Factory MCU & Android rom - MTCD Android Head Units Q&A

hello,
iv'e had a KANOR (seicane) PX5 7" universal HU 4gb ram and 32Gb space
i updated MCU from MTCE_GS_V2.76b_3
to
MTCE_GSV3.44_3
than i lost my rgb lights when turning on the dashboard & headlight lights
i can only leave it on all time or off all time
after than i upgraded from android 8.0 to android 9.0 GS7_PX5_9.0_ota(20200512)
and now my head unit goes really slow and lagging
any way to fix it?
i tried android 10 and it was worst
please H-E-L-P

Related

screen blank but responsive on AUTORADIO DVD/GPS/NAVI/IPOD/ANDROID 4.2 Player FORD MO

Welcome everyone,
around half year ago I have purchased AUTORADIO DVD/GPS/NAVI/IPOD/ANDROID 4.2 Player FORD MONDEO I was pretty much happy using this gear, however now it start having some issues with screen.
Basically screen whole unit remains operations except screen what is blank but still responsive. Radio should start when ignition turned on and car is powered. unit however does not display logo screen but instead starting last function running much quicker than before. I have noticed that all function like playing cd/dvd or using radio working well. it does also WiFi dongle and 3g dongle. The best part is that panel is still responsive and you can change stations on radio when pressing place where button should be displayed.
link for youtube video goo.gl/n3qQUT
Could you share maybe some ideas what could be
Cheers!

Blacklight problem

Hi guys, I have a problem with my eonon unit Ga8161 7.1, (px3 mtce KLD). When I set the brightness below 50%, the back lighting starts sobbing, as if there were a blinking LED flashing. I contacted the assistance asking me to update, I updated rom, mcu, installed rom halk and malaysk but the problem remains. So they sent me a new MB (not Android px3, but the MB where you install the MCU) is the problem is left. They sent me a new display and the problem remained. If you set the brightness to around 50% up, the problem disappears. What is the electronic card presented behind the display ??

Always on display after Android 10 update.

Hi guys, just checking if is it a bug where always on display did not turn off in a completely dark room after 5 minutes on the new Android 10 update? Is there any fix? Works fine on pie.

Battery drain after Android head unit installation | PX5 | 4GB | 64GB | MCTE_MX2

Hello All,
I recently installed a new Android Head Unit on my Peugeot 407 (PX5 | 4GB | 64GB | MTCE_MX2). Detailed specs below.
Ever since the installation of Head Unit, my battery has been going flat. I tried trickle charging my battery few times but it keeps going flat in few days / weeks that I have to jump start my car too often.
Is there a way to power off my Android Head Unit everytime I turn off my engine? Currently it goes to sleep when I turn off engine and I'm wondering that might be a contributing factor for the drain.
I can't find the power settings under "Car Settings --> Factory settings" menu. Please advise.
My head unit specifications below.
Car: Peugeot 407
Unit: PX5
OS: Android 10
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
Thank you!
Hey All, I've been experimenting with few settings over the last few weeks and at this point I think I've found the right settings that turns off your head unit everytime you turn off your engine.
I don't have the exact steps with me right now. But I will be back soon with more details.
Stay tuned!
livewyr said:
Hey All, I've been experimenting with few settings over the last few weeks and at this point I think I've found the right settings that turns off your head unit everytime you turn off your engine.
I don't have the exact steps with me right now. But I will be back soon with more details.
Stay tuned!
Click to expand...
Click to collapse
There is a problem with your head unit/wiring/car/battery.
A properly installed head unit cannot deplete the battery in sleep mode.
Perhaps consult a skilled installer or auto electrician in your area and also have your battery tested.
This had been written about many many times.
marchnz said:
There is a problem with your head unit/wiring/car/battery.
A properly installed head unit cannot deplete the battery in sleep mode.
Perhaps consult a skilled installer or auto electrician in your area and also have your battery tested.
This had been written about many many times.
Click to expand...
Click to collapse
Thank you. Yes, I suspect there are larger problems. But just in a difficult spot stuck in lockdowns right now. Without a lots of access to the services / skills needed. So needed a shortcut / quick solution as described in the question. Good news is I found the settings and it worked.
Meanwhile, If you have links to the previous discussion you were referring to, please add the links below when you can.
livewyr said:
Hey All, I've been experimenting with few settings over the last few weeks and at this point I think I've found the right settings that turns off your head unit everytime you turn off your engine.
I don't have the exact steps with me right now. But I will be back soon with more details.
Stay tuned!
Click to expand...
Click to collapse
So, there are 2 settings I changed for this to work.
In your Android 10 Head Unit,
Goto Settings -> CAR -> Factory Settings -> Enter Password -> Other and set "Default Power Status" to "Off"
Goto Settings -> CAR -> Extra Settings and set "Shutdown Delay when ACC OFF" : Desired time in seconds / minutes.
In my case I'm rolling with 30 seconds right now, as I don't take the car out often these days. Post lockdown if you are driving around a lot, you might wanna set this to a reasonable time in minutes.
Thanks All! Hope this helps!

my mtcd_GS_V1.16_1 don´t work

When we turn on our car radio - we see lollipop multimedia system - then android - then a black system window - no matter what I press, no app works, only volume adjustment. When I press the "DISK" button, the device resets. Is the firmware damaged - can I import it again - can you help?
version info:
MCU: MTCD_GS_V1.61_1 May 31 2016 20:45:05
Android 5.1.1
Kernel 3.0.101+ [email protected] #86
Build: RK3188
Consider replacing SOM with PX6....or better replace the unit with an FYT based 7862UIS

Categories

Resources