Database Info

Let's OC

It's time to Overclock our Phone...
DISCLAIMER: OVERCLOCK IS DANGEROUS FOR OUR PHONES
How to:
1. Now download r151 from Here
2. Put the files of r151 in the root of SD, run HARET.
3. Download SetCPU from Here and install It.
4. Now open SetCPU, And choice "Autodetect Speeds Reccomanded".
5. Allow Root.
6. Press Windows button and choice "Perflock Disabler" and "Attemp to Disable Perflock" and Check "Set on Boot".
7. Now, close the windows and OC our Phone.
My phone under USB and AC run at 825 MHz without Crash, i had tryed to run it at 864 MHz but System Crash everytime. Without USB and AC my phone run at 787 MHz. I Post 2 Images 1. = Normal Clock 2. = 825 MHz Clock.
To Made Benchmark i Use BenchmarkPi.
1. Screen Normal Clock
2. Screen 825MHz
For Other Question:
1. SetCPU
2. -r0bin-'s Post

I did it, it works perferctly !
Upscaled to 825 and min 128
Downscaled to 245 while charging and screen off
Thanks !

doublej4473 said:
I did it, it works perferctly !
Upscaled to 825 and min 128
Downscaled to 245 while charging and screen off
Thanks !
Click to expand...
Click to collapse
My Profiles:
1. Screen Off Min: 19 MHz Max: 245 MHz
2. In Call: Min: 128 MHz Max: 600 MHz
3. Charging AC: Min: 19 MHz Max: 825 MHz
4. Charging USb: Min: 19 MHz Max: 825 MHz
5. Main Profile: Min: 19 MHz Max: 787 MHz
...

Tell me please, does it helps to save the battery in last releace (r163)? I`m asking becouse i try to use Master CPU, and it seems to me that it don`t helps to save energy... But I don`t use profiles, only ondemand settings from 120-600 mHz.
Thanks!

@HTCxxxx
what is the percentage priority by profile?

puxus said:
Tell me please, does it helps to save the battery in last releace (r163)? I`m asking becouse i try to use Master CPU, and it seems to me that it don`t helps to save energy... But I don`t use profiles, only ondemand settings from 120-600 mHz.
Thanks!
Click to expand...
Click to collapse
To PowerSave try 19-480 MHz if Don't need Performance or 19-600 MHz Im Sorry But i Don't Know Master Cpu

doublej4473 said:
@HTCxxxx
what is the percentage priority by profile?
Click to expand...
Click to collapse
In Call is 100
And Screen Off 100 too.

19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.

codiak said:
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
Click to expand...
Click to collapse
Why Unusable??? Yhea, Undervolting can be an Interesting Thing, but i Think if the Volting is too low phone Freeze, and if is too high cpu can have an High temperature if you're stressing cpu and phone can freeze too. But i've noted, when i use a low "screen off" profile battery consumaption is high? why? is a problem of kernel? or is nomal?

codiak said:
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
Click to expand...
Click to collapse
you are right,i also experienced that 19 Mhz makes phone lazy
i'm also agree about 2nd part..i read the same
HTCxxxx said:
Why Unusable??? Yhea, Undervolting can be an Interesting Thing, but i Think if the Volting is too low phone Freeze, and if is too high cpu can have an High temperature if you're stressing cpu and phone can freeze too. But i've noted, when i use a low "screen off" profile battery consumaption is high? why? is a problem of kernel? or is nomal?
Click to expand...
Click to collapse
you don't need to undervolt it too low,you just need to find the right voltage
try last kernel from r0bin and you will not have high battery consumption anymore

Low Mhz does not lead automaticly to low consumtion.
If you phone has something todo (update something for example) it will get the job done faster with high Mhz and is going fastert to sleep after that.
With low Mhz it takes longer and so can have higher consumtion.
On my HD2 I dont use profiles (like screen off) and it has a very low consumtion on standby/sleep.

If you set a minimum speed when screen is off a11 is not able to go to suspend, maybe

just a quick feedback on power consumption:
it never been so good with r167+drain fix without SetCPU
when I set profiles with low frequency (19 or 128Mhz) it keeps on consuming battery up to 100mA. when i switch SetCPU profiles off, i go to 9mA in suspend mode.
true story
there must be a way to setup SetCPU in a way it doesnt affect too much battery drain in suspend mode, but for the time being i just deactivated it.

tzacapaca said:
you are right,i also experienced that 19 Mhz makes phone lazy
i'm also agree about 2nd part..i read the same
you don't need to undervolt it too low,you just need to find the right voltage
try last kernel from r0bin and you will not have high battery consumption anymore
Click to expand...
Click to collapse
yes i see some improvement, and im happy for it...

(I THINK)
Hi All,
I've understood why CPU doesn't run @ 19MHz or @ 128 MHz...
Go to /sys/acpucloclock and look acpuclk_tbl...In It there are write all frequencies CPU can Run:
245760,400000,480000,600000,768000,787200,806400,825600,844800,864000....
but no Under 245 MHz so if You use a Profile for Screen off From 19MHz to 254MHz, cpu Run everytime @ 245MHz...so there is an high consummation of energy
bye

HTCxxxx said:
(I THINK)
Hi All,
I've understood why CPU doesn't run @ 19MHz or @ 128 MHz...
Go to /sys/acpucloclock and look acpuclk_tbl...In It there are write all frequencies CPU can Run:
245760,400000,480000,600000,768000,787200,806400,825600,844800,864000....
but no Under 245 MHz so if You use a Profile for Screen off From 19MHz to 254MHz, cpu Run everytime @ 245MHz...so there is an high consummation of energy
bye
Click to expand...
Click to collapse
hi
as codiak said earlier lowering CPU(underclocking) doesn't have so much impact on battery life..he also explained you why..if you want i will explain you too
explanation:run CPU at low voltage,open an app or downloading an email,etc= CPU will take time to get to the level app needs,display will stay longer while it CPU will get done the job= worse battery life
Undervolting will have impact on battery life
explanation:run same CPU clock at lower Voltage= CPU will use less power=better battery life
hope it's clear enough for you now,and if anyone else thinks i'm wrong feel free to prove me i'm wrong
P.S. Anyway i asked devs and they will lower CPU to run @ less than 245 Mhz.
Enjoy

tzacapaca said:
hi
as codiak said earlier lowering CPU(underclocking) doesn't have so much impact on battery life..he also explained you why..if you want i will explain you too
explanation:run CPU at low voltage,open an app or downloading an email,etc= CPU will take time to get to the level app needs,display will stay longer while it CPU will get done the job= worse battery life
Undervolting will have impact on battery life
explanation:run same CPU clock at lower Voltage= CPU will use less power=better battery life
hope it's clear enough for you now,and if anyone else thinks i'm wrong feel free to prove me i'm wrong
Click to expand...
Click to collapse
Ok thank you very much!!!

[Q] Undervolting - Will it reduce device temp?

Right so my phone can get pretty hot some times and I was just wondering if I undervolt it will it reduce the heat of my phone?
Also how much difference does UV actually show

It can't, because you can undervoltage not much or your phone won't be stable anymore.I think the easier way is to downclock your cpu speed.

likuku said:
It can help in term of technical, but in actually at the rate you can see the different of it.I don't think your phone will still stable or functional.
Click to expand...
Click to collapse
That's really hard to understand what you're trying to say...
Sent from my HTC Sensation 4G using XDA App

likuku said:
It can't, because you can undervoltage not much or your phone won't be stable anymore.I think the easier way is to downclock your cpu speed.
Click to expand...
Click to collapse
Galaxa12 said:
That's really hard to understand what you're trying to say...
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
He means that you can use an app like SetCPU to underclock or lower the clock frequency of your phones CPU, this will leave you a slower but cooler phone.

yes, if you undervolt you reduce cpu "power consuption" as equally as how many volt you decrese.. but.. if you undervolt too much, you lose cpu stability, so, if you undervolt you have to underclock, the same for overclock, if you overclock you may overvolt
it's different for all peoples, some users could have a better cpu (with less impurity), it can be overcloccked better with less overvolt, some can have a bad cpu chip, it means they have to overvolt so much for a little overclock
i have a sensation normally with -75mV undervolt and stock clock, it's stabe, so, am i lucky?

Temperature is a function of voltage + clockspeed. It is recommended you stay at 1.2ghz for good balance b/w performance, temp, and battery consumption.
To easily find your optimal voltage threshold, globally undervolt in stages of 12.5mv until your phone because unstable. Then increase it by 1 stage and that is the optimal voltage your phone should be running at.
Of course you can even go as far as tweak voltages at different clock speeds. Usually there is much more room to UV the lower clocks (192 and 384mhz around 800 or 812.5mv) than the higher clocks.
Hope this helps

iba21 said:
yes, if you undervolt you reduce cpu "power consuption" as equally as how many volt you decrese.. but.. if you undervolt too much, you lose cpu stability, so, if you undervolt you have to underclock, the same for overclock, if you overclock you may overvolt
it's different for all peoples, some users could have a better cpu (with less impurity), it can be overcloccked better with less overvolt, some can have a bad cpu chip, it means they have to overvolt so much for a little overclock
i have a sensation normally with -75mV undervolt and stock clock, it's stabe, so, am i lucky?
Click to expand...
Click to collapse
Getting a Poco x3 pro soon and thinking about undervolting could you add me on discord and help me? If so add Gokn#4488

[Q] CPU Question

Greetings people!
Sorry if this was already asked, but i couldnt find answer anywhere.
i ve rooted nexus 5 (stock kernel, stock rom) and installed trikster mod. I have noticed that minimum and maximum cpu frequencies are changing from time to time. Is this normal?
Thanks!

Hi,
If the min CPU freq changed by itself it could be due to MpDecision (the min CPU freq is increased for smoothness purpose when you touch the screen so when you open Trickster Mod for example for xx ms... plus the specific refresh time of the app to see the real min CPU freq), for the max CPU freq maybe due to thermal throttling at some point (the CPU freq is decreased according to the CPU temperature to avoid damages)...
What is the min CPU freq when it's changed? 1.26 Ghz?
What is the max CPU freq when it's changed? In what situations?

Prezlamen said:
Greetings people!
Sorry if this was already asked, but i couldnt find answer anywhere.
i ve rooted nexus 5 (stock kernel, stock rom) and installed trikster mod. I have noticed that minimum and maximum cpu frequencies are changing from time to time. Is this normal?
Thanks!
Click to expand...
Click to collapse
Yes.

Thermal throttling and hotplug settings

I have been able to fix quite a bit of thermal throttling experienced in multiple benchmark runs by tweaking with the thermal-engine configuration file. With just a few changes and with the copper shim mod I can now run geekbench for as many five times with almost no drop in score. After that I get no thermal throttling in single core but I have it setup to disable two cores after it hits 55C CPU temp in core 4 and 7. I use CPU Z to see actual CPU temp from the sensor readings. Even after 8 Geekbench runs the two cores are still running at full speed and the phone is registering 44C. It's warm but not hot by any means.
If anyone is interested in playing around with it just look for the file in \System\etc\thermal-engine-8994.conf
Most of it is just two adjustments. One for Max temperature at which it will throttle and the one below is the temperature at which throttling stops.

probaina said:
I have been able to fix quite a bit of thermal throttling experienced in multiple benchmark runs by tweaking with the thermal-engine configuration file. With just a few changes and with the copper shim mod I can now run geekbench for as many five times with almost no drop in score. After that I get no thermal throttling in single core but I have it setup to disable two cores after it hits 55C CPU temp in core 4 and 7. I use CPU Z to see actual CPU temp from the sensor readings. Even after 8 Geekbench runs the two cores are still running at full speed and the phone is registering 44C. It's warm but not hot by any means.
If anyone is interested in playing around with it just look for the file in \System\etc\thermal-engine-8994.conf
Most of it is just two adjustments. One for Max temperature at which it will throttle and the one below is the temperature at which throttling stops.
Click to expand...
Click to collapse
Without your copper shim mod have you found any better but safe values we can try?
At least no thermal throttle until 55 celsiius

It should be safe without the copper shim. The thermal pad it comes with works pretty well. It will still thermal throttle to whatever temperature you set it at so it won't cause any harm.
I've set the Big cluster to a max of 65C and a single A57 core to up to 71C and haven't had any problems yet. I used to get horrible performance with PPSSPP emulator. When running Tony Hawk Project 8 in PPSSPP after 30 seconds of gameplay It used to drop to 6fps and now it can sustain over 20fps after reaching 71C on a single A57 core. I only saw a maximum battery temperature of 40C and the device wasn't noticeably warmer than it was with the default thermal settings.

probaina said:
It should be safe without the copper shim. The thermal pad it comes with works pretty well. It will still thermal throttle to whatever temperature you set it at so it won't cause any harm.
I've set the Big cluster to a max of 65C and a single A57 core to up to 71C and haven't had any problems yet. I used to get horrible performance with PPSSPP emulator. When running Tony Hawk Project 8 in PPSSPP after 30 seconds of gameplay It used to drop to 6fps and now it can sustain over 20fps after reaching 71C on a single A57 core. I only saw a maximum battery temperature of 40C and the device wasn't noticeably warmer than it was with the default thermal settings.
Click to expand...
Click to collapse
[SS-LITTLE_CLUSTER_management]
algo_type ss
sampling 10000
sensor xo_therm
device cluster0
set_point 52000
set_point_clr 42000
action_type 10000
I should change for example here set_point to 70000? This is how it works?

kutulu32 said:
[SS-LITTLE_CLUSTER_management]
algo_type ss
sampling 10000
sensor xo_therm
device cluster0
set_point 52000
set_point_clr 42000
action_type 10000
I should change for example here set_point to 70000? This is how it works?
Click to expand...
Click to collapse
Well yes. Except that's the little cluster and they don't get that hot normally. It's the big cluster that needs to be modified. I also tuned my display thermals so the screen wouldn't get so dim when the phone gets warm. Here you can look over my configuration if you want.
https://www.dropbox.com/s/1yve5d0m7uin0ga/thermal-engine-8994.conf?dl=0

probaina said:
Well yes. Except that's the little cluster and they don't get that hot normally. It's the big cluster that needs to be modified. I also tuned my display thermals so the screen wouldn't get so dim when the phone gets warm. Here you can look over my configuration if you want.
https://www.dropbox.com/s/1yve5d0m7uin0ga/thermal-engine-8994.conf?dl=0
Click to expand...
Click to collapse
Thanks i will try them!!

your settings somehow "unlocked" my phones cpu. lol in geekbench I found an increase of performance of 200 points in multicore from 4020 I had before maximum , now nearly 4300 .It is impressive. also if I run 6-7 geekbench in a row there is a decrease everytime ex 4200 4050 3900 3600..... but temperature stays 45 degree.
I will test them more later.
http://browser.primatelabs.com/user/73366

Someone try this?
Wysłane z mojego LG-H955 przy użyciu Tapatalka

Other than the two of us?

kutulu32 said:
your settings somehow "unlocked" my phones cpu. lol in geekbench I found an increase of performance of 200 points in multicore from 4020 I had before maximum , now nearly 4300 .It is impressive. also if I run 6-7 geekbench in a row there is a decrease everytime ex 4200 4050 3900 3600..... but temperature stays 45 degree.
I will test them more later.
http://browser.primatelabs.com/user/73366
Click to expand...
Click to collapse
Thanks for sharing your results. That's the highest multi core score I've seen on our phones. I never gotten that high of a multi core score. Glad to help. My configuration also tweaked the battery thermal settings so now you should see faster charge times as well. The default charge rates had really conservative thermal settings and the high speed charge would drop after a while but now it will 2.2 to 2.4 amp charge through the whole charge.

probaina said:
Thanks for sharing your results. That's the highest multi core score I've seen on our phones. I never gotten that high of a multi core score. Glad to help. My configuration also tweaked the battery thermal settings so now you should see faster charge times as well. The default charge rates had really conservative thermal settings and the high speed charge would drop after a while but now it will 2.2 to 2.4 amp charge through the whole charge.
Click to expand...
Click to collapse
Yes indeed i saw a difference in chargin thanks for your effort in the configuration. I am not very fond of benchmarks but i run some in my devices after magor changes (firmware....). This device should have been speedier because of the full hd snapdragon 810 combination. I wonder if we delete the thermal config is the device gonna be speedier? I am waiting for 5.1.1 hoping for smoother rom. Lets hope soneone unlocks the bootloader!!!! I took my precautions disabling MLT lol

probaina said:
Well yes. Except that's the little cluster and they don't get that hot normally. It's the big cluster that needs to be modified. I also tuned my display thermals so the screen wouldn't get so dim when the phone gets warm. Here you can look over my configuration if you want.
https://www.dropbox.com/s/1yve5d0m7uin0ga/thermal-engine-8994.conf?dl=0
Click to expand...
Click to collapse
My phone gets really hot with those settings
I overwrote the original one ^^ has someone made a backup and can share it with me.?

I guess it depends on what you're doing but I probably wouldn't play any 3d games with those settings. Here's a copy of the original one https://www.dropbox.com/s/yb76q6qwanb9ujr/thermal-engine-8994.conf?dl=0

smouker said:
My phone gets really hot with those settings
I overwrote the original one ^^ has someone made a backup and can share it with me.?
Click to expand...
Click to collapse
When you apply the settings you need to give time to the phone to 'absorve' them.
Run a couple of benchmarks, test a 4k video, reboot the phone 3-4 times, close it also.
I havent noticed higher tdmperature of 45 celsius.

kutulu32 said:
When you apply the settings you need to give time to the phone to 'absorve' them.
Run a couple of benchmarks, test a 4k video, reboot the phone 3-4 times, close it also.
I havent noticed higher tdmperature of 45 celsius.
Click to expand...
Click to collapse
I noticed that haha now its fine

kutulu32 said:
Yes indeed i saw a difference in chargin thanks for your effort in the configuration. I am not very fond of benchmarks but i run some in my devices after magor changes (firmware....). This device should have been speedier because of the full hd snapdragon 810 combination. I wonder if we delete the thermal config is the device gonna be speedier? I am waiting for 5.1.1 hoping for smoother rom. Lets hope soneone unlocks the bootloader!!!! I took my precautions disabling MLT lol
Click to expand...
Click to collapse
I'm not sure what would happen if you just deleted the file. Maybe it'll revert to some default, or perhaps it won't thermal throttle at all which would result in auto shut off when it overheats. Probably not worth risking it without a custom recovery in case it doesn't boot.
I have notice that my phone is way quicker now. It was fast before but now it's a beast when I push it hard. Also things like PPSSPP emulator was useless with the default thermal throttling now it can beat my Tegra note 7 with 4 A15 cores at 2.1ghz at it.

Was there a problem with your settings? I noticed your settings you had shared on dropbox are no longer available.

uh60james said:
Was there a problem with your settings? I noticed your settings you had shared on dropbox are no longer available.
Click to expand...
Click to collapse
The folder was deleted for some odd reason. I was able to restore it so the link should work now. Let me know how it works out for you.

A few questions about these settings.
-At the top where you have SS-Little_Cluster_management and SS-Big_Cluster_management is the set point the shutdown temp for the entire cluster?
-I think this one is self explanatory by the action listed but towards the middle where CPUx_MONITOR for each core is, is the threshold the temperature at which the entire phone shuts down?
-I'm not sure I am noticing the difference between SS-CPUx and CPU_HOTPLUG_MONITOR. Could you explain these?

uh60james said:
A few questions about these settings.
-At the top where you have SS-Little_Cluster_management and SS-Big_Cluster_management is the set point the shutdown temp for the entire cluster?
-I think this one is self explanatory by the action listed but towards the middle where CPUx_MONITOR for each core is, is the threshold the temperature at which the entire phone shuts down?
-I'm not sure I am noticing the difference between SS-CPUx and CPU_HOTPLUG_MONITOR. Could you explain these?
Click to expand...
Click to collapse
I don't want to assume I know everything about this. Everything I know about the thermal configuration file I learned from seeing others modify the LG G3 thermal config file. I also learned some by experimenting with my G Flex 2.
In my understanding SS-Little_Cluster_management and SS-Big_Cluster_management is the temperature at which the Cluster will thermal throttle when all cores in the cluster are being used at once. From what I've seen anything with "action_type 10000" means thermal throttle. The closest thing I can think off that works like that is how Intel I5 and I7 will limit turbo speed when more than one core is being used. Except in our case this is to prevent higher speeds when it reaches a certain temperature. So lets say your phone is running some heavy multithreaded app now it's going to follow the rules set in Cluster_management. The default Big Cluster temperature is set to start slowing things down when temperature reaches 48C and to not go back to full speed until the temperature drops down to 38C. One thing I find interesting is that at about 48C cluster temperatures was about where the Big cores would drop to a max of 1.5 ghz. So I'm just guessing that this setting may play a big part on the big cores max speed.
[CPUx_MONITOR] seems to shutdown the phone when the core reaches a certain temperature threshold of 120 C and I assume will not allow it to turn back on until it drops below 115C.
[SS-CPUx] on a big core seems to slow the specific core down when it reaches a temperature threshold of 85C and to not allow it to go to full speed until it drops below 55C. However this rule can be overwritten by [CPUx_HOTPLUG_MONITOR] which can shut down a core even if it hasn't reached it's maximum temperature threshold.
[CPUx_HOTPLUG_MONITOR] just tells the specific core to turn off once it reaches the temperature threshold specified. On the default configuration core 4 and 7 are set to turn off when their temperature goes above 50C. After that core 5 turns off at 58C and even core 6 turns off at 61C. At which point only the small cores will remain on.
I hope that helps somewhat.

Xperia Z5 gpu undervolting?

Is it possible to implement gpu undervolting into a kernel for the Xperia Z5 I'm looking at you @AndroPlus XD , cpu undervolting is very much possible, it helps reduce heat and increase the lifespan of the chip, so if we can do this on the cpu why not the gpu?

For the Z5 undervolting the gpu isn't necessary.. And I dont recommend doing it either..
The reason being (from my experience and attempts at changing gpu governors and clock speeds)..
I have come across the following scenarios/issues.
1.. Changing the GPU governor from the default governor with 3CToolBox Pro to a different governor force reboots the device instantly and reverts back to default governor settings..
2. Min gpu clock speed is 180Mhz and may is 680Mhz. While playing graphically intense games the gpu barely increased in speed.. It was literally idling at 180Mhz and barely flinched up any higher. Changing the Min speed made no difference in performance.. But from what I remember device still gets hot but not hot enough to cause any concern..
If you're going to undervolt the gpu my advice would be to decrease the maximum gpu speed to like 450 or 510 because as I mentioned above, the gpu speed almost never even increases past minimum that I have noticed when monitoring.. So setting the gpu may speed down 1 or 2 levels would be better and atleast a tad safer incase of sudden voltage / overvoltage spikes..
That's just my 2 cents and friendly advice mate. But I would like to know how you go with this and would love to hear the outcome once you have gone through with the tweak. Let me know how it turns out.
Good luck bro.
Sent from my E6653

TheTecXpert said:
For the Z5 undervolting the gpu isn't necessary.. And I dont recommend doing it either..
The reason being (from my experience and attempts at changing gpu governors and clock speeds)..
I have come across the following scenarios/issues.
1.. Changing the GPU governor from the default governor with 3CToolBox Pro to a different governor force reboots the device instantly and reverts back to default governor settings..
2. Min gpu clock speed is 180Mhz and may is 680Mhz. While playing graphically intense games the gpu barely increased in speed.. It was literally idling at 180Mhz and barely flinched up any higher. Changing the Min speed made no difference in performance.. But from what I remember device still gets hot but not hot enough to cause any concern..
If you're going to undervolt the gpu my advice would be to decrease the maximum gpu speed to like 450 or 510 because as I mentioned above, the gpu speed almost never even increases past minimum that I have noticed when monitoring.. So setting the gpu may speed down 1 or 2 levels would be better and atleast a tad safer incase of sudden voltage / overvoltage spikes..
That's just my 2 cents and friendly advice mate. But I would like to know how you go with this and would love to hear the outcome once you have gone through with the tweak. Let me know how it turns out.
Good luck bro.
Sent from my E6653
Click to expand...
Click to collapse
1. thats because some of the options arent even gpu govenors,
2. im pretty sure xperias newer than 2014 will have something called AVS which stands for auto voltage scaling, im not sure if this is the case with z5 but im no dev so i cant confirm my self.
and the snapdragon 810 is known for a being a cpu that gets hot, i believe the z5 has a newer version with the problem somewhat fixed but that doesnt account for sonys somewhat "meh" method of cooling but atleast its way better than before.

Just leave it on default tbh. Unless you're adamant on undervolting lol
Sent from my E6653