Related
Can miui official roms be flashed with twrp? Or do they only flash on MI stock recovery?
If you have it as a zip for recovery than you can also flash it with twrp
rob rich said:
If you have it as a zip for recovery than you can also flash it with twrp
Click to expand...
Click to collapse
Are you sure? Because I saw that someone said they are supposed to be used with MI stock recovery on miui forum. But it was just one guy...and I never saw anywhere that those roms provided by miui website could be flashed with twrp, that's why I asked. Have you tried that?
Yes, sure. I switch between miui 6 stable rom, miui 7 global beta rom and euphoria or cm roms almost every day
rob rich said:
Yes, sure. I switch between miui 6 stable rom, miui 7 global beta rom and euphoria or cm roms almost every day
Click to expand...
Click to collapse
@rob rich : can you upload for me recovery image (mi recovery) from miui 7 v5.8.22 first version of global beta rom??. just recovery image. thanks before
because when i restore stock stable recovery image from miui 6, i got bootloop & not reboot to recovery.
EDIT >> i use mi toolkit too, but same bahavior. no reboot to recovery.
hello everyone,
how can I go back to MIUI ROM ? I want one message which I took backup using MIUI PC Suite. I was on CM12.1, copied 6.6.6.0 & 6.7.2.0 in my phone (for safety). I did clean for system, cache, dalvik-cache, data. Now when I'm trying to install 6.6.6 or 6.7.2 it's giving me error.
mount: failed to mount /dev/block/bootdevice/by-name/userdata at /data: Device or resource busy
mount: failed to mount /dev/block/bootdevice/by-name/system at /system: Device or resource busy
E: Error executing updater binary in zip '/sdcard/Mi 4i ROMs/ Mi4i_Global_V6.6.6.0.LXIMICF.zip'
how can I achieve this ? am I doing something wrong ???
Please help me.
First wipe cache,data,dalvik,system and then reboot to recovery again then flash the miui rom wait for 10 min.
Need help with custom rom installation
rob rich said:
Yes, sure. I switch between miui 6 stable rom, miui 7 global beta rom and euphoria or cm roms almost every day
Click to expand...
Click to collapse
Hi Bro, When i tried to install custom rom (InfinitiveOS-v1.2-ferrari-5.1.1--20150905-OFFICIAL) Im always getting error. Im using latest version of MIUI 7 beta. Steps i followed are: 1. download rom n gapps 2. Rooted and installed cutom recovery(TWRP) 3. wiped cache and reset everything. 4. i tried to install custom rom and im getting error saying something about MD5 and partition. Help me please
Yeah
migueldbr said:
Can miui official roms be flashed with twrp? Or do they only flash on MI stock recovery?
Click to expand...
Click to collapse
Yes , its possible
Use firmware-lp-6.6.10.0 patch
Hasain said:
Hi Bro, When i tried to install custom rom (InfinitiveOS-v1.2-ferrari-5.1.1--20150905-OFFICIAL) Im always getting error. Im using latest version of MIUI 7 beta. Steps i followed are: 1. download rom n gapps 2. Rooted and installed cutom recovery(TWRP) 3. wiped cache and reset everything. 4. i tried to install custom rom and im getting error saying something about MD5 and partition. me please
Click to expand...
Click to collapse
Whenever u switch from miui to any new custom rom , flash a patch 6.6.10.0 file .. u can avoid this error .. And then follow the usual process after flashing that patch file....
"https://basketbuild.com/uploads/devs/thewisenerd/ferrari/firmware-lp-6.6.10.0.zip"
I m running RR 5.8.5 and twrp recovery.
How can I go back to stock miui rom?
Tried flashing stock ROM from twrp recovery, but failed. Can someone guide me for the same?
Thanks.
yes. flash use lazyflasher on twrp
Hi there, can someone enlighten me how yo flash custom roms?my device already unlocked bootloader and i know how to flash cuz i play with xiaomi mi5, sams galaxy3 , sony x8.
For now i dont have a twrp. Im going twrp by fastboot before this.
Im really sure that i already go through all of the post. But seems from OB10 is really complicated.
1.ready fastboot twrp, bluspark twrp,roms, gapps and magisk( if necessary) and custom kernel
2.fastboot twrp by cmd or else
3.wipe what here? Or just factory reset and leave internal storage?
*Here i confused, do i need to wipe for both slot. Im still new to a/b partition. And do i need to do that for both slot to flash as steps 4-10 as below?
4.flash roms then bluspark twrp
5.reboot to recovery
6.flash gapps,magisk? Then twrp back?
7.reboot to twrp
8.flash custom kernel then twrp again?
9.reboot system
10. End right?
Please help me here. I cant find the real and proper steps. The only way i found is from OB7 to custom roms as they share same security patch.
Thanks for any help.
1. Flash any strock rom.zip partition A.
2. After that recovery.zip
3. Reboot back to recovery
4. Confirm you are in another slot B
5. Flash stock rom.zip. Which slot first is not important.
6. After that flash recovery.zip and then reboot.
After that you can install whatever you want.
That what I do if im switching roms and trying new stuff.
Working everytime.
Until OB7 and stable 9.0.2 I used fasboot roms, flashed via AIO tool, but new fastboot roms working different and I got laggy video and audio.
Okeh thats clear for both slot. But for OB10 to any customs rom is it needed to flash OB7?
What do you mean by stock rom?bete rom or stable rom?
slayerliar said:
Okeh thats clear for both slot. But for OB10 to any customs rom is it needed to flash OB7?
What do you mean by stock rom?bete rom or stable rom?
Click to expand...
Click to collapse
Stock any offical rom for OP6
9.0.2 or 9.0.3 or any OB3,4,5,6,7,8,9,10
If you want custom rom, look instructions, there is mentioned what is base rom. That you need flash.
If there is custom rom based OB7 then you need flash OB7(probably working lower builds also)
Thank brotha. I think they need to state which firmware do we need to start from. Otherwise it will be like me that confusing as they will patch up more and more security.
slayerliar said:
Thank brotha. I think they need to state which firmware do we need to start from. Otherwise it will be like me that confusing as they will patch up more and more security.
Click to expand...
Click to collapse
Pie ROM, pie firmware. (Except pre release betas)
Oreo ROM, Oreo firmware.
ROM - always flash latest firmware of the OS you want pie or Oreo (I always go for latest and don't have any issues . Tho I'm back to oos ,debloated now.)
Twrp - Always after ROMs, before roboot.
Gapps - after twrp and reboot, to make sure it installs to the right slot, that's why you install twrp and then reboot.. this will change your slot from A to B or from B to A. Manual switch is never necessary
Flashing gapps flashes to the slot you are in right now, so flashing before the first reboot (after twrp flash) Will get it to the wrong slot.
Magisk - if you want root. After all.
After all this you can, if you want, flash decrypt ..if you don't need your device to be encrypted,this Will give you more to think of tho.. let's just not go into this now.
i understand the process, but get confused at which file to specifically flash twice when they say
"latest firmware of the OS". So lets say the custom ROM i want to flash needs a PIE firmware 9.0.2 or higher,
what file am i supposed to flash?
9.0.2-PIE-OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9-FASTBOOT.zip
or
OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9.zip
Hello I want to install a Android 10 ROM but I just can't do it. I've followed instructions and tried to install crdroid, Paranoid and Pixel Experience. Everything result as a never ending boot animation or "no command" screen.
The logcat spam me with
Code:
[email protected]::IVendorF ingerprintExtensions/default
ServiceManagement: getService: Trying again for [email protected]::IVendorF ingerprintExtensions/default...
I've followed those instructions
From last OOS, reboot to fastboot, boot TWRP, flash last OOS and TWRP, reboot, do the same, reboot, format Data, reboot, flash the ROM and TWRP, reboot.
I've may added some extra reboot to be sure but it should work fine.
What did I do wrong, is this because I come from a BA version and not AA ? or 10.0.4 instead of 10.0.3 ?
I need ppl to tell me if they were able to flash a ROM coming from 10.0.4 BA please.
Thx for your support
Please someone, don't tell me I'm the only one having a European firmware...
I can confirm this too when i use EU vendor (GM1913).
I just use MSM to convert the device to International (after backing up EVERYTHING).
Using MSM->Unlocking bootloader again->Installing AOSP
Svid said:
I can confirm this too when i use EU vendor (GM1913).
I just use MSM to convert the device to International (after backing up EVERYTHING).
Using MSM->Unlocking bootloader again->Installing AOSP
Click to expand...
Click to collapse
Thx it worked
I put the link for MSM tool here to complete your answer
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Why did you not just falsh the international version in twrp instead of the eu version and then flash a custom rom of your choice. No need for the msm tool.
hallo dare said:
Why did you not just falsh the international version in twrp instead of the eu version and then flash a custom rom of your choice. No need for the msm tool.
Click to expand...
Click to collapse
because you can't flash GM21AA stable on a GM21BA based rom (error 7)
Svid said:
because you can't flash GM21AA stable on a GM21BA based rom (error 7)
Click to expand...
Click to collapse
I did previously. No issues. Not sure if it's possible on latest version, but it did work
Hi to everyone. I have a european version of the op7 pro. The device produces an issue when using android auto, which I use daily (the bottom bar is rarely responsive to my touches whereas the rest of android auto works fine). So I wanted to try a custom ROM and see if the problem persists.
I tried multiple roms like havoc, aosip and lineage following the respective guides of installation, but regardless of the ROM, I always get stuck at the startup animation when I first try to reboot to system after installing twrp, magisk, gapps etc.
The only rom that seems to work is any version of OOS.
Any help would be greatly appreciated!
Exact what steps you do when installing a custom ROM?
U need to explain how you flash those OS; from my experience on OP6 -> flashing a third party rom need to update it' firmware to match the rom u try to flash, or else it cannot go into system definitely!
Steps :
Unlock bootloader
Boot twrp
Flash twrp
Flash rom
Flash twrp
Reboot to recovery
Once again flash rom
Once again flash twrp
Flash magisk
Flash gapps
Use international version instead of European. This mostly solves the issue.
Also steps should be.
Flash oos
Flash twrp
Reboot recovery
Flash oos
Flash twrp
Reboot recovery
Format data
Flash rom
Flash twrp
Flash gapps (if required)
Flash magisk(if needed)
Flash dm verity (if needed)
Reboot system
pranacrockz said:
Use international version instead of European. This mostly solves the issue.
Also steps should be.
Flash oos
Flash twrp
Reboot recovery
Flash oos
Flash twrp
Reboot recovery
Format data
Flash rom
Flash twrp
Flash gapps (if required)
Flash magisk(if needed)
Flash dm verity (if needed)
Reboot system
Click to expand...
Click to collapse
What oos do I flash? Would you mind linking me to it?:good:
Kama45 said:
What oos do I flash? Would you mind linking me to it?:good:
Click to expand...
Click to collapse
Latest android 10 stable rom available for your phone.
pranacrockz said:
Use international version instead of European. This mostly solves the issue.
Also steps should be.
Flash oos
Flash twrp
Reboot recovery
Flash oos
Flash twrp
Reboot recovery
Format data
Flash rom
Flash twrp
Flash gapps (if required)
Flash magisk(if needed)
Flash dm verity (if needed)
Reboot system
Click to expand...
Click to collapse
I think this post is useful. But what is dm verity, where to find?
I flash the roms and manage to open them but sensors not working on any custom rom. I create a topic to help but nobody cared.
c3drik 67 said:
Latest android 10 stable rom available for your phone.
Click to expand...
Click to collapse
Is that the same as going back to stock with the MSM tool?
Like this one: https://androidfilehost.com/?fid=4349826312261732239
poulidis said:
Steps :
Unlock bootloader
Boot twrp
Flash twrp
Flash rom
Flash twrp
Reboot to recovery
Once again flash rom
Once again flash twrp
Flash magisk
Flash gapps
Click to expand...
Click to collapse
You must Format internal storage before booting into Custom ROM.
Also, when you flash a Custom Rom, when it's done flashing, reboot once more to recovery and then flash the rest like Gapps, Magisk, etc... (Keep in mind that some custom ROMs require once time boot before flashing Magisk).
Kama45 said:
What oos do I flash? Would you mind linking me to it?:good:
Click to expand...
Click to collapse
https://otafsg1.h2os.com/patch/amaz...P.26_OTA_026_all_2003222032_6893aca031668.zip
---------- Post added at 09:09 AM ---------- Previous post was at 09:08 AM ----------
GöğüstekiDövme said:
I think this post is useful. But what is dm verity, where to find?
I flash the roms and manage to open them but sensors not working on any custom rom. I create a topic to help but nobody cared.
Click to expand...
Click to collapse
Dm Verity is to keep the phone unencrypted. I don't use dm Verity but I never faced such problems.
Which rom u using?
pranacrockz said:
https://otafsg1.h2os.com/patch/amaz...P.26_OTA_026_all_2003222032_6893aca031668.zip
---------- Post added at 09:09 AM ---------- Previous post was at 09:08 AM ----------
Dm Verity is to keep the phone unencrypted. I don't use dm Verity but I never faced such problems.
Which rom u using?
Click to expand...
Click to collapse
Oos O2 Beta 11 now. Back when I try, it was oos beta 10. None of custom roms sensors were not working. Like Pixel exp, havoc, lineage
Sent from my OnePlus7Pro using XDA Labs
Never use beta. Always use stable
pranacrockz said:
Never use beta. Always use stable
Click to expand...
Click to collapse
I'll try one more time later. Thanks.
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
I think your device is triggered with anti-rollback. So you cannot install any rom with build less than 11.0.15.0 that is poco x2 11.0.7.0 cant be flashed. So, you have to wait until new poco build greater than 11.0.15.0 and then flash it. Until then, flash your existing rom or some custom rom. Do it carefully and dont ever flash older roms from now, if something goes wrong, your device will hardbrick and you will have to go to service center where they have authorized EDL access to your device to flash things. Best of Luck.
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
vivek12341 said:
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
Click to expand...
Click to collapse
@eagle06 am worried about 11.0.15.0 > 11.0.7.0 which will trigger ARB as @vivek12341 has pointed out and it will hard brick the device, from what I have read around, hence this post if anybody knows a way out. There seemed to be workarounds initially when Xiaomi introduced ARB, I have not seen anybody mentioning such things in recent times especially for MiUI 11.
The reason why I moved to 11.0.15.0 is was, as it has no bloatware etc, and I did NOT know about ARB, now that I have 11.0.15.0 most of the custom ROMs are based on Poco X2 11.0.7.0 and I am facing issues flashing ROMs based on 11.0.7.0, as the format data from TWRP does not wipe properly + I see 98% of the time device goes to fastboot mode even if I flash Poco stock recovery and clear the data, seems like 11.0.15.0 is also an issue
May be I will have to wait till Poco releases updates > 11.0.15.0 or for MiUI 12. Actually I still dont know, not many know much on this subject.
crDroid works without any issues (which is what my current daily driver, its a very stable ROM), flashing on 11.0.15.0 after clearing data, also any ROM whose dev releases fastboot ROM's those also I can flash and boot without issues, rest all ROM's dont and end up back in fastboot mode
coolcorner said:
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
Click to expand...
Click to collapse
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phoenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one.
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
eagle06 said:
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phonenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one. e
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
Click to expand...
Click to collapse
1. Which script are you talking about? I could not find any script. check attached snapshot.
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too?
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow!
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
jngiag said:
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Click to expand...
Click to collapse
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
coolcorner said:
1. Which script are you talking about? I could not find any script. check attached snapshot.
Its in META-INF/com/google/android/ file name updater-script. Change getprop("ro.product.device") == "phoenixin" || this to getprop("ro.product.device") == "phoenix" || . Why we are doing this? because we are using k30 twrp.. there is no special twrp for poco x2. phoenix = k30, phoenixin=poco x2
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too? Any rom
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow! Yes with twrp. When you flashed twrp recovery , your device is now treated as K30 in twrp space
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?check Pm , cant post telegram links here
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?Theres no K30 global.., poco x2 rom is global, k30 roms is china and there is eu custom rom based on chinese roms
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
Whenever you want to use custom rom without vendor , you need to flash either 11.0.0.7 zip or 11.0.0.7 vendor zip before flashing that custom rom
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
Check my replies in blue
coolcorner said:
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
It is a chinese rom. You can select english as your default language. It really doesn't matter as you are going to wipe it anyway if your purpose is to use it for flashing custom roms.
[Deleted]
coolcorner said:
Just now I tried flashing V11.0.15.0.QGHCNXM using Mi Flash tool, and I hit Anti Roll back error again. Not sure what I am missing here I am on same version 11.0.15.0 EU ROM which has same Anti 2, not sure why the error this time?
Click to expand...
Click to collapse
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
Click to expand...
Click to collapse
Thanks, really appreciate your quick revert. I am trying out with xiaomitool now. I know TWRP method is simple, just edit/change the devicename. But, I am **** scared after seeing ARB error so many times. So using xiaomitool as you mentioned use it to overcome ARB error. I will update how it goes.
I thought Xiaomi is dev/custom dev friendly, seeing all these errors, no wonder why people resent MiUI so much, of course the hardware + price is good. From my search even Google on their devices is not this harsh about ARB blocking after unlocking bootloader.
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
Click to expand...
Click to collapse
Thanks for the vendor image link.
Oh! yeah I am back in Poco 11.0.7.0 image, xiaomitool worked without issues. Thanks to you!!
@eagle06 do you know in this entire image (attached file) list (from tgz file) which is fastboot file? The reason I ask is, in Poco X2 in fastboot mode I see a single deadpixel, whereas when I was in EU MIUI I never saw that dead pixel. I plan to replace that file with EU MIUI fastboot image file, so when am in fastboot, it is clean without any dead pixels.
That small white pixel in fastboot is normal. All users have it including me.
Pic
eagle06 said:
Pic
Click to expand...
Click to collapse
Yep right that is the one. When I was on EU Miui, that one did not have, hence asked which is the image file for fastboot, thought I would flash that or replace next time I flash Poco stock when I am installing new custom ROM.
Yes, its a trivial thing can be ignored, does not really bother or harm.
BTW, so now that I am back in Poco X2 stock (On top of that I have installed BlissROM), next time I have to flash I can use either TWRP or Xiaomitool/V2.
1. For TWRP, I need to rename devicename to phoenix from phoenixin in updater-script and flash it using TWRP after clearing data
OR
2. I can use Xiaomitool/V2 with ADB debugging on (same step as last time)
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
jngiag said:
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
Click to expand...
Click to collapse
Woah! Miflash tool kept throwing errors at me and you are saying it worked for you? Phew!!
If I had flashed using TWRP, I might have been holding a 200gm brick in my hands LOL. Got lucky by using Xiaomitool/v2 then Thanks to you. I will stick to Xiaomitool for flashing stock ROMs hence forth.