This is my first post at XDA. I don't know if I am in the right section. Kindly move the post if required.
Problem
1) I had my Optimus One running CM9.
2) It made my phone slow. So, I flashed it back to CM7.
3) It had some problems, so i was foolish enough to move it back to Gingerbread instead of restoring to CM9.
4) This is where my phone started acting strange. It was getting into a boot loop.
5) I then tried to fix it using some tools I don't remember, but since then it has been dead.
The phone is dead. The phone won't turn on. Not even in emergency mode. No response when charger or USB is connected. It just wont turn on.
It was about 4 months ago when I bricked my phone and had lost hope. I have now known it's hard living without an android.
Please let me know how i can fix this and revive my bricked phone.
Some of you may have a good laugh reading this. But I already have tears in my eyes.:crying:
I dont remember what all i did to my phone in order to brick it. So, please help in whatever way you can.
Thanks to everyone in advance.
rocketonp500 said:
This is my first post at XDA. I don't know if I am in the right section. Kindly move the post if required.
Problem
1) I had my Optimus One running CM9.
2) It made my phone slow. So, I flashed it back to CM7.
3) It had some problems, so i was foolish enough to move it back to Gingerbread instead of restoring to CM9.
4) This is where my phone started acting strange. It was getting into a boot loop.
5) I then tried to fix it using some tools I don't remember, but since then it has been dead.
The phone is dead. The phone won't turn on. Not even in emergency mode. No response when charger or USB is connected. It just wont turn on.
It was about 4 months ago when I bricked my phone and had lost hope. I have now known it's hard living without an android.
Please let me know how i can fix this and revive my bricked phone.
Some of you may have a good laugh reading this. But I already have tears in my eyes.:crying:
I dont remember what all i did to my phone in order to brick it. So, please help in whatever way you can.
Thanks to everyone in advance.
Click to expand...
Click to collapse
Repair
Sent from a powerful Ice Creamy Device
Reviving my bricked p500
Thanks!!! I kinda guessed nothing could be done. But would have loved a fix. Would have saved bucks!!!
rocketonp500 said:
Thanks!!! I kinda guessed nothing could be done. But would have loved a fix. Would have saved bucks!!!
Click to expand...
Click to collapse
The thing is, if it doesn't respond then how are you going to fix it...that's the huge problem.
Moved to General Q&A.
Have you tried another charger? With and without battery.
-- Sent from my TouchPad using Communities
rocketonp500 said:
This is my first post at XDA. I don't know if I am in the right section. Kindly move the post if required.
Problem
1) I had my Optimus One running CM9.
2) It made my phone slow. So, I flashed it back to CM7.
3) It had some problems, so i was foolish enough to move it back to Gingerbread instead of restoring to CM9.
4) This is where my phone started acting strange. It was getting into a boot loop.
5) I then tried to fix it using some tools I don't remember, but since then it has been dead.
The phone is dead. The phone won't turn on. Not even in emergency mode. No response when charger or USB is connected. It just wont turn on.
It was about 4 months ago when I bricked my phone and had lost hope. I have now known it's hard living without an android.
Please let me know how i can fix this and revive my bricked phone.
Some of you may have a good laugh reading this. But I already have tears in my eyes.:crying:
I dont remember what all i did to my phone in order to brick it. So, please help in whatever way you can.
Thanks to everyone in advance.
Click to expand...
Click to collapse
It's an LG phone right?.. I also agree to Repair at the service center of your phone.. I recommend that because it's hard bricked.. When I was a newbie and accidentally soft bricked my galaxy pocket (bootloop) I bring it to the samsung service center I thought it will coast some bucks but it's free, they just reformat my phone for One hour and it's now fixed.. but now I use Odin for reformatting my phone using stock firmwares..
dumeds away,
I assume you searched the forum already, but maybe you didn't try this yet:
http://forum.xda-developers.com/showthread.php?t=883314
Hope it helps.
try putting it into download mode and connecting to the computer and checking with odin.i
Reviving P500
krishneelg3 said:
The thing is, if it doesn't respond then how are you going to fix it...that's the huge problem.
Click to expand...
Click to collapse
Yes!! There is no way I guess.
post-mortem said:
Have you tried another charger? With and without battery.
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
Yes. I tried another chager, USB and stuff. My phone wont come up.
fozzyag said:
I assume you searched the forum already, but maybe you didn't try this yet:
http://forum.xda-developers.com/showthread.php?t=883314
Hope it helps.
Click to expand...
Click to collapse
I came across this thread. But, i cannot go into emergency mode. So, I am stuck.
aagampshah97 said:
try putting it into download mode and connecting to the computer and checking with odin.i
Click to expand...
Click to collapse
How to get into download mode? I dont really know if it would go into download mode.
Hmm , hopes are less but lets go on with the basics .
Did you try changing the battery ?
I don't think the download mode would work either but try doing the following :
Plug in the USB cable and wait for the charging screen to come on.
Now Press and HOLD the following Keys in the same order: Return Button, Volume Down Button, and the Power Button.
Let go off all the buttons when you first see the LG logo.
Then install cm9 again with odin .
If none works then you either have to go with a new phone or maybe a simple part of the phone has become dead . If it's under warranty get it replaced / repaired .
Related
Hey guys found a way to unbrick Samsung droid charge and revert back to stock.
1. Download and install Odin found here ( http://forum.xda-developers.com/showthread.php?t=1085190 ) unzip and open
2.Download this file and unzip ( CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5.7z) from here ( http://www.multiupload.com/6WJ2SFUKO6 ) or original thread where i found this file is from here ( http://androidflip.com/android-2-3-...are-on-samsung-droid-charge-installing-guide/ )..
In case it fails and it just keeps failing try this other file is not stock but it is 2.3.4 and it works great here is a link to find the file ( http://www.megaupload.com/?d=5PUB8UY7 ) and it also find a mirror download here ( https://rapidshare.com/#!download|9...ar.md5.7z|391371|RapidPro expired. (34fa3175) ) i tried it guys and it does work.
3. set phone to download mode, do this by taking battery of phone, plug phone into computer and hold Volume down, a Yellow triangle with a working android will appear.
4. Click on odin you will see your phone come up under ID:COM, now do not click on anywhere but on PDA thats where you will have to find the file you downloaded on step 2 and make sure is the unzipped file. once u find it, click on open then start.
5. Be patient this can take up some time, once is done the box will turn green and say pass, at this time your phone will no longer have the Yellow triangle and you can unplug and place the battery back in and turn phone on.. once again be patient when turning phone on it will take a little while to complete.
i tried this and it does work, my Droid charge was bricked and now it works.
Thanks to xda-developers where i was able to find odin and also thanks to androidflip.com where i was able to find the Droid Charge stock rom to flash it back using odin.
Hope this helped everyone needing help.
Thanks for posting this, but it isn't the end-all-be-all. I tried to recover from a bad flash using this method and it failed.
I got the error message seen in this post:
http://forum.xda-developers.com/showthread.php?t=1111486
The method in that post failed to help me recover.
I finally found this method (which is linked much later on in the thread above):
http://www.mydroidworld.com/forums/...harge-full-factory-tar-flashing-software.html
and it worked perfectly for me.
So, if the first method from the OP fails, you have the Samsung PST flash utility that may help.
Yea i was also getting that message at first but it worked fine, but i also ended up installing the 2.3.4 so it worked out well.. was able to fix and unbrick my Droid charge.
I think this is already in a thread here...
Sent from my Droid Charge running GummyFroyo 1.9.1
We've known about this for a while, but thanks. There's a "How to fix your phone" thread in development which also includes a pit file you use in combination with that .md5
Also, you were probably just bootlooped, not bricked.
Thanks Guys for the input. I thought i was bricked, looked to me i was bricked... But i did this steps and was able to fix my droid charge... I did bot know there was a threath about this on here.. just trying to help people fix their phone if this can be helpful for them that's good.
Sent from my SCH-I510 using XDA App
I bricked my droid charge
Can I just pay somone to have it unbricked wthout paying $100 +? I dont trust myself to unbrick the device.
jonnyb81 said:
Can I just pay somone to have it unbricked wthout paying $100 +? I dont trust myself to unbrick the device.
Click to expand...
Click to collapse
look in the dev section for the 'Unbrickable Mod', theres a guy who'll do it for 40 bucks I think
I thought being bricked meant not being able to get into even Download Mode.
Sent from my SCH-I510 using xda premium
DirgeExtinction said:
I thought being bricked meant not being able to get into even Download Mode.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
yeah but even then its not completely hopeless, there are USB jigs that can force it into download mode and this 'Unbrickable Mod' thing that requires tinkering with the internals which is supposedly fool proof
Sent from my SCH-I510 using XDA App
I've seen the term "bricked" thrown about a lot so I'm going to clarify some things.
First of all, there are two types of brick, a soft-brick and a hard-brick.
Soft-brick, that's what people often say when they have a boot-loop. This isn't a brick in the traditional sense. It's not really a brick, you can still recover it if you're at this stage. As long as you can get to the screen with the big yellow triangle you're not bricked at all and you can recover it.
Hard-brick, this is a true brick. This is what happens when the phone will not do anything. Won't show the Samsung logo, won't show the yellow triangle screen, won't do anything at all. At this stage, it might as well be a brick because you can't do anything to it. JTAG should be able to reload the bootloader and the base firmware.
trparky said:
I've seen the term "bricked" thrown about a lot so I'm going to clarify some things.
First of all, there are two types of brick, a soft-brick and a hard-brick.
Soft-brick, that's what people often say when they have a boot-loop. This isn't a brick in the traditional sense. It's not really a brick, you can still recover it if you're at this stage. As long as you can get to the screen with the big yellow triangle you're not bricked at all and you can recover it.
Hard-brick, this is a true brick. This is what happens when the phone will not do anything. Won't show the Samsung logo, won't show the yellow triangle screen, won't do anything at all. At this stage, it might as well be a brick because you can't do anything to it. JTAG should be able to reload the bootloader and the base firmware.
Click to expand...
Click to collapse
well that's bootlooping not a soft brick, a soft brick would be when you flash something wrong or stop odin mid flash or flash something corrupted then get that little "phone --- ! --- pc" thing (done it twice myself) but yes it is recoverable
permabrick is indeed when it won't power on or do anything, it is a paperweight
hard brick is usually when it won't go into download mode but may still boot up or even go into recovery (probably just bootloops though), however as I mentioned in my last post none of these situations are completely hopeless
blazing through on my 4G Droid Charge
anoninja118 said:
yeah but even then its not completely hopeless, there are USB jigs that can force it into download mode and this 'Unbrickable Mod' thing that requires tinkering with the internals which is supposedly fool proof
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
can anyone help me out to finding diy on how to do this ^ .... cause i cant get my phone to go into download mode nor will it power on
DaRobsterr said:
can anyone help me out to finding diy on how to do this ^ .... cause i cant get my phone to go into download mode nor will it power on
Click to expand...
Click to collapse
this is supposed to be a guide I think: http://forum.xda-developers.com/showthread.php?t=1245391
blazing through on my 4G Droid Charge
DaRobsterr said:
can anyone help me out to finding diy on how to do this ^ .... cause i cant get my phone to go into download mode nor will it power on
Click to expand...
Click to collapse
You're supposed to put in the battery for it to turn on....
But seriously, there's a thread for it in the dev section, but just hope you're good at soldering.
Sent from my Droid Charge running Infinity Beta
There always a way to unbrick the charge, it's all thru the development forum. I have had several android phones and have bricked all off them and recovered all them- htc incredible, htc wildfire, droid x and the charge
Sent from my HUMBLE by Danalo1979 using XDA App
kvswim said:
You're supposed to put in the battery for it to turn on....
But seriously, there's a thread for it in the dev section, but just hope you're good at soldering.
Sent from my Droid Charge running Infinity Beta
Click to expand...
Click to collapse
I tried everything battery in and out to get into download mode. Ended up finding a post somewhere and read that i should try a usb jig; which is why im guessing if you asked if i was good at soldering. To answer that question yes i am good at it. But i called verizon and they ended up sending me a replacement. Thanks for the guys who tried to help me out.
While I was flashing a ROM (Synergy1.3), my wife decided to move my phone to another table. When i looked at it a few minutes later,the screen was blank. Now it wont turn on at all. I had used that particular ROM before without any problems. My battery was at 90% when i started to flash. I have a terrible feeling i am bricked. Any ideas?
goralla said:
While I was flashing a ROM (Synergy1.3), my wife decided to move my phone to another table. When i looked at it a few minutes later,the screen was blank. Now it wont turn on at all. I had used that particular ROM before without any problems. My battery was at 90% when i started to flash. I have a terrible feeling i am bricked. Any ideas?
Click to expand...
Click to collapse
You take out the battery..then try it?
Dominazn said:
You take out the battery..then try it?
Click to expand...
Click to collapse
yes,also tried charging it from wall charger ans USB. I get this error when plugging into USB (QHSUSB_DLOAD)
It's hard to brick a phone. Worst case, boot into download mode and Odin up the stock image.
If you can't access Download mode, you've most likely bricked as any research I've done points to it. If you've got insurance you can pay the premium, or send it to one of the JTAG services for repair (such as MobileTechVideos).
Just don't leave or touch the phone next time when you're flashing!
With my case it's hard to hit the buttons for recovery and download. I created across to get to them. Not what you're wanting to here. But here's a tip: if you can get adb to recognize your phone but can't use buttons to get into download mode you can "adb shell" and then "reboot download". That will cause the phone to boot download/Odin mode. Hopefully that will work and you can flash back to stock.
Sent from my SCH-I535 using xda app-developers app
The phone will not power up in any way at all. I am in the 5th stage of the grieving process. Back to my Tbolt and hope Samsung honors the warranty.
goralla said:
The phone will not power up in any way at all. I am in the 5th stage of the grieving process. Back to my Tbolt and hope Samsung honors the warranty.
Click to expand...
Click to collapse
They won't honor it with a rooted phone or flash count pass 0
Sent from my Verizon Samsung Galaxy S3 4G LTE
If you cant get to download mode or get adb to recognize when properly set up you do probably have a brick. What's happening to you with the warning happened to my friend on Sprint while accidentally flashing a ROM for a different phone. What he had to do was send it in to MobileTechVideos and got it repaired for around 60$. Samsung/Verizon wont likely fix them under warranty.
My only question is if you indeed were flashing synergy, how did a system ROM brick a device. o_0 And hell even if it was another phones ROM wouldn't our locked bootloader deny overwriting?
enomele said:
If you cant get to download mode or get adb to recognize when properly set up you do probably have a brick. What's happening to you with the warning happened to my friend on Sprint while accidentally flashing a ROM for a different phone. What he had to do was send it in to MobileTechVideos and got it repaired for around 60$. Samsung/Verizon wont likely fix them under warranty.
My only question is if you indeed were flashing synergy, how did a system ROM brick a device. o_0 And hell even if it was another phones ROM wouldn't our locked bootloader deny overwriting?
Click to expand...
Click to collapse
I also accidentally flashed a rom for a different phone and am considering sending it to MobileTechVideos. Your friend had good success with them fixing his phone?
-Purk
I think this might also work for you, if the battery charging icon comes on while your charging it then this might work. When you have it connected and the charging icon comes on put it in download mode(do not unplug it until your in download mode). Then use odin to flash it back to stock. It happen to me ones and when i did this it work for me, so i don't know if this will work for you. (Sorry for my grammar)
Good Morning Everyone, This is my first post. I try to never post just read. I have read and read but to no avail. I have a AT&T Samsung infuse 4g. it WAS running froyo. What I mean by WAS, is that I was trying to install the modded 3e recovery so I could install clockworkmod recovery. During this process I read that I need to mount the /system partition as read/write I did this using the tool box that was created by some of your developers. It is awsome by the way. Well I did that and put a new recovery file in the /bin but it did not work as the website claimed so I thought well I should delete the old one. Bad Idea when I did the reboot it stopped me at the samsung screen. I tried to hard reboot it pulled the battery talked to it with a really kind voice and nothing happend. So I decided to use GEG's Ultimate Unbrick because this has worked for me in the past when i have messed up. So I put my phone into download mode and started the process with Odin. And here is where it gets bad.... one of my children was talking with me during the process and he decided to unplug my phone.. AHH EFFFFFF! I thought. Well when I tried to fix it it was to late. My phone will no longer turn on or even pretend to start. I am broke and cannot afford a new phone plus my wife would kill me seeing we have 6 children and it is right before christmas if I came home with a new galaxy note 2 Please Please can any one help a desperate dad with a busted Samsung Infuse. Thank you all for this awesome website that has taught me alot.. Please dont kill me for posting something someone has already posted because I could not find anything that was helpful for this situation with my phone.
Xda is awesome!
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
MerkTheMedia said:
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
Click to expand...
Click to collapse
Awesome! Glad you got your phone functioning again. Being persistent in searching and reading and trying to find answers usually results in good outcomes. :thumbup:
Sent from a de-Funkt Infuse
Okay now I have really done it this time. So I worked a 18 hour day and thought well instead of getting some rest i will install Gingerbread on my infuse. To make a long story short while I was using odin to install it paused for a long time at the format stage, so I thought well I will just turn it off even though it says not to and then.....well it did a rainbow colored screen I tried to figure it out last night with no luck. So I have been working on it all morning the rainbow screen is gone but now it just goes from black to all white screen. I have tried every possible way to get into download mode with no luck. Am I screwed or what? Does anyone have any suggestions. If I am out of luck does anyone know if bestbuy's warrenty covers rooted phones that are [email protected] bricked?
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
saxk said:
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
MerkTheMedia said:
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
Click to expand...
Click to collapse
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
qkster said:
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
Click to expand...
Click to collapse
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
MerkTheMedia said:
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
Click to expand...
Click to collapse
You're too kind, Merk.
I'm not sure what happened to your phone. The Infuse is pretty sturdy. Flashing should not cause much of an issue. The faulty power button and corrosion of the circuit board were the most I've seen reported.
This is what I use to force the phone into download mode:
http://www.ebay.com/itm/Micro-USB-J...665854?pt=PDA_Accessories&hash=item3f201c4f3e
Once in DL mode, it's a matter of choosing Odin or Heimdall to bring it back to stock.
One other thought, try a different battery as well.
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
Well im going to give it a shot I still have the old infuse I tried to make my own jig which didnt work for me so I took it into bestbuy and they gave me a brand new phone and in all of the hustle and bustle of christmas shopping going on around me they did not take my bricked infuse so now I have a spare to tinker with. Thanks I will definately give it a try and report with my findings
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
okay I tried but that didnt work either. Can you go ahead and explain "exactly" what you did maybe it will work!
Thanks again for everyones help!
Ok first I downloaded the unbrick package from this website. I downloaded the drivers for the infuse (not sure exactly where I got them from). I would just Google them. Then I tried every USB port on the laptop. Then switched cables and it finally worked. Opened Odin 1.7 and clicked pit, then flashed. Then I unplugged it, took the battery out and put back in and tried to boot. Didn't work. Then flashed PDA. Did same steps as before and still didn't work. Then flashed phone file. Tried to boot and still didn't work. Then I flashed all 3 files at once. Also, not sure if you know or not but the only thing that should be checked in Odin is f: reset time. Then the phone booted up and it stayed on at&t screen for about 5 minutes then finally came on. Also, you could also try to flash this other PDA file on there. I have the link saved on my computer but I'm not at home right now so I'll have to post that later. In easier steps
1. Put phone in Download mode and plug into pc.
2. Run Odin as admin and only thing checked is f reset time.
3.Flash pit then try to boot
4. Flash PDA then try to boot
5. Flash phone then try to boot
6. Flash all three at once
7. After flash While in download mode, unplug USB cable, take battery out and put back in
8. Reboot phone.
Sorry everything is all jumbled, I just got back to my home state from a road trip and I'm running on about 6 hours of sleep in 3 days. I hope this works for you. Also, there is a video on YouTube of a unbrick service for the phone. Its $30. I personally would not try it but its just an idea if you would want to.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had the issue where I had the phone, the exclamation mark, and the computer symbol (The Black Screen of Death: Imaged Attached), that is all it would show when I turned it on. I thought the phone was completely bricked until I did the following, which put it into a hidden download mode and allowed ODIN to recognize it. I DID NOT NEED TO BUY A USB JIG.
1. Make sure you have Odin already downloaded and ready to go.
2. Remove the SIM and SD Cards
3. Load up Odin and make sure it is up and running on the computer. DO NOT plug your phone into the computer yet.
4. Reinstall the Battery and plug the phone to the USB cable to the computer.
5. Hold down both Volume keys and then push and hold the power button
6. Keep holding the buttons until it goes to black, KEEP HOLDING A SECOND TIME until it goes to black and the icon comes back on.
7. Now when it goes Black the second time release the Power button only.
8. You should now be in Download mode. The key is holding the buttons, letting it go to black once, and then letting it go to black again, and then release only the power button while your fingers are still on the volume buttons.
9. Now Odin should recognize the phone on a Com port (turn yellow).
10. You are now ready to return it back to stock.
I hope this helps!
did you ever get your infuse fixed man?
Sent from my SAMSUNG-SGH-I747 running CM10 JB 4.1.2 using xda premium
Yes I tried to make my own jig but my fat shaky hands could get the end of the wires to hit the correct contacts so I ordered one online and that got me into download mode! Now I'm running jelly bean! Thanks to everyone that helped out I love you guys!!!! PS. Don't skip backing up your efs folder!! Unless you want a headache. But with all my problems it has taught me a lot. My number one tip is to read read read there is always an answer! Thanks again everyone! Always hit the thanks button its the least we can do for all of these brilliant hard working developers.
Sent from my SGH-I997 using xda app-developers app
Alright i got 6 hours before tmbobile store opens and i can HOPEFULLY get an exchange, but not banking on it. btw im new to rooting so i wasnt familiar with the process, but regardless i have hard bricked my NEXUS 5. Title says the problem. I followed wwjoshdew's guide to rooting on youtube, and rooted successfully. But i could'nt for the life of me figure out how to create nandroid. I ended up realizing i didnt download cmw recovery mode and downloaded it from the play store. the app took me to a button that said flash recovery and i hit it and my phone asked for permission from unknown source, i hit ok and it shut down, on 70% battery life. Not turning on please help
Try to boot the phone into bootloader mode. Just hold volume down and the power button. From there try to cycle to recovery. You use your volume down to cycle through the options and power but as select. If you can boot into recovery and have that successfully installed then you can erase your phone and try to power it on from there. If you didn't successful install the custom recovery then you'll have the standard Android recovery. You can erase everything from that too.
These phones are hard to brick and not be able to fix it.
Sent from my Nexus 5 using XDA Premium 4 mobile app
ruben8448 said:
Try to boot the phone into bootloader mode. Just hold volume down and the power button. From there try to cycle to recovery. You use your volume down to cycle through the options and power but as select. If you can boot into recovery and have that successfully installed then you can erase your phone and try to power it on from there. If you didn't successful install the custom recovery then you'll have the standard Android recovery. You can erase everything from that too.
These phones are hard to brick and not be able to fix it.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Doesn't turn on dude. No matter what. I am new to roms but i know what a hard brick is.
You should really read the guides and stickied threads at the top of these forums. The guides are very noob friendly and you wouldn't have bricked your phone. There's one to reset your device to stock as well. There's really no need for this thread and on top of that there is a sticky that says no questions in the General forums.
Sent from my Nexus 5 using Tapatalk
Determine your phone is actually off. Plug your phone into charge, if a battery sign appears in the middle of the screen then your phone is off.
If your phone is off, hold down the volume down button with the power button to start the bootloader, press volume down twice and press the power button to enter recovery.
If your screen remains black and doesn't show a battery logo, hold the volume up, volume down and power buttons at the same time for a minute, then let go and hold down the power button. Which should hopefully start your phone.
FuMMoD said:
You should really read the guides and stickied threads at the top of these forums. The guides are very noob friendly and you wouldn't have bricked your phone. There's one to reset your device to stock as well. There's really no need for this thread and on top of that there is a sticky that says no questions in the General forums.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
You should have been around long enough to know that when newbies break their new toys they go nuclear and dismiss all the information around them.
BNNEBULA said:
Alright i got 6 hours before tmbobile store opens and i can HOPEFULLY get an exchange, but not banking on it. btw im new to rooting so i wasnt familiar with the process, but regardless i have hard bricked my NEXUS 5. Title says the problem. I followed wwjoshdew's guide to rooting on youtube, and rooted successfully. But i could'nt for the life of me figure out how to create nandroid. I ended up realizing i didnt download cmw recovery mode and downloaded it from the play store. the app took me to a button that said flash recovery and i hit it and my phone asked for permission from unknown source, i hit ok and it shut down, on 70% battery life. Not turning on please help
Click to expand...
Click to collapse
You bricked a Nexus?
Hold down Volume Down, Up, and Power to get into fastboot mode. Restore from Factory Image.
Normally, to root a nexus, I fastboot Team Win Recovery Project.
Anyways what you did simply could not HARD BRICK the phone.
zeekiz said:
You should have been around long enough to know that when newbies break their new toys they go nuclear and dismiss all the information around them.
Click to expand...
Click to collapse
Seriously lol. Even though the guides are right there in their faces.
Sent from my Nexus 5 using Tapatalk
HELP SOS
FuMMoD said:
You should really read the guides and stickied threads at the top of these forums. The guides are very noob friendly and you wouldn't have bricked your phone. There's one to reset your device to stock as well. There's really no need for this thread and on top of that there is a sticky that says no questions in the General forums.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
My Nexus5 doesn't flash the Led light or enter bootloader and software . I was flashing the based CM kernel and i followed the instructions nicely, while using TWRP Recovery i pressed reboot system after the flash and the phone suddenly died. I connected it to the PC and the installing drivers popup appeared and it didn't install them, problem(QHSUSB_BULK) it only appeared once. And since that, phone is dead. PLEASE HELP!!!!
Yazan Abzakh171 said:
My Nexus5 doesn't flash the Led light or enter bootloader and software . I was flashing the based CM kernel and i followed the instructions nicely, while using TWRP Recovery i pressed reboot system after the flash and the phone suddenly died. I connected it to the PC and the installing drivers popup appeared and it didn't install them, problem(QHSUSB_BULK) it only appeared once. And since that, phone is dead. PLEASE HELP!!!!
Click to expand...
Click to collapse
Do you have a link to the kernel you flashed? I think you done bricked it good.
Were you using this method?
http://www.youtube.com/watch?v=w3beFx-3Ic4
If yes,I think then all Nexus 5 users should be warned about CF's autoroot issues,because I see more and more topics related to this issue.
Simonna said:
Were you using this method?
http://www.youtube.com/watch?v=w3beFx-3Ic4
If yes,I think then all Nexus 5 users should be warned about CF's autoroot issues,because I see more and more topics related to this issue.
Click to expand...
Click to collapse
I don't believe the issues you're seeing, appears to be failed emmc, is related to chain fire's auto root. Cf is probably the most popular method to root and it's a coincidence. I've seen these failures with other root methods too.
I think the op flashed a kernel not for his device.
jd1639 said:
I don't believe the issues you're seeing, appears to be failed emmc, is related to chain fire's auto root. Cf is probably the most popular method to root and it's a coincidence. I've seen these failures with other root methods too.
I think the op flashed a kernel not for his device.
Click to expand...
Click to collapse
I am not a developer so bear with me. I'm just a guy in mpls with a completely stock N5 from Google Play that encountered similar issue as the original post. There was no damage or water issue, or other problem prior to going dead. It had about 50% battery and maybe 15 minutes after reading an email it was dead when I looked at it again. It just simply turned off while in my pocket. I could not get it to power on or enter bootloader or a recovery screen. After a week of trying to charge via USB and the original wall charger and countless attempts to hold power and volume buttons without success, I decided to pop the back off and disconnected the battery. I put it back together, but that made no difference either. Google play will send me a new phone, but I'd like to get it fired up and extract the last week or so of pics. Any ideas? Again, I am a complete noob and this 3 month old phone has not been modified in any way, other than auto updates from Google play. Thanks for any assistance or guidance.
elf1967 said:
I am not a developer so bear with me. I'm just a guy in mpls with a completely stock N5 from Google Play that encountered similar issue as the original post. There was no damage or water issue, or other problem prior to going dead. It had about 50% battery and maybe 15 minutes after reading an email it was dead when I looked at it again. It just simply turned off while in my pocket. I could not get it to power on or enter bootloader or a recovery screen. After a week of trying to charge via USB and the original wall charger and countless attempts to hold power and volume buttons without success, I decided to pop the back off and disconnected the battery. I put it back together, but that made no difference either. Google play will send me a new phone, but I'd like to get it fired up and extract the last week or so of pics. Any ideas? Again, I am a complete noob and this 3 month old phone has not been modified in any way, other than auto updates from Google play. Thanks for any assistance or guidance.
Click to expand...
Click to collapse
So, your phone doesn't turn on at all?
jd1639 said:
I don't believe the issues you're seeing, appears to be failed emmc, is related to chain fire's auto root. Cf is probably the most popular method to root and it's a coincidence. I've seen these failures with other root methods too.
I think the op flashed a kernel not for his device.
Click to expand...
Click to collapse
Correct. No symbols, no battery icon, no vibrate, etc.
elf1967 said:
Correct. No symbols, no battery icon, no vibrate, etc.
Click to expand...
Click to collapse
I'm afraid there's nothing you can do. It would have to at least get into recovery or bootloader to have a prayer.
jd1639 said:
I'm afraid there's nothing you can do. It would have to at least get into recovery or bootloader to have a prayer.
Click to expand...
Click to collapse
Thanks - was just hoping it was not a hardware failure given the posts about difficulty bricking N5. Any chance if I bought a new battery that came charged it would fire up or replacing the motherboard an option?
p.s. I am not the original poster so not sure if I ticked someone off or not, sorry if I did. Just looking for assistance
elf1967 said:
Thanks - was just hoping it was not a hardware failure given the posts about difficulty bricking N5. Any chance if I bought a new battery that came charged it would fire up or replacing the motherboard an option?
p.s. I am not the original poster so not sure if I ticked someone off or not, sorry if I did. Just looking for assistance
Click to expand...
Click to collapse
It sure sounds like a hardware failure. Doubt a different battery would help. And don't worry about being the original op. This thread is old
jd1639 said:
It sure sounds like a hardware failure. Doubt a different battery would help. And don't worry about being the original op. This thread is old
Click to expand...
Click to collapse
I get the unknown device driver when hooked up USB to computer (QHSUSB_BULK). Think it is worth waiting a few weeks prior to returning it to see if there is a way to access the flash memory via a driver download? Searches for help showed similar unknown driver problem workable on samsung and HTC last year (QHSUSB_DLOAD)
elf1967 said:
I get the unknown device driver when hooked up USB to computer (QHSUSB_BULK). Think it is worth waiting a few weeks prior to returning it to see if there is a way to access the flash memory via a driver download? Searches for help showed similar unknown driver problem workable on samsung and HTC last year (QHSUSB_DLOAD)
Click to expand...
Click to collapse
No, you won't be able to. The memory doesn't mount like a sd card would. For the future use something like drop box or Google drive too backup your photos as you take them.
Hey i have 2 phones that not working i will be more than happy if you help me. start with the first one.
I found Galaxy S2 and tried to torn it on Not Working. i tried to charge it Still Dont working. when i plug it to my computer it didn't show nothing.
I have a battery charger so i pluged it in charge the battery put back and still, Not working. i tried Other Battery and again the same.
What can i do. what part maybe dont work or you have some idea. i dont want to buy new moterboard maybe there is a solution?
I have an Old galaxy S1 ( i9000)
i rooted him and all was Just fine. and one day it's like all deleted. the phone is charging. ( but not showing nothing in my computer screen)
and it's stack on the Galaxy Logo when you torn it on. i tried to do Factory reset But same problem. how i can delete the room and install the original Rom of it.
?
Hi,
I think your phone is bricked.
If it can show anything on the screen. Try also recovery and download mode. Your phone is soft bricked. There are lots of guides on the internet to unbrick your device.
If nothing is happening using any key combination your phone is dead.
thank you
thank you. but there is no key that helping. its not torn on... how i know what part i need to change?
supergerrit said:
Hi,
I think your phone is bricked.
If it can show anything on the screen. Try also recovery and download mode. Your phone is soft bricked. There are lots of guides on the internet to unbrick your device.
If nothing is happening using any key combination your phone is dead.
Click to expand...
Click to collapse
Oren144134 said:
thank you. but there is no key that helping. its not torn on... how i know what part i need to change?
Click to expand...
Click to collapse
Try to put your phone into the download mode (google for it). If it is possible to put your phone into the download mode, you can flash the stock ROM for your device again using Odin. Just look at google for some guides to do this.
If you nothing is working and you are sure the battery is charged. There is nothing you can do about is...
Hope this is helpful.