I bought it via https://chicmiya.com/collections/fashion-trending-1/products/mobile-phone-1 (of course I got screwed)
In the attachments are the specs.
Can anyone look at it a tell me more? How bad are the specs, is it perhaps a copy of known model. Tools I can use? Can I change ROM etc?
TIA
Related
Hi guys!
I have found a device (look at photos), it's chinese Htc touch (named NTC) with same hardware and windows mobile 6.1 Professional. The question is: can I install other windows mobile (normal Russian). And shant I have problem after that?
As always copies are tacky
Smolikrv said:
Hi guys!
I have found a device (look at photos), it's chinese Htc touch (named NTC) with same hardware and windows mobile 6.1 Professional. The question is: can I install other windows mobile (normal Russian). And shant I have problem after that?
Click to expand...
Click to collapse
Well if you haven´t buyed I recommend no to...
If you already buyed expect bad quality and short duration in general.
EDIT: Erased comment after reading Mod after post
It is very hard to flash the device with other ROMs.
They are known to have DIFFERENT hardware (so the drivers aren't compatible). Even the clones are different from each other..
They have different bootloaders, so our methods of hardSPL etc won't help.
Next to that, there is the quality issue, it is not even close to the quality of an HTC device.
So to sum it up:
-bad quality, no support, no availability of cooked ROMs, no warranty..
I would say, stay clear from it!
Regards,
EqX
Thanks guys, you helped me so much, thanks to you I haven't bought it)). The prices difference between original htc and clone is 100$, so i'd better buy an original one
Hi,
I've been looking at taking a deeper look into the RADIO (GSM) roms of the Kaiser (TyTN II). I'm trying to understand the memory partitioning on the unit.
I've checked using pdocread.exe and I get the following partition sig's:
1) handle c74c0e3a 1.84G (0x759ef200)
2) handle 47474612128.25M (0x8040000)
3) handle 87493b76 79.50M (0x4f80000)
4) handle c7493b52 2.75M (0x2c0000)
5) handle 67493982124.00k (0x1f000)
Ok the 1 is my SD and 2 is my internal storage. 3 is the OS, but 4 and 5?
What would go into the 125k partition (5)?
I've also noticed that pdocread.exe doesnt behave the same as it would on my ipaq. I've got a feeling that orange (UK) has bricked this pretty well.
Are there any DoC usernames on the orange (UK) units?
Secondly, I've managed to tear apart the stock ROM which the Orange UK website are offering as an update.
I've notice an 00_Unknown.nf file which is NOT signed. Are there any other known ways of reading this ROM image?
Where can I get some chipset specs for the TyTN II? I've had a look at the service manual (which I've attached) and there isnt much in there in regards to the actual architecture :-(
I believe that I could put my cpp and MC programming skills to use and come out with some slightly more efficient ROMS. (my work seems to work on most of our PLC bots at the factory)
I'm also gunning to look at the D3D drivers, as I also believe, as do many, that they are dicky and inefficient!
Anyway, some input would be appreciated.
Ok, so I'm pretty new to this whole Android thing, but I'm not daft and know a think or two about computers and software, so I'm not a complete 'noob'...
However, to spare me the drama of trawling through thousands of pages, I have a few quick concise questions, and would appreciate concise answers.
So I bought a generic handset, branded as an Onyx Dragon though AnTuTu benchmark app tells me its a Yusu... details and specs from Chinavision.com (search Onyx Dragon).
I initially bought it because I needed a new phone (been on a Moto V3 Razr for about 6 years!) so got this cos it was cheap and looked good. Runs Froyo on what I have found to be pretty **** hardware (MT6516, advertised as 416MHz but shown to be around 207MHz, but not sure if this is main CPU or radio core...) with not a lot of RAM. I installed an 8Gb SD card to save the apps and keep as much free internal space as possible, in case the OS supports disc memory (?). The wireless is good and screen works well, but the GPS, navigation and camera are rubbish, but they are not why I bought it; I have a decent camera and I can read a map. Its definitely 'entry level' so I'm not too bothered if I brick it.
Since I got it, and seeing the many cheap 'clones' out there, I'm keen to get into them a bit more and start developing. I already rooted it with z4root, BusyBox and Superuser all installed fine. ROM Manager is running but because I don't know the actual brand I'm not yet running ClockWorkMod (doesn't show up in the list). I'm keen to install Gingerbread or maybe even CyanogenMod 7, but cannot flash the ROM without CWM. Can anyone tell me what phone 'model' I should use for this particular handset?
I can't overclock the chipset, but have been looking at other clones to play with, such as htc Incredible G11i Pro clone from etotalk.com and 'CyberStar' 3G handset with MT6573 650MHz chipset (also from Chinavision).
Does anyone have any knowledge/experience with these clones? They look great and if they work as well as the budget model I have now then there is certainly potential. Sure, they may not be as good as a genuine Galaxy or Nexus, but then the price reflects that. However, as a cheap development platform you can't really go wrong! I'd like to see faster processors and more hardware mod ability such as clocking, just to see what is possible. Anyone tried ICS on one of these? I read elsewhere that if Froyo runs ok on a cheap device then GB should be better. My friend has GB 2.3.3 on a genuine $500 Galaxy S2 and I'd love to show him up with a rooted and clocked clone running ICS for a fraction of the price!!
Well, thats not as concise as I would like, but it covers pretty much everything. One last thing though, I cannot install ES File Explorer 1.6.1, it will download from Market and attempt to install but then fail. The latest version I have is the pre-installed 1.4.2.2. I've tried everything I can think of; downloading on my Mac and copying via USB to install from Astro making sure ES is not running, failed. Tried uninstalling ES with ROM Toolbox having root access and disabled AVG, failed. Tried to launch new version from package options, failed. I have installed ES Task Manager v1.2 but cannot use all the features as it says File Explorer needs to be updated, and needless to say updating it from the prompts failed as well... Any ideas? I'm thinking a flash to GB should include the latest version (or better alternative).
Thanks all in advance!
I don't think it's possible to run ICS on such a low spec'd device. This onyx dragon runs on a 416Mhz ARM9 processor with a 200 Mhz ARM7 GPU. Even the G1 that uses a 528Mhz ARM11 CPU can't run ICS well. I would suggest that you give up on theses crappy chineses devices. If you don't have money you can find a LG Optimus One for 100 bucks on ebay and it is A LOT better than any of these chinese crap phones
Sent from my GT-I9100 using XDA App
For CWM, take a look at this site http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html and the quote below
Don't see your phone? Email me if you want to help me get it working!
And of course, all the source can be found on Github.
Click to expand...
Click to collapse
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hey all, thanks for the feedback. Basically, sure I don't want to spend a lot being a student, I don't have a lot, but I'm keen to get more out of what I can afford, hence the Chinese crap (yes it is crap but if it does what you need...) : ) just a shame I can't clock mine! Does anyone know if ANY MediaTec chips can be?
Sure, I think running ICS is a bit optimistic, but I'd still like to give GB or C-Mod a go, providing I can get CWM installed. I'd like to compile myself and even think about refining my own version, perhaps slimming down a newer version to run on low performance hardware. What's this about a special cable needed with a 3.5mm jack?
And am I right in thinking Honeycomb was only for tablets, not phones...?
droidscope said:
Hey all, thanks for the feedback. Basically, sure I don't want to spend a lot being a student, I don't have a lot, but I'm keen to get more out of what I can afford, hence the Chinese crap (yes it is crap but if it does what you need...) : ) just a shame I can't clock mine! Does anyone know if ANY MediaTec chips can be?
Sure, I think running ICS is a bit optimistic, but I'd still like to give GB or C-Mod a go, providing I can get CWM installed. I'd like to compile myself and even think about refining my own version, perhaps slimming down a newer version to run on low performance hardware. What's this about a special cable needed with a 3.5mm jack?
And am I right in thinking Honeycomb was only for tablets, not phones...?
Click to expand...
Click to collapse
Yes you are right about honeycomb. As for the device. Without kernel source which will never be released due to copyright issues you may have a bit of trouble Modding it. CM only supports authentic devices and not clones as the hardware specs as you learned are faked and never true.
droidscope said:
Hey all, thanks for the feedback. Basically, sure I don't want to spend a lot being a student, I don't have a lot, but I'm keen to get more out of what I can afford, hence the Chinese crap (yes it is crap but if it does what you need...) : ) just a shame I can't clock mine! Does anyone know if ANY MediaTec chips can be?
Sure, I think running ICS is a bit optimistic, but I'd still like to give GB or C-Mod a go, providing I can get CWM installed. I'd like to compile myself and even think about refining my own version, perhaps slimming down a newer version to run on low performance hardware. What's this about a special cable needed with a 3.5mm jack?
And am I right in thinking Honeycomb was only for tablets, not phones...?
Click to expand...
Click to collapse
Hi droidscope,
Not all the Chinese phones are crap there are a few very capable phones now entering the market and they are catching up the bigboys rapidly.
For more info & reviews on the latest Chinese phones check over here http://www.gizchina.com/category/phones/ Try to stick with the branded chinese phones such as Zopo, ZTE, Newman etc because there is at least some support where as the direct copy/clones have no support at all. If buying try to get the phone pre rooted because some of the Chinese phone are getting more difficult to root. I would look here http://www.etotalk.com/ if buying and select the MOD ROM $4.99 for most phones then the phone will come pre rooted with working playstore language etc. They do not 1 to 1 copys although some of the phones have more than a passing look of some of the more famous brands. I have used them a few times and they have not let me down be sure to email them first to ask about stock levels though.
hello everyone,
i am planing to purchase lumia 800 but i have few doubts regaurding this phone
here they go:-
1. how is the battery backup ?
2. will there be no upgrade after the 7.8 ?
3. is the white version built of same polycarbonate non painted material?
4. is there a way for bluetooth file transfer?
plz reply soon...
1. I assume you mean battery life? It's supposed to be "fixed" now with the latest Nokia firmware, but it's still no better than average for a smartphone.
2. Nobody knows. We don't even know everything that 7.8 will have. There's a possibility of a 7.9, I guess, but I'm not expecting it.
3. Unknown, but probably. You can probably find a detailed spes sheet online.
4. Not currently. There was a way to install custom ROMs on some Lumia 800s, but it requires an old bootloader that new phones don't ship with.
1) I'm hoping someone can advise pls! I'm a very light user mostly for wsapp and sometimes maps/gps when walking (no gaming and occasionally watch youtube videos) so was hoping to find something £40-£50.
https://www.ebay.co.uk/itm/M20-Pro-...var=564119885073&_trksid=p2055119.m1438.l2649
There are others I'm looking at but they don't mention anything about the processor (sometimes it'll mention the number of cores but no name)? The specs seem way better than even xiaomi phones for the same money, I know there's gonna be no support updates etc. how important is that? Couldn't I just search for a custom ROM, try to upgrade to higher android version etc? Would it be difficult/impossible to find roms for an unbranded phone?
Also I've read that there's a possibility they could just be sneaky re-brands so potentially could be getting a xiaomi etc. phone for less?
2) I'm also considering paying a bit more if unbranded is a no-go. Xiaomi Redmi 7 3GB/32GB around £100 vs Xiaomi Mi Play 4GB/64GB if it's £6 more?
I like the extra ram and storage for only £6 more but the battery seems better on R7 and larger screen
MTK devices
supashaka said:
1) I'm hoping someone can advise pls! I'm a very light user mostly for wsapp and sometimes maps/gps when walking (no gaming and occasionally watch youtube videos) so was hoping to find something £40-£50.
https://www.ebay.co.uk/itm/M20-Pro-...var=564119885073&_trksid=p2055119.m1438.l2649
There are others I'm looking at but they don't mention anything about the processor (sometimes it'll mention the number of cores but no name)? The specs seem way better than even xiaomi phones for the same money, I know there's gonna be no support updates etc. how important is that?
Click to expand...
Click to collapse
I've seen some advertisements (on wish.com or Ali Express) for devices with no apparent name brand that mention having 10 core processors, dual sim, Android 9 and more. These are all MTK devices which pose difficulties if you want to flash a ROM into them to upgrade or change something. RCA tablets are MTK devices and I, along with many others have spent a lot of time just trying to gain access to such devices. It's been done. However, it has been more than difficult as of yet to find any compatible ROMs and these devices are extremely picky when it comes to using other ROMs. For those of us that are currently still working on it, we have yet to find anything compatible. That's not saying they are bad devices, they are actually pretty good I've had mine (the RCA Maven, Viking and Galileo) for years with little problems.
Casper Young said:
I've seen some advertisements (on wish.com or Ali Express) for devices with no apparent name brand that mention having 10 core processors, dual sim, Android 9 and more. These are all MTK devices which pose difficulties if you want to flash a ROM into them to upgrade or change something. RCA tablets are MTK devices and I, along with many others have spent a lot of time just trying to gain access to such devices. It's been done. However, it has been more than difficult as of yet to find any compatible ROMs and these devices are extremely picky when it comes to using other ROMs. For those of us that are currently still working on it, we have yet to find anything compatible. That's not saying they are bad devices, they are actually pretty good I've had mine (the RCA Maven, Viking and Galileo) for years with little problems.
Click to expand...
Click to collapse
Thanks for the reply. Any MTK processor devices are difficult/unlikey to have custom roms or tweak/upgrade in any way?
MTK devices
supashaka said:
Thanks for the reply. Any MTK processor devices are difficult/unlikey to have custom roms or tweak/upgrade in any way?
Click to expand...
Click to collapse
Theoretically there should be, but many here would rather work on the newest devices most of which are not MTK (Media Tek). They're not built like Samsungs and if you open one up the whole motherboard is the size of today's phones or roughly one quarter the size of the tablet which could be the reason they're so cheap. The only thing I've been able to flash into mine is the original stock firmware, anything else led to bricking. And recovering from a brick is difficult the SP Flash tool is nothing like the Odin3 we use for Samsungs.
Casper Young said:
Theoretically there should be, but many here would rather work on the newest devices most of which are not MTK (Media Tek). They're not built like Samsungs and if you open one up the whole motherboard is the size of today's phones or roughly one quarter the size of the tablet which could be the reason they're so cheap. The only thing I've been able to flash into mine is the original stock firmware, anything else led to bricking. And recovering from a brick is difficult the SP Flash tool is nothing like the Odin3 we use for Samsungs.
Click to expand...
Click to collapse
I have also bought uhans u300 and took a look at the Development & Support topic here, there's absolutely no way to upgrade it from Android 6.0?