Hi,
We all felt problem of LAGGNESS and PERFORMANCE from our beast after flashing the custom ROMs. No way problems could not be solved although flashing official stock ROM through odin.
HERE HOW TO SOLVE THE PROBLEMS.
First of all you have to download Smart Switch( Official PC suite)
and then simple flash ROM through the suite. DONE af
Just download SMART SWITCH from http://www.samsung.com/in/support/smartswitch/ to your pc.
BOOT your phone to DOWNLOAD mode [power+volume down+home key while phone in switched off mode]
Go to smart switch and press EMERGENCY SOFTWARE RECOVERY AND ... & follow the instruction.
Done!!!!!
HOPE UR PROBLEM WILL BE SOLVED LIKE ME
------------------------------------------------------
I have not yet install any CUSTOM ROM. So don"t know about performance in Custom ROM. If u have tried pls report asap.
I recommend INSTALL RR 6.0 (Only big problem is networkstabilty, others are okay).
Video guide :
itsmedRb said:
hey
Just download SMART SWITCH from http://www.samsung.com/in/support/smartswitch/ to your pc.
BOOT your phone to DOWNLOAD mode.
Go to smart switch and press EMERGENCY SOFTWARE RECOVERY AND ... & follow the instruction.
Done!!!!!
HOPE UR PROBLEM WILL BE SOLVED LIKE ME
Click to expand...
Click to collapse
btw then I can flash roms like usual? and it wont bring back the same problem?
Hammad1029 said:
btw then I can flash roms like usual? and it wont bring back the same problem?
Click to expand...
Click to collapse
I have not checked. pls report if u find
itsmedRb said:
I have not checked. pls report if u find
Click to expand...
Click to collapse
when I open smart switch, it say's that the device isn't supported
---------- Post added at 02:27 PM ---------- Previous post was at 01:38 PM ----------
itsmedRb said:
I have not checked. pls report if u find
Click to expand...
Click to collapse
says unsupported only when i'm in the download mode and not when the os is booted
hammad1029 said:
when i open smart switch, it say's that the device isn't supported
---------- post added at 02:27 pm ---------- previous post was at 01:38 pm ----------
says unsupported only when i'm in the download mode and not when the os is booted
Click to expand...
Click to collapse
go to site menu bar and press device initial recovery and initialisation.
itsmedRb said:
go to site menu bar and press device initial recovery and initialisation.
Click to expand...
Click to collapse
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Hammad1029 said:
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Click to expand...
Click to collapse
MODEL NO SM-G360H
S/N NO- remove battery and see on the back panel
itsmedRb said:
MODEL NO SM-G360H
S/N NO- remove battery and see on the back panel
Click to expand...
Click to collapse
I did it and installed rr 6.0 and its smooth as ****(at least for now) and so you can add to the thread that roms work and the method works too
Can I use the tar.md5 file in this tool also?? Like Odin?
Doesn't work. If you have flashed ANY THING on your out-of-the-box firmware, it will give you lag whether you flash/format and reinstall STOCK rom. If you can feel the smoothness again, don't get too excited, the lag will come again within 15 days.
Once you flash there is no going back.
It just install the very first firmware of the phone. This won't make difference tho
---------- Post added at 04:04 AM ---------- Previous post was at 03:49 AM ----------
Since I can't post my feedback to hashtag new PAC ROM I wrote it here instead. So I just flash it in a clean way. From clearing system and all and back to stock install root kernel then twrp then flash the PAC ROM clean way. And after testing
And it takes I thing more than 30mins to flash the ROM. And after testing the ROM is extremely laggy and I found resurrection remix way smoother than the new PAC ROM
---------- Post added at 04:10 AM ---------- Previous post was at 04:04 AM ----------
@[email protected]
Anyway how to tag a user in a post or reply?
Sorry a new member here
---------- Post added at 04:29 AM ---------- Previous post was at 04:10 AM ----------
[email protected]
The lag is back! What do i do?!!!
Hammad1029 said:
The lag is back! What do i do?!!!
Click to expand...
Click to collapse
Wipe and flash, lol. Cp is ?
Bro it's crap
This only reflash the firmware. As soon as there are apps, the phone will get laggy. So don't be excited.
Placebo. There's no reason a why a wipe makes device lagfree except for the first few hours..
rms112 said:
Placebo. There's no reason a why a wipe makes device lagfree except for the first few hours..
Click to expand...
Click to collapse
True.
Will this work with Hashtags 7.1.2 rom?
Hammad1029 said:
on the emergency software recovery tab, it shows nothing. And the other device intialization tab, it says to enter the model number and the S/N number which I don't know what it is so what do I do?
Click to expand...
Click to collapse
Video guide added as well in Op. check
Video added in OP.
Please note phone will be faster as you new phone you have bought. (Later lag, that's blame SAMSUNG)
Hay.i have an idea. . . .i tryed it and it works for me, . .go try your self.but you will lost your data.so backup 1st.
1st step=>you nead stock rom,
2nd step=>go to stock recovery and do wipe and factry reset several time(3-5),
3rd and last step=>go to setings and do a factry reset from there,
After 3rd step you will feel the light of the rom like 1st day you buy it.!
Related
Hi...
I have been searching the net for about a week now and couldn't find CWM recovery for my SE Live WT19i. Maybe i am looking in the wrong places. phone runs on 2.3.4 with 4.0.2.A.0.62 (rooted). Also please name any good Roms for the phone...
Please help.
Thanks...
c4capricorn said:
Hi...
I have been searching the net for about a week now and couldn't find CWM recovery for my SE Live WT19i. Maybe i am looking in the wrong places. phone runs on 2.3.4 with 4.0.2.A.0.62 (rooted). Also please name any good Roms for the phone...
Please help.
Thanks...
Click to expand...
Click to collapse
take a look
link1
link2
link3
link4
you need an unlocked bootloader instructions above
use a laptop on battery when flashing to protect from bootloader errors
if something wrong when flashing bootloader your phone is bricked
you have to use service tools to solve this problem
(screen is black phone looks like dead)
install this:
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=en
rajmi said:
install this:
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler&hl=en
Click to expand...
Click to collapse
I installed it but says the phone is not supported...
get SE_Extreme_Tweak_Installer_1.8.... It works
---------- Post added at 04:20 PM ---------- Previous post was at 04:15 PM ----------
get SE_Extreme_Tweak_Installer_1.8.... It works
to enter into recovery mod, turn off ur phone and press volume down key multiple times while turning on
i was flashing a zip with flash gordon and suddenly all my apps closed and the phone doesnt turn on again, it stays always on samsung logo and only turn on in recovery mode. is it possible to fix it ? i thought that re-installing the OS would work but i dont know and i want to be sure.
If you can get to recovery/odin, you can fix it. Search in Google "galaxy Fame odin stock" and follow the android (dot) gs link. I can't post the link because I am a new member. Make sure your phone model matches the ROM you are downloading. DO NOT flash the incorrect ROM because the WILL hardware brick your device.
davexd97 said:
i was flashing a zip with flash gordon and suddenly all my apps closed and the phone doesnt turn on again, it stays always on samsung logo and only turn on in recovery mode. is it possible to fix it ? i thought that re-installing the OS would work but i dont know and i want to be sure.
Click to expand...
Click to collapse
If you can get to recovery, have you tried factory reset from recovery?. in most cases that solves the bootloop, only problem though you will lose all your users apps.
Try samfirmware dot com
Sent from my GT-I9295 using xda app-developers app
nafayi said:
If you can get to recovery, have you tried factory reset from recovery?. in most cases that solves the bootloop, only problem though you will lose all your users apps.
Click to expand...
Click to collapse
i tried factory reset from recovery but it didn't worked, i also tried to wipe cache and data but it did not worked. I re-installed the firmware with kies and it worked , the bad is that i lost everything on my phone. Thanks to everyone
davexd97 said:
i tried factory reset from recovery but it didn't worked, i also tried to wipe cache and data but it did not worked. I re-installed the firmware with kies and it worked , the bad is that i lost everything on my phone. Thanks to everyone
Click to expand...
Click to collapse
but did you do it? my galaxy fame stocks on galaxy logo.. please help me.
drickel said:
but did you do it? my galaxy fame stocks on galaxy logo.. please help me.
Click to expand...
Click to collapse
yes i didi it! I opened samsung kies , went to tools -> update firmware (i dont know if it says update firmware in the english version because i dont have it) , then you enter your model wich should be
under your battery and then it will ask for your S/N wich is under the battery too. then just follow the instructions ! you can pm me if you need help
davexd97 said:
i was flashing a zip with flash gordon and suddenly all my apps closed and the phone doesnt turn on again, it stays always on samsung logo and only turn on in recovery mode. is it possible to fix it ? i thought that re-installing the OS would work but i dont know and i want to be sure.
Click to expand...
Click to collapse
flash dis file using odin...it will solve your problem
http://forum.xda-developers.com/showthread.php?p=46535510#post46535510
dont frget to press the thanks button
siva aggzz said:
flash dis file using odin...it will solve your problem
http://forum.xda-developers.com/showthread.php?p=46535510#post46535510
dont frget to press the thanks button
Click to expand...
Click to collapse
i already solved my problem , thanks anyway
I have same problem
davexd97 said:
yes i didi it! I opened samsung kies , went to tools -> update firmware (i dont know if it says update firmware in the english version because i dont have it) , then you enter your model wich should be
under your battery and then it will ask for your S/N wich is under the battery too. then just follow the instructions ! you can pm me if you need help
Click to expand...
Click to collapse
I have same problem. but when i open kies>upgrade firmware and write the model number GT-S6810P a window open saying check and enter model no and then it closes. please tell me what model no i have to write. Thanks in advance.
---------- Post added at 02:32 PM ---------- Previous post was at 01:39 PM ----------
I need galaxy fame s6810p pit file. Please post a link.
Thanks in advance
Refer to Fame forum - http://forum.xda-developers.com/galaxy-fame?nocache=1&z=3804938507161632. It will give more help than other users.
links broken
siva aggzz said:
flash dis file using odin...it will solve your problem
http://forum.xda-developers.com/showthread.php?p=46535510#post46535510
dont frget to press the thanks button
Click to expand...
Click to collapse
link is broken......please update
Thanks
hannan rana said:
I have same problem. but when i open kies>upgrade firmware and write the model number GT-S6810P a window open saying check and enter model no and then it closes. please tell me what model no i have to write. Thanks in advance.
---------- Post added at 02:32 PM ---------- Previous post was at 01:39 PM ----------
I need galaxy fame s6810p pit file. Please post a link.
Thanks in advance
Click to expand...
Click to collapse
Remove the battery and the model is writen in a paper under the battery , it will ask for another number that is writen there too
davexd97 said:
Remove the battery and the model is writen in a paper under the battery , it will ask for another number that is writen there too
Click to expand...
Click to collapse
where to use these numbers???
hannan rana said:
where to use these numbers???
Click to expand...
Click to collapse
Read my post again and you will see when you will use them
I'd appreciate any help to get my phone working again. I've only had it for a couple of weeks and I'm hoping I haven't completely ruined it...
I'll try to recall the exact steps I took to get to this point:
First, towelroot wouldn't work to get root due to me accepting the OTA update to 4.4.4 android. So I found on a forum post that you can use Odin to flash the stock kernel and then towelroot will work. So I downloaded the stock kernel and flashed it successfully using Odin. Towelroot was then able to work with success. After that I installed SuperSU and busybox. Then I was using this guide (URL omitted due to forum rules) to install SafeStrap recovery as I'd read CWM recovery didn't work for the G900A model (AT&T). Safestrap seemed to install OK and when I rebooted I was able to get into the SafeStrap software interface. From there, I attempted to flash the CM12 nightly build to the "stock rom" slot (I'd read there was some trouble using the non-stock-rom slots in SafeStrap). That operation completed with success, but when I tried to reboot, it froze at the CM12 splash screen. I tried this with a few more custom ROMS and they all do the same thing (freeze up on boot logo / splash screen).
I've tried using Odin to flash back the stock firmware. As long as I didn't try to flash the bootloader (BL) Odin shows "PASS". However, when it reboots it again hangs on the Samsung splash screen.
So at this point, I've flashed all stock firmware to the phone (except BL) and it freezes and then goes black screen on the Samsung splash screen. Also, it no longer shows the SafeStrap "recovery / continue" bootup screen since I flashed the stock firmware.
Any ideas on how I can get back to a useable device?...
fix
use odin to fix this error will fix your phone
http://odindownload.com/
then follow these directions
Warning! Please find the right Tutorial before you starting the flashing
Do not forget to Backup your phone.
Download the correct and latest Odin versions
Install the Latest Samsung USB Driver
Download and confirm Custom ROM with your device.
Keep in mind that , Most of Samsung phones are different and each one requires various procedures to rooting & flashing with custom ROMs
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
I will get the link for the att s5 original rom
---------- Post added at 01:12 PM ---------- Previous post was at 01:01 PM ----------
http://galaxys5root.com/galaxy-s5-stock-firmware/
Deltax82 said:
use odin to fix this error will fix your phone
http://odindownload.com/
then follow these directions
Warning! Please find the right Tutorial before you starting the flashing
Do not forget to Backup your phone.
Download the correct and latest Odin versions
Install the Latest Samsung USB Driver
Download and confirm Custom ROM with your device.
Keep in mind that , Most of Samsung phones are different and each one requires various procedures to rooting & flashing with custom ROMs
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
I will get the link for the att s5 original rom
---------- Post added at 01:12 PM ---------- Previous post was at 01:01 PM ----------
http://galaxys5root.com/galaxy-s5-stock-firmware/
Click to expand...
Click to collapse
@thebeav , @ up
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Connect your phone in "DOWNLOAD" mode (Power off and then press "Vol down + home + power" at the same time)
Open "ODIN" and select the downloaded firmware as "AP"
Press start (Progress will take about 10 minutes)
Phone will be fine again
LS.xD said:
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Click to expand...
Click to collapse
I downloaded from odin.com that and fixed my brothers note 4 and all three of my virus and malware detecters didn't go off
Deltax82 said:
I downloaded from that and fixed my brothers note 4 and all three of my virus and malware detecters didn't go off
Click to expand...
Click to collapse
Go for some working AV.
Avast internet security rings alarm.
And the installer itself looks quite suspicious lol
LS.xD said:
@thebeav , @ up
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Connect your phone in "DOWNLOAD" mode (Power off and then press "Vol down + home + power" at the same time)
Open "ODIN" and select the downloaded firmware as "AP"
Press start (Progress will take about 10 minutes)
Phone will be fine again
Click to expand...
Click to collapse
link checker said your link was harmful virus maybe attached do not use this link
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
LS.xD said:
Go for some working AV.
Avast internet security rings alarm.
And the installer itself looks quite suspicious lol
Click to expand...
Click to collapse
that's the original odin installer website posted here on XDA by the main people that made this site do your research please
Deltax82 said:
link checker said your link was harmful virus maybe attached do not use this link
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
that's the original odin installer website posted here on XDA by the main people that made this site do your research please
Click to expand...
Click to collapse
PLease get me link to the post you're talking about.
odin
Hi
Well there are many places to get it. I often go here:
http://androidcentral.us/2013/11/download-odin/
Regards
Administration
xda-developers.com
Deltax82 said:
Hi
Well there are many places to get it. I often go here:
http://androidcentral.us/2013/11/download-odin/
Regards
Administration
xda-developers.com
Click to expand...
Click to collapse
Pretty good, but its a completely different website as you posted before. Its not related to "http://odindownload.com" in any kind.
BTW, you're funny, sending me a PM and i can't answer you as you disabled receiving PMs. OMG
LS.xD said:
Pretty good, but its a completely different website as you posted before. Its not related to "http://odindownload.com" in any kind.
BTW, you're funny, sending me a PM and i can't answer you as you disabled receiving PMs. OMG
Click to expand...
Click to collapse
its the same program dude go to both and you will see wow im done with this conversation
Deltax82 said:
its the same program dude go to both and you will see wow im done with this conversation
Click to expand...
Click to collapse
Don't be mad. Its all about learning and you have great potential doing so...
When I tryto flash the PDA file I downloaded from @lsxD 's link with Odin I get the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
thebeav said:
When I tryto flash the PDA file I downloaded from @lsxD 's link with Odin I get the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
Click to expand...
Click to collapse
Googled the error. Solution is to flash the firmware with PIT file. Only problem is that someone has to give you a working pit file.
MATCHING THREAD
Same problem with other Samsung phone and description for the solution --> CLICK ME
I'm still stuck... I'm just looking to get back to a usable device. I really don't care if it's a stock or custom rom at this point. Any help is appreciated.
I tried flashing with the full firmware package I downloaded (4.4.2 G900A stock firmware) which included a *.pit file inside one of the tarballs. I used the PIT/re-partition option and everything succeeded except it still freezes at the Samsung boot logo.
Anyone? I'm getting desperate here...
thebeav said:
Anyone? I'm getting desperate here...
Click to expand...
Click to collapse
Looking not taht good. I tried my best with no success May be at this point or in some days in case no one here is able to help you, you could think about checking ebay for "bootloader repair" should be about 40$
Hello guys!
Just I've flashed the XEF 6.0.1 firmware but now when I try to see my IMEI with *#06# I get UNKONWN APPLICATION. In Settings Menu/About/ I can see the IMEI but he cannot be displayed by *#06#.
I've tried to go back to stock firmware with SmartSwitch Recovery but I get the same problem.
Any solutions?
Thank you!
If you don't gave the efs files backed up... mmm... samsung service center is the only solution I think
Replied through TapaTalk from SM-G920I
well dude G920F is piece of junk i didnt know that until i buy it and i have same problem i accepted updates and i got no service its piece of junk i think am going to go with sony or motorola for now on i will never buy this Samsung
Samsung service is the only way? Hmmm...I got the Knox Tripped so...It's not a good idea Samsung service
try going back to 5.1.1 and see
tazaga said:
try going back to 5.1.1 and see
Click to expand...
Click to collapse
Tried and same thing.
Third party service centre ... Russian/indian/pakistani/ guy who own z3x is yours solution
you can fix it
with octoplus box oe z3x just find some one who repairs imei and askhim if he got octoplus box or z3x make sure he knows what he doing because most of those Indians are retarded (no offense to Indians )
the bad things you get is
50% you cant get ota updates
different imei
different serial number
time to time signal drops and disconnected during calls :'(
you have 50% chance you cant get stock with smart switch if you try updates
you have 50% stuck bootloop after flashing stock with odin
the good things is there is a good thing its just try to sell it to another guy dont tell him whats wrong LOL
basicaly its like...dude its a junk and i have one i hate it am thinking selling it with 400bucks and move on to Motorola droid turbo 2(no worry about dropping in on the ground) or nexus 6p
tazaga said:
you can fix it
with octoplus box oe z3x just find some one who repairs imei and askhim if he got octoplus box or z3x make sure he knows what he doing because most of this Indians are retarded
the bad things you get is
50% you cant get ota updates
different imei
different serial number
time to time signal drops and disconnected during calls :'(
you have 50% chance you cant get stock with smart switch if you try updates
you have 50% stuck bootloop after flashing stock with odin
the good things is there is a good thing its just try to sell it to another guy dont tell him whats wrong LOL
basicaly its like...dude its a junk and i have one i hate it am thinking selling it with 400bucks and move on to Motorola droid turbo 2(no worry about dropping in on the ground) or nexus 6p
Click to expand...
Click to collapse
This bad things will be after I try to recover IMEI with octoplus? Because now the phone is working well, only bad thing is I cannot see IMEI with *#06# only I can see it in Settings/ Imei Info.
Yeah it's after fixing it but wait don't rush just wait maybe some one can help
---------- Post added at 04:21 PM ---------- Previous post was at 04:19 PM ----------
For now install twrp recovery and make easy radio backup or full back up and save it to your pc just in case things goes down
---------- Post added at 04:24 PM ---------- Previous post was at 04:21 PM ----------
alexxutzu said:
This bad things will be after I try to recover IMEI with octoplus? Because now the phone is working well, only bad thing is I cannot see IMEI with *#06# only I can see it in Settings/ Imei Info.
Click to expand...
Click to collapse
Can you make calls ?
tazaga said:
Yeah it's after fixing it but wait don't rush just wait maybe some one can help
---------- Post added at 04:21 PM ---------- Previous post was at 04:19 PM ----------
For now install twrp recovery and make easy radio backup or full back up and save it to your pc just in case things goes down
---------- Post added at 04:24 PM ---------- Previous post was at 04:21 PM ----------
Can you make calls ?
Click to expand...
Click to collapse
Yes I can call, everything work perfect
alexxutzu said:
Yes I can call, everything work perfect
Click to expand...
Click to collapse
OK hold on don't do nothing as long as you can make calls go and make efs radio backup with twrp recovery and wait for updates my be it's a bug...just keep your phone as it is ! But make twrp backup fast...or use titanuim backup
tazaga said:
OK hold on don't do nothing as long as you can make calls go and make efs radio backup with twrp recovery and wait for updates my be it's a bug...just keep your phone as it is ! But make twrp backup fast...or use titanuim backup
Click to expand...
Click to collapse
Ok I will try this. Thank you.
tazaga said:
OK hold on don't do nothing as long as you can make calls go and make efs radio backup with twrp recovery and wait for updates my be it's a bug...just keep your phone as it is ! But make twrp backup fast...or use titanuim backup
Click to expand...
Click to collapse
For installing TWRP I should flash also the 5.1.1 bootloader or I can flash it directly on 6.0.1?
In Samsung INFO app from Playstore can I see IMEI but in the CSC ORIGINAL box is nothing, is empty. How to make show the Original CSC?
I've finished the problem! I made a Factory Reset from Settings and everything is ok now!
Thank you!
alexxutzu said:
For installing TWRP I should flash also the 5.1.1 bootloader or I can flash it directly on 6.0.1?
In Samsung INFO app from Playstore can I see IMEI but in the CSC ORIGINAL box is nothing, is empty. How to make show the Original CSC?
Click to expand...
Click to collapse
i have flashed odin twrp PL and and oldsboot BL
but if you did this you may need to flash stock 6.01 again because ( newsboot created for beta ) wont work with new 6.0.1
so mbe you wanna go 5.1.1 to make backup i recommanded to make backup before lost it for ever
---------- Post added at 07:49 PM ---------- Previous post was at 07:47 PM ----------
alexxutzu said:
I've finished the problem! I made a Factory Reset from Settings and everything is ok now!
Thank you!
Click to expand...
Click to collapse
imei showed ?
tazaga said:
i have flashed odin twrp PL and and oldsboot BL
but if you did this you may need to flash stock 6.01 again because ( newsboot created for beta ) wont work with new 6.0.1
so mbe you wanna go 5.1.1 to make backup i recommanded to make backup before lost it for ever
---------- Post added at 07:49 PM ---------- Previous post was at 07:47 PM ----------
imei showed ?
Click to expand...
Click to collapse
Yep, Imei showed
Nice dude try to make backup efs radio or full backup ASAP ! Its important that way you dont wory because this g920f is doing strange things ! I know a lot lost imei because of updates ota or smartswitch or odin....and once you give it to some indian to fix it its will never be the same !
tazaga said:
well dude G920F is piece of junk i didnt know that until i buy it and i have same problem i accepted updates and i got no service its piece of junk i think am going to go with sony or motorola for now on i will never buy this Samsung
Click to expand...
Click to collapse
stfu n get out from this forum.
---------- Post added at 08:53 PM ---------- Previous post was at 08:03 PM ----------
Just do a factory reset from settings menu (factory reset from recovery wont help to fix this issue) and thats it you'll find ur imei on dialing *#06#.. its just a small buy...6.0.1 update is more stable than 5.1.1 and its ready to go.
samsung switch emergency recovery
alexxutzu said:
Hello guys!
Just I've flashed the XEF 6.0.1 firmware but now when I try to see my IMEI with *#06# I get UNKONWN APPLICATION. In Settings Menu/About/ I can see the IMEI but he cannot be displayed by *#06#.
I've tried to go back to stock firmware with SmartSwitch Recovery but I get the same problem.
Any solutions?
Thank you!
Click to expand...
Click to collapse
Try in the options menu of samsung switch and you should find an option with emergency recovery, insert the model number and the s/n wait a bit to reset up everything and try to flash again.. worked with me once so let me know if helped you too
can anybody making CWM or TWRP for my device model j105f with chipset spreadtrum sc 8830, please
fahmi02 said:
can anybody making CWM or TWRP for my device model j105f with chipset spreadtrum sc 8830, please
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0B8CU0yryMov_QUtTR2ppSG1ZWG8
Sent from my SM-J105F using XDA-Developers mobile app
Please to root j105f
Sent from my SM-J105F using XDA Free mobile app
Hi, i have a galaxy j1 mini sm-j105B . I tried to flash this custom recovery i found on the internet, intended for the sm-j105H , and it worked fine to use it to flash SUperSU on it. But the TWRP i believe its not working 100%. The partition layout is different from H to B model. I dont know how it will work on your F model, but as i said, it worked on mine to use it to push SUperSU inside, root works fine. Want to try ? i can provide the links, but no guarantee it will work for your F as it worked for my B. Cheers
RE:
Piridroid said:
Hi, i have a galaxy j1 mini sm-j105B . I tried to flash this custom recovery i found on the internet, intended for the sm-j105H , and it worked fine to use it to flash SUperSU on it. But the TWRP i believe its not working 100%. The partition layout is different from H to B model. I dont know how it will work on your F model, but as i said, it worked on mine to use it to push SUperSU inside, root works fine. Want to try ? i can provide the links, but no guarantee it will work for your F as it worked for my B. Cheers
Click to expand...
Click to collapse
can you email me the recovery that you used to I want to try it on my SM-J105F
Sipho K. said:
can you email me the recovery that you used to [email protected] I want to try it on my SM-J105F
Click to expand...
Click to collapse
I will try to port this TWRP for the J105F . Please let me know what firmware version you have on your phone, dial to *#1234# and let me know whats your AP , CP , CSC and model. Also which country .
Telstra just gave me a J1Mini free for my Note7 Exploding model. They dont want it back when I get my non exploding N7 replacement.
I have a SM-J105Y is this Recovery ok for that phone.
AP:J105YDVU0APF2
CP:J105YDVU0APG1
CSC:J105YTLP0APF2
Piridroid said:
I will try to port this TWRP for the J105F . Please let me know what firmware version you have on your phone, dial to *#1234# and let me know whats your AP , CP , CSC and model. Also which country .
Click to expand...
Click to collapse
AP: J105FXXU0PAC5
CP: J105FXXU0PAC9
CSC: J105FOJV0APC3
Model: SM-J105F
Country: South Africa
As for the country, I don't mind using any ROM, even the one from Asia as long as I can change the language to English and get hold of the custom recovery.
allright guys i will post it when im back from grocery lol laters
Lol I have a feeling I am gonna being seeing "recovery not seandroid enforcing soon" ?
Sipho K. said:
Lol I have a feeling I am gonna being seeing "recovery not seandroid enforcing soon" ?
Click to expand...
Click to collapse
is that a good thing or a bad thing ? rofl
Piridroid said:
allright guys i will post it when im back from grocery lol laters
Click to expand...
Click to collapse
Piridroid said:
is that a good thing or a bad thing ? rofl
Click to expand...
Click to collapse
It's not a bad thing since I have the original stock recovery. I just flash it again and try another custom recovery with the hope that one will eventually work
Sipho K. said:
Lol I have a feeling I am gonna being seeing "recovery not seandroid enforcing soon" ?
Click to expand...
Click to collapse
Just to clarify, the twrp i will provide does show that message before it boots. But that does not make my device bootloop like i read somewhere, nor it stops it from installing supersu correctly. It seems to work just fine. Anyway, if you dont want to see that message simply flash the stock recovery.img (easy downloadable) via Odin compressed as .tar . It replaces the recovery without changing the root status. While in download mode, your phone status will still be "custom", but no more seandroid messages will be displayed and the root works just fine.
I have seen and fixed that "recovery not seandroid enforcing" and it doesn't make me panic anymore. As for the custom part, my phone has been like that since I used a custom bootloader to achieve root via ChimeraTool then SuperSU failed to update binaries and I am stuck using 360root:crying:
Sipho K. said:
I have seen and fixed that "recovery not seandroid enforcing" and it doesn't make me panic anymore. As for the custom part, my phone has been like that since I used a custom bootloader to achieve root via ChimeraTool then SuperSU failed to update binaries and I am stuck using 360root:crying:
Click to expand...
Click to collapse
Ok here we go, give this a shot:
------------------------------------------
Developer options -> Enable OEM Unlock + USB Debug.
Flash with Odin.
In case it does not work, let me know.
Mine have the "recovery not seandroid..." but it works just fine. Also in case it does boot ok into twrp, press the touch button right above the home button and check if there is any stuff written there in RED. report to me please in case it does. Press the same mid touch button to go back to the main menu.
You can a video i uploaded here for my j105B, as reference:
https://www.youtube.com/watch?v=WRO...omment_id=z12qvduormr0flohm04ci3dwvlrjejlwddg
feel free to ask anything dude cya
---------- Post added at 09:25 PM ---------- Previous post was at 09:19 PM ----------
Sipho K. said:
I have seen and fixed that "recovery not seandroid enforcing" and it doesn't make me panic anymore. As for the custom part, my phone has been like that since I used a custom bootloader to achieve root via ChimeraTool then SuperSU failed to update binaries and I am stuck using 360root:crying:
Click to expand...
Click to collapse
1 out of 10 people had an issue where Odin would "PASS" the twrp flash, but the stock recovery would remain. We managed to fix this but then you would need extra files.
---------- Post added at 10:20 PM ---------- Previous post was at 09:25 PM ----------
Sipho K. said:
I have seen and fixed that "recovery not seandroid enforcing" and it doesn't make me panic anymore. As for the custom part, my phone has been like that since I used a custom bootloader to achieve root via ChimeraTool then SuperSU failed to update binaries and I am stuck using 360root:crying:
Click to expand...
Click to collapse
Oh and please leave some feedback in case it does work, its important so i know what i am doing lol... im still learning how to port.
Piridroid said:
Ok here we go, give this a shot:
https://www.dropbox.com/s/z9dulj98wxky9s2/SM-J105F_TWRP_2.8.5.0_T1.tar?dl=0
Developer options -> Enable OEM Unlock + USB Debug.
Flash with Odin.
In case it does not work, let me know.
Mine have the "recovery not seandroid..." but it works just fine. Also in case it does boot ok into twrp, press the touch button right above the home button and check if there is any stuff written there in RED. report to me please in case it does. Press the same mid touch button to go back to the main menu.
You can a video i uploaded here for my j105B, as reference:
https://www.youtube.com/watch?v=WRO...omment_id=z12qvduormr0flohm04ci3dwvlrjejlwddg
feel free to ask anything dude cya
---------- Post added at 09:25 PM ---------- Previous post was at 09:19 PM ----------
1 out of 10 people had an issue where Odin would "PASS" the twrp flash, but the stock recovery would remain. We managed to fix this but then you would need extra files.
---------- Post added at 10:20 PM ---------- Previous post was at 09:25 PM ----------
Oh and please leave some feedback in case it does work, its important so i know what i am doing lol... im still learning how to port.
Click to expand...
Click to collapse
I will download try it as soon as dropbox decides to come back online then leave feedback
"This site can’t be reached
www.dropbox.com’s DNS address could not be found."
Removed
Piridroid said:
mm ok try this link
https://drive.google.com/file/d/0B7c3NeHk33JCQ0xtVF9SNDVoN1U/view?usp=sharing
or
http://bit.ly/2cQbxOk
---------- Post added at 12:16 PM ---------- Previous post was at 12:04 PM ----------
If this does not work for the Y version, it should be close anyway. Give me some time and i will check if it should be compatible for you, or if needs changes
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
File is ready for download, where are you?
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
Have a file ready for you to try, check the posts here
Click to expand...
Click to collapse
TWRP is working fine on 105Y Thanks
Piridroid said:
mm ok try this link
https://drive.google.com/file/d/0B7c3NeHk33JCQ0xtVF9SNDVoN1U/view?usp=sharing
or
http://bit.ly/2cQbxOk
---------- Post added at 12:16 PM ---------- Previous post was at 12:04 PM ----------
If this does not work for the Y version, it should be close anyway. Give me some time and i will check if it should be compatible for you, or if needs changes
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
File is ready for download, where are you?
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
Have a file ready for you to try, check the posts here
Click to expand...
Click to collapse
Thanks so much, got rid of that Chinese root and SuperSU updated binaries.
I did get that "RECOVERY NOT SEANDROID ENFORCING" which I got past by tapping on the "powered by android" logo, from there it was smooth sailing...... thanks so much dude
wornbat said:
TWRP is working fine on 105Y Thanks
Click to expand...
Click to collapse
You downloaded the version for the H not Y! but aparently tey are compatible just like the B.
The only one that aparently had a different kernel is the M version.
Anyway wornbat, gald it worked! enjoy
---------- Post added at 06:20 PM ---------- Previous post was at 06:18 PM ----------
Sipho K. said:
Thanks so much, got rid of that Chinese root and SuperSU updated binaries.
I did get that "RECOVERY NOT SEANDROID ENFORCING" which I got past by tapping on the "powered by android" logo, from there it was smooth sailing...... thanks so much dude
Click to expand...
Click to collapse
Thanks for the feedback dude, if you have any trouble with the TWRP please share with us since im not professional! Another thing, when inside TWRP if you hitthe touch button that is above the home button in the middle, it shows a "status" page. If there are RED warnings displayed there, please let me know! Cheers