Hey guys, I've had a V30S, and a V35 for the last 2+ years or so. I've tried a few cases, like the Ringke Fusion (smoke black), but in the end the very best one I liked and keep buying is this one (link below) I tend to keep my phone in my pocket a lot, and only take it out when I'm sitting for the most part, so I don't drop my phone often, so I don't want a bulky case, something to protect from scratches and help with grip mainly. This case is slim and minimal profile, so won't give the best drop protection but it's beautiful and functional. Choose V30 under model to get the correct version. The camera bump is a bit low in the cutout, but nothing is covered or obstructed at all. Here's an image of the case in the quote below.
The tempered glass is a UV tempered, so it requires application of a UV glue between the screen and the protector and UV curing. This method prevents the tempered lifting up easily from the curved edges of the screen. I've attached an image of mine in the quote as well to give an idea of fit. This protector covers just about everything that's not covered by this case, but the case won't lift the edges of the protector if the protector is centered correctly. Please note this protector has seen a year of abuse, and has slowly started lifting with bumps and the crack on the top right (hit it against my table couple days ago). When it was new it was perfectly flush without any air bubbles and stayed that way for quite a while. I may replace mine now, if so I'll post a pic with the new protector on once I get around to doing it!
In my humble opinion, this is the hands down best case and screen protector combo around for the V30 or V35.
Here's the link for the case: https://www.ebay.ca/itm/For-LG-G5-G...e-Sandstone-TPU-Skin-Case-Cover-/283300333700
Here's the link for tempered glass: https://www.ebay.ca/itm/For-LG-V30-...red-Glass-Screen-Protector-Film-/143367785688
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Related
Its cheapish and protects the back from scratching. Got one today and fitted it on easy just waiting for 24hours as suggested before I see better results.
From the feel of it, its the soft rubber type plastic.
So far I rate it as ok but I wait and if it dont work first time I have a second protector to try again.
http://cgi.ebay.co.uk/2x-HTC-Touch-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
I bought a full body Invisible shield and used that. Took of the front of the invisileshield because it was too grippy and didn't look as nice. Left the back and buttons with the invisshield and used an exim screen protector.
I have the exim screen protector too the spuc one. Good quality and very very clear. Shame they dont have the back cover protector would of been a better result than the one from ebay, it too is grippy as you say on the back.
So you advice us not to buy one?
Would like to know if it leaves any residue when you remove it?
heres a picture of the back protector, I dont think its fully dried yet but its ok some residue leaks from the edges. I have removed the first one off and washed it with abit of soap and nothing left behind.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main thing it does is protect the back from scratches.
Here is the Screen protector eXim spuc fitted on. Very happy with it as with all my other phones using eXim spuc protectors.
As you can see its pretty much invisible only thing you can tell theres a protector is the top of the screen near the ear piece and the camera.
?????
I bought a Rubbery kind of case from a company called BOXWAVE.com...pretty cool I thought .....and I picked up a pen/laser/stylus too. Haven't got it yet ...but can't wait
Peace
Mike
I got my slip case for my diamond today. The back with the invisible shield makes it hard to pull out, way too grippy. Don't know if I want to keep the invisible shield on at all
Glad to see someone with the exim spuc protectors, they are REALLY GOOD. Had them on my last 3 phones.
Hi all just thought i would give a small review on the SGP Spigen Ultra Oleophobic screen protector, to help any one out there make a decision if this would be good or not for them.
Contents
2 screen protectors
1 squegee
1 cloth
So ill go through the main points:
*Price : I paid $19.95 on eBay ( Australian prices ) this for me was not a large price to pay as ive used their products before and i know the quality that comes with them and what you get for your money. (two screen protectors )
*Ease of install : I found it super easy to install ive done it many time before... but if you guys need help this link will help.
*Once its on how does it fit? : fits great with 2 mm clearance around the front ear speaker and camera also it does not go down the sides... i liked the fact that it did not go down the curved sides because on my gs3 the screen protector would lift on the edge and then dirt would get underneath and make it look really bad.
*How does it feel? : the nexus 4 screen is the smoothest screen I have ever touched so naturally when I put the screen protector on that smoothness decreased not by much but I do feel a small grab every now and then when I my hands perspire or get clammy. Ive also noticed a small grab from the edge of the screen protector when swiping from the side ( but this was to be expexted ).
Other then that feel great.
*How does it look ? : clear , no rainbow , no blue tint , and no deformed spots or dust particles stuck in the screen protector as some cheaper once I had found have.
This is also not a matt screen protector so when in the sun it does mirror a little, but not to much more then what it was without the screen protector.
Another note is you do notice the sides of the screen protector because they dont go all the way to the sides but i would rather this then what i mentioned before.
so now for pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You miss the main point..
how is the oil resisting ability of it?
I have not had any issues with it collecting oil or greese on the screen protector. Sorry sort of missed that part. None issue so I forgot to mention it.
Sent from my Nexus 4 using xda premium
I bought one of these and it was the hardest time I've ever had installing a screen protector. It is just barely wider than the screen so there is no room for error, and once I got it to match up with the screen, it was a little over the edge so it was lifting. I ended up just getting frustrated with it and going naked.
Sent from my Nexus 4 using Tapatalk 2
http://www.ebay.ca/itm/XGear-EXOSki...ll_Phone_PDA_Cases&hash=item4ac2b78b68&_uhb=1
How would I go about putting a screen protector on with this?
noobletsausecakebbq said:
http://www.ebay.ca/itm/XGear-EXOSki...ll_Phone_PDA_Cases&hash=item4ac2b78b68&_uhb=1
How would I go about putting a screen protector on with this?
Click to expand...
Click to collapse
Though I don't know how well it would work, but I would think would need to put the SP first and then the front skin. But I see a problem, if its a dry SP, then it won't go all over the edge. That might cause problems with the fit of the skin itself. Are you dead set on using the front skin?
Oh and don't buy it from there. XGEAR has a 60% off deal on the EXOSkin on their website right now
EDIT: correction, they had the promo for the weekend only. You could still try and see if it works. The code is EXOIPNEX4IPD2
EDIT 2: looks like it expired
AlphaKoi said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just installed mine tonight. Back of it is flawless and so easy to put on. Feels like real wood. The only beef I have is the front side. It does not protect the actual screen of the phone.....so I tried to install it over my BSE clear skin protector. Wasn't the best move (if perfection was what I was going for) because I ended up ripping the thin sides off to make installation over a barely dried wet applied clear skin. Still looks awesome though and I really really like it overall.
If I had to do it over again....I would have installed the front EXOskin over a tempered glass protector for the complete look. The reason the EXOskin didn't play well with the clear skin already on the phone is that the EXOskin is very adhesive. I think it would have been better over something like tempered glass. That would have given it protection over the actual screen and a wood look elsewhere.
Like I stated though....love mine.
Click to expand...
Click to collapse
Quoting myself.....the answer is VERY CAREFULLY. honestly best idea is tempered glass protector for front. Its difficult otherwise and probably not going to come out looking "perfect"
Got my Duzign Brio textured case today. The outside has a rough mild sandpaper like texture. It is easily the "grippiest" case I've ever used. Initial impressions are very good. Everythin lines up perfectly. The cae fits *tight* and doesn't slide around at all. The felt lining inside is nice. My Note2's case got pretty scruffed up inside a case with no felt lining where it slid around inside the case and wore spots on to the phone. The outer lip did slide easily over my screen protector without causing bubbles. Time till tell how the case holds up, or how dirty it will get. Will update the post later once I've owned it a while.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DeoreDX said:
Got my Duzign Brio textured case today. The outside has a rough mild sandpaper like texture. It is easily the "grippiest" case I've ever used. Initial impressions are very good. Everythin lines up perfectly. The cae fits *tight* and doesn't slide around at all. The felt lining inside is nice. My Note2's case got pretty scruffed up inside a case with no felt lining where it slid around inside the case and wore spots on to the phone. The outer lip did slide easily over my screen protector without causing bubbles. Time till tell how the case holds up, or how dirty it will get. Will update the post later once I've owned it a while.
Click to expand...
Click to collapse
I should be receiving mine tomorrow.
I'm currently sporting a Ringke Slim, which is nice but I don't like the lack of the lip covering the screen.
Had the diztronic TPU as well but that case is a bit slippery. Great Pictures. Thanks for the info.
It's a good case. The only complaint would be the texturing isn't as resilient as I'd hoped. I learned the hard way, don't wipe it off with any sort of cleaner. A Clorox wipe removed a large amount of the grip texture from mine.
I bought a Hydrogel Film screen protector about a month after receiving my S10+ about two years ago. I wanted to replace it now with a new one that I purchased off aliexpress. Now, I can't seem to remove the Hydrogel film screen protector on my S10+. Not to mention I don't even notice that its even on there anymore. Theres not even a screen protector outline that you would notice on normal screen protectors. DId some google and found that some comment from quora says that the hydrogel film screen protector is embedded to the glass on your phone and nothing to remove?
How did you guys remove it? or are hydrogel film protectors are not removeable at all once applied?
Peel it off. The bond isn't that great.
Should come off in one piece.
Don't scratch the screen be being stupid using a razor blade etc. Fingernails...
70/30 Isopropyl alcohol may help once you get some of it separated or to clean the glass.
Water may work better.
blackhawk said:
Peel it off. The bond isn't that great.
Should come off in one piece.
Don't scratch the screen be being stupid using a razor blade etc. Fingernails...
70/30 Isopropyl alcohol may help once you get some of it separated or to clean the glass.
Water may work better.
Click to expand...
Click to collapse
No, there is literally nothing that would indicate there is a hydrogel film protector installed on the phone. It looks like the screen is unprotected. But I know 110% that it was installed because I did it myself. There is nothing to peel off, I have literally tried every corner and edge of the screen and near the speaker. I purchased the screen protector here two years agohttps://www.aliexpress.com/item/4000437704322.html?spm=a2g0s.9042311.0.0.27424c4ds7qHH1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well maybe that bad gf did a mind job on you and took it off. WYSIWYG.
No wet apply is that good...
blackhawk said:
Well maybe that bad gf did a mind job on you and took it off. WYSIWYG.
No wet apply is that good...
Click to expand...
Click to collapse
I installed the hydrogel screen protector myself