Hello there,
I have been trying to calibrate the altimeter on this amazing watch. I checked both on the watch and the Huawei Health app, but there is not an option to calibrate the altimeter when you are at a point with a known and certain altitude.
Anybody could help please?
This is such a simple option that would allow to make this watch way more reliable for mountain use.
Thanks a lot
Richacinas said:
Hello there,
I have been trying to calibrate the altimeter on this amazing watch. I checked both on the watch and the Huawei Health app, but there is not an option to calibrate the altimeter when you are at a point with a known and certain altitude.
Anybody could help please?
This is such a simple option that would allow to make this watch way more reliable for mountain use.
Thanks a lot
Click to expand...
Click to collapse
Nobody knows??
Then I assume this altimeter is useless. If you cannot calibrate it, then it doesn't work in the mountain at all. It is not reliable.
This issue persist even from original first Gt watch. Was never fixed. Due almost non existent support from Huawei, I'm almost certain it will never be fixed. On the other hand I see on Honor GS pro there is an option to do so but barometer not. And it always shows wrong readings. Strange.
Whatever...at the end of the day it's China based company, what did you expect
Related
Hi to all.
I've a little problem: I go to work with a motorcycle and my S2 recognize it as a sporty activity (cycling): is there a way to stop this behaviour?
Thanks
GS
Italy
GS, I'm with you. I have the exact same problem. Every day I have to zero out the record for that day and then I turn off the cycling tracker (hoping that it just might stay disabled, but of course it never does). I wish there was a way to permanently disable this tracker, as I seldom ride a bicycle and could easily do without tracking this activity...
There automatic activity recognition settings in S Health. Just go to settings
Sorry but I don't have this option...
It seems that you can disable all automatic detections, and that you can not select with detection disable...
GS
ITALY
I have this same issue, the only solutions I've found are:
1) Download S-Health and disable it through manage items, but that does nothing.
2) Contact Samsung for support, which I've read is basically the first solution.
I want to set my watch for all my notifications but I think it's weird how you can't disable a function like that. I also tried factory resetting my watch to no avail...
Same problem here.
I don't want to disable cycling because i DO cycle sometimes and want to record it.
What annoys me is everytime I step in my car or ride a motorbike it detects me as cycling for a few hours.
Seems to be no way to disable it.
Anyone found a fix?
I'm still having the same problem. Strangely, it only seems to happen in my truck. When I drive the sedan, nothing happens and my watch works as intended. i'm not sure what I do in the truck that has my watch convinced I'm cycling down the highway at 70 MPH.
I've had to run off auto-detect which makes me sad because I forget to log my walking and my elliptical all the time. The watch we very good at detecting these 2 activities.
For future users who end up here with a google search:
the workout auto-detection settings are not the the S-Heath (or now "Samsung Health") app on your phone, they are in the S-Heath app that's on the watch itself. In last screen, "settings"
does anybody know how to calibrate the altimeter on the watch 2? it does work very precise tracking how many meters you ascent or descent while out and about, but knowing your excact altitude depends on barometric presure which is variable and needs calibrating. there is one standard watch face included called 'outside' on the watch which shows pressure and current altitude, but i cant seem to find a way to calibrate the altimeter. anybody any ideas?
glenner05 said:
does anybody know how to calibrate the altimeter on the watch 2? it does work very precise tracking how many meters you ascent or descent while out and about, but knowing your excact altitude depends on barometric presure which is variable and needs calibrating. there is one standard watch face included called 'outside' on the watch which shows pressure and current altitude, but i cant seem to find a way to calibrate the altimeter. anybody any ideas?
Click to expand...
Click to collapse
Did you ever find a way? I'm at sea level and it tells me I'm -21m
Sent from my Pixel 2 using Tapatalk
It's not that simple, and it's probably nothing that should be calibrated too. Giving you the altitude, based only on the barometic pressure (which is the sensor that the watch has), it's impossible. You need the local temperature too. Since the watch doesn't have a temp sensor, it relies on the temperature received from the internet to calculate the altitude. So, if the temperature is not accurate enough, it wil show you incorrect altitude "readings".
you can calibrate it by tapping the weather icon on Outdoor watch face ( see https://consumer.huawei.com/en/support/faqs/detail/?id=154328&name=HUAWEI WATCH 2 ) .It has nothing (or very little) to do with temperature. Altitude can be directly estimated from pressure, the problem is that air pressure varies over time (cyclone, anticyclone...).
More to the point is how to calibrate the barometer. It reads way too low (by 9mb/hPa).
I currently have a HW2, and thinking of trading it in for the GT, as I like the idea of the long battery life, I mainly use the step, GPS for running, sleep tracking that Huawei health provide, I only use the basic notifications and use the Huawei watch faces, would it be a good change or should I keep the HW2, anyone else changed from the HW2 to the GT, any advice thanks
https://forum.xda-developers.com/watch-2/how-to/huawei-watch-gt-unboxing-look-t3858732
I'd stick...
I am looking at purchasing the UK version with BP and ECG and currently have a A52 phone to work with it.
I currently use a Fitbit Charge 4 but really need a device with ECG. Anyone coming from a Fitbit or Garmin or other device with good sleep tracking care to comment on how close the GW4 compares? From the reviews and comments under the reviews it looks like there might be some bad batches of GW4's out there in the wild that are not performing as good as some others?
The sleep tracking on GW4 (same as in previous models like GW3 etc) is Not good. It mainly misses most the deep sleep cycle. I've also had Fitbit before and it seemed better. The best sleep tracker is the Oura ring which I also use and sometime compare with the GW4, which again fails to track deep sleep
stakoz said:
The best sleep tracker is the Oura ring which I also use and sometime compare with the GW4, which again fails to track deep sleep
Click to expand...
Click to collapse
Try using Sleep as Android (works with both Tizen and WearOS). Not sure if they've optimized for GW4 yet, but I find Sleep as Android very comparable to Oura - deep sleep metrics are a very inexact science, but agree Samsung watch algorithms do that poorly.
The other nice thing about Sleep as Android is it also graphs SpO2 (again, not sure they've added support for GW4 yet) and HRV. So the only metric missing from that equation is temperature (which can be very useful) that Oura does do.
I am using a beta version of sleep as android created especially for GW4 support. You can check if the update is live yet or also join their beta program.
edit:
for anyone who is interested:
Samsung Watch 4
Hello @sonofanut, I think you are right. Google did just removed the Sleep as Android Wear OS app from the Play Store… This is part of their “rising the quality bar” initiative. The reason in the notice is we are not showing the the time of the next alarm on the tracking screen… The reason for...
forum.urbandroid.org
Hi I've the galaxy watch 4 classic, I've the heart and stress on continuous, but sometimes the green light on the back doesn't flash at all, is that normal??Hi I've the galaxy watch 4 classic, I've the heart and stress on continuous, but sometimes the green light on the back doesn't flash at all, is that normal??
Darbar1701 said:
Hi I've the galaxy watch 4 classic, I've the heart and stress on continuous, but sometimes the green light on the back doesn't flash at all, is that normal??Hi I've the galaxy watch 4 classic, I've the heart and stress on continuous, but sometimes the green light on the back doesn't flash at all, is that normal??
Click to expand...
Click to collapse
You might want to start a thread if you are having issues as you will defiantly get more responses.
Anyone check if the sleep tracking has improved any with the latest firmware/software updates to the GW4?
Also is anyone using the ECG feature? That is one of the main features I need as I have heart palpitations on a regular bases but of course whenever I go the doctors it never occurs so its not something they can ever see on a machine and would like to try and catch it on the GW4 when I have an episode to see what it is actually doing.
Hi,
I've only just got my GW4 (after upgrading from the original GW). One thing i noticed is that although i have heart rate set to "Measure continuously", it doesn't seem to work on watch faces i downloaded from the play store. On those faces it rarely seems to update and i often have to press the icon on the face to get it to update manually. This used to work on the original Tizen GW. Is this a bug or deliberate? Is there any workaround ?
Hello,
From what I have read, watch faces has its own method for reading the HR, who is not correlated with the Samsung Health HR setting.
Creators can set the update interval and normally they put an interaction to manually trigger the measurement.
I never work with watch faces, but I think it's possible to create one with a lower interval period.
This is a question that I also had because all of the watch faces that arent from Samsung has this annoying issue and the other watch faces from Samsung aren't even available which sucks. I thought someone would have been able to create some work around since it was based on android now.
I am using the I-Digit watch face and continuous monitor works on it, but you have to have the AOD enabled. The setup app told me this, so I turned it on and it works just fine. You mite try that on the watch face you are trying.