Need some help from master... I brick my phone after adb sideload to install pixel experience. Now it stuck in edl mode. Last stock rom already flash to latest Android 12 retcn.
zackkaizer said:
Need some help from master... I brick my phone after adb sideload to install pixel experience. Now it stuck in edl mode. Last stock rom already flash to latest Android 12 retcn.
Click to expand...
Click to collapse
To whoever facing this problem. To be specifically, after I bricked my phone, I tried to blankflash but it give me error like "Sahara greet device" or anything like this. So after a while I'm searching for solution I found the way to avoid this kind of error in xda forum for another moto device... To avoid u need to hold down volume down button + power button at the same time run for blankflash.bat. And it works... Hope it can help u guys who facing this type of hardbrick... Cheersss...
Related
Hi,
I have root my phone. disabled some unnecessary apps, but i decided to factory reset, but when i open the phone top and bottom buttons were gone, no notifications. Now I cant do anything. How can i restore the whole OS back?
I have bring the stock recovery back but now i stuck!
now i cannot enter to bootlader
Trying with adb but it says not authorized. Authorize notify cant appear on screen i think its because huawei home not work properly.
And I cant even install anything from google play or local apk.
I think its bricked please help...
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Easy Computer said:
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Click to expand...
Click to collapse
Hi,
I have tried almost every steps except latest version update, because there is no latest version on Huawei Turkish website, latest one shows B133 but mine was B137, so it gives an error while starting the update from dload folder.
Hisuite doesnt recognize the phone.
Now I am downloading Huawei MT7-L09 CEE&Nordic European Channel V100R001C00B137SP03 Android 4.4.2 EMUI 3.0 This is not Turkish version but i hope I can install it with 3 button update procedure...
No luck...
It gave me "software install failed" error...
Now im scared to factory reset my phone... I hope you get to find a solution bro.
EzerchE said:
No luck...
It gave me "software install failed" error...
Click to expand...
Click to collapse
Easy Computer said:
Now im scared to factory reset my phone... I hope you get to find a solution bro.
Click to expand...
Click to collapse
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
i hope you get it to work again. good luck bro :good:
EzerchE said:
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
Click to expand...
Click to collapse
tuddu said:
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
Click to expand...
Click to collapse
Hi,
I flashed stock: boot.img, recovery.img, custom.img, system.img and cache.img inside from fastboot mode but no luck...
It gives this error immediately after reboot:
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1
And can't enter 3 buttons upgrade procedure
I think some system files are missing and it doesnt boot or enter to recovery mode...
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
EzerchE said:
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
Click to expand...
Click to collapse
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
alexre123 said:
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
Click to expand...
Click to collapse
Hi Alex,
I have rooted my phone, problem happened while i am wiping the boot, system and cust from CWM Recovery before the install new rom. I think its deleted something about sensors (on chinese forum they talking about iom3 error is related with sensors)
So phone didnt boot again.
I returned it to seller without any excuse. I just said I didnt satisfied with the phone. And they accept return and paid the money back in same day.
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
BoonmaC said:
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
Click to expand...
Click to collapse
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Venkata Lochan Nune said:
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Click to expand...
Click to collapse
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
BoonmaC said:
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
Click to expand...
Click to collapse
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Venkata Lochan Nune said:
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Click to expand...
Click to collapse
Or wait a sec, is your phone powered by mediatek? And is it booting to recovery? If yes, attach an image of the recovery.
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
emybuse said:
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
Click to expand...
Click to collapse
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
mdurkin said:
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
Click to expand...
Click to collapse
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
emybuse said:
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
Click to expand...
Click to collapse
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Amatöhr said:
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Click to expand...
Click to collapse
Fail : not unlock, help me
I didn't think I had to, when I plug in the tablet it pops up with the name and everything.
Hi, I have the same issue with a Tab 11 pro gen 2. Could you let me know how to solve it? I can't even find the recovery, and tried all button combinations. I can only go to fastboot or meta modes.
im literally stuck on this ( fastboot ) screen... it boots straight to this screen. If i plug the device into my pc it says device not recognised and none of the drivers seem to work. I have tried everything to shut it down so i can try flash via EDL, but the power button just takes me back to fastboot again...
I'm having the same reboot issue 1 minute or less after fully booting. I have no idea how to fix it
guys can you help me? my device poco x3 pro suddenly hang and I force reboot it then after that, it constantly rebooting endless until my phone run out of battery. I already tried recovery mode, i even hard reset it, fastboot using flashtools but still not able to find the solution. please i really need your help to revive my phone.
flyingsteps200 said:
guys can you help me? my device poco x3 pro suddenly hang and I force reboot it then after that, it constantly rebooting endless until my phone run out of battery. I already tried recovery mode, i even hard reset it, fastboot using flashtools but still not able to find the solution. please i really need your help to revive my phone.
Click to expand...
Click to collapse
Try with this tool https://www.xiaomitool.com/V2/
flyingsteps200 said:
guys can you help me? my device poco x3 pro suddenly hang and I force reboot it then after that, it constantly rebooting endless until my phone run out of battery. I already tried recovery mode, i even hard reset it, fastboot using flashtools but still not able to find the solution. please i really need your help to revive my phone.
Click to expand...
Click to collapse
hey buddy. did you eve find a fix? i am having the same issue
You can't flash anything with locked bootloader (yes, not even stock rom). Service centre is your best bet right now.