Greetings, ever since i tried rooting my phone, i knew something went wrong (i used cf autoroot).
So the first thing i noticed, i was asked to reset the phone or something similar to that, meaning i would lose all my data.
I tried to find a workaround as this had never happened to me before while rooting a phone, and someone had said that i was supposed to download twrp
and change some partition and then change it back. I dont remember what else he mentioned and what exactly i tried doing, i realised it was formatted either way and i had to start fresh. As i setup my phone i went and switched the oem unlock back to "off", as i did not wanna attempt to root again, but i hadn't realised that my phone was infact rooted sucessfully, leading me to my first error after restarting. "Custom binary blocked by frp lock", with absolutely no access to recovery mode at all anymore. Again, trying to find a workaround, i download some stockfirmware that i atleast had hoped was the right one for my phone, after a couple failed attempts of flashing with odin, ( i had gotten various different error messeges on download mode screen such as (REV Check fail device 7 binary 0 and others witch i cannot remember), now im getting a new error screen, stating that an error has occured while updating the device software. I cant flash twrp recovery as the frp lock is on, and the only thing i can guess is that im flashing the wrong firmware, but i cant find a matching code at all.
Its the following: sm-g930fzkadbt
IMEI: 35214310282955
on the back of the phone it says uk yateley, although the phone was purchased in germany.
Im not sure what to do anymore, any advice would be greatly appreciated.
PS: I have managed to get back to the old error screen with the custom binary info, this time with bootloop, by checking the deviceinfo box on odin
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
cooltt said:
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
Click to expand...
Click to collapse
Thanks for your reply, just a question, will any btu update work? Should i download latest android version btu firmware?
(Also yes, it was stupid of me to try and do it quick but i had rooted 3 different samsung galaxy phones in the past without issues, either i did something wrong or it took something way too specific to do the job, perhaps the phone's unrootable, but thank you either way) :fingers-crossed:
Elef244 said:
Thanks for your reply, just a question, will any btu update work? Should i download latest android version btu firmware?
(Also yes, it was stupid of me to try and do it quick but i had rooted 3 different samsung galaxy phones in the past without issues, either i did something wrong or it took something way too specific to do the job, perhaps the phone's unrootable, but thank you either way) :fingers-crossed:
Click to expand...
Click to collapse
You'll likely only find the last version of BTU think it was August 2019. It isn't updated officially anymore but it'll be fine to use.
cooltt said:
You'll likely only find the last version of BTU think it was August 2019. It isn't updated officially anymore but it'll be fine to use.
Click to expand...
Click to collapse
I've found android 6 to android 8 with all the monthly updates, im just trying the latest of the latest though i dont remember my android version, ill try android 7 and 6 if that doesn't work, thanks again. I'll make sure to reply if this works or doesn't.
cooltt said:
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
Click to expand...
Click to collapse
OK so i thought it worked but i can only enter recovery mode now and download mode, but cant actually boot the system, it just boots up the battery screen whenever i plug the charger, and never shows the actual battery info, just the thunder icon. Formatting from recovery mode doesn't help either (Note whenever i launch recovery mode it says installing update, then says no command and brings me to the recovery menu) Any ideas?
PS: It fixed itself. Sorry for the pointless edit.
Related
Hello everybody,
I usually find my answers in the specific phone related forums. But this time I'm stuck.
A friend of mine bought a Samsung Galaxy J7 (SM-J700F to be specific) in India. After using his phone there he came back home to Israel.
His phone didn't worked here for some reason and he went to a phone lab which flashed his ROM to stock Israel ROM.
They called him in the middle of the process and asked him what was his Google account thet he signed to while the first setup. Unfortunately, he cant remember his email address.
I took the phone to try bypassing the frp lock.
After a small search I realized I need an otg cable, which I bought.
I received the cable (1.5 mounths wait) and tried the otg cable method with no success.
After some experiments I successfully managed to open the settings menu. Pressed factory data reset and after a restart it stopped on recovery menu with the yellow message "dm-verity verification failed".
Well, this is annoying. I realized I need to flash the stock ROM again(Dated 01/16). So I did And the message dissapperd.
Back to the FRP lock issue. I did the process again and it didn't stopped in the recovery mode this time and I could see the Android logo with a little erasing.. Under it. Finally I thought.
I was wrong.
The FRP lock is still there! Dammit.
It is time to pull the big guns.
I thought I will flash the OLDER version of the stock ROM. Dated 09/2015 I Understand google updated the FRP lock protection on January 2016. Is the downgrade OK? I don't know if a downgrade is possible on Samsung phone.
And if you have an idea how to bypass this. Please share it.
Thank you so much!
Hello epopcop
I try so hard for three days like ure problem
The issue not from odin or pc
Th problem from samsung you cannot downgrade any update
So maybe u use software sysgem update and install it on ure device
So you cannot use any old firmware
(You shloud last updated firmware)
Link
Sorry just search in androidfilehost make a search for j700f and download the 2016 firmware
I cannot post links sorry
Use it and live ure life happy
Wishes
Hi there,
I have a Samsung Galaxy Tab A6 (SMT-580) which I bought today. I followed this tutorial to install twrp, ultimately to root the device:
dottech .org/200476/how-to-install-twrp-recovery-on-samsung-galaxy-tab-a-sm-t580/
Everything worked fine and I was able to boot and reboot fine. Until I signed in with my Google Account. After trying to reboot, I get a black screen with the Samsung logo and a text in red saying: Custom binary blocked by FRP Lock. I went back to the store and they advised me to install Samsung Smart Switch to try and restore. In the Smart Switch program I get an error saying that the device is not supported by Smart Switch.
I can get into download mode, not into any other mode. The tablet doesn't start up at all. On the download mode it also says FRP Lock ON.
When I go back into ODIN and retry to install the from above TWRP image, it says operation failed.
Can anybody please advice? I am at a complete loss. Am I supposed to flash the original boot file? Where can I find that for my device? Will my tablet accept that, since ODIN didn't even want to flash my current TWRP image a second time?
P.S. I only read later that you are supposed to change the OEM setting. I didn't. Is that the cause of this issue, and if so, can I do something about it?
Thanks
Hi. Have you got it fixed yet? You need to download and flash stock firmware for your model and flash it in odin. Once it's done you have to enable oem unlock before you flash twrp. Let it be enabled as long as you you have twrp, root or anything custom.
Skickat från min SM-A310F via Tapatalk
ok, I read this is the place for noobs, so, I too got myself into a FRP LOCK on my Galaxy Tab A6 sm-T280. I use the tablet strictly for flying my drone for surveillance around the rural location where I live. It was having some connectivity problems, so I rooted it to hopefully get enough horsepower to run the DJI Go app. That didn't work so I did a wipe/factory reset, had a problem with the password, and here I am.
I am researching, and gathering the required tools to fix it.
I finally found some guides that are basic enough for me to understand.
I found numerous sites to download the stock rom, but not sure which ones are safe. Suggestions? Also, I am not sure about the country code for the firmware. I am in the USA, and I don't see it listed anywhere. Does it matter? This android stuff is all new and confusing to this old man. I am determined to get this tablet fixed, and would appreciate any and all advice. Thanks, Gary
edit: Will this rom work? : T280XXUOAPL1 using XAA for theCSC? Is xaa the default/generic for U.S.A. ?
Hello fellas,
I have a SM-G930F running Super Stock Rom 2.8, rooted with Magisk 12. This morning I was a little high and worried about getting my device stolen (my S6 was stolen at gun point three months ago), so I disabled OEM Unlock and USB debug in Developer mode, in a crazy attempt to increase the security and make things more difficult for the thief. WRONG! I have really screwed things up.
Now I get CUSTOM BINARY BLOCKED BY FRP LOCK and my device won't boot. The DOWNLOAD mode shows FRP LOCK is ON, this means I won't be able to flash anything with ODIN because it will fail at writing (that is what the FRP Lock is for). I am at work and my computer has the USB ports disabled, so there's nothing I can do until I get home.
This guy did the same stupid thing, except that he wasn't high
https://forum.xda-developers.com/s7-edge/help/s7-edge-custom-binary-block-frp-lock-t3347688
I know that attempting a flash with ODIN can also cause this problem:
https://forum.xda-developers.com/showpost.php?p=71692103&postcount=25
As soon as I get home, I will attempt the Smart Switch Emergency Recovery Function and I hope everything will be OK. Since it was my google account logged in, I won't have any problems with FRP (theoretically, it will ask me to login with the last account used on the previous configuration).
[UPDATE] There is this ADB thing I am completely unfamiliar with, not to mention I have disabled USB debug on the device prior to this. This file will disable FRP Lock but I don't know the procedure.
https://www.androidfilehost.com/?fid=24591000424958372
Any help will be much appreciated. This is my only phone and now I can't use it.
Just Flash with stock frimware to make it worked than it will stuck on google lock account than try to find ways on youtube.
asadnow2k said:
Just Flash with stock frimware to make it worked than it will stuck on google lock account than try to find ways on youtube.
Click to expand...
Click to collapse
Thanks for replying. Flashing stock firmware with FRP Lock will cause a write failure, are you sure about this? I will try it as soon as I arrive home. I didn't get that part where it will get stuck on google lock account, the device is mine and the latest google account used before was my personal google account. Could you please provide more details to complete the process?
I am also considering Smart Switch Emergency Factory Restore, that is my last shot before taking it to repair shop.
Dear sir kindly be sure the software is latest/i mean firmware
Hi,
had my phone locked too. Smart switch worked, aftter flashing twrp same problem. Got a factory rom from sammonbile and flashed cp, bl and ap with odin which brought it back.
Regards,
dennis
demmis_ said:
Hi,
had my phone locked too. Smart switch worked, aftter flashing twrp same problem. Got a factory rom from sammonbile and flashed cp, bl and ap with odin which brought it back.
Regards,
dennis
Click to expand...
Click to collapse
asadnow2k said:
Dear sir kindly be sure the software is latest/i mean firmware
Click to expand...
Click to collapse
I managed to solve it using Smart Switch, the firmware update did the trick. After restoring the system asked for last used credentials on previous configuration, like it was supposed to. Since it was my personal google account, there wasn't any problem with FRP Lock. Now I have installed TWRP and Super Stock Rom 2.8 again.
Leason learned, I will NEVER deactivate OEM Unlock again with a Custom ROM.
Thanks to everyone, this thread can be closed now.
hemp_invader said:
I managed to solve it using Smart Switch, the firmware update did the trick. After restoring the system asked for last used credentials on previous configuration, like it was supposed to. Since it was my personal google account, there wasn't any problem with FRP Lock. Now I have installed TWRP and Super Stock Rom 2.8 again.
Leason learned, I will NEVER deactivate OEM Unlock again with a Custom ROM.
Thanks to everyone, this thread can be closed now.
Click to expand...
Click to collapse
hiiii can you help how to get out, i also have a private google account logged in plzzz help, i have also disabled oem mistakely
Thank You
Hi guys, i have a galaxy s7 of a customer that doesn't absolutely remember email and password for his google account connected to the phone(and so it's OEM Locked).
i tried to follow many guides on the forum but this happened:
i can't root the phone (because the FRP is locking the Flash),
nor install 6.0.1 (because of the error "sw rev check fail device 2 binary 1")
i can't use bluetooth method to skip setup guide (it was fixed in 6.0.1)
i can't use RealTerm because it can't make me save the number to proceed the guide(also fixed in 6.0.1)
what can i do? how do i bypass the FRP? or how do I downgrade to 6.0.1?
Downgrading can be a problem caused by the bootloader, make sure you try to flash a stock ROM with the same version bootloader as shown with this number
G930FXXU2ERD5
The customer would have had to enter a secondary / recovery email while making that Google account, tell them to check their other email addresses for confirmation emails around the time they set up the phone, then they can find the email address of the google account and reset the password to that email address
You have to downgrade to 6.0 and then there are plenty of ways to unlock.
Download 6.0 and latest firmware.
In Odin
1st and 3rd field from old firmware
2nd and 4th field from new firmware
If You need guide how to unlock from 6.0 let me know
LaHunnid said:
You have to downgrade to 6.0 and then there are plenty of ways to unlock.
Download 6.0 and latest firmware.
In Odin
1st and 3rd field from old firmware
2nd and 4th field from new firmware
If You need guide how to unlock from 6.0 let me know
Click to expand...
Click to collapse
1st and 3rd field in ODIN is Bootloader & Modem
If you flash new firmware to 2nd and 4th you'll end up with new firmware flashed with old bootloader and it won't boot most likely / brick
*Detection* said:
1st and 3rd field in ODIN is Bootloader & Modem
If you flash new firmware to 2nd and 4th you'll end up with new firmware flashed with old bootloader and it won't boot most likely / brick
Click to expand...
Click to collapse
I did that and it didn't brick
LaHunnid said:
I did that and it didn't brick
Click to expand...
Click to collapse
AP is the system / OS, you're telling OP to flash a new version of Android (AP) with an old bootloader, in order to downgrade to 6.0.1, your method would not downgrade anything other than bootloader & modem and old bootloader with new OS will almost certainly brick
To downgrade you need to flash old bootloader (BL) & old Android 6.0.1 (AP), and probably old modem (CP), CSC is the only thing left
And as already stated, downgrading the BL is the problem that prevents most people from downgrading in the first place
check out my tutorial https://forum.xda-developers.com/galaxy-s7/how-to/g930f-frp-unlock-helps-99-g930f-t3791424
Massive thanks
S6unbricker said:
check out my tutorial https://forum.xda-developers.com/galaxy-s7/how-to/g930f-frp-unlock-helps-99-g930f-t3791424
Click to expand...
Click to collapse
I've been absolutely stuck for days trying to sort out the bloody FRP lock on an S7 (SM-G930F) that had been gifted to my wife by my father-in-law where he hadn't removed the accounts before passing it over.
My wife then did an update that the phone requested when it started up and that went wrong at which point I get involved and factory reset it...oh BIG mistake... and that's where my problems started made worse by the fact my father-in-law couldn't remember which account he had setup on the phone....or even the password to possible accounts!! I consider myself to be well versed in all things tech but I had absolutely no idea FRP existed and was absolutely baffled when i saw the message on the screen after flashing the stock firmware (G930FXXU2DRB6) that was on there according to the recovery mode. I've been trying so many different things over the past week all current methods failed...then I came across this one...which had seemed to be blocked by admins but I was able to click on the link in the 2nd post and grab the password from the readme in the first, which i must admit made it a bit dubious and not sure why @S6unbricker felt the need to do that but there's no issues it doesn't go to a stupid survey site or anything it just goes to a text file on mega which has one line and that's the password!
I followed the method to the letter and, to my surprise and joy, it's actually worked a treat...the S7 is no longer a paper weight!!!
Massive thanks to @S6unbricker :good: ...any chance of re-posting but without the password on the file or putting the password in the post?
Frp doesn't block eng bootloader...after u flash eng boot u can simply use Abd command to remove. Or the longer method flash factory binaries. Enable oem unlock (most important part). Then flash stock rom make sure to remove userdata.img ....on a side note wondering if adding the Samsung retail app and activating it, then using the login data to remove the app via factory data reset might work.
deshaney said:
Frp doesn't block eng bootloader...after u flash eng boot u can simply use Abd command to remove. Or the longer method flash factory binaries. Enable oem unlock (most important part). Then flash stock rom make sure to remove userdata.img ....on a side note wondering if adding the Samsung retail app and activating it, then using the login data to remove the app via factory data reset might work.
Click to expand...
Click to collapse
From my experience the combination roms (which I presume you are referring to when you say eng bootloader) didn't solve my issue. Yes I could get them on the phone and boot into them, change the settings or use adb but obviously I don't want the factory binary to stay on there so as soon as I flashed it back to the current firmware, back to square one!
Most poeple advised to use HOME CSC instead of CSC when flashing from combination rom back to stock but I couldn't get odin to flash with HOME CSC.
No I'm referring to the boot.img file. Combination ROMs don't enable su access via she'll.
Samsung s7
Ok I know this is an old Post but I'm brand new to Odin and all the unlock lingo.. can anyone explain to me how to downgrade to bypass the frp on my Galaxy I just bought , I'm very tech savvy just need a walkthrough any help would be greatly appreciated
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
I had the some problem while playing with my handset I switched off OEM unlock for some reason under developer option..
Next time i reset my handset it stuck on that warning
You need to download combination file, flash it with odin, then unlock developer mode, toggle OEM unlock, than flash back your current firmware, or if you have full twrp back up restore it
JayMor81 said:
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
Click to expand...
Click to collapse
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Dammit.. I tried to put as much detail as possible in there lol.. obviously I forgot some.. My mistake the Galaxy s7 that I am using is a Rogers Mobile (Canada) SM-G930W8. As for not signing out before modification, omfg, that makes perfect sense.. didn't even think of doing that before rooting.. I appreciate the help!! I will give this a go and see what outcome I get.. Thanks!
[/COLOR]That was nice of you to respond so helpfully, despite you having seen the scenario posted over and over.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Can't make or receive calls
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Cesilina said:
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Click to expand...
Click to collapse
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
cooltt said:
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
Click to expand...
Click to collapse
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Cesilina said:
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Click to expand...
Click to collapse
Do you still have an imei number listed in settings?
Can't make or receive calls
cooltt said:
Do you still have an imei number listed in settings?
Click to expand...
Click to collapse
Yes please I still have an IMEI number