Its cheapish and protects the back from scratching. Got one today and fitted it on easy just waiting for 24hours as suggested before I see better results.
From the feel of it, its the soft rubber type plastic.
So far I rate it as ok but I wait and if it dont work first time I have a second protector to try again.
http://cgi.ebay.co.uk/2x-HTC-Touch-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
I bought a full body Invisible shield and used that. Took of the front of the invisileshield because it was too grippy and didn't look as nice. Left the back and buttons with the invisshield and used an exim screen protector.
I have the exim screen protector too the spuc one. Good quality and very very clear. Shame they dont have the back cover protector would of been a better result than the one from ebay, it too is grippy as you say on the back.
So you advice us not to buy one?
Would like to know if it leaves any residue when you remove it?
heres a picture of the back protector, I dont think its fully dried yet but its ok some residue leaks from the edges. I have removed the first one off and washed it with abit of soap and nothing left behind.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main thing it does is protect the back from scratches.
Here is the Screen protector eXim spuc fitted on. Very happy with it as with all my other phones using eXim spuc protectors.
As you can see its pretty much invisible only thing you can tell theres a protector is the top of the screen near the ear piece and the camera.
?????
I bought a Rubbery kind of case from a company called BOXWAVE.com...pretty cool I thought .....and I picked up a pen/laser/stylus too. Haven't got it yet ...but can't wait
Peace
Mike
I got my slip case for my diamond today. The back with the invisible shield makes it hard to pull out, way too grippy. Don't know if I want to keep the invisible shield on at all
Glad to see someone with the exim spuc protectors, they are REALLY GOOD. Had them on my last 3 phones.
Related
So i went and bought a couple of cases after destroying my first GS4, i had the Incipio Dual Pro on my phone from sprint http://shop.sprint.com/mysprint/shop/accessory/ao_details.jsp?accSKU=74100061&accCatId=acc9003cat
& it didn't do nothing, basically my 7 month old daughter got a hold of my phone, tried to eat it and then chuck it at the wall.
My LCD had a fine crack and then it started to bleed, i was using a body glove(http://shop.sprint.com/mysprint/shop/accessory/ao_details.jsp?accSKU=74100052&accCatId=acc9003cat) at the time i dropped it off getting out of my car and that took the screen out.
long story short, i found myself a screen for really cheap and replaced it and went and bought a couple of new cases, i figure i review them and maybe find a new cool case i haven't come across.
So here is my GS4 i put Invisibleshield Extreme on my phone, not really happy with it since i thought it would be Anti-Glare and Fingerprint resistant, its not, i got the screen protector for free so i can't really complain, but i am going to anyways!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bought myself a UAG AERO(i had UAG on my note 2, but was looking to try new things & it didn't work out too well)
so far my favorite case for everyday use out of everything, its really light, grip is good and really protects from everyday drop and use.
Also went and bought a Dualtek, use this case anytime im working in shop, outside or when running, this case is great, i threw it down couple of stairs by mistake and phone had no damage, my only issue is that it make the phone feel heavy and big compared to UAG AERO.
see pics and let me know what you think!
First of all, nice review and nice picture.
I have few concerns and question about DualTek case, how do you feel about the button - are they easy to push? and how is the side bumper - does they collect lint/dust easily?
Thanks for taking time to look and reply.
I read the dualtek will eventually leave marks on the GS4's backcover from the rubber lining on the inside.
Is that Zagg protector a dry or wet install? The ones I know of are wet installs.
Sent from my SGH-I337M using Tapatalk 4 Beta
http://www.ebay.ca/itm/XGear-EXOSki...ll_Phone_PDA_Cases&hash=item4ac2b78b68&_uhb=1
How would I go about putting a screen protector on with this?
noobletsausecakebbq said:
http://www.ebay.ca/itm/XGear-EXOSki...ll_Phone_PDA_Cases&hash=item4ac2b78b68&_uhb=1
How would I go about putting a screen protector on with this?
Click to expand...
Click to collapse
Though I don't know how well it would work, but I would think would need to put the SP first and then the front skin. But I see a problem, if its a dry SP, then it won't go all over the edge. That might cause problems with the fit of the skin itself. Are you dead set on using the front skin?
Oh and don't buy it from there. XGEAR has a 60% off deal on the EXOSkin on their website right now
EDIT: correction, they had the promo for the weekend only. You could still try and see if it works. The code is EXOIPNEX4IPD2
EDIT 2: looks like it expired
AlphaKoi said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just installed mine tonight. Back of it is flawless and so easy to put on. Feels like real wood. The only beef I have is the front side. It does not protect the actual screen of the phone.....so I tried to install it over my BSE clear skin protector. Wasn't the best move (if perfection was what I was going for) because I ended up ripping the thin sides off to make installation over a barely dried wet applied clear skin. Still looks awesome though and I really really like it overall.
If I had to do it over again....I would have installed the front EXOskin over a tempered glass protector for the complete look. The reason the EXOskin didn't play well with the clear skin already on the phone is that the EXOskin is very adhesive. I think it would have been better over something like tempered glass. That would have given it protection over the actual screen and a wood look elsewhere.
Like I stated though....love mine.
Click to expand...
Click to collapse
Quoting myself.....the answer is VERY CAREFULLY. honestly best idea is tempered glass protector for front. Its difficult otherwise and probably not going to come out looking "perfect"
Wassup guys just a little review. Got my 1st case in today. Wish i had the phone to go inside it. 2 part case.
1st impressions....very nice case. Great feel to it. Light and comfortable. May be a little slippery but not too bad. Sides do offer some grip tho with rubberish material. Great finish on it with the coral blue. Kick stand feels decent stays in place when open and snaps back closed when needed. Button press seems like it will be fine but cant tell until phine arrives. Over all protection id rate 6 out of 10.
1 of the things i noticed first was how thin the case was. This is not a bad thing. Im comming from a note 4 with a verus thor case and can fit the new case almost inside the verus thor note 4 case. This is good relating to actual phone size. My note 4 was slightly too large to properly hold it in my hand. This seems like it will be nearly perfect for me.
2 things im worried about.....when the phone is in the case and face down im hoping it leaves a gap between the surface and screen. I believe it does but again i need my phone to tell.
2 inner part of kickstand. Im worried about it somehow scratching the back glass of the phone. Anyone know where to get a rear body plastic protector?
Check out some pics. Hope this helps.
Nice. I was checking those out. I bought 5 Thors for my N4 at $3 each. Waiting for that sale again from Verus. Bring on the N7!
Buy a premium metal glass phone and put it into a plastic rubber case breaks my heart. Waiting for the drop tests if it's durable I will add skin on the back to only remove those finger prints and make the phone less slippery. Maybe some mental frame would be cool too, but then phone becomes more bullky.
I got the VRS TPU case. Looks pretty awesome so far!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920V using XDA-Developers mobile app
Hey guys, I've had a V30S, and a V35 for the last 2+ years or so. I've tried a few cases, like the Ringke Fusion (smoke black), but in the end the very best one I liked and keep buying is this one (link below) I tend to keep my phone in my pocket a lot, and only take it out when I'm sitting for the most part, so I don't drop my phone often, so I don't want a bulky case, something to protect from scratches and help with grip mainly. This case is slim and minimal profile, so won't give the best drop protection but it's beautiful and functional. Choose V30 under model to get the correct version. The camera bump is a bit low in the cutout, but nothing is covered or obstructed at all. Here's an image of the case in the quote below.
The tempered glass is a UV tempered, so it requires application of a UV glue between the screen and the protector and UV curing. This method prevents the tempered lifting up easily from the curved edges of the screen. I've attached an image of mine in the quote as well to give an idea of fit. This protector covers just about everything that's not covered by this case, but the case won't lift the edges of the protector if the protector is centered correctly. Please note this protector has seen a year of abuse, and has slowly started lifting with bumps and the crack on the top right (hit it against my table couple days ago). When it was new it was perfectly flush without any air bubbles and stayed that way for quite a while. I may replace mine now, if so I'll post a pic with the new protector on once I get around to doing it!
In my humble opinion, this is the hands down best case and screen protector combo around for the V30 or V35.
Here's the link for the case: https://www.ebay.ca/itm/For-LG-G5-G...e-Sandstone-TPU-Skin-Case-Cover-/283300333700
Here's the link for tempered glass: https://www.ebay.ca/itm/For-LG-V30-...red-Glass-Screen-Protector-Film-/143367785688
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
I bought a Hydrogel Film screen protector about a month after receiving my S10+ about two years ago. I wanted to replace it now with a new one that I purchased off aliexpress. Now, I can't seem to remove the Hydrogel film screen protector on my S10+. Not to mention I don't even notice that its even on there anymore. Theres not even a screen protector outline that you would notice on normal screen protectors. DId some google and found that some comment from quora says that the hydrogel film screen protector is embedded to the glass on your phone and nothing to remove?
How did you guys remove it? or are hydrogel film protectors are not removeable at all once applied?
Peel it off. The bond isn't that great.
Should come off in one piece.
Don't scratch the screen be being stupid using a razor blade etc. Fingernails...
70/30 Isopropyl alcohol may help once you get some of it separated or to clean the glass.
Water may work better.
blackhawk said:
Peel it off. The bond isn't that great.
Should come off in one piece.
Don't scratch the screen be being stupid using a razor blade etc. Fingernails...
70/30 Isopropyl alcohol may help once you get some of it separated or to clean the glass.
Water may work better.
Click to expand...
Click to collapse
No, there is literally nothing that would indicate there is a hydrogel film protector installed on the phone. It looks like the screen is unprotected. But I know 110% that it was installed because I did it myself. There is nothing to peel off, I have literally tried every corner and edge of the screen and near the speaker. I purchased the screen protector here two years agohttps://www.aliexpress.com/item/4000437704322.html?spm=a2g0s.9042311.0.0.27424c4ds7qHH1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well maybe that bad gf did a mind job on you and took it off. WYSIWYG.
No wet apply is that good...
blackhawk said:
Well maybe that bad gf did a mind job on you and took it off. WYSIWYG.
No wet apply is that good...
Click to expand...
Click to collapse
I installed the hydrogel screen protector myself