Related
Hi,
We all felt problem of LAGGNESS and PERFORMANCE from our beast after flashing the custom ROMs. No way problems could not be solved although flashing official stock ROM through odin.
HERE HOW TO SOLVE THE PROBLEMS.
First of all you have to download Smart Switch( Official PC suite)
and then simple flash ROM through the suite. DONE af
Just download SMART SWITCH from http://www.samsung.com/in/support/smartswitch/ to your pc.
BOOT your phone to DOWNLOAD mode [power+volume down+home key while phone in switched off mode]
Go to smart switch and press EMERGENCY SOFTWARE RECOVERY AND ... & follow the instruction.
Done!!!!!
HOPE UR PROBLEM WILL BE SOLVED LIKE ME
------------------------------------------------------
I have not yet install any CUSTOM ROM. So don"t know about performance in Custom ROM. If u have tried pls report asap.
I recommend INSTALL RR 6.0 (Only big problem is networkstabilty, others are okay).
Video guide :
itsmedRb said:
hey
Just download SMART SWITCH from http://www.samsung.com/in/support/smartswitch/ to your pc.
BOOT your phone to DOWNLOAD mode.
Go to smart switch and press EMERGENCY SOFTWARE RECOVERY AND ... & follow the instruction.
Done!!!!!
HOPE UR PROBLEM WILL BE SOLVED LIKE ME
Click to expand...
Click to collapse
btw then I can flash roms like usual? and it wont bring back the same problem?
Hammad1029 said:
btw then I can flash roms like usual? and it wont bring back the same problem?
Click to expand...
Click to collapse
I have not checked. pls report if u find
itsmedRb said:
I have not checked. pls report if u find
Click to expand...
Click to collapse
when I open smart switch, it say's that the device isn't supported
---------- Post added at 02:27 PM ---------- Previous post was at 01:38 PM ----------
itsmedRb said:
I have not checked. pls report if u find
Click to expand...
Click to collapse
says unsupported only when i'm in the download mode and not when the os is booted
hammad1029 said:
when i open smart switch, it say's that the device isn't supported
---------- post added at 02:27 pm ---------- previous post was at 01:38 pm ----------
says unsupported only when i'm in the download mode and not when the os is booted
Click to expand...
Click to collapse
go to site menu bar and press device initial recovery and initialisation.
itsmedRb said:
go to site menu bar and press device initial recovery and initialisation.
Click to expand...
Click to collapse
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Hammad1029 said:
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Click to expand...
Click to collapse
MODEL NO SM-G360H
S/N NO- remove battery and see on the back panel
itsmedRb said:
MODEL NO SM-G360H
S/N NO- remove battery and see on the back panel
Click to expand...
Click to collapse
I did it and installed rr 6.0 and its smooth as ****(at least for now) and so you can add to the thread that roms work and the method works too
Can I use the tar.md5 file in this tool also?? Like Odin?
Doesn't work. If you have flashed ANY THING on your out-of-the-box firmware, it will give you lag whether you flash/format and reinstall STOCK rom. If you can feel the smoothness again, don't get too excited, the lag will come again within 15 days.
Once you flash there is no going back.
It just install the very first firmware of the phone. This won't make difference tho
---------- Post added at 04:04 AM ---------- Previous post was at 03:49 AM ----------
Since I can't post my feedback to hashtag new PAC ROM I wrote it here instead. So I just flash it in a clean way. From clearing system and all and back to stock install root kernel then twrp then flash the PAC ROM clean way. And after testing
And it takes I thing more than 30mins to flash the ROM. And after testing the ROM is extremely laggy and I found resurrection remix way smoother than the new PAC ROM
---------- Post added at 04:10 AM ---------- Previous post was at 04:04 AM ----------
@[email protected]
Anyway how to tag a user in a post or reply?
Sorry a new member here
---------- Post added at 04:29 AM ---------- Previous post was at 04:10 AM ----------
[email protected]
The lag is back! What do i do?!!!
Hammad1029 said:
The lag is back! What do i do?!!!
Click to expand...
Click to collapse
Wipe and flash, lol. Cp is ?
Bro it's crap
This only reflash the firmware. As soon as there are apps, the phone will get laggy. So don't be excited.
Placebo. There's no reason a why a wipe makes device lagfree except for the first few hours..
rms112 said:
Placebo. There's no reason a why a wipe makes device lagfree except for the first few hours..
Click to expand...
Click to collapse
True.
Will this work with Hashtags 7.1.2 rom?
Hammad1029 said:
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Click to expand...
Click to collapse
Video guide added as well in Op. check
Video added in OP.
Please note phone will be faster as you new phone you have bought. (Later lag, that's blame SAMSUNG)
Hay.i have an idea. . . .i tryed it and it works for me, . .go try your self.but you will lost your data.so backup 1st.
1st step=>you nead stock rom,
2nd step=>go to stock recovery and do wipe and factry reset several time(3-5),
3rd and last step=>go to setings and do a factry reset from there,
After 3rd step you will feel the light of the rom like 1st day you buy it.!
Hi,
I have just buy a mate 8, and it was already on NXT-L29C432B560.
What I want to do is downgrade to Marshmallow for install Xposed.
But I'm not sure about the way to do that. Can I just put a NXT-L29-B320 on the phone and flash it the TWR ?
Actually I plan to install this one :
https://forum.xda-developers.com/mate-8/development/rom-stock-b162-rooted-t3336931
But if you have any advices about another ROM who could be a better choise I'm hearing you.
Best regards.
FR4YEUR said:
Best regards.
Click to expand...
Click to collapse
No... YOU HAVE TO TAKE THIS SOLUTION!!!
If your phone model is european, I've a rollback package for C432B560 on my Home-PC.. . If you want to I can upload it anywhere. But tonight!
Thanks Franzyboy, it's very helpfull, I confess than I'm a little bit lost at this point.
It will be nice if you can upload this
I will do some search on my side to see if I can't find this firmware by myself, I'll let you know if I do.
FR4YEUR said:
Thanks Franzyboy, it's very helpfull, I confess than I'm a little bit lost at this point.
It will be nice if you can upload this
I will do some search on my side to see if I can't find this firmware by myself, I'll let you know if I do.
Click to expand...
Click to collapse
OK. I will upload it in the evening!
I've found the C432B560 files, but in fact I can find the c432B320 for marshmallow, by any chance have you also this file ?
UPDATE : In fact the C432B560 I have doesn't work, recovery fail after 5%... So I'm still interested but your files
FR4YEUR said:
I've found the C432B560 files, but in fact I can find the c432B320 for marshmallow, by any chance have you also this file ?
Click to expand...
Click to collapse
Yes
---------- Post added at 04:10 PM ---------- Previous post was at 04:07 PM ----------
. @FR4YEUR
You can also find it here!
http://hwmt.ru/oth/HWFF/info/view.php?find_model=NXT-L29C432
That's perfect.
Thanks for all this help.
I'll download all I need, and try to do the trick
Are you currently on Mate 8, which ROM do you use ?
I received mine yesterday, but the last owner of the device, it does an unclean install of the ROM, no keybord just google voice input and no bluetooth anymore. I hope I'll can solve the prob
FR4YEUR said:
That's perfect.
Thanks for all this help.
I'll download all I need, and try to do the trick
Are you currently on Mate 8, which ROM do you use ?
I received mine yesterday, but the last owner of the device, it does an unclean install of the ROM, no keybord just google voice input and no bluetooth anymore. I hope I'll can solve the prob
Click to expand...
Click to collapse
Yes I've the Mate 8. I'm with the B560... No problem for me. I'm rooted and I made few modifications, but they are minors.
---------- Post added at 04:47 PM ---------- Previous post was at 04:45 PM ----------
. @FR4YEUR
To fix your issue, there is another solution.
Install your firmware via dload - the one you have now.
@franzyroy
it's that I try to do, but when I try to flash with "dload" method, it fails at 5%, and I really need bluetooth. Maybe I could try with an higher version of the firmware what do you think ?
How have you tweak your rom ? The thing I really want is to change the dpi setting (don't need a huge screen for big icones...), I've seen a method with adb, but for me it only work before I restart the phone.
FR4YEUR said:
@franzyroy
it's that I try to do, but when I try to flash with "dload" method, it fails at 5%, and I really need bluetooth. Maybe I could try with an higher version of the firmware what do you think ?
How have you tweak your rom ? The thing I really want is to change the dpi setting (don't need a huge screen for big icones...), I've seen a method with adb, but for me it only work before I restart the phone.
Click to expand...
Click to collapse
I forgot, like you are with the B560, you can't install lower. You have to make a rollback to have the B320.
No tweaks but use some scripts to have the double tap by example. You also have a script for the icons size.
franzyroy said:
I forgot, like you are with the B560, you can't install lower. You have to make a rollback to have the B320.
No tweaks but use some scripts to have the double tap by example. You also have a script for the icons size.
Click to expand...
Click to collapse
And if I try to install again the C432B560 how I have to proced ?
In fact this ROM isn't bad, but I really need the bluetooth, and I hope a clean install can solve the prob. But when I try to install the C432B560, it always fail at 5%...
FR4YEUR said:
And if I try to install again the C432B560 how I have to proced ?
In fact this ROM isn't bad, but I really need the bluetooth, and I hope a clean install can solve the prob. But when I try to install the C432B560, it always fail at 5%...
Click to expand...
Click to collapse
Is it the dload which fails?
You can try with TWRP.
franzyroy said:
Is it the dload which fails?
You can try with TWRP.
Click to expand...
Click to collapse
Yes, the dload doesn't work.
I take it with TWRP, but still no bluetooth.
I don't now what to do, any ideas ?
FR4YEUR said:
Yes, the dload doesn't work.
I take it with TWRP, but still no bluetooth.
I don't now what to do, any ideas ?
Click to expand...
Click to collapse
Your experience with the bluetooth is the problem of lot of people. For certains, it was due to the root. But there, not your case. I don't see!
Did you install the both files? update.zip and update-data.zip.
update-data.zip
I havn't install this files cause I don't have it. Where can I find it ?
FR4YEUR said:
update-data.zip
I havn't install this files cause I don't have it. Where can I find it ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
Ok, everythink works right now !
Thanks a lot for you help and your time.
FR4YEUR said:
Ok, everythink works right now !
Thanks a lot for you help and your time.
Click to expand...
Click to collapse
Great!:laugh:
Hello everyone, I have a big problem here
Today finally finish my wait time to unlock the bootloader
I decided to do it and install the ROM by xiaomi.eu
When I completed the installation and had the cell phone ready I realized that the camera wasn't working :crying: :crying:
I tried everything, i flash the rom for fastboot and camera still don't working
Most likely, that is a hardware failure, but if so, what could I do to repair it?
---------------------------------------------------------------------------------------------
Hi i finally fixed it
follow this tutorial
https://forum.xda-developers.com/red...tooth-t3823622
and the fastboot rom is here
https://en.miui.com/a-234.html
try flash stock rom with this tool https://github.com/Saki-EU/XiaomiADBFastbootTools/releases/
The same thing happens here, however on the MIUI rom the camera runs sometimes
Hi i finally fixed it
follow this tutorial
https://forum.xda-developers.com/re.../tutorial-fix-sensors-wifi-bluetooth-t3823622
and the fastboot rom is here
https://en.miui.com/a-234.html
mudkipxd said:
Hi i finally fixed it
follow this tutorial
https://forum.xda-developers.com/re.../tutorial-fix-sensors-wifi-bluetooth-t3823622
and the fastboot rom is here
https://en.miui.com/a-234.html
Click to expand...
Click to collapse
For the Redmi Note 6 Pro ?!
douglassillva said:
For the Redmi Note 6 Pro ?!
Click to expand...
Click to collapse
Maybe this video help you. Its based on 4pda info.
https://youtu.be/zADJwZ_jJ14
mouuztov said:
Maybe this video help you. Its based on 4pda info.
https://youtu.be/zADJwZ_jJ14
Click to expand...
Click to collapse
did not work buddy, any more ideas? =(
---------- Post added at 02:07 AM ---------- Previous post was at 01:32 AM ----------
mouuztov said:
Maybe this video help you. Its based on 4pda info.
https://youtu.be/zADJwZ_jJ14
Click to expand...
Click to collapse
I think I solved it, I passed persist.img by TWRP and it came back for now
mudkipxd said:
Hello everyone, I have a big problem here
Today finally finish my wait time to unlock the bootloader
I decided to do it and install the ROM by xiaomi.eu
When I completed the installation and had the cell phone ready I realized that the camera wasn't working :crying: :crying:
I tried everything, i flash the rom for fastboot and camera still don't working
Most likely, that is a hardware failure, but if so, what could I do to repair it?
Click to expand...
Click to collapse
I was able to correct the error by downloading the global fastboot rom, extracting it and copying the file persist.img, then giving flash in TWRP corrected the problem.
I have stock rom on my Oneplus 6. After the new OTA update 9.0.5 it downloads (aprrox 94 Mb) but installation failed. After 2 tries it says download full rom. then I rebooted my device, It stuck into fastboot mode. I called customer care they flashed the device remotely, now device is booted normally but all sensors are not working like proximity, autorotate etc. by dialing *#808# engineering menu tries to self-test & calibrate sensors but it shows only grey screen. Also sensor test & CPU-z app from play store also not showing any sensors.
dear members is it possible that flashing currupted my sensor files in system, could it possible to flash sensor file.
I tried to downgrade to 9.0.4 via update from local, says downgrade not possible. I tried Beta 16 update , problem still persist.
help me guys ASAP.
try to flash with msmdownloadtool, just search "op6 unbrick tool", if no success, try to flash via fastboot persist.img (pretty common issue with Xiaomi/OnePlus that comes to my repair shop) from working OP6. good luck.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3903272
---------- Post added at 08:13 PM ---------- Previous post was at 08:12 PM ----------
acmerw said:
try to flash with msmdownloadtool, just search "op6 unbrick tool", if no success, try to flash via fastboot persist.img from working OP6. good luck.
Click to expand...
Click to collapse
Hah. Great minds think alike Posted the same thing
please provide details/link for these procedures.
acmerw said:
try to flash with msmdownloadtool, just search "op6 unbrick tool", if no success, try to flash via fastboot persist.img (pretty common issue with Xiaomi/OnePlus that comes to my repair shop) from working OP6. good luck.
Click to expand...
Click to collapse
I am a noob, so I don't know how to do these procedures even if I download above mentioned file (msmsdownloadtool, persist.img) or my downloaded files are compatible with my oneplus 6. Could you give me links for further details.
Thanks
divvykev said:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3903272
---------- Post added at 08:13 PM ---------- Previous post was at 08:12 PM ----------
Hah. Great minds think alike Posted the same thing
Click to expand...
Click to collapse
Thats what I wanted, a detailed post esp having video showing all steps. I will try this & inform you soon.
All you seniors thanks for help.
not suceeded
playxda said:
Thats what I wanted, a detailed post esp having video showing all steps. I will try this & inform you soon.
All you seniors thanks for help.
Click to expand...
Click to collapse
I download the software & do all the steps, now my oneplus 6 is booted to os 9.0.2 but the sensors still not working. Do i need flash_persist.img. if yes, where do I get it for my device & how to use it.
detials needed
playxda said:
I am a noob, so I don't know how to do these procedures even if I download above mentioned file (msmsdownloadtool, persist.img) or my downloaded files are compatible with my oneplus 6. Could you give me links for further details.
Click to expand...
Click to collapse
where do I get fastboot persist.img & how to use it. as this is the next procedure after msmsdownload tool did not solve the problem.
playxda said:
where do I get fastboot persist.img & how to use it. as this is the next procedure after msmsdownload tool did not solve the problem.
Click to expand...
Click to collapse
I think you have a faulty phone now. Probably why you had a problem to start with. Msm takes you back to factory reset. Should work but if the problem is still there looks like its hardware. ?
Hello
Has anyone encountered this fingerprint reader problem?
I can't read the fingerprint!
Global Poco F2 Pro 6/128
ROM: lmi_eea_global_images_V12.0.3.0.QJKEUXM_20200923.0000.00_10.0_eea_e53e1f2537
Bootloader closed.
https://ibb.co/z6tymgq
I had great difficulty identifying the fingerprint and failed several times
Go to CIT , tap couple times on kernel to enter CIT test, in up right corner you have three dots, press on it to be able to enter advanced settings.
This is very important!!
You must enter advanced settings, and go to fingerprint options, you need black paper and white for test, when you finish it,you will get your fingerprint back.
Find my post, tou will see the same thread with this problem and how I solved it
---------- Post added at 11:47 AM ---------- Previous post was at 11:45 AM ----------
pilu01 said:
Hello
Has anyone encountered this fingerprint reader problem?
I can't read the fingerprint!
Global Poco F2 Pro 6/128
ROM: lmi_eea_global_images_V12.0.3.0.QJKEUXM_20200923.0000.00_10.0_eea_e53e1f2537
Bootloader closed.
https://ibb.co/z6tymgq
Click to expand...
Click to collapse
Just go to advanced settings ,find three dots in right up corner and do fingerprint sensor test with white and black paper or something similar to this
I ran the CIT program 15 times.
I got this result:
https://ibb.co/Wt50ySs
pilu01 said:
I ran the CIT program 15 times.
I got this result:
https://ibb.co/Wt50ySs
Click to expand...
Click to collapse
I can remember on what Stock ROM I was ,because I have the same problem, and I was changing ROM from Chinese to India ROM, so after I found out for these advanced settings that solve my problem. I have luck , I was delete persist.img in TWRP that cause this problem with fingerprint sensor
tze_vitamin said:
I can remember on what Stock ROM I was ,because I have the same problem, and I was changing ROM from Chinese to India ROM, so after I found out for these advanced settings that solve my problem. I have luck , I was delete persist.img in TWRP that cause this problem with fingerprint sensor
Click to expand...
Click to collapse
Thanks for the reply!
Do you describe exactly how to do it?
I'm an amateur.
I can start if you describe exactly how to get started.
First to the menu using * # * # 6484 # * # *, then 3 dots on the top right and tools
The choice is the 12th fingerprint calibration
At first, the calibration is against a light surface, but a mirror is recommended (usually you attach it to a fingerprint reader). Then the calibration is against a dark surface. After that restart the phone.
Daniel Kickboxer said:
First to the menu using * # * # 6484 # * # *, then 3 dots on the top right and tools
The choice is the 12th fingerprint calibration
At first, the calibration is against a light surface, but a mirror is recommended (usually you attach it to a fingerprint reader). Then the calibration is against a dark surface. After that restart the phone.
Click to expand...
Click to collapse
#4 comment
I got a mistake here too!
I only have a problem with my right thumb but it is a problem with my finger and not with the sensor since with any other finger I know it immediately (LOL)
The only problem for me is not that it doesn’t solve it.
The problem is that I can't scan the fingerprint!
I only have a pin, pattern, and password option.
pilu01 said:
The only problem for me is not that it doesn’t solve it.
The problem is that I can't scan the fingerprint!
I only have a pin, pattern, and password option.
Click to expand...
Click to collapse
which rom do you use?
Did you use magisk?,
NOSS8 said:
which rom do you use?
Did you use magisk?,
Click to expand...
Click to collapse
ROM: lmi_eea_global_images_V12.0.3.0.QJKEUXM
Bootloader closed.
No Magisk
But I also tried the EU.dev system.
Magisk turned on, but it didn't work.
pilu01 said:
ROM: lmi_eea_global_images_V12.0.3.0.QJKEUXM
Bootloader closed.
No Magisk
But I also tried the EU.dev system.
Magisk turned on, but it didn't work.
Click to expand...
Click to collapse
How did it happen?
NOSS8 said:
How did it happen?
Click to expand...
Click to collapse
I can't scan my fingerprint.
Video:
https://drive.google.com/file/d/1IVen4opAaHIXahgYgRQfKhajDNwOjUYE/view?usp=sharing
Error message:
Failed to capture fingerprint, please try again.
pilu01 said:
I can't scan my fingerprint.
Video:
https://drive.google.com/file/d/1IVen4opAaHIXahgYgRQfKhajDNwOjUYE/view?usp=sharing
Click to expand...
Click to collapse
I understood that you could not add your fingerprint but it was working before the update?
NOSS8 said:
I understood that you could not add your fingerprint but it was working before the update?
Click to expand...
Click to collapse
The phone is new, I tried it for the first time.
I tried several rom versions.
It was also a fastboot eu global rom, locked back.
pilu01 said:
The phone is new, I tried it for the first time.
I tried several rom versions.
It was also a fastboot eu global rom, locked back.
Click to expand...
Click to collapse
You could try this:
save to Xiaomi cloud(if necessary)
Disable localization (on xiaomi cloud)
Remove security on screen lock
Factory reset
NOSS8 said:
You could try this:
save to Xiaomi cloud(if necessary)
Disable localization (on xiaomi cloud)
Remove security on screen lock
Factory reset
Click to expand...
Click to collapse
Unfortunately, he didn't solve it.
I'll take you to the service.
I hope they can do it.
pilu01 said:
Unfortunately, he didn't solve it.
I'll take you to the service.
I hope they can do it.
Click to expand...
Click to collapse
You said you tried several rom so you unlocked the bootloader?
I find it strange that when you bought it it was already in V12.0.3.0.QJKEUXM.
Are you sure that this is not a K30 pro modify to F2 pro?
NOSS8 said:
You said you tried several rom so you unlocked the bootloader?
I find it strange that when you bought it it was already in V12.0.3.0.QJKEUXM.
Are you sure that this is not a K30 pro modify to F2 pro?
Click to expand...
Click to collapse
If I remember correctly the V12.0.2.0.QJKEUXM Rom was on it when I bought it.
Here I opened and then put the EU.dev Rom system on it.
I tried the fingerprint reader on this first, but it didn’t go.
After that I tried a lot, but the mem still doesn't work.
Xiaomi Poco F2 Pro M2004J11G