https://www.amazon.in/dp/B0848QZ355/ref=cm_sw_r_wa_apa_i_QiPrEbJNMXEYV
Used this screen guard on my Note 10 Lite. After application and ensuring no bubble anywhere near the finger print scanner switched it in.
At the first shot it did not read the prints. However after deleting the stored prints and registering them once again they worked well.
A little extra pressure was required for a good read.
Pressure sensitivity for the SPen was also Ok
Only issue is that it's not an edge to edge screen guard. However I'm ok with it as does not snag onto the edges of the case when taking the phone out for cleaning.
Any case you have ordered for it
CharlieGarg said:
Any case you have ordered for it
Click to expand...
Click to collapse
Using the one which comes in the box from Samsung.
Please post pic of the phone with the screenguard installed.
miss_p1nky said:
Please post pic of the phone with the screenguard installed.
Click to expand...
Click to collapse
Hope this helps
zebelchior said:
Using the one which comes in the box from Samsung.
Click to expand...
Click to collapse
Can you write all the way to the edge of the screen? I saw one report that with Samsung Notes app this wasn't possible.
joarce said:
Can you write all the way to the edge of the screen? I saw one report that with Samsung Notes app this wasn't possible.
Click to expand...
Click to collapse
No a small bit gets left out. However while naturally writing it's not noticible but while sketching sometimes there is a drop off as you reach the edge of the screen guard..
I use this one : perfect, no difference with or without !
https://www.amazon.fr/gp/product/B083J8W3Z9/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
zebelchior said:
Using the one which comes in the box from Samsung.
Click to expand...
Click to collapse
My *DBT Version does not contain a cover.
no cover for me too (XEF) ! and no case !
I use this one, works even better than with the Samsung preinstalled.
https://www.amazon.com/OMOTON-Scree...ite&qid=1599448514&sprefix=omo,aps,285&sr=8-3
zebelchior said:
https://www.amazon.in/dp/B0848QZ355/ref=cm_sw_r_wa_apa_i_QiPrEbJNMXEYV
Used this screen guard on my Note 10 Lite. After application and ensuring no bubble anywhere near the finger print scanner switched it in.
At the first shot it did not read the prints. However after deleting the stored prints and registering them once again they worked well.
A little extra pressure was required for a good read.
Pressure sensitivity for the SPen was also Ok
Only issue is that it's not an edge to edge screen guard. However I'm ok with it as does not snag onto the edges of the case when taking the phone out for cleaning.
Click to expand...
Click to collapse
That product is oos. How long did it last for? Any alternative?
joarce said:
Can you write all the way to the edge of the screen? I saw one report that with Samsung Notes app this wasn't possible.
Click to expand...
Click to collapse
I second that it's not possible. Any reasoning behind this?
Related
while I play with my girlfriend smart cover with my note 10.1
i find out while screen off ,if take out the s-pen will be screen on
and accidentally find that,when the magnet touch the area which hide the s-pen,will make it screen on
I'm thinking of how to make it work with opening the cover,and a question,would it break the function of the spen
http://youtu.be/f56AwD78fPQ
koman2 said:
while I play with my girlfriend smart cover with my note 10.1
i find out while screen off ,if take out the s-pen will be screen on
and accidentally find that,when the magnet touch the area which hide the s-pen,will make it screen on
I'm thinking of how to make it work with opening the cover,and a question,would it break the function of the spen
Click to expand...
Click to collapse
I'm guessing you're in Asia. The Book Cover isn't being released in the EU and US until later this month so I doubt there will be a lot of people that can help you.
BarryH_GEG said:
I'm guessing you're in Asia. The Book Cover isn't being released in the EU and US until later this month so I doubt there will be a lot of people that can help you.
Click to expand...
Click to collapse
yes, i'm form HK ,but don't have the book cover or other case either
just use the ipad cover to find it out,or using a magnet
koman2 said:
yes, i'm form HK ,but don't have the book cover or other case either
just use the ipad cover to find it out,or using a magnet
Click to expand...
Click to collapse
The "official" Book Cover a lot of us are waiting for has magnets in it too. So I'm guessing it's not the magnet itself but where it's hitting your Note.
I just took a small neodymium magnet (very strong) and ran it over the entire front, back and around the edges of my Note 10 and nada. Didn't wake it up. It did, however, stick to the speaker magnets.
TheWerewolf said:
I just took a small neodymium magnet (very strong) and ran it over the entire front, back and around the edges of my Note 10 and nada. Didn't wake it up. It did, however, stick to the speaker magnets.
Click to expand...
Click to collapse
Was you S-pen in its slot at the time? If so, maybe take it out then try again, just to see what happens?
Anyone knows where can I order a Touchplus screen protector online for Honor X2?
hagba said:
Anyone knows where can I order a Touchplus screen protector online for Honor X2?
Click to expand...
Click to collapse
that would be really interesting
I have been looking and can't find it no where.
I've also searched the entire net but can't find it nowhere.
Does anyone know what technology is used in that screen protector. We can try to make our own if we new that.
The Navigation bar will move to the bottom bezel after you deactivate and close it in the Settings, while the upper bezel corners will activate certain apps like camera etc.. when swiped.
hagba said:
The Navigation bar will move to the bottom bezel after you deactivate and close it in the Settings, while the upper bezel corners will activate certain apps like camera etc.. when swiped.
Click to expand...
Click to collapse
What's the material those buttons are made of. Chrome, magnet, etc.
mtyler7807 said:
What's the material those buttons are made of. Chrome, magnet, etc.
Click to expand...
Click to collapse
They are just prints on the protecting screen.
the picture I've attached is Touchplus for Huawei P8.
Pls notice the printed buttons at the buttom. .
hagba said:
They are just prints on the protecting screen.
the picture I've attached is Touchplus for Huawei P8.
Pls notice the printed buttons at the buttom. .
Click to expand...
Click to collapse
I hope we can find somewhere this Screen Protector
letschky said:
I hope we can find somewhere this Screen Protector
Click to expand...
Click to collapse
Yea, its interesting looking. Even more screen area *lol*
mtyler7807 said:
Does anyone know what technology is used in that screen protector. We can try to make our own if we new that.
Click to expand...
Click to collapse
They have some inivisible wiring done in that screen protector. the touch on protector's buttons translates to simultaneous touches in certain areas of device. These simultaneous touches can be used to trigger home, back or whatever function huawei has coded in.
bark1234 said:
They have some inivisible wiring done in that screen protector. the touch on protector's buttons translates to simultaneous touches in certain areas of device. These simultaneous touches can be used to trigger home, back or whatever function huawei has coded in.
Click to expand...
Click to collapse
Thanks, thats what i was looking for.
Has anyone found a screen protector on the net yet. I want those buttons bad. Thats about the coolest thing I have seen.
mtyler7807 said:
Has anyone found a screen protector on the net yet. I want those buttons bad. Thats about the coolest thing I have seen.
Click to expand...
Click to collapse
Unfortunately nothing, I'm doing a search everyday but so far just for Huawei P8 but Nothing for X2.
http://www.ibywind.com/huawei-p8-original-touchplus-smart-screen-protection.html?___SID=U
hagba said:
Unfortunately nothing, I'm doing a search everyday but so far just for Huawei P8 but Nothing for X2.
http://www.ibywind.com/huawei-p8-original-touchplus-smart-screen-protection.html?___SID=U
Click to expand...
Click to collapse
Get the feeling it will never be released...
Benjiro said:
Get the feeling it will never be released...
Click to expand...
Click to collapse
There is one thing. The p8 is global with there bands, can be be used any where, has full huawei support from the main site, and since all that is the case the p8 and the p8 maxx would be there flag ships and get the accessories before any of the other phone will even hope to get them. Thats why I am hoping that a china company makes a cheap version of it and I will bet money they will. The way they are sell these phones. They just have to get rid of a few more screen protectors first, they don't want to get stuck with them if everyone move on over to touchplus protectors. I'd pay 30 to 40 bucks for one.
How does this even work? How does the phone know you pressed buttons off the screen?
I love the idea of more screen real estate!
mtyler7807 said:
I'd pay 30 to 40 bucks for one.
Click to expand...
Click to collapse
Same here..
omniphil said:
How does this even work? How does the phone know you pressed buttons off the screen?
Click to expand...
Click to collapse
The software on the phone ( see the Touchplus under your settings ) simply monitors if a signal happened at x location.
Under the touchplus protector there is a micro thin wire going from the front ( where you see the buttons ) to the back ( that touches your screen ).
As you press the button, you create a electric contact with your skin's electricity field, this signal is send to the back of your protector, to the phone where the software picks up this signal on that exact location.
And because the signal is send using a thin wire, its impossible to mistake this with a finger press because our fingers our huge so the location of the electric field is way more massive.
Benjiro said:
The software on the phone ( see the Touchplus under your settings ) simply monitors if a signal happened at x location.
Under the touchplus protector there is a micro thin wire going from the front ( where you see the buttons ) to the back ( that touches your screen ).
As you press the button, you create a electric contact with your skin's electricity field, this signal is send to the back of your protector, to the phone where the software picks up this signal on that exact location.
And because the signal is send using a thin wire, its impossible to mistake this with a finger press because our fingers our huge so the location of the electric field is way more massive.
Click to expand...
Click to collapse
That is pretty impressive to say the least!
I hate on screen buttons as they take away screen real estate. I will definitely be picking one of these up whenever they are available!
I wonder why they didn't just put the buttons down at the bottom of the phone in the first place?
Is anyone having issue settling up the finger unlock. It keeps tell me to press harder, but I press any harder I'm going to break the screen...
networx2002 said:
Is anyone having issue settling up the finger unlock. It keeps tell me to press harder, but I press any harder I'm going to break the screen...
Click to expand...
Click to collapse
if theres a screen protector on the phone, that might be the problem
networx2002 said:
Is anyone having issue settling up the finger unlock. It keeps tell me to press harder, but I press any harder I'm going to break the screen...
Click to expand...
Click to collapse
Did you check to see if there is software update available? T-Mobile version has an update which indicates improvements to the fingerprint, camera, touch screen and so on.
Got it to work! For some reason it doesn't like that finger...
I just got an update for my unlocked version
After update I still have trouble with the sensor. After the fold debacle I'm unsure as to weather or not the clear film on the screen should come off. Those with fp working, have you removed that film?
papashex said:
After update I still have trouble with the sensor. After the fold debacle I'm unsure as to weather or not the clear film on the screen should come off. Those with fp working, have you removed that film?
Click to expand...
Click to collapse
Works fine here with the film. Set the same fingerprint up a few times, and once you get used to how hard/where to touch it, it works fine in my experience.
Mine's working fine. In fact, it's working much better than it did on my S10+ - that was really hit or miss.
Semantics said:
Works fine here with the film. Set the same fingerprint up a few times, and once you get used to how hard/where to touch it, it works fine in my experience.
Click to expand...
Click to collapse
papashex said:
After update I still have trouble with the sensor. After the fold debacle I'm unsure as to weather or not the clear film on the screen should come off. Those with fp working, have you removed that film?
Click to expand...
Click to collapse
it's meant to work WITH the film.
Thanks all. I'm just too used to the light touch / swipe options on the traditional (now obsolete) rear finger print sensor. Retraining required but all good now.
I'm using One hand operation+ with gesture to lock phone. It is Samsung own software so you can use fingerprint to unlock your phone.
Try it
JamesYoutt said:
if theres a screen protector on the phone, that might be the problem
Click to expand...
Click to collapse
This may sound weird, but the other day i replaced the original screen protector that was applied on the phone from factory and applied a new TPU film screen protector, since then the fingerprint scanner has been working perfectly each time. Just a tap like how the Youtube reviewers have mentioned, Never have i ran into "press harder" error message since then.
At first I thought the in-display fingerprint reader was the perfect solution. On my unlocked from Samsung U.S. Note 10+ the fingerprint unlock is very finicky. Of course I removed the plastic screen protector immediately. So the glass display is naked.
If anything will make me take a hammer to this phone and smash it into a pile of pulverized dust it will be the fingerprint unlock. It seems to work best in humid environments. If I were to need to unlock my phone in a hurry (Samsung Pay, boarding a plane), I would enter the pin never fingerprint. This is sad because I was and still am somewhat in love with the Note 10. The fingerprint unlock is driving me to loathe this thing.
JBH_Film said:
At first I thought the in-display fingerprint reader was the perfect solution. On my unlocked from Samsung U.S. Note 10+ the fingerprint unlock is very finicky. Of course I removed the plastic screen protector immediately. So the glass display is naked.
If anything will make me take a hammer to this phone and smash it into a pile of pulverized dust it will be the fingerprint unlock. It seems to work best in humid environments. If I were to need to unlock my phone in a hurry (Samsung Pay, boarding a plane), I would enter the pin never fingerprint. This is sad because I was and still am somewhat in love with the Note 10. The fingerprint unlock is driving me to loathe this thing.
Click to expand...
Click to collapse
Same here. I absolutely loath the fingerprint reader to the point that I wish I had never sold my S10E. It will be the last Samsung phone that I EVER buy if it's not fixed.
Unfortunately, not 100% success in fingerprint unlocking in my note 10. .. I missed my note 9..
gpap2004 said:
Unfortunately, not 100% success in fingerprint unlocking in my note 10. .. I missed my note 9..
Click to expand...
Click to collapse
Add two fingerprints with the same finger, it'll make it faster & more accurate.
Hi,
I just mounted a cheap one bundled with a cover I bought and the fingerprint sensor became near unusable, failing to read like 4/5 of the times... not surprised, I just wanted to start using the phone ASAP before buying a better screen protector.
So, do you have some brand/model that you experienced working good using the fingerprint reader?
Thanks in advance.
P.S.
I noticed that some kits also have an extra glass for the rear cam, it's my first time with such a thick cam so not sure how effective is the protection from the cover only or if the extra glass are 100% needed, what's your advice?
https://www.amazon.com/dp/B0876G3YY8/ref=cm_sw_r_cp_apa_i_I1OjFbCBYCT60
Just got this one, covers the whole screen and fingerprint reader doesn't seem to be affected at all.
Sent from my POCO F2 Pro using XDA Labs
bradipo.xda said:
Hi,
I just mounted a cheap one bundled with a cover I bought and the fingerprint sensor became near unusable, failing to read like 4/5 of the times... not surprised, I just wanted to start using the phone ASAP before buying a better screen protector.
So, do you have some brand/model that you experienced working good using the fingerprint reader?
Thanks in advance.
P.S.
I noticed that some kits also have an extra glass for the rear cam, it's my first time with such a thick cam so not sure how effective is the protection from the cover only or if the extra glass are 100% needed, what's your advice?
Click to expand...
Click to collapse
Did you take off the film screen protector that comes pre installed?
The screen protector in using (will say which if interested) works fine 80 percent of the time right away, but sometimes it takes 2 or 3 tries.
inneyeseakay said:
Just got this one, covers the whole screen and fingerprint reader doesn't seem to be affected at all.
Sent from my POCO F2 Pro using XDA Labs
Click to expand...
Click to collapse
Does it cover the whole of the screen? I bought one and the fingerprint reader works most of the time but the 2/3mm gap all the way around is kind of annoying me!
thanks
m0rtus said:
Does it cover the whole of the screen? I bought one and the fingerprint reader works most of the time but the 2/3mm gap all the way around is kind of annoying me!
thanks
Click to expand...
Click to collapse
I got the same one! Doesn't cover the whole screen either and fingerprint is hit or miss...
Any better alternatives? Especially the fingerprint is annoying at times.
https://es.aliexpress.com/item/4000966563139.html?spm=2114.13010708.0.0.1e2c63c0eUyXOi
nykola5 said:
https://es.aliexpress.com/item/4000966563139.html?spm=2114.13010708.0.0.1e2c63c0eUyXOi
Click to expand...
Click to collapse
Is this truly full screen? There are no pics of users with it actually installed, so can you upload a couple?
And you have no fingerprint issues?
https://c.mi.com/thread-3279420-1-0.html
as described:
1) CIT menu <= dial this : * # * # 6 4 8 4 # * # *
(or *#*#64663#*#* )
2) Go in "3-dots" menu > Additional tools"
3) Find "fod fingerprint calibration"
try to re calibrate the sensor
BTW: i use a screen protector from PKILA (Amazon) without any kind of trouble!
it's a little smaller than the screen because i need more space for the spigen bumper.
German user can use this link :https://www.amazon.de/Pkila-Panzerg...=poco+f2+pro+Pkila+glas&qid=1602062774&sr=8-4
Icetea said:
https://c.mi.com/thread-3279420-1-0.html
as described:
1) CIT menu <= dial this : * # * # 6 4 8 4 # * # *
(or *#*#64663#*#* )
2) Go in "3-dots" menu > Additional tools"
3) Find "fod fingerprint calibration"
try to re calibrate the sensor
BTW: i use a screen protector from PKILA (Amazon) without any kind of trouble!
it's a little smaller than the screen because i need more space for the spigen bumper.
German user can use this link :https://www.amazon.de/Pkila-Panzerg...=poco+f2+pro+Pkila+glas&qid=1602062774&sr=8-4
Click to expand...
Click to collapse
I just tried that and now it doesn't recognize any of my fingerprints! ?
Maybe I did something wrong?
Have you deleted your registrated fingerprints first?
Have you rebooted? Re calibrate it again.
At a other forum somebody else has tried this procedure with a sheet of black and a sheet of white paper.
I have not tried this procedure because my sensor is working well.
Icetea said:
Have you deleted your registrated fingerprints first?
Have you rebooted? Re calibrate it again.
At a other forum somebody else has tried this procedure with a sheet of black and a sheet of white paper.
I have not tried this procedure because my sensor is working well.
Click to expand...
Click to collapse
The instructions aren't clear (it mentions a mirror?) and they're very vague...
I was forced to delete my fingerprints because they just weren't recognized. Not that it's not a good idea, but it would be nice to have clearer instructions. Thanks for the efforts!
here is where I first found this suggestion:
https://xiaomi.eu/community/threads/does-not-detect-the-fingerprint.56616/
try nillkin xd cp+ max
Icetea said:
https://c.mi.com/thread-3279420-1-0.html
as described:
1) CIT menu <= dial this : * # * # 6 4 8 4 # * # *
(or *#*#64663#*#* )
2) Go in "3-dots" menu > Additional tools"
3) Find "fod fingerprint calibration"
try to re calibrate the sensor
BTW: i use a screen protector from PKILA (Amazon) without any kind of trouble!
it's a little smaller than the screen because i need more space for the spigen bumper.
German user can use this link :https://www.amazon.de/Pkila-Panzerg...=poco+f2+pro+Pkila+glas&qid=1602062774&sr=8-4
Click to expand...
Click to collapse
I think I need to calibrate my fod, it's fails to recognise my fingerprint most of the time , mostly when I've got a tempered glass screen protector on but even without its not great
I've now ordered one that's been recommended in this thread
While I wait for that to arrive, has anyone tried to recalibrate the fod with a screen protector on?
Fingerprint solution :
https://forum.xda-developers.com/k20-pro/how-to/fix-fingerprint-unlock-custom-roms-t3955844/
eliazu said:
Fingerprint solution :
https://forum.xda-developers.com/k20-pro/how-to/fix-fingerprint-unlock-custom-roms-t3955844/
Click to expand...
Click to collapse
Works for me, thank you :highfive:
1525 Calculate PGA gain error
Icetea said:
https://c.mi.com/thread-3279420-1-0.html
as described:
1) CIT menu <= dial this : * # * # 6 4 8 4 # * # *
(or *#*#64663#*#* )
2) Go in "3-dots" menu > Additional tools"
3) Find "fod fingerprint calibration"
try to re calibrate the sensor
BTW: i use a screen protector from PKILA (Amazon) without any kind of trouble!
it's a little smaller than the screen because i need more space for the spigen bumper.
German user can use this link :https://www.amazon.de/Pkila-Panzerg...=poco+f2+pro+Pkila+glas&qid=1602062774&sr=8-4
Click to expand...
Click to collapse
i try to calibrate and i get this error
anyone have a solution?
Screen protector
bradipo.xda said:
Hi,
I just mounted a cheap one bundled with a cover I bought and the fingerprint sensor became near unusable, failing to read like 4/5 of the times... not surprised, I just wanted to start using the phone ASAP before buying a better screen protector.
So, do you have some brand/model that you experienced working good using the fingerprint reader?
Thanks in advance.
P.S.
I noticed that some kits also have an extra glass for the rear cam, it's my first time with such a thick cam so not sure how effective is the protection from the cover only or if the extra glass are 100% needed, what's your advice?
Click to expand...
Click to collapse
Just fitted ******* screen protector with great results and finger print reader working fine
Couldn't be happier
mine works fine with a cheap aliexpress screen protector. i did get one that just covers the screen, cause i use a case them anti choc ones with big corner bumper i love them, fit great and gives a lip at the front so the screen doesnt hit first.
but after the install u need to remove all finger prints at reput them.
works fine but i still hate underscreen ones... when ever my fingers are dry or dirty it wont do anything.. while real finger prints always work even with greas or oil on my fingers still unlocks....
SEAH said:
1525 Calculate PGA gain error
i try to calibrate and i get this error
anyone have a solution?
Click to expand...
Click to collapse
I have the same problem right now. Have you fixed it? if yes how?
find out when I install my screen protector and pull it out for the third time, it's very sticky
[deleted]
It's more sticky than the Samsung fold 2 or 3 factory screen protector. Wouldn't have a problem screen lifting.
dragonnightx said:
find out when I install my screen protector and pull it out for the third time, it's very sticky
Click to expand...
Click to collapse
Any issues since you took it off?
dallas1164 said:
Any issues since you took it off?
Click to expand...
Click to collapse
Nope everything is fine. Only issue is finding a screen protected that would fit perfectly. Most are slightly to big, leaving a air bubble every time you close next to every edges and will leave a line across the screen which never go away. I bought over 20 screen protector used about now 9 found what fit now and line goes away.
dragonnightx said:
Nope everything is fine. Only issue is finding a screen protected that would fit perfectly. Most are slightly to big, leaving a air bubble every time you close next to every edges and will leave a line across the screen which never go away. I bought over 20 screen protector used about now 9 found what fit now and line goes away.
Click to expand...
Click to collapse
Awesome! Glad to hear that. Thanks for the info!