Bass Boost on every Custom Rom - Xiaomi Redmi Note 6 Pro Questions & Answers

Hello,
in the last days i tried many different custom roms like Havoc OS or Syberia Project but all have the same issue on every custom rom is a extreme Bass Boost while listening to music over the Headphone Jack (except Oxygen OS there is the sound normal but the Rom has many bugs) . The sound is so terrible because of the Bass Bost and there is also no Equalizer on every Rom and i havent changed anything. Does anyone now a solution to fix the problem or must i flash stock MIUI ?

JoystickTC said:
Hey! Try using any equalizer like AudioFX that comes pre installed with most custom ROMs. From there you can lower the bass
Click to expand...
Click to collapse
Best of Luck!

Nitin Rai said:
Best of Luck!
Click to expand...
Click to collapse
unfortunately there are no equalizer apps or settings in any roms i tested other than miui where there is no this problem

sand2 said:
unfortunately there are no equalizer apps or settings in any roms i tested other than miui where there is no this problem
Click to expand...
Click to collapse
Oh that's sad

Related

[Q] is it possible to increase headphone sound

Is there a way to increase the headphone sound on android devices. I'm using a SGS II running on wizzedkat 2.6 rom using philz kernel?
emil90 said:
Is there a way to increase the headphone sound on android devices. I'm using a SGS II running on wizzedkat 2.6 rom using philz kernel?
Click to expand...
Click to collapse
Definitely you can. There are lots of audio mods available you can choose anyone.I personally like viper4android. it is pretty easy to install and remove
here is the link.
http://forum.xda-developers.com/showthread.php?t=2191223
Yep!
droidshan said:
Definitely you can. There are lots of audio mods available you can choose anyone.I personally like viper4android. it is pretty easy to install and remove
here is the link.
http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
emil90 said:
Is there a way to increase the headphone sound on android devices. I'm using a SGS II running on wizzedkat 2.6 rom using philz kernel?
Click to expand...
Click to collapse
Personally, if I can I use Viper too but also Volume Plus or Vodoo Louder APKs which have done the job very well so far...
Here http://goo.gl/M1vpUC and also there http://goo.gl/Gm1Sru and with pimp my rom, you can increase the volume during a phone call if you go to tweaks at the bottom of the menu, telephony and set the AMR Wideband on ... Enjoy...

[Q] Beats or Xlouder or Dsp Manager or Any Sound Enhancement

Hey Guys,I Wonder if there is a Sound Enhancement Mod for our device.I Would like to use any audio enchancer to increase music quality of A117.Does anyone has a Mod?Could any Dev try to port these mods for A117.
I have already had a look at Dolby Digital Mod.
Viper4android works on all android devices
here you go...this is the tutorial input the settings and change according to your taste...good luck
http://forum.xda-developers.com/showthread.php?p=45462666#post45462666
personal opinion: Tracks compression and dolby sounds best...keep experimenting
yes, Viper4android is one of the best.
Viper4Android is best
Rht555 said:
yes, Viper4android is one of the best.
Click to expand...
Click to collapse
OK,I agree with you.It,s the best.But I need some of the best settings for viper4android.
Harish Ambati said:
OK,I agree with you.It,s the best.But I need some of the best settings for viper4android.
Click to expand...
Click to collapse
Did you visit the link I provided....the settings are mentioned there...all you need to do is choose the kernel of your choice
Be sure to turn off any in app equallizer before using viper4android
Viper4android Settings
tu5h7r said:
Did you visit the link I provided....the settings are mentioned there...all you need to do is choose the kernel of your choice
Be sure to turn off any in app equallizer before using viper4android
Click to expand...
Click to collapse
Thanks a lot for your reply.Already pressed the thanks button.

Headphone speaker volume too low in CM12 based ROMS

Hello All,
I need some help. I have tried CM12, Resurrection remix, liquidsmooth and other CM12 based lollipop roms. I have found headset and speaker volume is low compared to touchwiz roms. I did some r&d and found out in CM12 roms volume has been tweeked to make it bit low. Am not sure whether that would help in performace, but it doesnt matter. I need help in tweeking the volumes back to normal as in touchwiz roms. I use DN4 as of now in N7100 Note 2. I love lollipop roms but low volume makes me switch back to touchwiz roms. please help. thanks in advance. :crying:
ironmanxda said:
Hello All,
I need some help. I have tried CM12, Resurrection remix, liquidsmooth and other CM12 based lollipop roms. I have found headset and speaker volume is low compared to touchwiz roms. I did some r&d and found out in CM12 roms volume has been tweeked to make it bit low. Am not sure whether that would help in performace, but it doesnt matter. I need help in tweeking the volumes back to normal as in touchwiz roms. I use DN4 as of now in N7100 Note 2. I love lollipop roms but low volume makes me switch back to touchwiz roms. please help. thanks in advance. :crying:
Click to expand...
Click to collapse
Use the app Viper4Android and modify the settings in it as you wish to get more loudness.
Set the Max Gain to 8x in it. Before that, Select UI setting as 'Expert' on options
GokulNC said:
Use the app Viper4Android and modify the settings in it as you wish to get more loudness.
Set the Max Gain to 8x in it. Before that, Select UI setting as 'Expert' on options
Click to expand...
Click to collapse
Thank you Gokul for the reply. I will surely try that now itself.
Sent from my GT-N7100 using xda premium
ironmanxda said:
Thank you Gokul for the reply. I will surely try that now itself.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
For using Viper4Android with Lollipop based roms, you'll need a "permissive" kernel OR you need to change your SE Linux mode to "permissive" using SELinux Mode Changer.

Dolby Atmos and Viper Extension (6+ Version) 100% Working Confirmed on Mi PAD

https://drive.google.com/file/d/0B8PRddlJuQ81ZHFLdTRDa185bzg/view?usp=sharing
Enjoy Atmos Music in MI PAD .
Thanks to the Original Source
jeswinkumar said:
https://drive.google.com/file/d/0B8PRddlJuQ81ZHFLdTRDa185bzg/view?usp=sharing
Enjoy Atmos Music in MI PAD .
Thanks to the Original Source
Click to expand...
Click to collapse
Flash in recovery?
MiliWanili said:
Flash in recovery?
Click to expand...
Click to collapse
Yes. Direct flash in recovery . Root access required.
It installed fine. Thanks. But on the other hand I hear cracking sound when I enable it, goes away after disabling. Have you experienced same or all smooth sailing?
Doku said:
It installed fine. Thanks. But on the other hand I hear cracking sound when I enable it, goes away after disabling. Have you experienced same or all smooth sailing?
Click to expand...
Click to collapse
You have experienced it in Bluetooth or headphones.?
Which custom rom ?
jeswinkumar said:
You have experienced it in Bluetooth or headphones.?
Which custom rom ?
Click to expand...
Click to collapse
This is on Lineage 14 9/11 build. Directly from speakers, no Bluetooth.
Doku said:
This is on Lineage 14 9/11 build. Directly from speakers, no Bluetooth.
Click to expand...
Click to collapse
I have tested it in all builds of lineage and all custom roms. No issues in crackling or skipping audio in Direct speakers.
It is been reported that only in Bluetooth audio crackling or skipping happening. That is also due to Lineage 09/11 Build has used open source Bluetooth lib file. because in other roms that issue is not there.
Try Dirty Flash bro. Direct Speakers No issue. Blue tooth Speaker , Yes u have an issue with Lineage 09/11 and 09/08 , RROS also.
jeswinkumar said:
I have tested it in all builds of lineage and all custom roms. No issues in crackling or skipping audio in Direct speakers.
It is been reported that only in Bluetooth audio crackling or skipping happening. That is also due to Lineage 09/11 Build has used open source Bluetooth lib file. because in other roms that issue is not there.
Try Dirty Flash bro. Direct Speakers No issue. Blue tooth Speaker , Yes u have an issue with Lineage 09/11 and 09/08 , RROS also.
Click to expand...
Click to collapse
Thanks man. Is it possible to post pictures of your Viper configuration? There are some settings in viper where crackling goes away but audio quality is a shade down. Maybe I will try to mirror your settings.
Everything work fine on me.??sound perfect

[ROM][Stable] MIUI 10 xiaomi.eu

10.3.5.0
https://sourceforge.net/projects/xi...Note5Pro_V10.3.5.0.PEICNXM_v10-9.zip/download
https://androidfilehost.com/?fid=1899786940962570692
10.3.4.0
https://sourceforge.net/projects/xi...Note5Pro_V10.3.4.0.PEICNXM_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117919441
10.3.3.0
https://sourceforge.net/projects/xi...Note5Pro_V10.3.3.0.PEICNXM_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117904662
10.3.1.0
https://sourceforge.net/projects/xi...Note5Pro_V10.3.1.0.PEICNXM_v10-9.zip/download
https://androidfilehost.com/?fid=6006931924117885364
10.3.4.0
https://sourceforge.net/projects/xi...te5Pro_V10.3.4.0.OEICNXM_v10-8.1.zip/download
https://androidfilehost.com/?fid=1395089523397943639
10.2.2.0
https://sourceforge.net/projects/xi...te5Pro_V10.2.2.0.OEICNXM_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603914638
10.0.2.0
https://sourceforge.net/projects/xi...te5Pro_V10.0.2.0.OEICNFH_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410932744536984677
New links will be posted here.
Ota Supported ??
Thanks for the link though
Camerado said:
10.0.1.0
https://sourceforge.net/projects/xi...te5Pro_V10.0.1.0.OEICNFH_v10-8.1.zip/download
https://androidfilehost.com/?fid=1322778262903996300
New links will be posted here.
Click to expand...
Click to collapse
China or global?
s7edge4life said:
Ota Supported ??
Thanks for the link though
Click to expand...
Click to collapse
Yep, supported.
i have installed it. do you how i can restore google backup?
If I clean flash it over MIUI9, will I lose my internal storage?
Global or china version??
To be sure, these .EU ROMs doesn't affect ARB rigth? I'm still ARB3. Thank you.
White_Lion said:
To be sure, these .EU ROMs doesn't affect ARB rigth? I'm still ARB3. Thank you.
Click to expand...
Click to collapse
there is no arb on all xiaomi.eu roms
this build is not on xiaomi website, strange ...
murigny64 said:
there is no arb on all xiaomi.eu roms
this build is not on xiaomi website, strange ...
Click to expand...
Click to collapse
There are not announcements on this version but if you check the download links in their website in Stable releases you will find the link posted here. I guess this is based in China ROM. What´s the difference? Language only?
I been using it with blackbox 1.5 kernel, everything's great. It does support third-party themes, Gcam's working fine. the problem I'm having is the low sound output from the headphone jack, I've tried viper4android it did helped a bit but still lower sound compared to any other custom roms like Aex, Ressurection, Havoc, even the stock miui 9.6.4.0.
Another problem is with kernel auditor app (battery optimization turned off, Auto start enabled) My customized settings keep coming back to default values. any solution to that??
s7edge4life said:
I been using it with blackbox 1.5 kernel, everything's great. It does support third-party themes, Gcam's working fine. the problem I'm having is the low sound output from the headphone jack, I've tried viper4android it did helped a bit but still lower sound compared to any other custom roms like Aex, Ressurection, Havoc, even the stock miui 9.6.4.0.
Another problem is with kernel auditor app (battery optimization turned off, Auto start enabled) My customized settings keep coming back to default values. any solution to that??
Click to expand...
Click to collapse
What's the difference between china rom and global? It has play store? Something missing?
eldoggor said:
What's the difference between china rom and global? It has play store? Something missing?
Click to expand...
Click to collapse
It has playstore, Google services installed No Chinese bloated apps. It has all the Chinese features likr Ai preloading etc
nothing missing everything stable smooth perfect daily driver
Just flashed it a few hours ago. The first problem I've seen is the slowness of the fingerprint sensor...
Sad, because It was so fast in Miui 9
Is anyone facing battery drain on the rom? I get 7 h where I used to get 9 to 10h SOT
Half Alive said:
Is anyone facing battery drain on the rom? I get 7 h where I used to get 9 to 10h SOT
Click to expand...
Click to collapse
Same here, even with the official beta MIUI 10....
Otarie004 said:
Same here, even with the official beta MIUI 10....
Click to expand...
Click to collapse
Kirks kernel seemed to fix the problem..
However try version 2.0..Couldn't go pass the lockscreen with the 2.1 version.
s7edge4life said:
I been using it with blackbox 1.5 kernel, everything's great. It does support third-party themes, Gcam's working fine. the problem I'm having is the low sound output from the headphone jack, I've tried viper4android it did helped a bit but still lower sound compared to any other custom roms like Aex, Ressurection, Havoc, even the stock miui 9.6.4.0.
Another problem is with kernel auditor app (batttery optimization turned off, Auto start enabled) My customized settings keep coming back to default values. any solution to that??
Click to expand...
Click to collapse
change region to india or andorra..sound will be better.
smokerman said:
change region to india or andorra..sound will be better.
Click to expand...
Click to collapse
My region is already been set to India, I hope you are joking
Has this Rom the antirollback like miui stock?
Because I'm coming from last beta devoloper miui 10

Categories

Resources