Hello All,
What the best ROM which support Arabic for Samsung i5800 Galaxy 3, and how to install it by details if possible, please?
I tried already to upgrade to one ROM, but I got problem with mobile.
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you in advance,
FMMM said:
Hello All,
What the best ROM which support Arabic for Samsung i5800 Galaxy 3, and how to install it by details if possible, please?
I tried already to upgrade to one ROM, but I got problem with mobile.
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you in advance,
Click to expand...
Click to collapse
Kyrillos' ROM supports it i think. Go on the development forum and search for Kyrillos' 9.5
Hello,
Thank you for your reply, what about the second part of my question, please?
I remove/unplug the cable during the installation thinking that my mobile got frozen... when I use the "Power" button , I have no display, what to do also..
Thank you for your help in advance,
Hold the volume down, home button and power button at the same time for 5 seconds and it should go into download mode. If it doesn't go into download mode, your phone has been hard bricked which means it is useless but i doubt that will happen because i have unplugged my phone whilst i was installing a ROM and used the procedure i have written and it worked.
I have done that, and still no display, do you think the problem from battery or hard bricked?
I plug the mobile for whole day in the charger, and I cannot see on the display the image of battery even, what you suggest, please?
That's not good.. i think you have hard-bricked it.. -> back to samsung service...
If you cant go into download mode by keypressing,you probably hard bricked your phone...the samsung service should be able to bring the phone back to life...just one question,why in hell would you unplug your phone during flashing proces? ?
Sent from my GT-I5800 using XDA App
artifex21 said:
If you cant go into download mode by keypressing,you probably hard bricked your phone...the samsung service should be able to bring the phone back to life...just one question,why in hell would you unplug your phone during flashing proces? ?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
even i unplugged phone during flashing months ago, because flashing process just stopped. But i didn't flash bootloader, so my problem was fixed by flashing again and i could enter the download menu. Not sure why but i was happy
Best rom??
http://forum.xda-developers.com/showthread.php?t=1478503
Related
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.
Thread moved to General.
I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!
successfully done p 6200
Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!
ive also had the same problem duno wut to do anymore
Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck
i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!
CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app
Hi all
I have new Samsung Dart (android)- the device won't turn on after I installed ClockworkMod,
I tried to add addition language fonts to the phone,
I rooted the device first,
Then i installed "ClockworkMod"
I tried removing the battery, holding the power+volume down for 30 sec
nothing....
any advice will be welcomed.
Thanks
did you try putting the battery back in and holding vol up and power to boot into recovery?
Sent from my MB860 using xda premium
shark669 said:
Hi all
I have new Samsung Dart (android)- the device won't turn on after I installed ClockworkMod,
I tried to add addition language fonts to the phone,
I rooted the device first,
Then i installed "ClockworkMod"
I tried removing the battery, holding the power+volume down for 30 sec
nothing....
any advice will be welcomed.
Thanks
Click to expand...
Click to collapse
well i think it is hard bricked just go to the service center act like a fool dont say any thing about recovery . Tell them any story and youll get it reparied
Sent from my GT-S5670 using xda premium
konna280 said:
did you try putting the battery back in and holding vol up and power to boot into recovery?
Click to expand...
Click to collapse
Made me laugh
Did you ever get anything on the screen when trying to power on again? How did you install clockworkmod, and what version did you use? Also what is the source link to the clockworkmod that you used?
If you can get back into download mode on your phone, you can find the stock roms/tools/directions at
http://www.madteam.co/forum/development-70/(archive)-stock-roms-and-tools/
>>Did you ever get anything on the screen when trying to power on again
Nothing, its Dead like a rock
Will USB Jig help? or 300K resistor?
Thank you!
Sounds like you will have to send it in for repair. I don't think that a jig will help you.
Where did you get CWM from, and what version? Was it for the T499 or for S5570?
The Phone is bricked. I killed mine too flashing the clockwork mod, it did not belong on this phone. I think the phone is not on the list because it is not supported. The only way to fix it is to re install the factory boot loading files thought the service pins in the back of the circuit board using a special tool. I'm looking at mine as I type. Oh well, it happens, I just went ahead and bought an used HD2.
For anyone that does want CWM on the SGH-T499, have a look here http://www.madteam.co/forum/development-70/(development)-clockworkmod-recovery-for-sgh-t499/
Hey, guys!
First post from me in this forum, although I have been searching for some things for some times.
So, the problem is that I had Cyanogenmod 7.2 on my LG P500 for couple months. And ROM was working ok, but there was some problems and I thought I should get back to stock ROM, because actually it was working better and smoother. So, I searched for stock roms for my phone, found one and started to flash. Everything flashed well, phone booted up and then wave of errors started to come. So I thought that it ain't gonna be usable and tried to install a stock rom through official LG Updater, which obviously wasn't a good thing to do. everything, downloaded, installed, phone booted up and I was waiting with hope that it will boot up (android loading screen at least was showing), but it didn't happen. After that I managed to power phone off with getting battery out and then I tried to fix everything with one tutorial I saw in this forum with kdz updater. but at the begging it couldn't connect with my phone and after that screen showd Emergency Mode. nothing I could do, again took out battery to power it off and now phones doesn't show any signs of life.
What does it mean (maybe my phones is same as brick) and what should I do?
I would appreciate your help.
Nau4a said:
Hey, guys!
First post from me in this forum, although I have been searching for some things for some times.
So, the problem is that I had Cyanogenmod 7.2 on my LG P500 for couple months. And ROM was working ok, but there was some problems and I thought I should get back to stock ROM, because actually it was working better and smoother. So, I searched for stock roms for my phone, found one and started to flash. Everything flashed well, phone booted up and then wave of errors started to come. So I thought that it ain't gonna be usable and tried to install a stock rom through official LG Updater, which obviously wasn't a good thing to do. everything, downloaded, installed, phone booted up and I was waiting with hope that it will boot up (android loading screen at least was showing), but it didn't happen. After that I managed to power phone off with getting battery out and then I tried to fix everything with one tutorial I saw in this forum with kdz updater. but at the begging it couldn't connect with my phone and after that screen showd Emergency Mode. nothing I could do, again took out battery to power it off and now phones doesn't show any signs of life.
What does it mean (maybe my phones is same as brick) and what should I do?
I would appreciate your help.
Click to expand...
Click to collapse
when your phone is in emergency mode then it will connect to the kdz updator
and then flash ur rom
ok, but there's no way I can turn my phone on now. or is there way to get to emergency mode?
U might have bricked ur phone. Bring it lg service centre and say that it was bricked while updatong the stock rom
Sent from my LG-P500 using xda premium
Nau4a said:
ok, but there's no way I can turn my phone on now. or is there way to get to emergency mode?
Click to expand...
Click to collapse
search for emergency mode in google
allenwalker1998 said:
U might have bricked ur phone. Bring it lg service centre and say that it was bricked while updatong the stock rom
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
could be, but can't I unbrick it myself?
Nau4a said:
could be, but can't I unbrick it myself?
Click to expand...
Click to collapse
Plug in the wall charger for about an hour, and then try the buttons - press power button+ volume up button + back button together
keep pressed all three for long duration (maybe 8-10 secs you see yellow screen with written Emergency Mode). Then you are in Emergency Mode.
If no screen yet, then bricked - only LG repair center option.
Hi.
I got my hands on a tab, running on Android. I have no idea about the manufacturer; however, the boot-up screen says ATLAS.
The issue is that whenever I try to Power the device on, it gets stuck on the boot screen for hours together, following which the battery drains out. I can't even get the device into download mode as the Volume keys are touch-based.
I tried charging the device to 100% and yet it was stuck on the boot screen. I also tried pressing the power button for 30 seconds (as suggested on the net) and yet the device failed to boot.
If the device needs flashing a new rom, please provide instructions for that as well!
Any help would be really appreciated. Thank you!
Note: The only hardware buttons on the device are the Power-button and the Home-button.
flash the firmware if you have ! or cwm backup or go to service center !
Well.. I guess the tab you bought is not a new tab, right?
Whether it is true or not, try to connect your tab with a PC first to find out if the PC is able to read it.
If yes, try to find out a compatible ROM for your device. Let me know if any more news with your tab
Sent from my WT19i using xda premium
Rei Zazie said:
Well.. I guess the tab you bought is not a new tab, right?
Whether it is true or not, try to connect your tab with a PC first to find out if the PC is able to read it.
If yes, try to find out a compatible ROM for your device. Let me know if any more news with your tab
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
You are right. The tab isn't new and it belongs to a friend of mine. And yes, the PC isn't able to detect it. Since the tab is able to make it till the boot screen, I thought I could enter download mode and go through the process of flashing CWM through Odin, but that seems to be a pain as all the volume buttons are touch based and not the hardware ones.
If I can get into download mode, I suppose I can get it into working condition (after finding a compatible rom, of course!).
anabhi said:
flash the firmware if you have ! or cwm backup or go to service center !
Click to expand...
Click to collapse
The tab isn't being detected by the PC. As a result, I can't do anything!
gadgyfreak said:
The tab isn't being detected by the PC. As a result, I can't do anything!
Click to expand...
Click to collapse
Ok, so first of all, can you find out what exactly is your tab's brand? because if you can, then we can try to find a proper fix for it..
Hey i have 2 phones that not working i will be more than happy if you help me. start with the first one.
I found Galaxy S2 and tried to torn it on Not Working. i tried to charge it Still Dont working. when i plug it to my computer it didn't show nothing.
I have a battery charger so i pluged it in charge the battery put back and still, Not working. i tried Other Battery and again the same.
What can i do. what part maybe dont work or you have some idea. i dont want to buy new moterboard maybe there is a solution?
I have an Old galaxy S1 ( i9000)
i rooted him and all was Just fine. and one day it's like all deleted. the phone is charging. ( but not showing nothing in my computer screen)
and it's stack on the Galaxy Logo when you torn it on. i tried to do Factory reset But same problem. how i can delete the room and install the original Rom of it.
?
Hi,
I think your phone is bricked.
If it can show anything on the screen. Try also recovery and download mode. Your phone is soft bricked. There are lots of guides on the internet to unbrick your device.
If nothing is happening using any key combination your phone is dead.
thank you
thank you. but there is no key that helping. its not torn on... how i know what part i need to change?
supergerrit said:
Hi,
I think your phone is bricked.
If it can show anything on the screen. Try also recovery and download mode. Your phone is soft bricked. There are lots of guides on the internet to unbrick your device.
If nothing is happening using any key combination your phone is dead.
Click to expand...
Click to collapse
Oren144134 said:
thank you. but there is no key that helping. its not torn on... how i know what part i need to change?
Click to expand...
Click to collapse
Try to put your phone into the download mode (google for it). If it is possible to put your phone into the download mode, you can flash the stock ROM for your device again using Odin. Just look at google for some guides to do this.
If you nothing is working and you are sure the battery is charged. There is nothing you can do about is...
Hope this is helpful.