Database Info

SoftBricked Mate 7 Please Help

Hi,
I have root my phone. disabled some unnecessary apps, but i decided to factory reset, but when i open the phone top and bottom buttons were gone, no notifications. Now I cant do anything. How can i restore the whole OS back?
I have bring the stock recovery back but now i stuck!

now i cannot enter to bootlader
Trying with adb but it says not authorized. Authorize notify cant appear on screen i think its because huawei home not work properly.
And I cant even install anything from google play or local apk.
I think its bricked please help...

http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10

Easy Computer said:
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Click to expand...
Click to collapse
Hi,
I have tried almost every steps except latest version update, because there is no latest version on Huawei Turkish website, latest one shows B133 but mine was B137, so it gives an error while starting the update from dload folder.
Hisuite doesnt recognize the phone.
Now I am downloading Huawei MT7-L09 CEE&Nordic European Channel V100R001C00B137SP03 Android 4.4.2 EMUI 3.0 This is not Turkish version but i hope I can install it with 3 button update procedure...

No luck...
It gave me "software install failed" error...

Now im scared to factory reset my phone... I hope you get to find a solution bro.
EzerchE said:
No luck...
It gave me "software install failed" error...
Click to expand...
Click to collapse

Easy Computer said:
Now im scared to factory reset my phone... I hope you get to find a solution bro.
Click to expand...
Click to collapse
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...

If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.

i hope you get it to work again. good luck bro :good:
EzerchE said:
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
Click to expand...
Click to collapse

tuddu said:
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
Click to expand...
Click to collapse
Hi,
I flashed stock: boot.img, recovery.img, custom.img, system.img and cache.img inside from fastboot mode but no luck...
It gives this error immediately after reboot:
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1
And can't enter 3 buttons upgrade procedure
I think some system files are missing and it doesnt boot or enter to recovery mode...

Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.

EzerchE said:
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
Click to expand...
Click to collapse
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.

alexre123 said:
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
Click to expand...
Click to collapse
Hi Alex,
I have rooted my phone, problem happened while i am wiping the boot, system and cust from CWM Recovery before the install new rom. I think its deleted something about sensors (on chinese forum they talking about iom3 error is related with sensors)
So phone didnt boot again.
I returned it to seller without any excuse. I just said I didnt satisfied with the phone. And they accept return and paid the money back in same day.

Lenovo S856 China Unbricking tutorial

Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.

Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse

Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.

way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?

This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.

There's any hope for hard bricked Moto G3? (no fastboot, Qdloader 9008)

Hi guys its the 3rd time that i post here in the forum hopping to restore my "dead" Moto G3 XT1543 1GB RAM Snapdragon 410 (MSM8916).
Some days ago I've unlock my phone bootloader in order to install CM14.1 and i did it with success! but my sim card wasn't working, so, I tried to look for a solution. And I found a video on youtube that showed the supost fix for this issue, but i was wrong. I've flashed the file which broke my phone immediately and now my phone doesn't do ANYTHING!! Well, at least it shows on my computer as QDLoader 9008 but for now on I dont know what I have to do! I know that the easiest way to fix it is buying another motherboard, but I think that still hope for someone to find the way to fix it! Well, if the pc recognizes the processor so there's something to be done right?
I had searched all over the internet during this week, and I found some interesting possible ways to fix it, but im not a developer so I need help and opinions from other people.
1)The first way was to change the mode to 9006 aka diag mode though some files wich in theory allows you to acces eMMC partition and restore all the 29 inside partition and recover your phone. The problem is: I don't know how to change it to diag mode, but yea i have the needed files, and i don't have the tool to acces the eMMC of the phone and i dont have a backup of the partitions to write over the corrupted ones.
2)The second way was to use this tutorial *http://www.droidsavvy.com/unbrick-qualcomm-mobiles/* that i still havent tried since my phone isn't with me right now. So, in this supose way we can contact the phone through a tool called QFIL and try to "Inject" the bootloader or whatever, in the phone to foce him into a bootloop and so enabling the fastboot mode which allows you to install a rom later on. well the problem for this one is, i dont know if it works on your moto g3 but i gonna try. (if you try this option tell me and i gonna upload the needed files because the folder avaliable in the link contais files for the processor Snapdragon 610 and Moto G3 processor is a 410)
3) The third way is a Jtag repair in a authorized store, but i dont think Moto G3 have a jtag fix (im posting this possibility because i could be wrong)
4) In this way could be a updated Blank Flash actually used to hard unbrick the Moto G1 and I Guess the G2? But im not a developer and I dont know too much about programing, but i'm sure someone out there is a pro
5) Use the QPST which is kinda the same thing as use a eMMC tool? ( again im not a dev ) and from what i got, is used to config all your phone from scratch. would be good if there's a tuto out there
6) Sit and wait till Motorola release the MBM-CI 5.0 which from what i got is used like the Blank Flash or used to make a Blank Flash idk
AGAIN!!! IM NOT A DEV, THIS IS JUST SOME WAYS THAT I FOUND OUT THERE ON THE INTERNET WHICH COULD BE USED TO FIX YOUR BELOVED MOTO G3!! SO, I'M SHARING ALL MY RESEACH WITH YOU GUYS BECAUSE IS A SHAME HAVE TO DUMP MY DEVICE LIKE THAT OR HAVE TO EXPEND LIKE R$ 500 IN A NEW MOTHER BOARD WHICH IN DOLLAR ITS LIKE 1600 U$D (this is Brazil guys yea it's a horrible country T_T ) SO I HOPE THAT THIS POST HELPS SOMEBODY AND IF YOU GOT SOME INFO SHARE TO HELP US TRY TO FIX THE PHONE!

hey you got successful??? in unbricking your phone?

[email protected] said:
hey you got successful??? in unbricking your phone?
Click to expand...
Click to collapse
not yet, i send my phone to an authorized i hope they can fix it via programming box

IkkyShad said:
not yet, i send my phone to an authorized i hope they can fix it via programming box
Click to expand...
Click to collapse
Ohhkay

You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low

siredux said:
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
Click to expand...
Click to collapse
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares

IkkyShad said:
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
Click to expand...
Click to collapse
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable

[email protected] said:
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
Click to expand...
Click to collapse
yeah, you can try but the models are different and also the partitions inside the phone... try it out and if it works you can post here

No u can't try the Moto g2 firmware..... As Moto g2 is also waiting for MBM CI 5 file for lollipop and Motorola is not releasing those file needed for blankflash

Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)

Jaysin365 said:
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Click to expand...
Click to collapse
No... And just like previous Moto devices, it is unlikely we will ever get the necessary files.

Same situation, any updates?
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Click to expand...
Click to collapse
I appreciate any help!

gibarsin said:
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
I appreciate any help!
Click to expand...
Click to collapse
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.

acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
Thanks for the quick reply, I will post my results here whether it's successful or not.

acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
+1 on this.
The only other thing I would do is take it apart and detach one wire from battery and short that lose wire to the other wire (short the phone, NOT the battery!) for 15 sec or so and reconnect wire to battery and put phone back together and try boot to bootloader (power plus vol-dn). If no go, at that point if it were worth it I would give it to ATT to fix, or toss it in the drawer for parts.

I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this

Durga teja said:
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Click to expand...
Click to collapse
Tell us how you bricked it?

KrisM22 said:
Tell us how you bricked it?
Click to expand...
Click to collapse
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh

Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
beyond my knowledge. Hopefully someone will jump in.

Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
If there is no bootloader and the only thing that can be seen on the computer is QdLoader mode, it's done... Send it to Moto for repair or send it to the recycler, there is no fix we can do.

OppO Phone Power On problem

Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803

BoonmaC said:
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
Click to expand...
Click to collapse
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.

Venkata Lochan Nune said:
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Click to expand...
Click to collapse
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you

BoonmaC said:
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
Click to expand...
Click to collapse
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?

Venkata Lochan Nune said:
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Click to expand...
Click to collapse
Or wait a sec, is your phone powered by mediatek? And is it booting to recovery? If yes, attach an image of the recovery.

Techno Mobile Stuck at Techno LOGO

Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.

f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair

thanks brother, it worked.

f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.

mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.

f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?

mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help

w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?

its a phone repair program ... i tried with others tools and no luck