Hey Guys,
i was having issues with my Fit 2 pro band so i decided to re-flash stock firmware to resolve any issues.
After flashing netodin stock firmware fit 2 pro stuck on downloading screen.
i am unable to access download wireless menu by pressing power button now. Tried to restart it several times by unable to get past downloading screen.
Please suggest something.
Thanks in advance.
:good:
Rocinante.v1 said:
Hey Guys,
i was having issues with my Fit 2 pro band so i decided to re-flash stock firmware to resolve any issues.
After flashing netodin stock firmware fit 2 pro stuck on downloading screen.
i am unable to access download wireless menu by pressing power button now. Tried to restart it several times by unable to get past downloading screen.
Please suggest something.
Thanks in advance.
:good:
Click to expand...
Click to collapse
same problem here, have you found a solution yet
USB cable...
https://forum.xda-developers.com/showpost.php?p=81551537&postcount=82
Best Regards
Related
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.
Thread moved to General.
I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!
successfully done p 6200
Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!
ive also had the same problem duno wut to do anymore
Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck
i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!
CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app
Hello All,
What the best ROM which support Arabic for Samsung i5800 Galaxy 3, and how to install it by details if possible, please?
I tried already to upgrade to one ROM, but I got problem with mobile.
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you in advance,
FMMM said:
Hello All,
What the best ROM which support Arabic for Samsung i5800 Galaxy 3, and how to install it by details if possible, please?
I tried already to upgrade to one ROM, but I got problem with mobile.
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you in advance,
Click to expand...
Click to collapse
Kyrillos' ROM supports it i think. Go on the development forum and search for Kyrillos' 9.5
Hello,
Thank you for your reply, what about the second part of my question, please?
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you for your help in advance,
Hold the volume down, home button and power button at the same time for 5 seconds and it should go into download mode. If it doesn't go into download mode, your phone has been hard bricked which means it is useless but i doubt that will happen because i have unplugged my phone whilst i was installing a ROM and used the procedure i have written and it worked.
I have done that, and still no display, do you think the problem from battery or hard bricked?
I plug the mobile for whole day in the charger, and I cannot see on the display the image of battery even, what you suggest, please?
That's not good.. i think you have hard-bricked it.. -> back to samsung service...
If you cant go into download mode by keypressing,you probably hard bricked your phone...the samsung service should be able to bring the phone back to life...just one question,why in hell would you unplug your phone during flashing proces? ?
Sent from my GT-I5800 using XDA App
artifex21 said:
If you cant go into download mode by keypressing,you probably hard bricked your phone...the samsung service should be able to bring the phone back to life...just one question,why in hell would you unplug your phone during flashing proces? ?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
even i unplugged phone during flashing months ago, because flashing process just stopped. But i didn't flash bootloader, so my problem was fixed by flashing again and i could enter the download menu. Not sure why but i was happy
Best rom??
http://forum.xda-developers.com/showthread.php?t=1478503
my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!
alvin_vii said:
my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!
Click to expand...
Click to collapse
Try reflash original HC firmware. For me worked
yep, best bet is to reflash with original HC then format/wipe using default wiper in the recovery menu.
I also tried flashing an official ICS directly to a bootloop stricken device and it works too
Bootloop Problem
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..
ginoboyz said:
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..
Click to expand...
Click to collapse
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.
alvin_vii said:
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.
Click to expand...
Click to collapse
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?
ginoboyz said:
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?
Click to expand...
Click to collapse
did you try the XXLA3 ATO firmware? 3 files with ATO .pit files?
Don't easy try to flash with pit file,it's very danger and will destroy your emmc.try to flash it with the can over Odin in download mode
Sent from my GT-P6800 using xda app-developers app
Hi all,
I have a Galaxy Tab 2 10.1 and was trying to upgrade to 4.1.2 through this (http://droidviews.com/2013/samsung-...3g-wifi-gets-android-4-1-2-jelly-bean-update/) guide. ODIN finished successfully but on reboot I am at presented with a screen that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I plus my tab in via USB and fire up Kies but my device is not found.
I have tried Power+Vol up and Power+Vol down but I am returned to the same screen/message.
Is my best option to let the battery drain then charge and try to get into download mode via Power+Vol up and use ODIN to flash the factory standard image?
If there is another way that would be quicker than waiting for a battery drain I would appreciate any assistance. Actually at the moment I would just appreciate any assistance
TIA
Does ODIN see your tab on the "firmware encountered an issue" screen?
Posted from my Fascinate using XDA Premium
MultipleMonomials said:
Does ODIN see your tab on the "firmware encountered an issue" screen?
Posted from my Fascinate using XDA Premium
Click to expand...
Click to collapse
Thanks for the reply
I left it overnight to discharge and tried again this morning and all button combinations end at the same screen.
I have plugged it in this morning for all of about 2 min to get a small amount of charge into it to see if ODIN can see it and it does. Should I try to re-flash it?
Is there a different method based on it's current state?
The author of the post has been kind enough to reply to me and it looks like I may not have been in download mode, but rather in recovery when I flashed it.
I have been flashing ROM's on phones and my old xoom for about 3 years now and this is the first issue I have had. I was even more careful than usual on this one as it was the first change I had made to the tab, I guess it just goes to show that you need to be VERY aware of the different states and what they look like before flashing.
Yeah, I've seen this before, and in those cases the tab was actually in download mode. Try flashing with ODIN.
Posted from my Galaxy Tab 2 with CM10.1
Just re-flashed 4.1.2 firmware again in ODIN and it has worked
Feels a bit sluggish, might do a factory reset to see if that flashes some of the crap out of the upgrade.
Thanks for the replies......much appreciated
I wonder if someone could help me. I successfully rooted my old GT P1000 with the intention of updating it from Gingerbreadvto run Jelly Bean. However whilst trying to install Clockwork Mod recovery it seems to be stuck on a black screen showing a phone and a computer with a warning sign showing that the connection between phone and computer has been broken. I used Odin 1.7 to flash Cwm. While I was trying to do this Is I kept seeing a message that the flashing had failed. After several attempts I tried to switch off my tab. After trying to switch it off I got the black screen as described previously. I have tried the usual power + volume button to reset it but it just stays stuck on the same screen. The tab will now switch off but when I switch it back on I get the same black screen. When I attach it to my computer, Odin 1.7 recognises that it is attached. Any help would be gratefully received. Many thanks Michel
Velocegbr said:
I wonder if someone could help me. I successfully rooted my old GT P1000 with the intention of updating it from Gingerbreadvto run Jelly Bean. However whilst trying to install Clockwork Mod recovery it seems to be stuck on a black screen showing a phone and a computer with a warning sign showing that the connection between phone and computer has been broken. I used Odin 1.7 to flash Cwm. While I was trying to do this Is I kept seeing a message that the flashing had failed. After several attempts I tried to switch off my tab. After trying to switch it off I got the black screen as described previously. I have tried the usual power + volume button to reset it but it just stays stuck on the same screen. The tab will now switch off but when I switch it back on I get the same black screen. When I attach it to my computer, Odin 1.7 recognises that it is attached. Any help would be gratefully received. Many thanks Michel
Click to expand...
Click to collapse
Flash the stock firmware for your specific model number via Odin.
Then start over with flashing CWM.
Sent from my LGL84VL using Tapatalk
Thanks for that. Do you have any idea where I might find the stock firmware for a P1000
Thanks Michel
Droidriven said:
Flash the stock firmware for your specific model number via Odin.
Then start over with flashing CWM.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Velocegbr said:
Thanks for that. Do you have any idea where I might find the stock firmware for a P1000
Thanks Michel
Click to expand...
Click to collapse
Google search for:
"Stock firmware for Samsung P1000"
Or
"Return to stock (your model number)"
You'll probably find it at Sammobile .com or at samsung-updates .com.
Sent from my LGL84VL using Tapatalk