Related
You need to be in stock emui 8 with unlocked bootloader.
If you are in elemental rom come back to stock emui 8 then flash this rom.
If you are in another gsi you can proceed directly (flash below recovery then do factory reset then flash gsi los rom via fastboot then again reboot to stock recovery do factory reset)
If you are in stock emui 8 do not wipe anything just flash it via fastboot and do factory reset.
first flash this recovery
https://mega.nz/#!cbJFAIQD!qvp1KnZ0qxlg6nHDFmpM5qyZ9QUVIDe5PoZE0BQf8fs
Fastboot command: fastboot flash recovery_ramdisk name of recovery.img
Then download
https://openkirin.net/download/
Fastboot command: fastboot flash system name of image.img
Los or RR rom and flash via fastboot (no need to wipe anything) then reboot to recovery do factory reset. You will have oreo 8.1 with gapps ,full signal bars,face unlock and stock camera.
If you are experiencing no sound its not gsi problem you didn't flashed stock completely so first flash this twrp recovery (only if you are in oreo not for emui5)
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Then flash stock emui 8 via huru
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
If huru only flased update.zip and gave you error no update_full_hw.zip and no update_data_full_public.zip not found in sd card then you need to rename them and flash again without wiping anything.
If stock emui 8 taking more than 5 minutes to boot then flash stock recovery mentioned above and do factory reset then it will boot with in 5 minutes.
If you don't have network or imei then you need to root. Then use any root explorer then go to cust/cn/all/localprop and change the line ro_config full network support=ture to false then reboot your network and imei will come back. You can do this in stock or in gsi.
RR ROM has great battery life with tons of customizations.
For emui8 flashing instructions,root and sound mod follow these instructions
https://forum.xda-developers.com/ho...si-honor-6x-8-1-0-t3809004/page5#post76981105
For telegram support of openkirin join this group
https://t.me/joinchat/HUf8EBJUJZQD281E59MdDw
Hell yess, thanks to open kirin team and you for mentioning it, the rom is excellent in use all bugs (the ones i faced in other gsi) fixed in this one and the availability of stock camera is just a cherry on top ?
Im newbie not familiar with this term
what is "gsi"?
need help
How to install emui 8 on bln-l21c432
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Generic system image. Read about project treble.
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Gsi means generic system image. In oreo custom roms will be available in system image formate we don't need twrp to flash custom roms just flash it via fastboot and factory reset.
Gsi roms will give you latest android os updates same as pixel devices getting so we don't need to wait for hauwei to release updates. If android p releases these gsi roms will give u update same as google devices getting. Oreo is game changer for every device.
If u want to flash gsi rom follow the emui8 upgrade method
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Then follow instructions on openkirin support section.
--ahmed said:
How to install emui 8 on bln-l21c432
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Follow that guide you will be on oreo in 10mins or less
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Which gsi redirection rom , carbon rom or los 15 ???
johnscrub said:
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Click to expand...
Click to collapse
Yes we can rebrand to original variant using hwota8
Khan ubaid said:
Which gsi redirection rom , carbon rom or los 15 ???
Click to expand...
Click to collapse
Go for Los 15 which is more stable and updated one.
Resurrection remix has huawei stock camera inbuilt....
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Khan ubaid said:
Resurrection remix has huawei stock camera inbuilt....
Click to expand...
Click to collapse
Los is also had hauwei stock camera but rr in initial buid and los got 4 updates.
Nollie8969 said:
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Click to expand...
Click to collapse
Because you can't perform factory reset from twrp it can't do it correctly finally you will ended up in bootloop. You can flashctwrp right after doing factory reset but openkirin doesn't support twrp.
whateven12 said:
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Click to expand...
Click to collapse
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Ramesh006 said:
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Click to expand...
Click to collapse
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
No solution, but in the meantime you can use Aptoide as store: http://en.aptoide.com
whateven12 said:
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
Click to expand...
Click to collapse
Did you flashed los or rr? Try reflash.
Hey guys. Iam trying 1 week to get Havoc Oreo.
I used this https://forums.oneplus.com/threads/oxygenos-9-0-ota-for-the-oneplus-6.909533/ to get base Oreo Rom on my OP6. This works.
But when i want to flash Havoc Oreo (Havoc-OS-20180904-enchilada-Official.zip) via TWRP (twrp-installer-enchilada-3.2.2-0.zip only this Version works for me) i get a loop in fastboot.
Can someone help me pls?
My instruction:
1. Flash downgrade
2. Go fastboot, boot TWRP
3. Flash TWRP via ADB SIDELOAD
4. Restart to recovery
5. Flash Havoc Oreo via ADB SIDELOAD
6. Restart
7. Bootloop Fastboot mode
thanks for any help.
RockstarLover said:
Hey guys. Iam trying 1 week to get Havoc Oreo.
I used this https://forums.oneplus.com/threads/oxygenos-9-0-ota-for-the-oneplus-6.909533/ to get base Oreo Rom on my OP6. This works.
But when i want to flash Havoc Oreo (Havoc-OS-20180904-enchilada-Official.zip) via TWRP (twrp-installer-enchilada-3.2.2-0.zip only this Version works for me) i get a loop in fastboot.
Can someone help me pls?
My instruction:
1. Flash downgrade
2. Go fastboot, boot TWRP
3. Flash TWRP via ADB SIDELOAD
4. Restart to recovery
5. Flash Havoc Oreo via ADB SIDELOAD
6. Restart
7. Bootloop Fastboot mode
thanks for any help.
Click to expand...
Click to collapse
OK, so I am not sure what exists in the OnePlus forums but lets start with:
1. You are aware there are two sets of partitions on this device correct? If not, please read here: https://forum.xda-developers.com/oneplus-6/how-to/guide-noobs-guide-to-b-partitions-op6-t3816123
2. What are you running now?
3. You need to update your TWRP to blu_spark but I am not sure if the latest (v9.91) works with Oreo... I know that v9.86 works with Oreo for sure. Read and download from here: https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965
4. Get the appropriate OOS zip file from this thread: https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Specifically OOS 5.1.11: https://www.androidfilehost.com/?fid=1322778262903980680
The basic steps should be like this (all assumes you have and unlocked bootloader):
1. If you are running OOS 5.1.11, reboot to fastboot
2. Boot blu_spark TWRP.img - fastboot boot twrp.xxx.img
3. Flash OOS 5.1.11
4. Flash blu_spark TWRP.zip to get it on both slots
5. Reboot to RECOVERY
6. Flash OOS 5.1.11
7. Flash blu_spark TWRP.zip
8. Factory reset in TWRP
9. Flash Havoc Oreo zip
10. Flash blu_spark TWRP.zip
11. Reboot to RECOVERY
12. Flash GApps
13. Flash Magisk (optional if you want root)
14. Flash no-verity if you plan to run unencrypted. (optional)
My advice is to READ READ READ before going forward with anything. The A/B partition layout is far from the traditional days of a single partition layout with a recovery partition. Educate yourself or risk bricking your device and opening up a whole different set of problems.
i do this by step by step but now iam bricked. after all it want restart but it glows only the blue led
RockstarLover said:
i do this by step by step but now iam bricked. after all it want restart but it glows only the blue led
Click to expand...
Click to collapse
It does sound like you READ READ READ before proceeding... My steps were not intended as a step-by-step guide, which is why I said the steps "should look like this". You didn't answer any of my questions, so I have no idea where you started from or where things went wrong to get you into this state...
Can you get into fastboot mode?
If so, try this thread first: https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
The fastboot restore method will ONLY work if you know which OOS you were running before you got bricked...
If you can't restore from fastboot images, try this thread: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
I cannot stress enough, you MUST read all the steps and understand what you are doing before doing anything. If you have any questions, ASK before proceeding... Good luck.
thank u for ur help. i used the second method because the first didnt worked and now iam unbricked.
1. You are aware there are two sets of partitions on this device correct?
Click to expand...
Click to collapse
I know it
2. What are you running now?
Click to expand...
Click to collapse
Now iam running Oxygen OS 5.1.5 Android 8.1.0 and Device State is locked
Is this normal that in fastboot shows this bootloader and baseband empty ?
productname - xxx
variant -sdm ufs
bootloader version -
baseband version -
serialnumber - xxxxxxx
secure boot - yes
I want to try again to get havoc oreo. i will w8 for ur response.
RockstarLover said:
thank u for ur help. i used the second method because the first didnt worked and now iam unbricked.
I know it
Now iam running Oxygen OS 5.1.5 Android 8.1.0 and Device State is locked
Is this normal that in fastboot shows this bootloader and baseband empty ?
productname - xxx
variant -sdm ufs
bootloader version -
baseband version -
serialnumber - xxxxxxx
secure boot - yes
I want to try again to get havoc oreo. i will w8 for ur response.
Click to expand...
Click to collapse
You are back up and running, good work! Congrats!
When you say the device is 'locked', you mean the bootloader is locked again? It shows 'Locked' in fastboot? Obviously you need to unlock the bootloader again before proceeding if this is the case...
And 'Yes', it is normal for 'bootloader version' and 'baseband' to be blank. It shows the same on my device anyway, and I can flash custom ROMs with no issues, and everything works.
At this point, you should be able to follow the steps in my post, making sure you first unlock the bootloader (which will wipe all of your data). You might want to format data (not just wipe as well) to start fresh. I would also confirm that there are no issues running Havoc Oreo with encryption (I'd recommend asking the question in the Havoc OnePlus telegram channel, https://t.me/havoconeplus). After people ask to "Why are you running Oreo?!?!", you just might get an answer... I dumped being encrypted after about a week of having this device because it made moving between ROMs more difficult.
In step 14, I mention the no-verity file to remove force encryption. I have attached it to this post. Again, you may want to have /data encrypted (necessity, personal preference etc.) so this isn't mandatory but I found it made flashing different ROM's much easier (personal preference really).
do u know where u find the havoc oreo rom now ? they changed their download directory. and the overview is confusing me.
RockstarLover said:
do u know where u find the havoc oreo rom now ? they changed their download directory. and the overview is confusing me.
Click to expand...
Click to collapse
Looks like they removed Oreo builds, you might be out of luck. Check out XenonHD 8.1 thread if your set on running Oreo, was updated to Dec. Security patch.
hey brother. i have good news. i just want download again havoc oreo cause i deleted the old zip. i had thought maybe the oreo havoc zip was faulty. now i restored it with a restore tool. i tried again and now it works.
IAM ON HAVOC OREO . It starts but now i got a message.
"Android System
A vendor image mismatch has been detected. Typically this means your vendor image is out of date.Please ensure your vendor image matches OPM1.171019.011."
what is this now
RockstarLover said:
hey brother. i have good news. i just want download again havoc oreo cause i deleted the old zip. i had thought maybe the oreo havoc zip was faulty. now i restored it with a restore tool. i tried again and now it works.
IAM ON HAVOC OREO . It starts but now i got a message.
"Android System
A vendor image mismatch has been detected. Typically this means your vendor image is out of date.Please ensure your vendor image matches OPM1.171019.011."
what is this now
Click to expand...
Click to collapse
Did you flash OOS 5.1.11 on both slots? I know you said you were on OOS 5.1.5 when you did the MSM tool restore.
Unsure if the Havoc build you are running requires a certain FW. Usually the devs update the blobs on customer ROMs based on the latest releases of OOS. In this case, 5.1.11 was the last version of OOS Oreo.
i was on 5.1.5 and flashed 5.1.11 on both slots and then i flashed havoc rom
RockstarLover said:
i was on 5.1.5 and flashed 5.1.11 on both slots and then i flashed havoc rom
Click to expand...
Click to collapse
I'd recommend just going to Pie. I haven't run Havoc in over a month but the latest AEX is solid and battery life is excellent. The Pie ROMs have stabilized significantly in the last month.
i just flashed the latest havoc rom now. Really really thanks brother. ur a good boy.
have a good year
Hello,
Right now I am on havoc OS on my tulip. I want to clean flash miui 10 . How can I do that safely using miflash tool? I had heard somewhere that I can only flash back to that exact version from where I flashed custom ROM?
Please help me as I am new to arb and it really confuses me
Download the latest stable build.
http://bigota.d.miui.com/V10.2.2.0....roGlobal_V10.2.2.0.OEKMIXM_5af4a46864_8.1.zip
Then just flash it with TWRP (Pitchblack is recommended) like you would any ROM.
Joomsy said:
Download the latest stable build.
http://bigota.d.miui.com/V10.2.2.0....roGlobal_V10.2.2.0.OEKMIXM_5af4a46864_8.1.zip
Then just flash it with TWRP (Pitchblack is recommended) like you would any ROM.
Click to expand...
Click to collapse
Do i need to re-flash "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers " again when flashing an MIUI ROM with TWRP?
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
I think your device is triggered with anti-rollback. So you cannot install any rom with build less than 11.0.15.0 that is poco x2 11.0.7.0 cant be flashed. So, you have to wait until new poco build greater than 11.0.15.0 and then flash it. Until then, flash your existing rom or some custom rom. Do it carefully and dont ever flash older roms from now, if something goes wrong, your device will hardbrick and you will have to go to service center where they have authorized EDL access to your device to flash things. Best of Luck.
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
vivek12341 said:
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
Click to expand...
Click to collapse
@eagle06 am worried about 11.0.15.0 > 11.0.7.0 which will trigger ARB as @vivek12341 has pointed out and it will hard brick the device, from what I have read around, hence this post if anybody knows a way out. There seemed to be workarounds initially when Xiaomi introduced ARB, I have not seen anybody mentioning such things in recent times especially for MiUI 11.
The reason why I moved to 11.0.15.0 is was, as it has no bloatware etc, and I did NOT know about ARB, now that I have 11.0.15.0 most of the custom ROMs are based on Poco X2 11.0.7.0 and I am facing issues flashing ROMs based on 11.0.7.0, as the format data from TWRP does not wipe properly + I see 98% of the time device goes to fastboot mode even if I flash Poco stock recovery and clear the data, seems like 11.0.15.0 is also an issue
May be I will have to wait till Poco releases updates > 11.0.15.0 or for MiUI 12. Actually I still dont know, not many know much on this subject.
crDroid works without any issues (which is what my current daily driver, its a very stable ROM), flashing on 11.0.15.0 after clearing data, also any ROM whose dev releases fastboot ROM's those also I can flash and boot without issues, rest all ROM's dont and end up back in fastboot mode
coolcorner said:
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
Click to expand...
Click to collapse
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phoenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one.
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
eagle06 said:
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phonenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one. e
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
Click to expand...
Click to collapse
1. Which script are you talking about? I could not find any script. check attached snapshot.
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too?
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow!
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
jngiag said:
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Click to expand...
Click to collapse
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
coolcorner said:
1. Which script are you talking about? I could not find any script. check attached snapshot.
Its in META-INF/com/google/android/ file name updater-script. Change getprop("ro.product.device") == "phoenixin" || this to getprop("ro.product.device") == "phoenix" || . Why we are doing this? because we are using k30 twrp.. there is no special twrp for poco x2. phoenix = k30, phoenixin=poco x2
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too? Any rom
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow! Yes with twrp. When you flashed twrp recovery , your device is now treated as K30 in twrp space
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?check Pm , cant post telegram links here
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?Theres no K30 global.., poco x2 rom is global, k30 roms is china and there is eu custom rom based on chinese roms
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
Whenever you want to use custom rom without vendor , you need to flash either 11.0.0.7 zip or 11.0.0.7 vendor zip before flashing that custom rom
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
Check my replies in blue
coolcorner said:
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
It is a chinese rom. You can select english as your default language. It really doesn't matter as you are going to wipe it anyway if your purpose is to use it for flashing custom roms.
[Deleted]
coolcorner said:
Just now I tried flashing V11.0.15.0.QGHCNXM using Mi Flash tool, and I hit Anti Roll back error again. Not sure what I am missing here I am on same version 11.0.15.0 EU ROM which has same Anti 2, not sure why the error this time?
Click to expand...
Click to collapse
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
Click to expand...
Click to collapse
Thanks, really appreciate your quick revert. I am trying out with xiaomitool now. I know TWRP method is simple, just edit/change the devicename. But, I am **** scared after seeing ARB error so many times. So using xiaomitool as you mentioned use it to overcome ARB error. I will update how it goes.
I thought Xiaomi is dev/custom dev friendly, seeing all these errors, no wonder why people resent MiUI so much, of course the hardware + price is good. From my search even Google on their devices is not this harsh about ARB blocking after unlocking bootloader.
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
Click to expand...
Click to collapse
Thanks for the vendor image link.
Oh! yeah I am back in Poco 11.0.7.0 image, xiaomitool worked without issues. Thanks to you!!
@eagle06 do you know in this entire image (attached file) list (from tgz file) which is fastboot file? The reason I ask is, in Poco X2 in fastboot mode I see a single deadpixel, whereas when I was in EU MIUI I never saw that dead pixel. I plan to replace that file with EU MIUI fastboot image file, so when am in fastboot, it is clean without any dead pixels.
That small white pixel in fastboot is normal. All users have it including me.
Pic
eagle06 said:
Pic
Click to expand...
Click to collapse
Yep right that is the one. When I was on EU Miui, that one did not have, hence asked which is the image file for fastboot, thought I would flash that or replace next time I flash Poco stock when I am installing new custom ROM.
Yes, its a trivial thing can be ignored, does not really bother or harm.
BTW, so now that I am back in Poco X2 stock (On top of that I have installed BlissROM), next time I have to flash I can use either TWRP or Xiaomitool/V2.
1. For TWRP, I need to rename devicename to phoenix from phoenixin in updater-script and flash it using TWRP after clearing data
OR
2. I can use Xiaomitool/V2 with ADB debugging on (same step as last time)
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
jngiag said:
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
Click to expand...
Click to collapse
Woah! Miflash tool kept throwing errors at me and you are saying it worked for you? Phew!!
If I had flashed using TWRP, I might have been holding a 200gm brick in my hands LOL. Got lucky by using Xiaomitool/v2 then Thanks to you. I will stick to Xiaomitool for flashing stock ROMs hence forth.
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash