o T9. Se tiver alguma dúvida, é só falar... boa sorte, Edu
Use Titanium to backup all apps and system data, them use kyrillos 4.1 rom-i used for quite awhile-no problems (overclock version worked good too) though I wouldn't want to go higher than 866 for games-install setcpu to control max overclock.
I flashed quite a few times (currently using kyrillos 5.1) and used titanium to reinstall--everything worked perfectly!!!
Ultimamente non sopportavo più bluestack, ne a casa, ne in ufficio...
Cosi mi sono detto, magari posso rendere portable il pacchetto di google android emulator, con jelly bean, a tempo perso ci sono riuscito.
supporta l'accelerazione x86 HAXM e accelerazione GPU
Per il corretto utilizzo consiglio di installare il pacchetto di driver Intel HAXM, lo trovate nella cartella dentro al pacchetto:
extras\intel\Hardware_Accelerated_Execution_Manager\
a segutio avvite il file:
jar of beans.exe
attendete l'avvio di android e divertitevi.
per praticità ho integrato un pulsante per installare gli apk...non si sa mai.
per uscire dal fullscreen premete: ALT+ENTER
un grazie è molto gradito.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lately I could not bear Bluestack, it at home, in the office he ...
So I said to myself, maybe I can make the package portable google android emulator with jelly beans, in his spare time I did it.
acceleration support HAXM x86 and GPU acceleration
For the correct use advise you to install the driver package Intel HAXM, can be found in the folder in the package:
extras \ intel \ Hardware_Accelerated_Execution_Manager \
segutio avvite to the file:
jar of beans.exe
wait for the launch of Android and have fun.
for convenience I integrated a button to install the apk ... you never know.
to exit fullscreen press: ALT + ENTER
thanks is very welcome.
translated with google translator
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Android Jelly Bean 4.1 from google SDK
(search chef for custom rom)
NEW BETA!!!!
DOWNLOAD JAR OF BEANS - BETA2 REPACK BUGFIXED
new:
SD CARD MANAGER INCLUDED
BUGFIX user select and delete after BETA2
added custom settings for each user
added resolutions:
800x480
1024x600
1280x768
1400x900
1920x1080
old:
other bugs fix
ADDED MULTI USERDATA (beta)
added custom Port/Adb Port (beta)
added option panel, with RAM size and Verbose on/off (alpha)
minor bugfix (window sizeble, debug frame dimension ecc) (alpha)
alert to end of "install apk" (alpha)
bugs:
hard keyboard dont work
Wow......
Great project you have started
Accept first THANKS from me
UPDATE! new setting and resolution
up for updater
IMPORTANT
up for updater
other update, VIRTUAL SDCARD SUPPORT
up for updater
Dear all,
Here is the official ROM for the Teclast P98 4G A8H8 Android 5.0 Lollipop.
I notice that is sometimes laggy and slow.
The package contains scatter file and all binary files nedeed to flash this rom.
Let's start creating custom ROMs!!
Here is the link
https :// mega.nz/#!d9cCABaa!hYQ6rPa4cAf13RzOqbyOrws8La-SIN6YdVygbubjOb0
Good work!
where did you find it?
THANX
Tthank you for the link. One major problem I find with this ROM is the exaggerate use of RAM. At startup almost half of it is already gone and you easily reach 85% during normal use. Sadly I never tried making my own roms:cyclops:
hocuspocus69 said:
where did you find it?
THANX
Click to expand...
Click to collapse
A guess:
http://bbs.teclast.com/thread-410644-1-1.html
http://share.weiyun.com/e75a81eb35e1bb690342714eec55434e
Is it possible to flash this (A8H8 Lollipop) to A8H6 version?
Which sp flashtools to use? Whenever I want to load the scatter I get: "The load scatter file is invalid!". I have flash tool v5.1516.00
Anybody tried this?
Io ho teclast p98 4g con Android 5.0, ma avevo molti problemi in meno quando avevo il p98 3g con Android 4.4. Questa è una custom rom con tutti i problemi relativi con le sincronizzazione alle varie app. Ha un launcher peggiore dello stok originale di Android 5 ..... Per cui preferivo l'altro modello.
Gigisl said:
Io ho teclast p98 4g con Android 5.0, ma avevo molti problemi in meno quando avevo il p98 3g con Android 4.4. Questa è una custom rom con tutti i problemi relativi con le sincronizzazione alle varie app. Ha un launcher peggiore dello stok originale di Android 5 ..... Per cui preferivo l'altro modello.
Click to expand...
Click to collapse
I do have p98 4g (a8h9) with android 5.0 too, and i dont have any problems. I rooted the tablet, with the recovery of hanuma posted by hocuspocus on freaktab. Uninstalled all the chinese bloatware, install nova launcher and deactivate the default one with Titatnium, deactivate remaining chines apps i dont need. And now everything is running fine.
The only thing is that the rooting method is a little bit tricky. You need the right drivers installed, the supersu.zip on the sd card. Then flash the recovery via sp flash tools. Boot into recovery. The recovery is headfirst and touch is not working. So need to plug in a usb mouse via otg and then install the supersu.zip using the usb mouse.
Where can I get recovery for p98 4g (a8h9)
CyanogenMod 13.0 for the Memopad FHD 10 4G - ME302KL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
USB Pendrive
Ext SDcard
Deep Sleep
Front and Back Camera
and other things...
Bugs
Snap Camera Preview Size is wrong. Use Open camera APP or google camera from android 5.1
Extra Feature:
USB Fast Charge (enable it trought kernel audiutor). Charge the battery more quickly via usb cable
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip
8. Install GAPPS
9. Install Boot.img to fix random reboot during boot process
10. Reboot to system
Enjoy Android 6.0.1 !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: https://www.androidfilehost.com/?fid=457095661767144167
Last Release by GiGISSIMO : https://www.androidfilehost.com/?fid=745425885120714725 (does not need kernel fix)
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
Download NEW TWRP Recovery for Marshmellow by SevenMaxs :http://forum.xda-developers.com/showpost.php?p=68444210&postcount=44
FIX:
Download Boot img to fix then random reboots during android boot process : http://forum.xda-developers.com/showpost.php?p=68589361&postcount=113 (You have to use Kernel A version.)
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/Android_Kernel_ME302KL_CM13
The rom is the Nexus 7 Official CM13.0 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 13.0 for Me302kl, ROM for the Asus Memopad FDH 10 4G
ROM OS Version: 6.0.1
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Beta1, Stable
Hi yattodettaman,
remove the two spaces after "if" and "of" in recovery installation command. If someone use copy and paste gets error.
the right command is:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p25
bye (i hope to try the rom today )
carlo.bar said:
Hi yattodettaman,
remove the two spaces after "if" and "of" in recovery installation command. If someone use copy and paste gets error.
the right command is:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p25
bye (i hope to try the rom today )
Click to expand...
Click to collapse
Spaces removed... thank you ! Post your feedback when you'll try the new rom
Everything works just great!
I wasn't even sure if it'd work on my device, what a pleasant surprise.
Thank you very much.
By the way, there is no step for "Install GApps" in the main post (it's an obvious step, but still).
Hi!
I'v bought a refurbished ME302KL (and will sell my ME302C).
Now, as soon as I get it shipped i'll follow this instructions to get Android 6.0.1
The instructions in this post are the only things needed to get from 4.2.2 stock to 6.0.1 CM 13?
These steps:
8. THIS STEP IS EXTREMELY NEEDED: Make a backup of system partition
9. THIS STEP IS EXTREMELY NEEDED: Advanced wipe - Wipe only system partition
10. THIS STEP IS EXTREMELY NEEDED: restore system backup
are no longer needed or I've got to do CM 12.1 (as per your post there) and THEN install CM13?
Thanks a lot!
And this?
12. Install Boot.img zip
Sorry for all this questions!!!
wrong info, removed
You don't need to install any boot.img.
Just follow the instructions.
Steps 8 to 10 are not needed.
Thank you, i reinstalled without boot.img this time. After a fairly long wait, it booted into welcome screen.
Can I install pico Gapps or it's not preferred like the former rom CM12?
yattodettaman said:
Spaces removed... thank you ! Post your feedback when you'll try the new rom
Click to expand...
Click to collapse
unfortunately as same as cm 12.1 i have problems with startup: asus logo and then black screen and then asus logo .. and so on .. sometime three times, sometime 6.. and it's not limited at the first installation but also for all reboot.
In cm13 does not work miracast but this is a cm problem not yours rom.
As sama as cm12.1 blue flickering screen during digitation is solvable disabling hw overlay in developer option.
carlo.bar said:
unfortunately as same as cm 12.1 i have problems with startup: asus logo and then black screen and then asus logo .. and so on .. sometime three times, sometime 6.. and it's not limited at the first installation but also for all reboot.
In cm13 does not work miracast but this is a cm problem not yours rom.
As sama as cm12.1 blue flickering screen during digitation is solvable disabling hw overlay in developer option.
Click to expand...
Click to collapse
I am having the same issue after I fully shut down the device and try to boot.
yattodettaman said:
You don't need to install any boot.img.
Just follow the instructions.
Steps 8 to 10 are not needed.
Click to expand...
Click to collapse
Thanks!
yattodettaman,
Thank you for the ROM!
Good job!!!:good::good::good:
Bello rivedere yatto all'opera, soprattutto dopo aver fatto volare il mio vecchio 810c ora lo ritrovo proprio su un altro device in mio possesso che ha subito la stessa sorte del MediaPad (cioè abbandonato).
Grazie mille!!!!
Non vedo l'ora di flashare stasera!
Ciao,
anche tu hai acquistato questo tablet così bello ma così sfortunato, a causa di ASUS. Mai più ASUS....
cmq ci ho pensato io.... fortunatamente è praticamente un Nexus7.... Fammi sapere se ti piace la rom !
yattodettaman said:
Ciao,
anche tu hai acquistato questo tablet così bello ma così sfortunato, a causa di ASUS. Mai più ASUS....
cmq ci ho pensato io.... fortunatamente è praticamente un Nexus7.... Fammi sapere se ti piace la rom !
Click to expand...
Click to collapse
Sicuro! Appena torno a casa alle 8 procedo poi ti faccio sapere... Per le GApps io su CM di solito uso quelle di DeltaDroid, vanno bene o mi consigli altre?
Per fortuna che ci hai pensato tu, perchè avevo trovato qualcosina su 4pda ma oltre alla recovery, un kernel moddato ed un paio di rom schifezza sempre basate sulla stock non avevo trovato nulla!!!! E dire che quando uscì non costava poco...
GiGiSSiMo said:
Sicuro! Appena torno a casa alle 8 procedo poi ti faccio sapere... Per le GApps io su CM di solito uso quelle di DeltaDroid, vanno bene o mi consigli altre?
Per fortuna che ci hai pensato tu, perchè avevo trovato qualcosina su 4pda ma oltre alla recovery, un kernel moddato ed un paio di rom schifezza sempre basate sulla stock non avevo trovato nulla!!!! E dire che quando uscì non costava poco...
Click to expand...
Click to collapse
non aggiornare mai via OTA perchè viene visto come nexus 7
anyone can make a video review ? thanks
yattodettaman, hello. Thank you so much for the 13 cm on the Asus me302kl.
You you tell me how to install gapps? OpenGapps cause mistake, choosing different sets for x32, 6.0.
Hello!
I am looking for a ROM for Gigabyte TM75A-V, it has android 4.0.4 (some devices recognize it as Commodore TM75A-V)
I would like to use it, at least, to read PDF, because the touch screen does not work. The Switch Acces function of android would be very useful in my situation, but for v4.0.4 it is not available, so I would like to update the android. (Also, I could install an app to remotely control the device, I can't find one that works)
I can't find a ROM for this model anywhere, maybe here can help me, if other information about my device is needed let me know.
Thanks!
Side-remark:
Installing a Custom ROM requires a Custom Recovery ( CWM / TWRP ) gets flashed as 1st thing of all things.
Hola
Temple98 yo tengo el mismo inconveniente .... esperemos poder encontrar esa hermosa ROM
https://tweakdroid.com/custom-rom/gigabyte-tm75a-v/#toc2 aqui hay algo quizas puede servir