[Q] Galaxy s2 Dead. Help me - General Questions and Answers

Hey i have 2 phones that not working i will be more than happy if you help me. start with the first one.
I found Galaxy S2 and tried to torn it on Not Working. i tried to charge it Still Dont working. when i plug it to my computer it didn't show nothing.
I have a battery charger so i pluged it in charge the battery put back and still, Not working. i tried Other Battery and again the same.
What can i do. what part maybe dont work or you have some idea. i dont want to buy new moterboard maybe there is a solution?
I have an Old galaxy S1 ( i9000)
i rooted him and all was Just fine. and one day it's like all deleted. the phone is charging. ( but not showing nothing in my computer screen)
and it's stack on the Galaxy Logo when you torn it on. i tried to do Factory reset But same problem. how i can delete the room and install the original Rom of it.
?

Hi,
I think your phone is bricked.
If it can show anything on the screen. Try also recovery and download mode. Your phone is soft bricked. There are lots of guides on the internet to unbrick your device.
If nothing is happening using any key combination your phone is dead.

thank you
thank you. but there is no key that helping. its not torn on... how i know what part i need to change?
supergerrit said:
Hi,
I think your phone is bricked.
If it can show anything on the screen. Try also recovery and download mode. Your phone is soft bricked. There are lots of guides on the internet to unbrick your device.
If nothing is happening using any key combination your phone is dead.
Click to expand...
Click to collapse

Oren144134 said:
thank you. but there is no key that helping. its not torn on... how i know what part i need to change?
Click to expand...
Click to collapse
Try to put your phone into the download mode (google for it). If it is possible to put your phone into the download mode, you can flash the stock ROM for your device again using Odin. Just look at google for some guides to do this.
If you nothing is working and you are sure the battery is charged. There is nothing you can do about is...
Hope this is helpful.

Related

[Q] Phone doesnt boot

First,sr for my bad english.
Yesterday at noon,i was trying to get to JFD on Odin,but the phone keep rebooting after i did that,so i did a master clear,but i waited for 30 minutes and nothing happened(the yellow bar still appeared through..),so i pulled the usb cable out and then i tried to get to download mode again,but nothing came up.I tried using all the methods that i read,but still could not get into download mode or boot the phone up.So i'm very scared right now.
I hope that you will help me solve this problem.
alonecat said:
First,sr for my bad english.
Yesterday at noon,i was trying to get to JFD on Odin,but the phone keep rebooting after i did that,so i did a master clear,but i waited for 30 minutes and nothing happened(the yellow bar still appeared through..),so i pulled the usb cable out and then i tried to get to download mode again,but nothing came up.I tried using all the methods that i read,but still could not get into download mode or boot the phone up.So i'm very scared right now.
I hope that you will help me solve this problem.
Click to expand...
Click to collapse
Are you on a Galaxy S 4G? I believe JFD is a ROM for the Vibrant, not the SGS 4G.
If you did, you might want to try AdamOutler's unbrickable mod:
http://forum.xda-developers.com/showthread.php?t=1333424&highlight=unbrickable
is there an easier way to fix it im running windows so i cannot use unbrickable resurector,and i dont have any experience with fixing hardware
alonecat said:
is there an easier way to fix it im running windows so i cannot use unbrickable resurector,and i dont have any experience with fixing hardware
Click to expand...
Click to collapse
I really wish I knew of another way. You could try searching the forums a bit; there might be a way, but usually if the wrong boot loaders were installed you'd have to follow the link I sent, use a jig (which I know nothing about) or something of that nature.
I wish you luck.
What phone do u have?
i posted in this box so obliviously i have a SSGS4GT.T
Umm,can i ask u one more question?
Can i use JIG to trick the phone go into Download mode?_?.

Nexus S JB(4.1) "bricked" help!!!

update to 4.1 Jellybean .i used servarl day.one day,i shutdown the phone,then power on the phone,but i can't power the phone.i use the method "ubuntu UnBrickableResurrectorR40",but it's not useful.
in tencent qq group(qq group id:203219460),there are three people who encountered the same problem. xdaer,who can help me?please help,help,help!!!!
bsqsbylt said:
update to 4.1 Jellybean .i used servarl day.one day,i shutdown the phone,then power on the phone,but i can't power the phone.i use the method "ubuntu UnBrickableResurrectorR40",but it's not useful.
in tencent qq group(qq group id:203219460),there are three people who encountered the same problem. xdaer,who can help me?please help,help,help!!!!
Click to expand...
Click to collapse
help me out!
So you cannot even get into the bootloader?
I'm having the same problem...No bootloader...Nothing :crying:
Nexus S GT-I9020T Bricked
similar problem here. i took the batery out while the phone was booting and cant switch it on now.cant get in to fastboot mode (power + vol up).
i tried AdamOutler's UnBrickableResurrectorR40 tool (http://forum.xda-developers.com/show....php?t=1397393). it didnt detect my phone, so i made the hardware mod recomended by AdamOutler ( http://forum.xda-developers.com/show....php?t=1566475). Now it detects the phone and it is able to load the modified SBL.But the phone still stays dead.
why dont u guys try the tool and let us know how it goes... cheers
kwibis said:
So you cannot even get into the bootloader?
Click to expand...
Click to collapse
yes,any mod can't in.
similar problem
My battery fell out while my phone was booting. (Bought a spare battery and it didn't make great contact and the phone turned on and then lost contact with the battery while it was booting.)
I've tried multiple battery pulls, charging both batteries, plugging it in and unplugging it, different chargers... Nothing works.
I bought this phone used without a warranty so I'm screwed for just taking it back to any store to get it fixed and I can't afford to buy a new phone. :/
Gonna try that Ubuntu fix when I get home but as for now I have no idea what I'm going to do to fix this phone... >_<

Reviving my bricked P500

This is my first post at XDA. I don't know if I am in the right section. Kindly move the post if required.
Problem
1) I had my Optimus One running CM9.
2) It made my phone slow. So, I flashed it back to CM7.
3) It had some problems, so i was foolish enough to move it back to Gingerbread instead of restoring to CM9.
4) This is where my phone started acting strange. It was getting into a boot loop.
5) I then tried to fix it using some tools I don't remember, but since then it has been dead.
The phone is dead. The phone won't turn on. Not even in emergency mode. No response when charger or USB is connected. It just wont turn on.
It was about 4 months ago when I bricked my phone and had lost hope. I have now known it's hard living without an android.
Please let me know how i can fix this and revive my bricked phone.
Some of you may have a good laugh reading this. But I already have tears in my eyes.:crying:
I dont remember what all i did to my phone in order to brick it. So, please help in whatever way you can.
Thanks to everyone in advance.
rocketonp500 said:
This is my first post at XDA. I don't know if I am in the right section. Kindly move the post if required.
Problem
1) I had my Optimus One running CM9.
2) It made my phone slow. So, I flashed it back to CM7.
3) It had some problems, so i was foolish enough to move it back to Gingerbread instead of restoring to CM9.
4) This is where my phone started acting strange. It was getting into a boot loop.
5) I then tried to fix it using some tools I don't remember, but since then it has been dead.
The phone is dead. The phone won't turn on. Not even in emergency mode. No response when charger or USB is connected. It just wont turn on.
It was about 4 months ago when I bricked my phone and had lost hope. I have now known it's hard living without an android.
Please let me know how i can fix this and revive my bricked phone.
Some of you may have a good laugh reading this. But I already have tears in my eyes.:crying:
I dont remember what all i did to my phone in order to brick it. So, please help in whatever way you can.
Thanks to everyone in advance.
Click to expand...
Click to collapse
Repair
Sent from a powerful Ice Creamy Device
Reviving my bricked p500
Thanks!!! I kinda guessed nothing could be done. But would have loved a fix. Would have saved bucks!!!
rocketonp500 said:
Thanks!!! I kinda guessed nothing could be done. But would have loved a fix. Would have saved bucks!!!
Click to expand...
Click to collapse
The thing is, if it doesn't respond then how are you going to fix it...that's the huge problem.
Moved to General Q&A.
Have you tried another charger? With and without battery.
-- Sent from my TouchPad using Communities
rocketonp500 said:
This is my first post at XDA. I don't know if I am in the right section. Kindly move the post if required.
Problem
1) I had my Optimus One running CM9.
2) It made my phone slow. So, I flashed it back to CM7.
3) It had some problems, so i was foolish enough to move it back to Gingerbread instead of restoring to CM9.
4) This is where my phone started acting strange. It was getting into a boot loop.
5) I then tried to fix it using some tools I don't remember, but since then it has been dead.
The phone is dead. The phone won't turn on. Not even in emergency mode. No response when charger or USB is connected. It just wont turn on.
It was about 4 months ago when I bricked my phone and had lost hope. I have now known it's hard living without an android.
Please let me know how i can fix this and revive my bricked phone.
Some of you may have a good laugh reading this. But I already have tears in my eyes.:crying:
I dont remember what all i did to my phone in order to brick it. So, please help in whatever way you can.
Thanks to everyone in advance.
Click to expand...
Click to collapse
It's an LG phone right?.. I also agree to Repair at the service center of your phone.. I recommend that because it's hard bricked.. When I was a newbie and accidentally soft bricked my galaxy pocket (bootloop) I bring it to the samsung service center I thought it will coast some bucks but it's free, they just reformat my phone for One hour and it's now fixed.. but now I use Odin for reformatting my phone using stock firmwares..
dumeds away,
I assume you searched the forum already, but maybe you didn't try this yet:
http://forum.xda-developers.com/showthread.php?t=883314
Hope it helps.
try putting it into download mode and connecting to the computer and checking with odin.i
Reviving P500
krishneelg3 said:
The thing is, if it doesn't respond then how are you going to fix it...that's the huge problem.
Click to expand...
Click to collapse
Yes!! There is no way I guess.
post-mortem said:
Have you tried another charger? With and without battery.
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
Yes. I tried another chager, USB and stuff. My phone wont come up.
fozzyag said:
I assume you searched the forum already, but maybe you didn't try this yet:
http://forum.xda-developers.com/showthread.php?t=883314
Hope it helps.
Click to expand...
Click to collapse
I came across this thread. But, i cannot go into emergency mode. So, I am stuck.
aagampshah97 said:
try putting it into download mode and connecting to the computer and checking with odin.i
Click to expand...
Click to collapse
How to get into download mode? I dont really know if it would go into download mode.
Hmm , hopes are less but lets go on with the basics .
Did you try changing the battery ?
I don't think the download mode would work either but try doing the following :
Plug in the USB cable and wait for the charging screen to come on.
Now Press and HOLD the following Keys in the same order: Return Button, Volume Down Button, and the Power Button.
Let go off all the buttons when you first see the LG logo.
Then install cm9 again with odin .
If none works then you either have to go with a new phone or maybe a simple part of the phone has become dead . If it's under warranty get it replaced / repaired .

[Q] Nexus s Lifeless.. Help Me

Guy,
i have a nexus s, korean model, i put a custom firmware JB. the update was successful, i was able set-up everything
but after i restart it. it won't turn on, no charging, NO everything.
i try ubuntu linux still nothing. can you give me advice or a step by step
and whats the worst thing could happen to my nexus s. tnx.
navymyk said:
Guy,
i have a nexus s, korean model, i put a custom firmware JB. the update was successful, i was able set-up everything
but after i restart it. it won't turn on, no charging, NO everything.
i try ubuntu linux still nothing. can you give me advice or a step by step
and whats the worst thing could happen to my nexus s. tnx.
Click to expand...
Click to collapse
Hi
I dont want to take your hope...but if you have allready tried to:
Press button combo for bootloader, button combo for download mode...remove battery and nothing worked...no google logo at all
The PC didnt recognize the device ....same fastboot/adb...no charging sign..
So the display stays black...you have the same issue like me.
I have had same a few weeks ago..and some others too.
Only way out is send it to samsung for warranty-repair.
In my case the mainboard and the nand where changed because the´re messed up.
good luck
S.R.
shivasrage said:
Hi
I dont want to take your hope...but if you have allready tried to:
Press button combo for bootloader, button combo for download mode...remove battery and nothing worked...no google logo at all
The PC didnt recognize the device ....same fastboot/adb...no charging sign..
So the display stays black...you have the same issue like me.
I have had same a few weeks ago..and some others too.
Only way out is send it to samsung for warranty-repair.
In my case the mainboard and the nand where changed because the´re messed up.
good luck
S.R.
Click to expand...
Click to collapse
i have this phone as 2nd hand only, i went to samsung they say that they can't like use software because they don't know what model
i have, i already told them that it is a Korean model and blah blah, hopeless me.

Galaxy Tab 2 won't start

Hi!
I'm new to flashing and tried to install clearRom in my P3115. The problem is that after reboot, the tablet wont start!
If I tried to connect it to the pc, drivers is nos installed / recognized and the batery logo appears but never charges. It show as is it is empty.
I can´t start it neither or access download mode or CWR mode. Odin does not recognize it neither!
Please, help! It's like dead!
Thanks a lot! :good:
Explain exactly what you did, and maybe someone can help you further. Good luck.
Sent from my Rezound using Tapatalk 2
JeramyEggs said:
Explain exactly what you did, and maybe someone can help you further. Good luck.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the tip.
I just used Odin to flash clear Rom like explained here:
theandroidsoul cleanrom-custom-rom-for-galaxy-tab-2-10-1-guide/
Everything seems to be fine, but after restart nothing happened. I noted that if you plug the tablet to the usb port, it keeps looping the sound as when any usb is connected. Over and Over again.
It never starts, not even the Samsung logo. The only thing it does is, once plugged in, I can see the battery charge logo, but always empty.
Please, help!!
Thanks!
What kind of message do you get from Odin if you try to connect it and load a ROM? My tab was stuck also but I was able to get Odin load even when it looked like it was connecting.
jgfan1972 said:
What kind of message do you get from Odin if you try to connect it and load a ROM? My tab was stuck also but I was able to get Odin load even when it looked like it was connecting.
Click to expand...
Click to collapse
Hi jgfan!
It just worn´t work, I cant flash anything because i's like it never connects as the usb makes his connect / disconnect loop sound.
Odin never shows the ID:COM PORT rectangle as connected or colored!
Thanks for any tip.
Have you install the driver in your computer?
michaelzzz said:
Have you install the driver in your computer?
Click to expand...
Click to collapse
Hi Michaelzzz, I did!
I also installed Kies, but it's like a usb loop and never ends recognizin it!
I keep hearing the sound when you connect the usb over and over...
Not sure, what problem you face exactly.
This is what i understand, you get a battery logo while your device starts and wont boot up right? If yes, try these steps, might help you.
1. battery logo you get in the boot thats because, you have connected USB Cable to computer/Charger.
2. Make sure you have charge in battery so that while doing below steps, would be a problem.
3. Once you find, it has a enough battery charge you can disconnect the cable safely (If not place it for a wallcharger, untill the battery logo fills up the juice and you find it as charged completly)
4. While booting Press the POWER+VOLUME DOWN for Download mode.
5. Now connect your tablet to PC which has ODIN and sufficient drivers installed,
6. ODIN should detect to flash the ROM.
7. Download extact Firmwares from Sammobile site / from XDA links, which is suitable.
Hopefully it should bootup with no issues.
nagabushan.c said:
Not sure, what problem you face exactly.
This is what i understand, you get a battery logo while your device starts and wont boot up right? If yes, try these steps, might help you.
1. battery logo you get in the boot thats because, you have connected USB Cable to computer/Charger.
2. Make sure you have charge in battery so that while doing below steps, would be a problem.
3. Once you find, it has a enough battery charge you can disconnect the cable safely (If not place it for a wallcharger, untill the battery logo fills up the juice and you find it as charged completly)
4. While booting Press the POWER+VOLUME DOWN for Download mode.
5. Now connect your tablet to PC which has ODIN and sufficient drivers installed,
6. ODIN should detect to flash the ROM.
7. Download extact Firmwares from Sammobile site / from XDA links, which is suitable.
Hopefully it should bootup with no issues.
Click to expand...
Click to collapse
Dear nagabushan, thanks for your help!
I think the problem is battery related, cause the icon never fills up. It's like it cant charge batteries! The juice never even apears!
I'll leave it plugged in to the wall for a few our, and see what is going on.
I'll be back in a few hours!
Bootloader messed up. Sorry, only JTAG works with this.
jonttuv said:
Bootloader messed up. Sorry, only JTAG works with this.
Click to expand...
Click to collapse
Thanks jonttuv. Actually, after 6 hours, the battery juice is the same.
I'll check in the forum about this procedure.
If you already know anything, Can you please provide a good step by step to accomplish this?
Thanks in advance to all.
melbos said:
Thanks jonttuv. Actually, after 6 hours, the battery juice is the same.
I'll check in the forum about this procedure.
If you already know anything, Can you please provide a good step by step to accomplish this?
Thanks in advance to all.
Click to expand...
Click to collapse
This is just a guess, but i think that there is no JTAG unit(that is just plugged to the tablet and DOWNLOAD MODE ) There is a method that can be extremely dangerous.
This method is to open the tab, take the motherboard, find the correct pins and flash JTAG. I DO NOT TAKE RESPONSIBILITY FOR THIS METHOD NEITHER DO I SUPPORT IT!
The second method is to take it to the warranty. Download mode is not accessible so they can't tell if it's rooted, custom rom or anything like that. They will either send you a new device and voilá. That's it. Or they try to fix it. Google samsung galaxy tab 2 jtag. It will help you if you prefer the first option.

Categories

Resources