Database Info

How to go back to MIUI from a custom ROM?

Hello,
Right now I am on havoc OS on my tulip. I want to clean flash miui 10 . How can I do that safely using miflash tool? I had heard somewhere that I can only flash back to that exact version from where I flashed custom ROM?
Please help me as I am new to arb and it really confuses me

Download the latest stable build.
http://bigota.d.miui.com/V10.2.2.0....roGlobal_V10.2.2.0.OEKMIXM_5af4a46864_8.1.zip
Then just flash it with TWRP (Pitchblack is recommended) like you would any ROM.

Joomsy said:
Download the latest stable build.
http://bigota.d.miui.com/V10.2.2.0....roGlobal_V10.2.2.0.OEKMIXM_5af4a46864_8.1.zip
Then just flash it with TWRP (Pitchblack is recommended) like you would any ROM.
Click to expand...
Click to collapse
Do i need to re-flash "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers " again when flashing an MIUI ROM with TWRP?

CUstom ROM installation problem, please help

Hi to everyone. I have a european version of the op7 pro. The device produces an issue when using android auto, which I use daily (the bottom bar is rarely responsive to my touches whereas the rest of android auto works fine). So I wanted to try a custom ROM and see if the problem persists.
I tried multiple roms like havoc, aosip and lineage following the respective guides of installation, but regardless of the ROM, I always get stuck at the startup animation when I first try to reboot to system after installing twrp, magisk, gapps etc.
The only rom that seems to work is any version of OOS.
Any help would be greatly appreciated!

Exact what steps you do when installing a custom ROM?

U need to explain how you flash those OS; from my experience on OP6 -> flashing a third party rom need to update it' firmware to match the rom u try to flash, or else it cannot go into system definitely!

Steps :
Unlock bootloader
Boot twrp
Flash twrp
Flash rom
Flash twrp
Reboot to recovery
Once again flash rom
Once again flash twrp
Flash magisk
Flash gapps

Use international version instead of European. This mostly solves the issue.
Also steps should be.
Flash oos
Flash twrp
Reboot recovery
Flash oos
Flash twrp
Reboot recovery
Format data
Flash rom
Flash twrp
Flash gapps (if required)
Flash magisk(if needed)
Flash dm verity (if needed)
Reboot system

pranacrockz said:
Use international version instead of European. This mostly solves the issue.
Also steps should be.
Flash oos
Flash twrp
Reboot recovery
Flash oos
Flash twrp
Reboot recovery
Format data
Flash rom
Flash twrp
Flash gapps (if required)
Flash magisk(if needed)
Flash dm verity (if needed)
Reboot system
Click to expand...
Click to collapse
What oos do I flash? Would you mind linking me to it?:good:

Kama45 said:
What oos do I flash? Would you mind linking me to it?:good:
Click to expand...
Click to collapse
Latest android 10 stable rom available for your phone.

pranacrockz said:
Use international version instead of European. This mostly solves the issue.
Also steps should be.
Flash oos
Flash twrp
Reboot recovery
Flash oos
Flash twrp
Reboot recovery
Format data
Flash rom
Flash twrp
Flash gapps (if required)
Flash magisk(if needed)
Flash dm verity (if needed)
Reboot system
Click to expand...
Click to collapse
I think this post is useful. But what is dm verity, where to find?
I flash the roms and manage to open them but sensors not working on any custom rom. I create a topic to help but nobody cared.

c3drik 67 said:
Latest android 10 stable rom available for your phone.
Click to expand...
Click to collapse
Is that the same as going back to stock with the MSM tool?
Like this one: https://androidfilehost.com/?fid=4349826312261732239

poulidis said:
Steps :
Unlock bootloader
Boot twrp
Flash twrp
Flash rom
Flash twrp
Reboot to recovery
Once again flash rom
Once again flash twrp
Flash magisk
Flash gapps
Click to expand...
Click to collapse
You must Format internal storage before booting into Custom ROM.
Also, when you flash a Custom Rom, when it's done flashing, reboot once more to recovery and then flash the rest like Gapps, Magisk, etc... (Keep in mind that some custom ROMs require once time boot before flashing Magisk).

Kama45 said:
What oos do I flash? Would you mind linking me to it?:good:
Click to expand...
Click to collapse
https://otafsg1.h2os.com/patch/amaz...P.26_OTA_026_all_2003222032_6893aca031668.zip
---------- Post added at 09:09 AM ---------- Previous post was at 09:08 AM ----------
GöğüstekiDövme said:
I think this post is useful. But what is dm verity, where to find?
I flash the roms and manage to open them but sensors not working on any custom rom. I create a topic to help but nobody cared.
Click to expand...
Click to collapse
Dm Verity is to keep the phone unencrypted. I don't use dm Verity but I never faced such problems.
Which rom u using?

pranacrockz said:
https://otafsg1.h2os.com/patch/amaz...P.26_OTA_026_all_2003222032_6893aca031668.zip
---------- Post added at 09:09 AM ---------- Previous post was at 09:08 AM ----------
Dm Verity is to keep the phone unencrypted. I don't use dm Verity but I never faced such problems.
Which rom u using?
Click to expand...
Click to collapse
Oos O2 Beta 11 now. Back when I try, it was oos beta 10. None of custom roms sensors were not working. Like Pixel exp, havoc, lineage
Sent from my OnePlus7Pro using XDA Labs

Never use beta. Always use stable

pranacrockz said:
Never use beta. Always use stable
Click to expand...
Click to collapse
I'll try one more time later. Thanks.

Bootloop Problem?

I have an interesting problem. I was using a11 stable beta official. I wanted to go back to aosp rom. I know it's impossible. But before, I was installing the official A10 rom global then install a11 aosp rom. It was working. But now, When I try to install Official rom by fastboot or recovery or mi flash tool, it stucks on boot. But interesting, I can install Abhix Rog edition rom and A11 official stable beta rom. I can't figure out this problem. I'm using orange fox recovery, also tried with TWRP. Whatever I tried that didn't work. Is there any advice for solution? Thanks in advance.
NOTE : Before, in recovery there are two folders sdcard and scard1.But now even I do format data, I only see only sdcard folder, there's no sdcard1 folder.

I solved the problem. I re-partition sdcard then format data. Then install 12.0.8.0 fw. Install havoc os 4.3 then flash dm-verity disabled then flash permissiver_v5...Boom works

hucar13 said:
I solved the problem. I re-partition sdcard then format data. Then install 12.0.8.0 fw. Install havoc os 4.3 then flash dm-verity disabled then flash permissiver_v5...Boom works
Click to expand...
Click to collapse
Hello! i am having the same problem. can you please help me with the repartitioning?

First Download the below files
1. TWRP
2. MIUI Firmware( Region wise)
3. Download Recovery Rom.
3. Download Fastboot Rom.
4. Download Mi Global Flash Tool.
5. Boot into Fastboot.
6. Flash TWRP. Install MIUI Firmware( would be around 80MB -100 MB Only) zip file.
7. install the Recovery Rom zip file. Format Data.
8. Reboot in to Bootloader.
9. Now open the Mi global flash tool and select the extracted Fastboot rom and click flash..
Hope this will solve the Problem

Guys how can i go back to the official MIUI that was in my phone before i installed a custom ROM?

I installed Arrow OS after unlocking bootloader and flashing a recovery so i want to sell the phone and is there anyway i can lock the bootloader and instal the official MIUI?
I already have the official ROM and fastboot can be used on it but i want help to minimize the chances of bricking my phone

pistone45 said:
I installed Arrow OS after unlocking bootloader and flashing a recovery so i want to sell the phone and is there anyway i can lock the bootloader and instal the official MIUI?
I already have the official ROM and fastboot can be used on it but i want help to minimize the chances of bricking my phone
Click to expand...
Click to collapse
Yes, flash MIUI fastboot ROM with MI flash tool.

Noter2017 said:
Yes, flash MIUI fastboot ROM with MI flash tool.
Click to expand...
Click to collapse
Will it work if I flash it directly on TWRP?
-Save MIUI 12 to internal storage
-Boot to recovery
-Flash MIUI
-Format Data
-Reboot

Sketzu said:
Will it work if I flash it directly on TWRP?
-Save MIUI 12 to internal storage
-Boot to recovery
-Flash MIUI
-Format Data
-Reboot
Click to expand...
Click to collapse
If you do not want any problems , you will use fastboot version of MIUI and flash it in mi flash tool.

Can the MIUI EU 12.0.8 be flashed via twrp or does it have to go through mi flash?

Can the MIUI EU 12.0.8 be flashed via twrp or does it have to go through mi flash?

tumacuong said:
Can the MIUI EU 12.0.8 be flashed via twrp or does it have to go through mi flash?
Click to expand...
Click to collapse
Can you post the rom link.,
It's simple, if you have a ZIP file=TWRP.
if it is a TGZ file=Miflash.

Flash error 1

tumacuong said:
Flash error 1
Click to expand...
Click to collapse
With what rom etc ...?

eu 12.0.8 >>>> evolution 5.9

tumacuong said:
eu 12.0.8 >>>> evolution 5.9
Click to expand...
Click to collapse
Use this TWRP https://androidfilehost.com/?fid=17248734326145679747
Twrp->wipe->format data(write yes)****
reboot twrp
flash FW MIUI China Stable V12.0.8.0.ZIP https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.0.8.0.QJKCNXM/
reboot twrp
Twrp->wipe->format data(write yes)****
reboot twrp
flash rom
rebot system
....If error(red lines reboot twrp and format again)