Hello,
maybe somebody can help me.
To the radio:
PX6, Hal9k v4.0.2 Android 9, DSP, MCU GS 3.40, 9 inch in the BMW e46
Following problem:
Launcher and apps do not run smoothly.
Tried solutions:
New motherboard installed
New coreboard installed
New firmware installed
New Hal9k v4.0.2 installed
Problem still exists.
I have the same issue. especially with google maps. it's laggy; typing feels like using my old 'Galaxy S'.
mahtew said:
I have the same issue. especially with google maps. it's laggy; typing feels like using my old 'Galaxy S'.
Click to expand...
Click to collapse
That's right.
I also see this especially with the I-Bus App.
But only as soon as graphics are in play.
Also in the normal launcher.
But as soon as you are in the settings, everything goes smoothly.
As soon as a graphic is shown again, it stops again.
I have the same issue too. is there any solution?
problem in the Google app. Turn the Google app back to the old version. don't update again.
CPH1941 cihazımdan Tapatalk kullanılarak gönderildi
the px6 has Dual cortex-a72 + Quad cortex-a53 on it´s Board.
This is a Chipset introduced in 2016. Antutu Benchmark should be around 70k - 80k Points. This is very slow, so i think it´s would be Time for Chinese Factorys building new Android Radios with newer Chipsets...
A fix:
Maps is a notoriously heavy app. But the reason it lags on px6 is more than that alone. You can make it nearly lag-free through 2 changes:
1. Use the 32-bit (armeabi-v7a) nodpi apk. The rk3399 supports 64 bit (arm64-v8a) but it runs substantially slower to the 32-bit of the same release for some reason.
2. Downgrade a bit. How much you're willing to Downgrade is dependent on your preference, but the older releases all still work. Unfortunately I like the new versions more so I only rolled back to 10.55.2, but even that alone was a significant improvement over the latest release.
I'm disappointed that this is a problem when my $100 Umidigi phone can run maps more smoothly that the $350 head unit, but these two options make it good enough.
Also a note for Spotify PX6 users: use Tasker/Automate to emulate a touch on the album art every time the app is started to effectively start it in player mode instead of browsing.
BMW6Cylinder said:
Hello,
maybe somebody can help me.
To the radio:
PX6, Hal9k v4.0.2 Android 9, DSP, MCU GS 3.40, 9 inch in the BMW e46
Following problem:
Launcher and apps do not run smoothly.
Tried solutions:
New motherboard installed
New coreboard installed
New firmware installed
New Hal9k v4.0.2 installed
Problem still exists.
Click to expand...
Click to collapse
No issue with maps on PX5 with sink/fan on Hal3/ Android 8.1, torque and Spotify all running. Have you checked for CPU thermal throttling?
Also, I have kernel auditior setting performance governor at boot.
Related
Just bought and installed this 2-DIN headunit! So awesome to finally have Android in the dash. So far it seems great.
LIKES:
Multi-touch is a nice touch
Able to install my own apks without connecting to the Play Store
Finally get to use Live Wallpapers without worrying about battery drain
Customizability
Built in fan
DISLIKES:
Start up time kinda sucks
Wifi seems to trip out when downloading via phone tether
Ipod icon in the dock (how clueless is that?? Android and Apple aren't friends)
*Actually to be honest, I kinda understand it. A lot of people use their ipods/iphones to listen to their music. My major gripe about this though is that- I CAN'T GET RID OF IT! I don't want an Ipod app on my Android. I would like to figure out how to get rid of it. I'd much rather put my bluetooth icon in the doc.
So far I've installed Skype, Space Colony Live Wallpaper, Maps With Me, and RecForge Lite. I haven't tried TB or Root Explorer yet, as I don't have root access (yet!). It comes preinstalled with Gmail, Email, Angry Birds Rio, Radio (the FM Radio app), EZ File Explorer and several other apps. It runs really smooth for the most part.
Anyone else have this unit yet? Anyone tried rooting it yet? Please share your experience in this thread.
Just for reference, the stock system versions are as follows:
CPU Information
Freescale i.MX53
RAM Information
512M DDR3 800
Android Version
2.3.7
MCU Version
2.10.9-1-10-1
System Version
2.20.21
DVD Version
2.13.11-1200wb
What is interesting is I was able to access my root directory and files without rooting my device. However, when I checked with Root Checker Basic, it said my device was not rooted. And I'm unable to mount R/W. I was able to copy the system/app folder with no problem though. Is this typical of non-rooted devices?
shunsai said:
Just for reference, the stock system versions are as follows:
CPU Information
Freescale i.MX53
RAM Information
512M DDR3 800
Android Version
2.3.7
MCU Version
2.10.9-1-10-1
System Version
2.20.21
DVD Version
2.13.11-1200wb
What is interesting is I was able to access my root directory and files without rooting my device. However, when I checked with Root Checker Basic, it said my device was not rooted. And I'm unable to mount R/W. I was able to copy the system/app folder with no problem though. Is this typical of non-rooted devices?
Click to expand...
Click to collapse
How is the unit so far? I just bought one from ebay.
ricrick said:
How is the unit so far? I just bought one from ebay.
Click to expand...
Click to collapse
So far I'm pretty happy with it. The start-up time is a little slow, but other than that, it does pretty much everything I want it to do. I was able to install a different launcher that's more customizable and more to my taste. I've been able to connect to internet and Gmail and the playstore without any problem. I haven't had any problem installing apps (except for when I was intentionally trying to install apps that I knew wouldn't work... ie. Samsung apps). No major complaints. Overall a great purchase!
shunsai said:
So far I'm pretty happy with it. The start-up time is a little slow, but other than that, it does pretty much everything I want it to do. I was able to install a different launcher that's more customizable and more to my taste. I've been able to connect to internet and Gmail and the playstore without any problem. I haven't had any problem installing apps (except for when I was intentionally trying to install apps that I knew wouldn't work... ie. Samsung apps). No major complaints. Overall a great purchase!
Click to expand...
Click to collapse
When you say start up time, do you need to shut the device off when u leave the car, or can you put it in stand by mode?
ricrick said:
When you say start up time, do you need to shut the device off when u leave the car, or can you put it in stand by mode?
Click to expand...
Click to collapse
Yup, it shuts down everytime you take the key out of the ignition. There is no standby or hibernate mode.
I just purchased this unit off Newegg and I'm really looking forward to seeing what it can do. I was curious if you ever got root access worked out? I would love to see this get some more attention from devs and really show what android in-dash is capable of!
monk2413 said:
I just purchased this unit off Newegg and I'm really looking forward to seeing what it can do. I was curious if you ever got root access worked out? I would love to see this get some more attention from devs and really show what android in-dash is capable of!
Click to expand...
Click to collapse
Got mine installed few days ago. So far so good. Boot time is around 45sec, not a really big problem for me as i do drive more then one min every trip. The default audio player sucks. The unit always runs the default player automatically at the beginning. Every time you have to stop the music b4 you switch to other player. Kinda annoying.
question
I bought the same model XTRONS. I have a question I have downloaded the launcher? Is there any other Bluetooth dial? Because the original is dramatic.
Regards Grezgorz
Xtrons tda620 tda610
greekrol said:
I bought the same model XTRONS. I have a question I have downloaded the launcher? Is there any other Bluetooth dial? Because the original is dramatic.
Regards Grezgorz
Click to expand...
Click to collapse
Hi! I am used XTRONS model TDA-610A. The characteristics of 620 similar to 610. Then you can refer to the section "OUKU - Unbranded 6.2" 2 DIN Android Car Stereo Radio Head UNIT "These receivers are the same.
Hi
anyone manage to update firmware or root this unit? thinking of getting one.
Hi Guys,
I´m ( and many PX5 users too very interestest on a tool like "RK3066 Headunit" or "S.D.V.C." (unfortunately Android 4.4 / 5.1.1 only) which enable (GPS-) speed depend volume change for Android 6 / PX5 users.
All tools i´ve tested are not working
Can somebody please programming a SDVC-tool? I (and certainly many others) would donate for it!
A program that can handle input of a basic formula for non linear progression. Something that modifies the volume so the volume does not revert back to the unmodified level when a volume button is pressed. -Thats annoying.
Something like that is also really needed for PX3
hyperkick said:
A program that can handle input of a basic formula for non linear progression. Something that modifies the volume so the volume does not revert back to the unmodified level when a volume button is pressed. -Thats annoying.
Something like that is also really needed for PX3
Click to expand...
Click to collapse
You're absolutely right. A disadvantage of the existing px3 tools is, that the volume level jumps back to the level before the volume was changed from sdvc tool. That sucks.
There should be the possibility to change the volume absolute / global / permanently, rather than relative / temporary. The frontpanel volume control / buttons do nothing else.
Better yet, it would be nice for the volume to be integrated with the rest of android so existing SDVC apps work as well as speech recognition. Presently when I say 'OK Google... turn up the volume' some volume setting is changed, but it doesn't actually change the volume through these units
Hello to all, guys I also need to raise and decrease the volume according to the speed! I've tried all the applications on the play store "Gala and Automatik sdvc" but no one works! We need a developer who creates a tool for Px5. We hope someone listen to us.
The developer of GALA has the intention on creating the update for px5, buy he needs the commands for volume up and down that the headunit manages. Anybody?
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
The developer of GALA has the intention on creating the update for px5, buy he needs the commands for volume up and down that the headunit manages. Anybody?
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
All need command informations can be found on source code base here: https://github.com/f1xpl/MtcdAutoVolume
BTW: MtcdAutoVolume is currently unusable because it controls to absolute volume levels (instead of relative).
News from "MyMTCService" with (promised working) PX5 SDVC Support
New Release 0.7.2:
■ Bug Fix for PX5
1) MUTE / Volume function works now!!
2) MCU version can display normally..
3) Fixed a bug where the Favorites screen popped up at boot time
4) button mapping function works now!!
5) brightness control works now!!
■ Music RemoteControll
Link: https://play.google.com/store/apps/details?id=rabbity.com.service&hl=de
I will test it this afternonn. Hopefully it works!
Since yesterday "myMTCService 0.7.2" is running on my PX5-HU with Malaysk V2 ROM...and now it is the first tool with a good working SDVC section!
All other avaiable GALA/SDVC-Tools i´ve tested are currently useless or do not working on PX5 Systems.
Congratulations and big thanks to "rabbity417" for his aswome work! :good:
diefem said:
Since yesterday "myMTCService 0.7.2" is running on my PX5-HU with Malaysk V2 ROM...and now it is the first tool with a good working SDVC section!
All other avaiable GALA/SDVC-Tools i´ve tested are currently useless or do not working on PX5 Systems.
Congratulations and big thanks to "rabbity417" for his aswome work! :good:
Click to expand...
Click to collapse
I tried to install this on Malaysk v3, but when I run it the launcher keeps crashing, so it's not usable. After restarting the HU the launcher worked again. I uninstalled the service. Any suggestions?
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
A few weeks ago I tried the version 0.7.2 of MyMtc Service that free. Initially it worked but after a few days the volume changes had no effect. Now version 0.7.4 is released but I have not tried it yet. How does it work for you? Ask me a question: What's the difference between the free and the donate version?
bettuccio said:
A few weeks ago I tried the version 0.7.2 of MyMtc Service that free. Initially it worked but after a few days the volume changes had no effect. Now version 0.7.4 is released but I have not tried it yet. How does it work for you? Ask me a question: What's the difference between the free and the donate version?
Click to expand...
Click to collapse
"myMTCService 0.7.2" is running very well on my PX5-HU with Malaysk V2 since i use it (2 weeks now)
There is no difference in functionality between the free and the donate version. Donate version (more like a pay version) handles the "donate-money" comfortable with the google pay system.
I will try 0.7.4 on Malaysk V2 today.
JohanEe said:
I tried to install this on Malaysk v3, but when I run it the launcher keeps crashing, so it's not usable. After restarting the HU the launcher worked again. I uninstalled the service. Any suggestions?
Johan
Verstuurd vanaf mijn SM-T580 met Tapatalk
Click to expand...
Click to collapse
Try the new Version 0.7.4. The Bug Fix on PX5 (Fix issues that reboot) maybe helps to get the tool running on your system. The Tool owner rabbity417 seems very interestet to make the tool more stable for the PX5 platform. He releases fast new versions.
Revision Info myMTC Service (copied from Goole Play Store):
v0.7.4
■ Bug Fix on PX5
1. Fix issues that reboot
-----------------
v0.7.3
■ Add Features and enhancements
1. Accessibility enable (especially on PX5)
2. Fixed automatic switching of front camera
3. Add Toggle function
4. Added OBD connection function (function in xposed-mtc-manager)
=> Thank you MVG-V70.
5. Improved A2DP handle remote control
=> Fixed a problem that was controlled simultaneously with all-in-one music app.
■ Music RemoteControll
1. More faster remote controll.
diefem said:
"myMTCService 0.7.2" is running very well on my PX5-HU with Malaysk V2 since i use it (2 weeks now)
There is no difference in functionality between the free and the donate version. Donate version (more like a pay version) handles the "donate-money" comfortable with the google pay system.
I will try 0.7.4 on Malaysk V2 today.
Click to expand...
Click to collapse
OK, thanks a friend. I will try version 0.7.4.
Anyone else have to restart the service after every standby period?
(on PX3 malaysk)
Yes. Same to me.
Send from D6603 with Tapatalk
hyperkick said:
Anyone else have to restart the service after every standby period?
(on PX3 malaysk)
Click to expand...
Click to collapse
Same here. 0.7.4 service stopps after standby. I have tried using Malaysk V3 for PX5 with CarSleepRun to keep alive the service ( added all listed - i guess - 7 mtc_services).
But did not work. The Screen Overlay Bug in Malaysk V3 is also annoying. No more experiments.
Now I am back on the well running 0.7.2 and Malaysk V2, where the mtc service is not stopped after standby
myMTC service 0.7.2 apk :
https://apkpure.com/rockchip-mymtcs...20uc2VydmljZV8xMF9jNGFkNDIyYg&version_code=10
Screen overlay was caused by the app "twilight" in my case. Deactivate and the bug is gone.
[email protected] said:
Screen overlay was caused by the app "twilight" in my case. Deactivate and the bug is gone.
Click to expand...
Click to collapse
Thank you for sharing your experience!
Off Topic: But I wonder how such a massive problem with Twilight in the release version could remain unrecognized.
Thats not a massive problem. It´s a feature
In the twilight description there you find the text to deactivate to install.
Use the app on my mobile too. for installing something i scroll down the statusbar and stop twilight service.
Hi, i've an extremely slow A-MEDIA Auto (1024x600 S), 1GB Ram, Cortex A9 in my Mercedes..i can't even use Spotify or Amazon Music...too slow to load.
Android version is something like 5.1. Is there a very light rom to use to upgrade my android head unit?
I don't want to brick it....My only need is to use Spotify and keep the functionality of the rear cam. Thanks a lot.
same HERE
i need upgrade too
I add some more info...i don't know if I can upgrade with malaysk Rom
Versione MCU：
MTCD_KD_V1.82_1
Aug 26 2016 09:28:58
Versione di Android：
5.1.1
Versione kernel：
3.0.101+
[email protected] #66
Fri Sep 2 16:07:39 CST 2016
Numero build：
rk3188-userdebug 05092016.18:26:56
This might be what your looking for, I would look into getting Hal9k ROM instead of Malaysk roms due to the use of xposed which will probably slow it down again. Hal9k still has customization's over the stock but doesnt have xposed.
https://forum.xda-developers.com/an...lopment/rom-malaysk-roms-mtcd-device-t3385309
https://forum.xda-developers.com/an...opment/rom-hal9k-mod-mtcd-head-units-t3623982
https://forum.xda-developers.com/an...rom-hal9k-mod-2-mtcd-mtce-head-units-t3741583
you are also running on an old MCU version, today i have updated mine from MTCD_KSP v2.09_1 to MTCE_KSP v2.89_c1 and at first glance it seems to improve performance.
Hi! I'm here again....I didn't upgrade because I see that the app A2DP app (already installed in my a media car audio) solves my problem in a fast and fantastic way : I installed Amazon Music in my cell, connected via bluetooth with the MTCD unit and then i can play all the song I want using the cell and listening with my car sound systems. Everything is fast and i can then bypass the slow mtcd problem.
maranric said:
Hi, i've an extremely slow A-MEDIA Auto (1024x600 S), 1GB Ram, Cortex A9 in my Mercedes..i can't even use Spotify or Amazon Music...too slow to load.
Android version is something like 5.1. Is there a very light rom to use to upgrade my android head unit?
I don't want to brick it....My only need is to use Spotify and keep the functionality of the rear cam. Thanks a lot.
Click to expand...
Click to collapse
Hi. I just read your post. I have the same device here. It's extremely slow. I got to my car, engine is on and until I get GoogleMaps working it takes almost forever. Delays and all these. Until I'm able to input street's name or whatever.
Did you solve the problem? I'm thinking how exactly I could install new ROM or whatever on this device. I'm not an expert, far away from it. Is there a really good tutorial (video maybe) how to install something new (when the device is already in the car) for noobs like me?
I'd appreciate it very much! Thanks and peace!
Just a short question about this unit: Does anybody kno the selling name of the radio? Starts with ES
Thanks a lot
A-Media Auto (1024x600)
Hi I have a A-media Auto (1040x60) with a 40gb attached. I’ve plugged in a 120gb SDD & it doesn’t automatically pick it up like the 40gb. You have to manually find the storage & click on what you want & it doesn’t pick up where you left off if you turn off the ignition. Frustrating, any help would be grateful.
Hello guys
Does anybody know if on the head unit A-MEDIA AUTO 1024x600 Android version 6.0.1 - MTVF-KGL-V2.6.0.1
It is possible to fit the reversing camera and which model could be suitable?
I have bought WiFi between the camera and the front unit but I don’t know if I can fit and in case which connector to plug?
Thanks a lot.
Robbie
Studiopatalacci said:
Hello guys
Does anybody know if on the head unit A-MEDIA AUTO 1024x600 Android version 6.0.1 - MTVF-KGL-V2.6.0.1
It is possible to fit the reversing camera and which model could be suitable?
I have bought WiFi between the camera and the front unit but I don’t know if I can fit and in case which connector to plug?
Thanks a lot.
Robbie
Click to expand...
Click to collapse
Hi, how to update mcu firmare (how to know which one I need and where to find it). Thanks
I just found new kind of devices on Joyings website and did not yet find any posts about it.
The Android 8.1 based devices are again Intel based, no Rockchip PX5 anymore.
CPU: Intel Airmont eight-core 1.8GHz SC9853i
RAM: LPDDR4 4GB
Flash: Samsung 32GB
Several display sizes are available, all still with the known 1024x600 resolution.
The CPU is an outcome of a cooperation by Intel and Speadtrum (see https://www.anandtech.com/show/12592/intels-last-atom-in-smartphones-a-2018-benchmark),
and another Atom 64-bit architecture spinoff (see https://en.wikichip.org/wiki/intel/microarchitectures/airmont).
The GPU is a dual core Arm Mali-T820 GPU.
Anyone that had a chance to get hands on such a device and could make a comparision to the current PX5 based devices?
EDITs:
How to root: https://forum.xda-developers.com/an.../howto-root-joying-sc9853i-head-unit-t3915530
Just picked this unit up last week. my first Android Head unit. cant compare it to any other units.
The thread about the new DSP units is also from users having such a new Intel model
surfer63 said:
The thread about the new DSP units is also from users having such a new Intel model
Click to expand...
Click to collapse
Ah yes, thanks, got it: https://forum.xda-developers.com/an...ing-finally-head-unit-digital-output-t3891087
I did not notice this because they all talk about SPDIF or not I am not so much of an audio enthusiast...
realzoulou said:
Ah yes, thanks, got it: https://forum.xda-developers.com/an...ing-finally-head-unit-digital-output-t3891087
I did not notice this because they all talk about SPDIF or not I am not so much of an audio enthusiast...
Click to expand...
Click to collapse
Neither am I.
This CPU is at least 30% faster then PX5/PX6. Is 14nm technology.
Thats very promising. Anybody know if Android Auto would work for phones running pie? So sad i can't get that workon my old intel sofia.
juandhi said:
Thats very promising. Anybody know if Android Auto would work for phones running pie? So sad i can't get that workon my old intel sofia.
Click to expand...
Click to collapse
No Android Auto does not work. At least the way its supposed to. You can install it on the unit if you have WiFi tether, but that defeats the point. Also the EasyConnected app will not work. Joying said that they were working on getting Android Auto working, so maybe in the next update.
My wife has a PX5 and I had the SoFIA model. This one is much faster. It still has problems like the WiFi randomly disconnecting and reconnecting. Only 1 SD card slot and it has randomly disconnected at times as well.
deedeebulldog said:
No Android Auto does not work. At least the way its supposed to. You can install it on the unit if you have WiFi tether, but that defeats the point. Also the EasyConnected app will not work. Joying said that they were working on getting Android Auto working, so maybe in the next update.
My wife has a PX5 and I had the SoFIA model. This one is much faster. It still has problems like the WiFi randomly disconnecting and reconnecting. Only 1 SD card slot and it has randomly disconnected at times as well.
Click to expand...
Click to collapse
Have you tried Headunit Reloaded? It's an Android Auto emulator for headunits
millab said:
Have you tried Headunit Reloaded? It's an Android Auto emulator for headunits
Click to expand...
Click to collapse
No. I will give it a try and see.
How's the screen quality? Daylight brightness and viewing angles okay?
millab said:
Have you tried Headunit Reloaded? It's an Android Auto emulator for headunits
Click to expand...
Click to collapse
Yes Headunit Reloaded worked-ish. I cand get it to work with USB, but it seemed to always fail with WiFi direct. I will play around with it more, but so far it looks good.
juandhi said:
Thats very promising. Anybody know if Android Auto would work for phones running pie? So sad i can't get that workon my old intel sofia.
Click to expand...
Click to collapse
Joying have their own app to work with android auto and apple play, it is called ZLINK, it works with 8.1, but I am not sure about pie, since not many phone are running pie.
Maye you can ask them and let us know.
Hello
strange, i cannot install PowerAmp v3 (only v2 is available). I cannot understant, v3 is working with Android 8.1, so the CPU is not supported?
fabien_m2002 said:
Hello
strange, i cannot install PowerAmp v3 (only v2 is available). I cannot understant, v3 is working with Android 8.1, so the CPU is not supported?
Click to expand...
Click to collapse
I was faced with this issue as well. The play store would only show Poweramp v2 so I searched the Poweramp forums and it turns out that Intel (x86) hardware is only supported by v2 and support was dropped in v3 and would only support ARM hardware.
However, I posted a question on the forum which you can see here: https://forum.powerampapp.com/topic/16541-intel-based-car-head-unit/ and as you can see I have got it working although I'm still not sure why.
In summary, just uninstall v2, download the v3 apk from here https://powerampapp.com/download-poweramp/ and install it and it should run fine. Then just install the unlocker from the play store as normal (assuming you have the paid version) and it works fine. I'm now running Poweramp v3 on my Intel based Joying unit with no issues whatsoever. Just remember to turn off auto update for Poweramp in the play store otherwise I think it will 'upgrade' it to v2 again.
As I said though, I really don't know how it's working as others have said that they cannot get it to run at all on other Intel based hardware.
Hope this works for you.
Russell_S said:
I was faced with this issue as well. The play store would only show Poweramp v2 so I searched the Poweramp forums and it turns out that Intel (x86) hardware is only supported by v2 and support was dropped in v3 and would only support ARM hardware.
However, I posted a question on the forum which you can see here: https://forum.powerampapp.com/topic/16541-intel-based-car-head-unit/ and as you can see I have got it working although I'm still not sure why.
In summary, just uninstall v2, download the v3 apk from here https://powerampapp.com/download-poweramp/ and install it and it should run fine. Then just install the unlocker from the play store as normal (assuming you have the paid version) and it works fine. I'm now running Poweramp v3 on my Intel based Joying unit with no issues whatsoever. Just remember to turn off auto update for Poweramp in the play store otherwise I think it will 'upgrade' it to v2 again.
As I said though, I really don't know how it's working as others have said that they cannot get it to run at all on other Intel based hardware.
Hope this works for you.
Click to expand...
Click to collapse
Hello
thanks it works
I have another question with Poweramp, i set volume to 100% and it reduces automatically to 87%! Strange because i disable limiter.
Any idea?
Thanks again
fabien_m2002 said:
Hello
thanks it works
I have another question with Poweramp, i set volume to 100% and it reduces automatically to 87%! Strange because i disable limiter.
Any idea?
Thanks again
Click to expand...
Click to collapse
I'm glad it's working.
I'm afraid I have no idea regarding the volume issue. It's not something I've noticed but I may just be anaware of it. Where are you trying to set the volume, on the main unit volume buttons or somewhere in Poweramp itself.
Russell_S said:
I'm glad it's working.
I'm afraid I have no idea regarding the volume issue. It's not something I've noticed but I may just be anaware of it. Where are you trying to set the volume, on the main unit volume buttons or somewhere in Poweramp itself.
Click to expand...
Click to collapse
In poweramp, in the tone settings (the knob volume) when music is playing
fabien_m2002 said:
In poweramp, in the tone settings (the knob volume) when music is playing
Click to expand...
Click to collapse
I've not touched those settings in Poweramp, I just use the main unit volume & equaliser. I'll have a look later today and report back.
Russell_S said:
I've not touched those settings in Poweramp, I just use the main unit volume & equaliser. I'll have a look later today and report back.
Click to expand...
Click to collapse
Thanks! I notice another issue: my steering wheel command don't work anymore (next/previous track).
Hello,
I recently bought isudar unit (px5, android 8, 4 GB ram, MTCE_GS_v3.01_3) for my 2011 fiat bravo and there is no vehicle info application. Original navigiation shows information like consumption, trip, etc. so the CAN gives that info to HU.
I found this thread:
https://forum.xda-developers.com/an...opment/vehicle-apk-reworking-px3-px5-t3893809
and downloaded apks. One of them installed, but its not working (after click app shows and close immediately). Others won't even install.
Anyone had similar issue or can help me with that?