my OnePlus 8 went to crashdumpmode on 26 dec after the 11.0.4.4 update while using the phone suddenly it got stuck and booted into crashdumpmode i tried to restart phone but its not working then u went to service centre and they said this a hardware issue and i need to change the motherboard and it will cost 27k. I came back and tried edl mode flashing throug msm tool fule flashed but device isn't booting stuck on OnePlus logo please help me attached images for better details thanks in advance
MSM should be able to restore your phone to a working state.. is it possible that you're using the wrong MSM tool/flashing the wrong images? I'd double check that and try reflashing.
duzzqqqq said:
MSM should be able to restore your phone to a working state.. is it possible that you're using the wrong MSM tool/flashing the wrong images? I'd double check that and try reflashing.
Click to expand...
Click to collapse
I have uploaded all the file picture below tried these all will you check and confirm is it wrong or right
duzzqqqq said:
MSM should be able to restore your phone to a working state.. is it possible that you're using the wrong MSM tool/flashing the wrong images? I'd double check that and try reflashing.
Click to expand...
Click to collapse
I have OnePlus 8 indian variant 8/128 can you please share the right msm tool
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Did you get yours off of this thread ?
Yes Indian variant tried almost all files nothing worked
Related
Hi there,
I need your brains as I screwed up big times ...
I was trying to install the unstable build lineage-18.1-20201213_014028-UNOFFICIAL-kebab-gms.zip on my 8T
After the reboot the message the only message I was getting was ' Your Bootloader is unlocked ...' I flashed older lineage Version with the same result.
I found a Thread where they where talking about the current slot (which was B) I tried fastboot set_active other and It changed to Bank this resulted in the Qualcom CrashDump Mode
Msm Download tool has communications with my Phone but I did not find the right Image for my phone
Did you check out this guide?
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
This is the wrong forum for this post... but, check https://forum.xda-developers.com/f/oneplus-8t-guides-news-discussion.11585/
for what you are after..
I need some help, made a stupid mistake and now phone is stuck on qualcom crashdump mode; attempted to kill init! exitcode=0x00007f00 do_exit
I had the cyberpunk resource magisk module installed, which changes the flag, and I did the tmo 2007 varriant convert to global rom. I stupidly forgot to remove the magisk module first and restore original flag. Now Im stuck on the qualcom crashdump mode. i can boot into recovery. Also in fastboot mode for bootloader version and baseband version there is nothing there its blank, not sure if that helps. Did I brick my phone, please help thx
yes you bricked your device. Follow this guide
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Yesterday I installed the latest OxyzenOS 11 official update to my Oneplus 7 pro. But Unfortunate This evening the phone turned off and show this message "Your device is corrupt. It can't be trusted and will not boot. Please visit this link from another device. g.co/ABH."
Now, I can flash my device to solve this but at that time all data will be lost.
The data on my phone is very important to me and unfortunately, I don't have any backup. It means a lot to me.
So, I badly need to recover the data.
PS. 1. I only can enter fastboot mode and can't enter recovery mode.
2. Bootloader locked.
3. Don't have any custom recovery mode like TWRP.
4. Never installed any custom rom on my phone or any unofficial update.
You are in a bit of a situation, there is no working recovery for OOS 11, and you can't do much with a locked bootloader apart from using the MSM tool. That'll will delete your files though.
Yes Brother. Can you please give me the download link of MSM Download tool for op7pro android 11 (oxyzen os 11) global version. I tried several msm tool but nothing worked. I am in puzzled what to do now. Please help if you can .
So far there is no MSM tool for OOS 11,
[OP7PRO][LATEST OOS 11.0.5.1 GM21AA/GM21BA] Collection of unbrick tools
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
@soka said:
So far there is no MSM tool for OOS 11,
[OP7PRO][LATEST OOS 11.0.5.1 GM21AA/GM21BA] Collection of unbrick tools
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
So there is no way by which I can unbrick my phone ???
No, you can restore your phone. The MSM version is just what you will end up on after done.
Okay I have tried different version of MSM tool and followed unbricking process. On MSM Download tool after flasing about 300s later the status shows download complete but device still can't boot and shows Your device corrupt message.
Now what can I do, Can you tell me please ? I am so much depressed. I have tried a lot of method but nothing helps.
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
emybuse said:
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
Click to expand...
Click to collapse
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
mdurkin said:
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
Click to expand...
Click to collapse
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
emybuse said:
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
Click to expand...
Click to collapse
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Amatöhr said:
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Click to expand...
Click to collapse
Fail : not unlock, help me
I didn't think I had to, when I plug in the tablet it pops up with the name and everything.
Hi, I have the same issue with a Tab 11 pro gen 2. Could you let me know how to solve it? I can't even find the recovery, and tried all button combinations. I can only go to fastboot or meta modes.
im literally stuck on this ( fastboot ) screen... it boots straight to this screen. If i plug the device into my pc it says device not recognised and none of the drivers seem to work. I have tried everything to shut it down so i can try flash via EDL, but the power button just takes me back to fastboot again...
I'm having the same reboot issue 1 minute or less after fully booting. I have no idea how to fix it
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
thanks brother, it worked.
f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.
mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?
its a phone repair program ... i tried with others tools and no luck