Hi!
I just want to know what is the min-max values of temperature that keeps my phone working good without problems or risks.
I've my cpu overcloacked to 1.3GHz
Normally i've 30°-36° and when i'm playing, the max i've seen was 40°, someone knows what are de recommended values or something like that?
Temps for battery have a lot to do with the rom your on. Some roms will run the same kernel but will overheat my battery more I've noticed.
I'm pretty new to Android. I got my N5 2 months ago and rooted it as soon as I took it out of the box to get rid of the navigation bar. Didnt install any ROM or kernal.
What I did today was try to overclock it. I wanted to test the performance upgrade with Geekbench 3.
I got 2500. Tried to overclock with this app called: No-frills CPU control. And suddenly I get no higher than 2000...... Tried everything. I'm stuck at a multi core score of 2000 in geekbench while it should be 2500>.
WTF DO I DO? My device is noticeably slower, it's like a GS4 D: I'd rather not install any kernals/Roms
I set the minimum CPU frequency to 300Mhz and max to 2.266Ghz
Hi,
Thermal throttling..., overclocking produces more heat than the stock CPU freq so more thermal throttling. To prevent any damage, the CPU freq decreases according to the CPU temperature...
Let cool down your phone.
Hammer_Of_The_Gods said:
Hi,
Thermal throttling..., overclocking produces more heat than the stock CPU freq so more thermal throttling. To prevent any damage, the CPU freq decreases according to the CPU temperature...
Let cool down your phone.
Click to expand...
Click to collapse
Sure, I'll turn it off for a while.
Just to make sure: the standard CPU frequencies are 300Mhz MIN and 2.266Ghz MAX, right?
Fandrold said:
Sure, I'll turn it off for a while.
Just to make sure: the standard CPU frequencies are 300Mhz MIN and 2.266Ghz MAX, right?
Click to expand...
Click to collapse
Yes, that's right 300 Mhz-2,26 Ghz.
Not necessary to turn your phone OFF , when it boots it's a process that causes "heat" at the beginning then you will need to let it cool down again. EDIT: oups, you mean the thermal throttling OFF maybe?
Don't touch it for a while, airplane mode can help. If you are in a "hot" country/weather, air cooling, fridge...
We speak about this here: http://forum.xda-developers.com/goo...5-user-benchmark-thread-added-t2506965/page42.
Hammer_Of_The_Gods said:
Hi,
Thermal throttling..., overclocking produces more heat than the stock CPU freq so more thermal throttling. To prevent any damage, the CPU freq decreases according to the CPU temperature...
Let cool down your phone.
Click to expand...
Click to collapse
I've let it cool down and I got my old performance back . Never knew the solution would be so simple. Thanks.
I notice the top of the phone gets really hot when I play games. So far I've only been testing plants vs zombies 2 with a cpu temp app and the cpu temp averages at 62 celsius which is fine on a cold day. However, on a warm day it tends peaks into the 70s and my cpu temp alarm goes off and I can't play more than a few minutes. I've tried to use powersave mode to lower the clock speed and it doesn't make a difference. I think the sandstone backing doesn't dissipate heat as well as a normal plastic/metal backing. I know the cpu is supposed to have thermal throttling, but I'm wondering if there are any non-stock kernels that may have a more aggressive thermal throttle.
Flash CM11 and a costum kernel. Any of them will let you over and underclock, over and undervolt, raise or lower throttling, but not on stock rom.
still overheating
I've flushed CM11 stockrom.
Now when i use waze and charge the opo it gets overheated too.
+ the touch won't work correctly.
Is there another way to stop this?
I have been able to fix quite a bit of thermal throttling experienced in multiple benchmark runs by tweaking with the thermal-engine configuration file. With just a few changes and with the copper shim mod I can now run geekbench for as many five times with almost no drop in score. After that I get no thermal throttling in single core but I have it setup to disable two cores after it hits 55C CPU temp in core 4 and 7. I use CPU Z to see actual CPU temp from the sensor readings. Even after 8 Geekbench runs the two cores are still running at full speed and the phone is registering 44C. It's warm but not hot by any means.
If anyone is interested in playing around with it just look for the file in \System\etc\thermal-engine-8994.conf
Most of it is just two adjustments. One for Max temperature at which it will throttle and the one below is the temperature at which throttling stops.
probaina said:
I have been able to fix quite a bit of thermal throttling experienced in multiple benchmark runs by tweaking with the thermal-engine configuration file. With just a few changes and with the copper shim mod I can now run geekbench for as many five times with almost no drop in score. After that I get no thermal throttling in single core but I have it setup to disable two cores after it hits 55C CPU temp in core 4 and 7. I use CPU Z to see actual CPU temp from the sensor readings. Even after 8 Geekbench runs the two cores are still running at full speed and the phone is registering 44C. It's warm but not hot by any means.
If anyone is interested in playing around with it just look for the file in \System\etc\thermal-engine-8994.conf
Most of it is just two adjustments. One for Max temperature at which it will throttle and the one below is the temperature at which throttling stops.
Click to expand...
Click to collapse
Without your copper shim mod have you found any better but safe values we can try?
At least no thermal throttle until 55 celsiius
It should be safe without the copper shim. The thermal pad it comes with works pretty well. It will still thermal throttle to whatever temperature you set it at so it won't cause any harm.
I've set the Big cluster to a max of 65C and a single A57 core to up to 71C and haven't had any problems yet. I used to get horrible performance with PPSSPP emulator. When running Tony Hawk Project 8 in PPSSPP after 30 seconds of gameplay It used to drop to 6fps and now it can sustain over 20fps after reaching 71C on a single A57 core. I only saw a maximum battery temperature of 40C and the device wasn't noticeably warmer than it was with the default thermal settings.
probaina said:
It should be safe without the copper shim. The thermal pad it comes with works pretty well. It will still thermal throttle to whatever temperature you set it at so it won't cause any harm.
I've set the Big cluster to a max of 65C and a single A57 core to up to 71C and haven't had any problems yet. I used to get horrible performance with PPSSPP emulator. When running Tony Hawk Project 8 in PPSSPP after 30 seconds of gameplay It used to drop to 6fps and now it can sustain over 20fps after reaching 71C on a single A57 core. I only saw a maximum battery temperature of 40C and the device wasn't noticeably warmer than it was with the default thermal settings.
Click to expand...
Click to collapse
[SS-LITTLE_CLUSTER_management]
algo_type ss
sampling 10000
sensor xo_therm
device cluster0
set_point 52000
set_point_clr 42000
action_type 10000
I should change for example here set_point to 70000? This is how it works?
kutulu32 said:
[SS-LITTLE_CLUSTER_management]
algo_type ss
sampling 10000
sensor xo_therm
device cluster0
set_point 52000
set_point_clr 42000
action_type 10000
I should change for example here set_point to 70000? This is how it works?
Click to expand...
Click to collapse
Well yes. Except that's the little cluster and they don't get that hot normally. It's the big cluster that needs to be modified. I also tuned my display thermals so the screen wouldn't get so dim when the phone gets warm. Here you can look over my configuration if you want.
https://www.dropbox.com/s/1yve5d0m7uin0ga/thermal-engine-8994.conf?dl=0
probaina said:
Well yes. Except that's the little cluster and they don't get that hot normally. It's the big cluster that needs to be modified. I also tuned my display thermals so the screen wouldn't get so dim when the phone gets warm. Here you can look over my configuration if you want.
https://www.dropbox.com/s/1yve5d0m7uin0ga/thermal-engine-8994.conf?dl=0
Click to expand...
Click to collapse
Thanks i will try them!!
your settings somehow "unlocked" my phones cpu. lol in geekbench I found an increase of performance of 200 points in multicore from 4020 I had before maximum , now nearly 4300 .It is impressive. also if I run 6-7 geekbench in a row there is a decrease everytime ex 4200 4050 3900 3600..... but temperature stays 45 degree.
I will test them more later.
http://browser.primatelabs.com/user/73366
Someone try this?
Wysłane z mojego LG-H955 przy użyciu Tapatalka
Other than the two of us?
kutulu32 said:
your settings somehow "unlocked" my phones cpu. lol in geekbench I found an increase of performance of 200 points in multicore from 4020 I had before maximum , now nearly 4300 .It is impressive. also if I run 6-7 geekbench in a row there is a decrease everytime ex 4200 4050 3900 3600..... but temperature stays 45 degree.
I will test them more later.
http://browser.primatelabs.com/user/73366
Click to expand...
Click to collapse
Thanks for sharing your results. That's the highest multi core score I've seen on our phones. I never gotten that high of a multi core score. Glad to help. My configuration also tweaked the battery thermal settings so now you should see faster charge times as well. The default charge rates had really conservative thermal settings and the high speed charge would drop after a while but now it will 2.2 to 2.4 amp charge through the whole charge.
probaina said:
Thanks for sharing your results. That's the highest multi core score I've seen on our phones. I never gotten that high of a multi core score. Glad to help. My configuration also tweaked the battery thermal settings so now you should see faster charge times as well. The default charge rates had really conservative thermal settings and the high speed charge would drop after a while but now it will 2.2 to 2.4 amp charge through the whole charge.
Click to expand...
Click to collapse
Yes indeed i saw a difference in chargin thanks for your effort in the configuration. I am not very fond of benchmarks but i run some in my devices after magor changes (firmware....). This device should have been speedier because of the full hd snapdragon 810 combination. I wonder if we delete the thermal config is the device gonna be speedier? I am waiting for 5.1.1 hoping for smoother rom. Lets hope soneone unlocks the bootloader!!!! I took my precautions disabling MLT lol
probaina said:
Well yes. Except that's the little cluster and they don't get that hot normally. It's the big cluster that needs to be modified. I also tuned my display thermals so the screen wouldn't get so dim when the phone gets warm. Here you can look over my configuration if you want.
https://www.dropbox.com/s/1yve5d0m7uin0ga/thermal-engine-8994.conf?dl=0
Click to expand...
Click to collapse
My phone gets really hot with those settings
I overwrote the original one ^^ has someone made a backup and can share it with me.?
I guess it depends on what you're doing but I probably wouldn't play any 3d games with those settings. Here's a copy of the original one https://www.dropbox.com/s/yb76q6qwanb9ujr/thermal-engine-8994.conf?dl=0
smouker said:
My phone gets really hot with those settings
I overwrote the original one ^^ has someone made a backup and can share it with me.?
Click to expand...
Click to collapse
When you apply the settings you need to give time to the phone to 'absorve' them.
Run a couple of benchmarks, test a 4k video, reboot the phone 3-4 times, close it also.
I havent noticed higher tdmperature of 45 celsius.
kutulu32 said:
When you apply the settings you need to give time to the phone to 'absorve' them.
Run a couple of benchmarks, test a 4k video, reboot the phone 3-4 times, close it also.
I havent noticed higher tdmperature of 45 celsius.
Click to expand...
Click to collapse
I noticed that haha now its fine
kutulu32 said:
Yes indeed i saw a difference in chargin thanks for your effort in the configuration. I am not very fond of benchmarks but i run some in my devices after magor changes (firmware....). This device should have been speedier because of the full hd snapdragon 810 combination. I wonder if we delete the thermal config is the device gonna be speedier? I am waiting for 5.1.1 hoping for smoother rom. Lets hope soneone unlocks the bootloader!!!! I took my precautions disabling MLT lol
Click to expand...
Click to collapse
I'm not sure what would happen if you just deleted the file. Maybe it'll revert to some default, or perhaps it won't thermal throttle at all which would result in auto shut off when it overheats. Probably not worth risking it without a custom recovery in case it doesn't boot.
I have notice that my phone is way quicker now. It was fast before but now it's a beast when I push it hard. Also things like PPSSPP emulator was useless with the default thermal throttling now it can beat my Tegra note 7 with 4 A15 cores at 2.1ghz at it.
Was there a problem with your settings? I noticed your settings you had shared on dropbox are no longer available.
uh60james said:
Was there a problem with your settings? I noticed your settings you had shared on dropbox are no longer available.
Click to expand...
Click to collapse
The folder was deleted for some odd reason. I was able to restore it so the link should work now. Let me know how it works out for you.
A few questions about these settings.
-At the top where you have SS-Little_Cluster_management and SS-Big_Cluster_management is the set point the shutdown temp for the entire cluster?
-I think this one is self explanatory by the action listed but towards the middle where CPUx_MONITOR for each core is, is the threshold the temperature at which the entire phone shuts down?
-I'm not sure I am noticing the difference between SS-CPUx and CPU_HOTPLUG_MONITOR. Could you explain these?
uh60james said:
A few questions about these settings.
-At the top where you have SS-Little_Cluster_management and SS-Big_Cluster_management is the set point the shutdown temp for the entire cluster?
-I think this one is self explanatory by the action listed but towards the middle where CPUx_MONITOR for each core is, is the threshold the temperature at which the entire phone shuts down?
-I'm not sure I am noticing the difference between SS-CPUx and CPU_HOTPLUG_MONITOR. Could you explain these?
Click to expand...
Click to collapse
I don't want to assume I know everything about this. Everything I know about the thermal configuration file I learned from seeing others modify the LG G3 thermal config file. I also learned some by experimenting with my G Flex 2.
In my understanding SS-Little_Cluster_management and SS-Big_Cluster_management is the temperature at which the Cluster will thermal throttle when all cores in the cluster are being used at once. From what I've seen anything with "action_type 10000" means thermal throttle. The closest thing I can think off that works like that is how Intel I5 and I7 will limit turbo speed when more than one core is being used. Except in our case this is to prevent higher speeds when it reaches a certain temperature. So lets say your phone is running some heavy multithreaded app now it's going to follow the rules set in Cluster_management. The default Big Cluster temperature is set to start slowing things down when temperature reaches 48C and to not go back to full speed until the temperature drops down to 38C. One thing I find interesting is that at about 48C cluster temperatures was about where the Big cores would drop to a max of 1.5 ghz. So I'm just guessing that this setting may play a big part on the big cores max speed.
[CPUx_MONITOR] seems to shutdown the phone when the core reaches a certain temperature threshold of 120 C and I assume will not allow it to turn back on until it drops below 115C.
[SS-CPUx] on a big core seems to slow the specific core down when it reaches a temperature threshold of 85C and to not allow it to go to full speed until it drops below 55C. However this rule can be overwritten by [CPUx_HOTPLUG_MONITOR] which can shut down a core even if it hasn't reached it's maximum temperature threshold.
[CPUx_HOTPLUG_MONITOR] just tells the specific core to turn off once it reaches the temperature threshold specified. On the default configuration core 4 and 7 are set to turn off when their temperature goes above 50C. After that core 5 turns off at 58C and even core 6 turns off at 61C. At which point only the small cores will remain on.
I hope that helps somewhat.
The phone is LG G Pro 2 F350L Official Lolipop. Sometime it get very hot and drain battery fast. I put in CPU Stat and it show CPU Usage 50-60% at all time while not in use. Any solution to fix it? How can I check what exact app heat up the CPU?
try to tweak the kernel to lower values using kernel auditor :good:
Where exactly to modify kernel value? What does kernel do? Why would it lower the CPU heat?