Related
All I see problem and not downloading. Is there any confirmed downloads and installs of Nougat on G930F , like on any continent ?
No there isn't. Bye
rajman said:
No there isn't. Bye
Click to expand...
Click to collapse
Amazing ! Bye !
rajman said:
No there isn't. Bye
Click to expand...
Click to collapse
russiandivxclub said:
All I see problem and not downloading. Is there any confirmed downloads and installs of Nougat on G930F , like on any continent ?
Click to expand...
Click to collapse
What do you mean? British BTU officially updated two days ago and it's available for download, or I'm just not understanding your question? XD
Sent from my SM-G930F using Tapatalk
It downloaded yesterday both of mine and my wife's S7's (UK - SG930F - Unlocked Version)
Yes I also got the BTU OTA 3 days ago. I was having unlock issues, basically requiring me to enter pin most of the time and not accepting fingerpint unlock. Deleted and entered my fingerprints then a factory reset and still the same. Flashed back to australian firmware and the problem went away. Samsung Pay also does not work for US users with BTU firmware but it works fine with australian. So I'm back to waiting and hope when I get the next OTA the unlock issue doesn't happen again. I personally wasn't blown away but I only stayed with it a day. I didn't like the new notification panel...but I'm sure most do.
I have also had problems with my S7 on Nougat BTU. My S7 is a ETL (Checz Unlocked) in Spain. Data connection doesn't seem to work. All works except that (calls, sms, wi-fi). I tried also O2C, also Nougat. I've downgraded to MM ETL and Data connection works fine. I'm now downloading MM BTU, just in case data works in MM. If it does, I will try to upgrade to N.
You are missing point guys. I have regular international unbranded (no carrier) version of SGS7 Model G930F. Question is this.
Is there any confirmed OTA downloads and successful updates without ANY modifications. Download and install just simply by going into download manually or automatic notification about Nougat available just like any other update. I see ODIN, BTU some other crap that I need to do. NO. I want OTA without doing anything. So once again is there any confirmed OTA updates for international version of G930F. Like Right now I have software version: G930FXXU1BPLB/G930FOJV1BPK2/G930FXXU1BPJJ
If you can point of what EXACT version of international unit I have that'll be great because if people receiving updates already I don't understand why I am not.
P.S.
I do understand there are different versions of G930F but all I want is OTA to Nougat without doing anything.
Thanks !
russiandivxclub said:
You are missing point guys. I have regular international unbranded (no carrier) version of SGS7 Model G930F. Question is this.
Is there any confirmed OTA downloads and successful updates without ANY modifications. Download and install just simply by going into download manually or automatic notification about Nougat available just like any other update. I see ODIN, BTU some other crap that I need to do. NO. I want OTA without doing anything. So once again is there any confirmed OTA updates for international version of G930F. Like Right now I have software version: G930FXXU1BPLB/G930FOJV1BPK2/G930FXXU1BPJJ
If you can point of what EXACT version of international unit I have that'll be great because if people receiving updates already I don't understand why I am not.
P.S.
I do understand there are different versions of G930F but all I want is OTA to Nougat without doing anything.
Thanks !
Click to expand...
Click to collapse
Only country code BTU has OTA update for Nougat, if your G930F is not running a BTU CSC, you have to wait
Or, flash BTU Marshmallow and you'll get the OTA straight away
*Detection* said:
Only country code BTU has OTA update for Nougat, if your G930F is not running a BTU CSC, you have to wait
Or, flash BTU Marshmallow and you'll get the OTA straight away
Click to expand...
Click to collapse
I've downloaded the btu firmware from sammobile. There are 5 files therein. Do I flash all or just the AP with odin?
auriga1000 said:
I've downloaded the btu firmware from sammobile. There are 5 files therein. Do I flash all or just the AP with odin?
Click to expand...
Click to collapse
I flashed all except HOME_CSC
(CSC will reset the phone to factory defaults)
Which is a good thing for a major OS upgrade IMO
Does anyone have a link to BTU_CSC?the CSC in the BTU 7.0 firmware doesn't change my product code
That is my point. BTU is a variant of G930F. How about All of them ? I mean they're not saying some variants are being updated, they're saying G930F and G935F being updated. I wish someone had some understand or some stats of what variants are receiving update.
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
kamranali44 said:
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
Click to expand...
Click to collapse
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
No updates on Smart switch
userName'dYa said:
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
Click to expand...
Click to collapse
I do not have root or custom recovery. I have downloaded the firmware from sammobile and checked that the knox warranty is not tripped over and the device status is still official.
MAX 404 said:
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
Click to expand...
Click to collapse
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Do you get any error?
userName'dYa said:
Do you get any error?
Click to expand...
Click to collapse
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
kamranali44 said:
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
Click to expand...
Click to collapse
Are these bug fixes for the country AND the carrier you are using
userName'dYa said:
Are these bug fixes for the country AND the carrier you are using
Click to expand...
Click to collapse
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
kamranali44 said:
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
Click to expand...
Click to collapse
Yes the carrier matters even for unlocked phones
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
Okay, in this case I think I will have to wait for O2 to approve them.
I thought the idea of having an unlocked phone from samsung is to use any sim and get updates directly from Samsung when they release it.
kamranali44 said:
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Click to expand...
Click to collapse
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
I was wondering the same and SergioA is right. I still have the DBT CSC although I was flashing the BTU Firmware. Thanks for clarification
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
So my S7(Sprint) running on G930U firmware will go back to Sprint Nougat firmware full of bloatware?
MAX 404 said:
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Click to expand...
Click to collapse
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
SergioA said:
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
Click to expand...
Click to collapse
My S7 DUOS FD and my wife's S7 F both recieved the Nougat OTA update DQB1 today, mine was originally CSC XSG (UAE) and mi wife's was CSC TTT (Trinidad And Tobago), and both were updated to CSC BTU Nougat Final release, changing the CSC to BTU (this will wipe out your memory in the process but for a newer OS version it is recommended). I had doubts about getting any OTA updates since my S7 is the FD version which does not exists as a BTU phone originally, but in the end I got the update.
Long story short, if you want to recieve OTA updates after sideloading firmware with ODIN with a different CSC, you should fully convert to that new CSC, otherwise you won't get the OTA's.
kamranali44 said:
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
Click to expand...
Click to collapse
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
If your using the btu version for UK phones, then how did you manage not to brick your phone? The UK phones do not have snapdragon, they have the Samsung chips.
MAX 404 said:
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
Click to expand...
Click to collapse
Thank you, you are a hero :good:. I did update via odin and installed it without losing any data.
As I have said I have previously (about a week ago) used the CSC file rather than HOME_CSC.
I have the Phone Info app, The Orignal CSC code is blank(is it normal?), Does this look normal as I have not checked the CSC before updating to android nougat. I have added a screenshot of it.
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Try to flash G920FXXU5DQA7 (CSC code:BTU)
chemeleon said:
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Click to expand...
Click to collapse
You could possibly use smartswitch if you have the serial number of the phone which would download the default firmware that the phone came with if odin fails again
Yes i agree, smartswitch could be your best option.
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
Yeah looks like this is a bootloader issue, it won't let you install a firmware which contains an older bootloader, only thing I can is to download the latest non branded UK firmware and see if that flashes.
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
LollosoSi said:
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
Click to expand...
Click to collapse
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
forumber2 said:
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
You could try using samfirm which a windows application which downloads samsung firmwares
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
As @sofir786 said, you can use SamFirm;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open it, set the settings like this;
sofir786 said:
You could try using samfirm which a windows application which downloads samsung firmwares
Click to expand...
Click to collapse
Wow I didn't know, it works thanks
forumber2 said:
As I said before; Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
I'll try flashing when the download finishes
Edit:
WORKING!
I used last(I think) ITV
File names:
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CSC: CSC_ITV_G920FITV5DQA2_CL10387678_QB12242913_REV02_user_low_ship.tar
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar
Samsung updated their bootloaders to 4XX in September/October so you cant flash back an older one or downgrade,so the only solution you have is to flash the new one which is 5XX released this year.
Flashed the latest UK revision (not the O2 branded one) and it worked
chemeleon said:
Flashed the latest UK revision (not the O2 branded one) and it worked
Click to expand...
Click to collapse
Told you
Hi i bought a second hand s8+(SM-G955U) it was still on nougat and i didn't get any OTAs, so i update it to Oreo with Odin. I still dont get OTAs, and i never could find my CSC related firmware in g955u models on sammobile. so i looked up my device in IMEI.info and find there that my device is actually G955W and from there i also found my CSC based firmware in Canada my CSC is XAC. I just also find on the back cover of my phone that my s8+ is actually SM-G955W. so my question here is how could i go back to g955w firmware? Just download g955w firmware and flash it through odin?
In setting my phone is
SM-G955U
Baseband version G955USQU5CRL2
Service provider SW ver.
XAA/XAA/XAC
and the firmware ive downloaded from SamFirm is
Model Sm-G955W
Region XAC
PDA G955WVLU5BRJ2
CSC G955WOYA5BRJ2
Please i really need help i dont know what to do here.
abdullahrather said:
Hi i bought a second hand s8+(SM-G955U) it was still on nougat and i didn't get any OTAs, so i update it to Oreo with Odin. I still dont get OTAs, and i never could find my CSC related firmware in g955u models on sammobile. so i looked up my device in IMEI.info and find there that my device is actually G955W and from there i also found my CSC based firmware in Canada my CSC is XAC. I just also find on the back cover of my phone that my s8+ is actually SM-G955W. so my question here is how could i go back to g955w firmware? Just download g955w firmware and flash it through odin?
In setting my phone is
SM-G955U
Baseband version G955USQU5CRL2
Service provider SW ver.
XAA/XAA/XAC
and the firmware ive downloaded from SamFirm is
Model Sm-G955W
Region XAC
PDA G955WVLU5BRJ2
CSC G955WOYA5BRJ2
Please i really need help i dont know what to do here.
Click to expand...
Click to collapse
backup sdcard
sammobile
https://www.sammobile.com/firmwares/
g955W model or updato fast download
last update best
download odin via sammobile and flash 4 file firmware
bl ap cp csc not home
deadedge7 said:
backup sdcard
sammobile
https://www.sammobile.com/firmwares/
g955W model or updato fast download
last update best
download odin via sammobile and flash 4 file firmware
bl ap cp csc not home
Click to expand...
Click to collapse
I have tried that It doesn't work. Odin stops at 'SetupConnection'
abdullahrather said:
I have tried that It doesn't work. Odin stops at 'SetupConnection'
Click to expand...
Click to collapse
Use the patched version of Odin. Just search Google for "patched Odin" & you'll find it. However, if you use the G955W version of the firmware, you'll lose several features of your phone. For example, the G955W firmware disables the FM Radio. Good luck.
Sent from my SM-G955U using Tapatalk
zirt57 said:
Use the patched version of Odin. Just search Google for "patched Odin" & you'll find it. However, if you use the G955W version of the firmware, you'll lose several features of your phone. For example, the G955W firmware disables the FM Radio. Good luck.
Click to expand...
Click to collapse
Thank you so much friend, i will sure try it and let you know.
You know i don't really use radio and the main reason to switch is because i don't get OTA updates, anti malware in device Maintenance's won't activate, and i couldn't install certain samsung apps like samsung members and samsung+
Thanks again
zirt57 said:
Use the patched version of Odin. Just search Google for "patched Odin" & you'll find it. However, if you use the G955W version of the firmware, you'll lose several features of your phone. For example, the G955W firmware disables the FM Radio. Good luck.
Click to expand...
Click to collapse
Its not working, getting the same error as in normal Odin.
abdullahrather said:
Its not working, getting the same error as in normal Odin.
Click to expand...
Click to collapse
Flash the same revision bootloader you're on. Combo file first then your w firmware
deadedge7 said:
Click to expand...
Click to collapse
Thanks man. It worked,
Samsung switch on my pc was the problem, i uninstalled it and tried then it worked.
abdullahrather said:
Thanks man. It worked,
Samsung switch on my pc was the problem, i uninstalled it and tried then it worked.
Click to expand...
Click to collapse
:good:
I have flashed both the ATT and USC firmwares for the SM-N970U1 but still no wifi calling option. At this point I don't know if I've actually flashed the ATT firmware or not. Odin says Pass. Under the Service Provider SW ver. it makes mention of ATT/ATT/XAA but I'm not sure if that means the phone is on the ATT network or if that's firmware info. How do I tell what firmware I've actually flashed?
rmrl2008 said:
I have flashed both the ATT and USC firmwares for the SM-N970U1 but still no wifi calling option. At this point I don't know if I've actually flashed the ATT firmware or not. Odin says Pass. Under the Service Provider SW ver. it makes mention of ATT/ATT/XAA but I'm not sure if that means the phone is on the ATT network or if that's firmware info. How do I tell what firmware I've actually flashed?
Click to expand...
Click to collapse
There is already a thread on this and one of the members was nice enough to post exactly what firmware to flash.
I suggest looking for that thread its exactly what you need
That thread is for the Note 10 plus. I'm asking about the Note 10. That's where I got the idea to flash the USC version from but like I said, didn't work.
rmrl2008 said:
That thread is for the Note 10 plus. I'm asking about the Note 10. That's where I got the idea to flash the USC version from but like I said, didn't work.
Click to expand...
Click to collapse
Bummer, figured the thread would give you enough guidance to get it done on the smaller one.
Of course samsung has to make it difficult lol
I used the home_csc file instead of the csc. That should not have been an issue. I assume I'm still on the unlocked firmware but I have no clue. I don't see any AT&T bloatware or Logo. I downloaded the firmwares from the sammobile site. Even downloaded from the samfirm app just in case. So I flashed 3 times. No difference.
rmrl2008 said:
I used the home_csc file instead of the csc. That should not have been an issue. I assume I'm still on the unlocked firmware but I have no clue. I don't see any AT&T bloatware or Logo. I downloaded the firmwares from the sammobile site. Even downloaded from the samfirm app just in case. So I flashed 3 times. No difference.
Click to expand...
Click to collapse
What did you type into the SamFirm when you searched for firmware for your AT&T?
SM-N970U1 and ATT
rmrl2008 said:
SM-N970U1 and ATT
Click to expand...
Click to collapse
Maybe ATT doesn't put their firmware online as I tried searching and couldn't find on SamFirm. I am on T-Mobile and we have 2 different firmware versions.
If I type in SamFirm the following:
1) SM-N970U1 and region: TMB - I will get pretty much same unlocked firmware that I had on the phone, nothing will pretty much change after flashing this firmware.
2) SM-N970U and region: TMB - I will get T-Mobile firmware that is on their branded devices and all features.
Ask the OP in the below thread for latest ATT firmware file(userdata). If you recently flashed firmware, but the firmware in the thread is a bit older, you may not be able to flash until newer version is released.
https://forum.xda-developers.com/galaxy-note-10/how-to/n970u-n970u1-firmware-links-t3957705
So should I search for SM-N970U and ATT instead?
I did also do an ota update when I first got my phone so I have the August security update. Not sure if that's an issue since I have newer update?
rmrl2008 said:
So should I search for SM-N970U and ATT instead?
Click to expand...
Click to collapse
Normally that is correct, but it doesn't look like ATT is putting their firmware up on server as other carriers do.
Go to the link I provided of that thread. Click on the first link that says U firmware. Then look a bit down where is says: SGO - 1 - 9.0. After this link opens, you will see first 2 files: N970U_SGO_1.zip and USERDATA_ATT... You can try to download these files, extract to a folder and flash including the userdata file. If it fails, then you may need to wait until this person provides new firmware and you will need to download the firmware and that userdata_att
Yeah At&t is horrible about posting firmware. I usually just use USC firmware and once installed it will provision to At&t based on sim and you will get all At&t carrier options such as Volte..wificalling..advanced messaging.
Sent from my SM-N960U using Tapatalk
Thanks yeah that's what I'm about to do. My mistake was downloading from the U1 section instead of U. So confusing. Why even have any carrier firmwares under the U1 section?
Flashed the U / USC firmware and got AT&T firmware.
rmrl2008 said:
Flashed the U / USC firmware and got AT&T firmware.
Click to expand...
Click to collapse
Are you on the July security patch? I just did this process with the ATT firmware and it says up to date with July security patch. On the U1 unlocked firmware, I was on August already. I just wanted to be sure I didnt mess up something and it wont update properly.
I am on the August security update. That was part of the USC firmware. I didn't do an ota update after flashing so at this point I don't know if ota updates will work for me.
rmrl2008 said:
I am on the August security update. That was part of the USC firmware. I didn't do an ota update after flashing so at this point I don't know if ota updates will work for me.
Click to expand...
Click to collapse
Did you download your files from here https://androidfilehost.com/?w=files&flid=297974 ? Thats here I got mine and its for the SGO firmware on Note 10. Im thinking something went wrong now becasue mine wont update OTA and smart switch says im up to date when there is another firmware for ATT out - ASH4 version.
I got it from samfirm which is the ash4 version.
rmrl2008 said:
I got it from samfirm which is the ash4 version.
Click to expand...
Click to collapse
Thanks. What did you put for Model# and region? I input SM-N970U and USA(AWS) and nothing pops up. Using samfirm 0.4.0
Use USC for region