[Q] Boot Loop HELP!! - Galaxy Tab 7.7 Q&A, Help & Troubleshooting

my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!

alvin_vii said:
my p6800 went into a bootloop 2 days ago, ive done flashing according to what ive found in the forum, 3 parts firmware (with and without boot.bin and sbl.bin) , CWM etc.. i cant check if i have faulty emmc as i cant get into recovery mode using the button combo so i cant wipe anything. it jus show me and empty battery logo with a circle inside. i left it to charged for at least an hour but still i cant get into recovery. though i can get into download mode. can anyone help me? thanks in advance!
Click to expand...
Click to collapse
Try reflash original HC firmware. For me worked

yep, best bet is to reflash with original HC then format/wipe using default wiper in the recovery menu.
I also tried flashing an official ICS directly to a bootloop stricken device and it works too

Bootloop Problem
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..

ginoboyz said:
hi guys..
My P6800 also experienced this boot loop last week. My firmware is stock ICS non-rooted. I dont want to wipe data while in ICS so I reflashed my tab with stock Honeycomb using Odin. But after flashing, the tab was still stuck at the Samsung logo. I wanted to wipe data in recovery but when I press the Power + Volume Up button, the screen initially goes to the recovery screen for a few seconds and displays:
#MANUAL MODE#
Updating application...
then after a few seconds, the tab will reboot again and will be stuck at the Samsung Logo. I dont know what to do anymore. Im still able to go to the download mode though. (Power + Volume down)
Any suggestions?
Also now im not able to turn off the tab. Its still stuck at the Samsung logo. And when I try to plug and remove the charger, the tab is stuck at the battery symbol.
Help please..
Click to expand...
Click to collapse
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.

alvin_vii said:
ive tried e original HC n ICS firmware bt i still cant tk it out of bootloop.. ive flashed many androids b4 bt this one really gt me stumped, so i actually dumped it.
Click to expand...
Click to collapse
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?

ginoboyz said:
thanks for your suggestion but i love this tab and i wont dump it.
Maybe others could help me. Anyone?
Click to expand...
Click to collapse
did you try the XXLA3 ATO firmware? 3 files with ATO .pit files?

Don't easy try to flash with pit file,it's very danger and will destroy your emmc.try to flash it with the can over Odin in download mode
Sent from my GT-P6800 using xda app-developers app

Related

Galaxy Tab 7.0 Plus GT-P6200 hang logo.

i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.
Thread moved to General.
I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!
successfully done p 6200
Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!
ive also had the same problem duno wut to do anymore
Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck
i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!
CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app

[Q] Having issues trying to get back to stock

Ive been using the thread to Odin back to stock as im getting a replacement phone in a few days. Followed everything correctly, but Ive been getting a boot loop between the green android guy and the white Samsung startup logos. Redid the process in odin and now im getting "firmware upgrade encountered an issue, please select recovery mode in Kies and try again" when I go to download mode. i know I have a saved Nandroid backup on my SDcard, I just cant get to it. I also have mini Kies installed on my computer if there is a way to fix it thru that. I cant figure out how to get into recovery mode either. If anyone can help it would be greatly appreciated! Im just trying to get my phone working until my replacement is here.
I did Odin again, but now im stuck in a boot loop between the greenm android guy and the white samsung startup screens.
itsLYNDZ said:
Ive been using the thread to Odin back to stock as im getting a replacement phone in a few days. Followed everything correctly, but Ive been getting a boot loop between the green android guy and the white Samsung startup logos. Redid the process in odin and now im getting "firmware upgrade encountered an issue, please select recovery mode in Kies and try again" when I go to download mode. i know I have a saved Nandroid backup on my SDcard, I just cant get to it. I also have mini Kies installed on my computer if there is a way to fix it thru that. I cant figure out how to get into recovery mode either. If anyone can help it would be greatly appreciated! Im just trying to get my phone working until my replacement is here.
I did Odin again, but now im stuck in a boot loop between the greenm android guy and the white samsung startup screens.
Click to expand...
Click to collapse
That's because you had to factory reset and erase all data before flashing to stock. I had the same issue when flashing from dk4 to stock to lf4
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
So how do I get my phone working again? Its stuck in a bootloop after following the directions for Odin back to stock thread
itsLYNDZ said:
Ive been using the thread to Odin back to stock as im getting a replacement phone in a few days. Followed everything correctly, but Ive been getting a boot loop between the green android guy and the white Samsung startup logos. Redid the process in odin and now im getting "firmware upgrade encountered an issue, please select recovery mode in Kies and try again" when I go to download mode. i know I have a saved Nandroid backup on my SDcard, I just cant get to it. I also have mini Kies installed on my computer if there is a way to fix it thru that. I cant figure out how to get into recovery mode either. If anyone can help it would be greatly appreciated! Im just trying to get my phone working until my replacement is here.
I did Odin again, but now im stuck in a boot loop between the greenm android guy and the white samsung startup screens.
Click to expand...
Click to collapse
This issue only occured when you uncheck Auto reboot in Odin. Try Odin again with Auto reboot checked
If you getting an boot loop, do exactly what I've done in Odin thread
If you get a boot loop All you do is boot in stock recovery and wipe data
Sent from my SGH-T769 using xda premium
snoopy1e11 said:
If you get a boot loop All you do is boot in stock recovery and wipe data
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Can't go to stock recovery in this case. This issue only occoured when Odin to stock ROM after using/flashing custom ROM that you forgot to format system or clean data. I've run into this problem before
It looks like after all this, Titanium Backup's backup was erased. I do have a Nandroid saved on my SDcard. Is there a way to pull everything from that? When I go to CWM and try to do a Nandroid, it says there isnt anything there. But When I connect to my computer, I can see the saved backup. I have been able to pull a few backed up apps off the Nandroid backup, but only certain ones or it says batch restore failed. Im wonder how it can see the Nandroids, but CWM cant? They're saved on my SDcard.
Is there another way Titanium Backup saves backups that I could possibly get to them? Im really trying to figure this out before my replacement phone gets here in a few days. I did backup everything, Im just having a difficult time restoring after the numerous problems Ive had thanks to Tmobile's "troubleshooting"
What are you currently running? If you are back to stock titanium won't function correctly as you have to be rooted. But since you mentioned cwm I wasn't sure.
Sent from my SGH-T769 using Tapatalk 2
Im just on stock but I am rooted. I just dont know where all my backups went after the bootloop and issues with reverting to stock after Tmobilr screwed up my phone trying to figure out why I kept getting "Call Ended" when trying to dial out.
Where is your nandroid backup currently located?
Sent from my SGH-T769 using Tapatalk 2
On my external SDcard/clockwork mod/backup/ whatever the date was.
Seems normal. Not sure why it wouldn't be visible. Sorry I can't be more help.
Sent from my SGH-T769 using Tapatalk 2
In recovery they are visible, but when I go to flash one it says no files found..
I was also stuck in a boot loop after attempting to get my phone back to stock since I got a replacement phone. Followed all of the instructions, but realized although I did a factory reset, I forgot to wipe data. So I simply got CWM through Odin....got into recovery wiped data....rebooted and voila! I'm back to stock no root. It took all of 1 minute to do. Maybe that will work for you too
samsung s blaze stuck !!!!!!
please help,i need to get my Samsung s blaze to recovery mode, i already rooted and updated to Cm 10 11 19 nightly and i try to go back to stock rom from using the Odin but i backed up my cm rom,after flashing the stock ROM my phone try to reboot but got stuck at the Samsung logo after the android logo..i tried to get to recovery mode by pressing volume up +home button plus power at the same time but it wont,please your help will be much appreciated,
rashcapone said:
please help,i need to get my Samsung s blaze to recovery mode, i already rooted and updated to Cm 10 11 19 nightly and i try to go back to stock rom from using the Odin but i backed up my cm rom,after flashing the stock ROM my phone try to reboot but got stuck at the Samsung logo after the android logo..i tried to get to recovery mode by pressing volume up +home button plus power at the same time but it wont,please your help will be much appreciated,
Click to expand...
Click to collapse
You gotta search bro all you have to do is flash cwm then reboot to recovery and do a factory reset
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Thank you for your quick response.I am able to get to recovery mode.and wipe data and factory reset.I got cm10 1117 nightly on my SD card and I install that and my phone is back.then I install jelly bean Google app.I will never try to go back to stock ROM again. this ROM is cm10 1117 nightly is better than stable cm10 for me.I thank all the devs who worked together to bring this your effort is much appreciated.
This is how I get to recovery mode on my Samsung galaxy s blaze.
1.press the vol up + vol down + power button at the same time.
2.as soon as the Samsung logo light up I release power + vol down button but not releasing releasing vol up button but rather press it harder..and there it comes....may be someone might be having the difficulty I had before
Give it a try...
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

Bootloop. Please help! RemICS JB

Hi! Today i tried to update the i9003L of my brother's girlfriend. Ive gad RemICS 4.0.4, wiped data and then flashed RemICS JB. But when its mostly complete, the phone goes off and then automatically turned on. I get a bootloop at the animation. I cant even enter to recovery and flash gapps but still can i enter to the download mode. So i've downloaded a 2.3.6 gingerbread (i dont remember the buold but it starts with UB, from argentina my country) and flashed from odin, it says flash and the phone reboots, but i still have the bootloop problem in samsung logo animation. I dont think i ve messed the sd card because when i flashed the stock rom apears a yellow letters saying wiping data and wiping cache, and i didnt have any error (i guess). I cant enter stock recovery because when i press the vol up home and power button the screen fades to black and then reboots. Please help me, tomorrow i will flash cf root to see whats happening and if my sd card isnt f*cked up i will flash RemICS 4.0.4 again. Thats correct or i need to go back froyo? Please help! Sorry my bad english
You should have noticed that i9003L is not same as i9003, they didn't share same firmware if I'm not mistaken as I found different official firmware for both.
Hey? Sorry but its my first time hearing i9003L and googled it. I think its i9003 our phone. Hold volume first, then HOME button, then last the power. If it reboots to recovery, ur just fine.
Found some information about i9003L in Chile Samsung website.
Based on the site, it's called Samsung Galaxy S Latona
The specs are the same but I'm not sure you can directly flash i9003 rom without some modification.
You can try flashing with kpe+pit first if you can enter download mode.
Beware that in our rom, the build prop stated i9003, I'm not sure whether it will cause trouble in your phone.
alex88510 said:
Found some information about i9003L in Chile Samsung website.
Based on the site, it's called Samsung Galaxy S Latona
Click to expand...
Click to collapse
I9003 use latona. Also googled it, its the same as our device.
Okay, about the fade to black when opening stock recovery,
After holding the power+home+vol up, when the phone boots, you have to release the power button but don't release the two buttons yet until the recovery is opened.
Sent by my Galaxy $
---------- Post added at 07:19 AM ---------- Previous post was at 07:06 AM ----------
Open the recovery using steps I said just now, wipe data/cache.
Download firmware XXKPE.
Use Odin v1.8x (not odin 4.x), place latona.pit as pit file, tick the check box repartition. place phone in download mode and plug it in. Start the flash.
After it says pass, unplug and remove battery and place the battery back.
Plug it back in download mode,
Put other files of KPE (Phone, Pda, Boot) and flash. The phone reboots itself.
Also using Odin,
place the Gingerbread firmware on PDA, put the phone in download mode, connect to pc and press start. After a while the yellow/green(whatever color it is) square in odin will show "PASS" and the phone reboots itself. You can unplug the phone.
Poof! The phone is now functional.
Sent by my Galaxy $
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Brociu12 said:
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Click to expand...
Click to collapse
what an coincidence me too have an same problem... i had an feeling like going 2 be dead...
Thank you! I had the same problem yesterday and your tips make my phone working
Wysłano z Galaxy S I9003
Click to expand...
Click to collapse
Good to hear that.
Sent by my Galaxy $
Hi! Thanks! i fixed the phone (uff...), first i tried to go to stock GB, flashed ok and ODIN sayed "PASS", but i have a bootloop again, so flashed CF-Root and i have the screen fading to black again, but, thanks for the advice, ive pressed Power, Home and volume up, and then stop pressing Power, and then the recovery appears!! Wiped everything and i've flashed the RemICS 4.0.4, rebooted and works! i cant belive the phone is working again!. Thanks for the support.
And yes, the i9003L and i9003 are the same phone, the "L" means it has a diferent modem, but the specs are the same and their roms are also the same. Also The L or Latona is for "Latin America"/Latinoamérica. So thanks again and sorry for my bad english!
Re: [Q] Reflashing I9003
Sent from my GT-I9003 using xda app-developers app.
Sent from my GT-I9003 using xda app-developers app

[Q] Brick forever or possibility to restore?

Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.
I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
how did you try to enter the recovery mode? what key combination that you press...
Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.
jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.
Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..
Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!
1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....
Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:

[Q] please help with bootloop galaxy note 10.1 !!

Hi everybody,
I have installed TWRP on my SM-P601 galaxy note 10.1 using odin on this link teamw.in/project/twrp2/206. It's succesfully installed but i couldn't get into recovery mod, i've tried all the button combinaisons but couldnt!
But i tried to get in using this app's com.koushikdutta.rommanager by clockworldmod, with the option (Reboot into Recovery) and now i'm stuck in a kind of bootloop when i turn it on, there is just the logo "samsung galaxy note 10.1 2014 edition".
Without the charger it stays on this until the battery runs out! and when i put the charger it runs and get stuck in the bootloop again. is there away to fix this wit
having to take off the battery? i can get in download mode !
Thank you a lot for your help
zakaria1193 said:
Hi everybody,
I have installed TWRP on my SM-P601 galaxy note 10.1 using odin on this link teamw.in/project/twrp2/206. It's succesfully installed but i couldn't get into recovery mod, i've tried all the button combinaisons but couldnt!
But i tried to get in using this app's com.koushikdutta.rommanager by clockworldmod, with the option (Reboot into Recovery) and now i'm stuck in a kind of bootloop when i turn it on, there is just the logo "samsung galaxy note 10.1 2014 edition".
Without the charger it stays on this until the battery runs out! and when i put the charger it runs and get stuck in the bootloop again. is there away to fix this wit
having to take off the battery? i can get in download mode !
Thank you a lot for your help
Click to expand...
Click to collapse
I have exactly the same problem now. I tried to update a kernel via TWRP and now boot loop. I can't even get into download mode, let alone recovery mode, just reboots automatically when hold the power button down.
mattdb said:
I have exactly the same problem now. I tried to update a kernel via TWRP and now boot loop. I can't even get into download mode, let alone recovery mode, just reboots automatically when hold the power button down.
Click to expand...
Click to collapse
I don't get into download mode at the first try i keep trying many times, maybe it's the same thing for you too. apparently i need to flash stock rom with odin on download mode, that's what you should do too if you get to download mode.
I have same problem...
Sent from my C6833 using Tapatalk
mattdb said:
I have exactly the same problem now. I tried to update a kernel via TWRP and now boot loop. I can't even get into download mode, let alone recovery mode, just reboots automatically when hold the power button down.
Click to expand...
Click to collapse
Noobie here, and not sure if I know enough to make much sense.
I had a similar situation occur today.
New to me but a 2nd hand p600 which rooted today and then I used Odin 3.10.6 to flash TWRP and found myself in a boot loop similar to the description.
I panicked bigtime and feverishly googled my way to to this message thread and my hopes were raised when I read the OPs message and then got dashed to find no solution posted .
After perhaps 20 attempts of getting combined button pushes and releases correct. (it never happened ) I was desperately trying almost anythiing and then got to TWRP File manager, then Reboot, then System, then Normal Reboot and finally Success! I got the regular reboot. Phew!
Hope it helps
Well, I let it sit over the weekend and the battery complete depleted. I was then able to get into TWRP and Download mode when I applied power, I have since flashed a new rom and whewwww, up and running again. Before the battery went dead, it wouldn't do anything but reboot.....

Categories

Resources