I don't know what I was doing although I know but my brand new OnePlus 6 avenger edition got softbrick or hardbrick I don't know
All I know is my phone is now stucked on bootloader it loops it into again and again
And for god sakes someone told me that if I lock my bootloader back then I can revive my phone but it made it worst
Now the only way to revive my phone is through msm hardbrick tool I think so
But here's a problem I installed Qualcomm driver and turned my laptop (windows 7) into testing mode
Now I tried to unbrick it through msm tool it shows that the device is connected then it shows start download firehose binary but it shows failed after 16s of starting the process it shows something about saraha communications failed
How can I revive my phone
Please help me !!!!!
Got solved!!!
Hi there, I have the same problem. May I know how did you solve it?
here is my problem i have a redmi note 10 pro with the bootloader unlocked.
I was recently in twrp so I format all data format then flash a bad rom by mistake after this im reboot in recovery I think but the screen of my phone is completely black yet the computer detects the port Qualcomm 9008 is all the more frustrating because it never happens but when I try to boot a fastboot the pc does not recognize that my phone is a fastboot mode or recovery mode adb dosen't work so Is impossible to flash the stock rom of redmi note 10 pro could you help me?
Take it to authorized service center and let them try to fix it.
that's what I said to myself good I think there is only that to do
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
emybuse said:
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
Click to expand...
Click to collapse
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
mdurkin said:
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
Click to expand...
Click to collapse
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
emybuse said:
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
Click to expand...
Click to collapse
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Amatöhr said:
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Click to expand...
Click to collapse
Fail : not unlock, help me
I didn't think I had to, when I plug in the tablet it pops up with the name and everything.
Hi, I have the same issue with a Tab 11 pro gen 2. Could you let me know how to solve it? I can't even find the recovery, and tried all button combinations. I can only go to fastboot or meta modes.
im literally stuck on this ( fastboot ) screen... it boots straight to this screen. If i plug the device into my pc it says device not recognised and none of the drivers seem to work. I have tried everything to shut it down so i can try flash via EDL, but the power button just takes me back to fastboot again...
I'm having the same reboot issue 1 minute or less after fully booting. I have no idea how to fix it
my OnePlus 8 went to crashdumpmode on 26 dec after the 11.0.4.4 update while using the phone suddenly it got stuck and booted into crashdumpmode i tried to restart phone but its not working then u went to service centre and they said this a hardware issue and i need to change the motherboard and it will cost 27k. I came back and tried edl mode flashing throug msm tool fule flashed but device isn't booting stuck on OnePlus logo please help me attached images for better details thanks in advance
MSM should be able to restore your phone to a working state.. is it possible that you're using the wrong MSM tool/flashing the wrong images? I'd double check that and try reflashing.
duzzqqqq said:
MSM should be able to restore your phone to a working state.. is it possible that you're using the wrong MSM tool/flashing the wrong images? I'd double check that and try reflashing.
Click to expand...
Click to collapse
I have uploaded all the file picture below tried these all will you check and confirm is it wrong or right
duzzqqqq said:
MSM should be able to restore your phone to a working state.. is it possible that you're using the wrong MSM tool/flashing the wrong images? I'd double check that and try reflashing.
Click to expand...
Click to collapse
I have OnePlus 8 indian variant 8/128 can you please share the right msm tool
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Did you get yours off of this thread ?
Yes Indian variant tried almost all files nothing worked
Need some help from master... I brick my phone after adb sideload to install pixel experience. Now it stuck in edl mode. Last stock rom already flash to latest Android 12 retcn.
zackkaizer said:
Need some help from master... I brick my phone after adb sideload to install pixel experience. Now it stuck in edl mode. Last stock rom already flash to latest Android 12 retcn.
Click to expand...
Click to collapse
To whoever facing this problem. To be specifically, after I bricked my phone, I tried to blankflash but it give me error like "Sahara greet device" or anything like this. So after a while I'm searching for solution I found the way to avoid this kind of error in xda forum for another moto device... To avoid u need to hold down volume down button + power button at the same time run for blankflash.bat. And it works... Hope it can help u guys who facing this type of hardbrick... Cheersss...