Database Info

FRP Lock ON, Secure Download Enabled, No Serial Number, Custom Boot Lock -HELP!

I have experience rom'ng Samsung phones and have never run into something this bad. My S6 Edge SM-G925P will not flash any stock/non-stock rom. Tried OI1/OH/OJ/OF, all fail Nand Write. Some suggest, split ROM in pieces and install separately in ODIN, but do not explain what that means and how to do it. When USB (official samsung cable) plugged in, phone gives Smart Switch error. I am attaching screenshots as these say it all. Please, any 'good' advice on how to attempt fixing this and getting ANY Android OS version installed? Am at wits end with this. Also, I can't get the SN because the dog ate the box and it's not on the back of the phone, plus phone won't boot other than download mode.

I was finally able to successfully install a Stock ROM and when it rebooted it showed the Samsung & Sprint logos and started charging. Currently at 40% and will try to boot the device shortly. I wanted to share that what helped was to use this specific ODIN version found at http://www.galaxys6edgeupdate.com/odin3-v3-10-6-download/ and OJ7 rom. Note the image on the website shows Odin with SM-G920/G925 where other ODINs don't show this. Confirmed! The phone rebooted and is now working. As a matter of fact, much of the data on it was maintained. Now just need to unlock it!

What files did you use.. I am on CUstom Binary and Status and get a nand fail on sboot.sh with a SW REV CHECK FAIL DEVICE 4 BINARY 3

anonymoustl said:
What files did you use.. I am on CUstom Binary and Status and get a nand fail on sboot.sh with a SW REV CHECK FAIL DEVICE 4 BINARY 3
Click to expand...
Click to collapse
I am in the same boat as well ;(

yall still need help with frp lock? if so message me

Kennii said:
yall still need help with frp lock? if so message me
Click to expand...
Click to collapse
Kennii,
I am experiencing the issues mentioned above. Can't flash with any of the stock roms using odin for my SM-G925P neither can come up with a serial number that works with smart switch.
I found a serial number for SM-G925I and the smart switch software goes to the next step. Do you have any serial number that goes with SM-G925P?

Help with FRP Lock

Hello everybody,
I usually find my answers in the specific phone related forums. But this time I'm stuck.
A friend of mine bought a Samsung Galaxy J7 (SM-J700F to be specific) in India. After using his phone there he came back home to Israel.
His phone didn't worked here for some reason and he went to a phone lab which flashed his ROM to stock Israel ROM.
They called him in the middle of the process and asked him what was his Google account thet he signed to while the first setup. Unfortunately, he cant remember his email address.
I took the phone to try bypassing the frp lock.
After a small search I realized I need an otg cable, which I bought.
I received the cable (1.5 mounths wait) and tried the otg cable method with no success.
After some experiments I successfully managed to open the settings menu. Pressed factory data reset and after a restart it stopped on recovery menu with the yellow message "dm-verity verification failed".
Well, this is annoying. I realized I need to flash the stock ROM again(Dated 01/16). So I did And the message dissapperd.
Back to the FRP lock issue. I did the process again and it didn't stopped in the recovery mode this time and I could see the Android logo with a little erasing.. Under it. Finally I thought.
I was wrong.
The FRP lock is still there! Dammit.
It is time to pull the big guns.
I thought I will flash the OLDER version of the stock ROM. Dated 09/2015 I Understand google updated the FRP lock protection on January 2016. Is the downgrade OK? I don't know if a downgrade is possible on Samsung phone.
And if you have an idea how to bypass this. Please share it.
Thank you so much!

Hello epopcop
I try so hard for three days like ure problem
The issue not from odin or pc
Th problem from samsung you cannot downgrade any update
So maybe u use software sysgem update and install it on ure device
So you cannot use any old firmware
(You shloud last updated firmware)
Link
Sorry just search in androidfilehost make a search for j700f and download the 2016 firmware
I cannot post links sorry
Use it and live ure life happy
Wishes

Need Help : SM-G920F Samsung Galaxy S6

Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
The things i tried so far:
1- Reflash with the latest stock firmware. Ticking the NAND erase all and repartition it with pit file also didn't work.
2- Samsung Smart Switch and Kies3. Flash completed but no effect.
3- Flashing any recovery files returns with "Custom binary(recovery) Blocked by R/L".
4- Sent it to my nearest Samsung service centre, they did try to repair it but only to be told that my S6 need a new motherboard the next day, which is out of my budget limit. But i am still hoping to find some other way to fix it, i believe this is just a "soft-brick" not a hard brick device.
Ideas guys? thanks.

Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,

thereassaad said:
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
Click to expand...
Click to collapse
Already tried that, still no luck..

mrkage said:
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
Ideas guys? thanks.
Click to expand...
Click to collapse
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE

Droidriven said:
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.

mrkage said:
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
Click to expand...
Click to collapse
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE

Droidriven said:
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?

mrkage said:
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
Click to expand...
Click to collapse
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE

Droidriven said:
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Only did for my specific model number and carrier

mrkage said:
Only did for my specific model number and carrier
Click to expand...
Click to collapse
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE

Droidriven said:
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.

mrkage said:
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
Click to expand...
Click to collapse
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE

Droidriven said:
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Didn't try that... but nevermind. I accidentally damaged my screen while trying to dissasemble it last night, a very stupid mistake from me.
Thank you for trying to help me mate. Forum mods can close this thread now. Thanks all.

problem
i have too but with A/L

Stuck at Powered by Android please help SM-N915G

My Fried gave this phone to me (SM-N915G) which is stuck at Powered by Android, and told me to fix it.
He said that when he update to MM from LP without KIES or Odin, the phone suddenly restarted and stuck there getting HOT
He had no experiece to repair it so he asked me to fix it.
So for 3 days lately, i have tried many ways to fix it but wihout any progress, as follow :
1. Flashing Official MM wby using Odin -> still stuck
2. Downgrading Flash Official LP using Odin -> still stuck
3. Installed TWRP, and flasing CFW Micky387_MM_V3.0 for 915F/FY/G (flashing Bootloader and modem as required) -> still stuck with set warranty bit : kernel
4. After Flashing Micky CFW and Failde, i try to flash Emotion Kernel -> still stuck with Kernel is Seandroid Enforcing
5. Redoing Flash Micky CFW with other CSC -> Still Stuck (even i tried with 915F and 915FY as in the aroma installer)
6. Never failed during flash procedure with Odin or TWRP, everything is smooth
7. When stuck, the device is getting Hot slowly but and when left as long as 15 minutes, the HH is getting HOT (TWRP read 72 degree at most)
**Update
8. Tried using Official SmartSwitch sucessfully but the result is still the same -> Still Stuck and getting hot as usual T.T
Last Download Mode status is :
Odin Mode (High Speed)
Product name: SM-N915G
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox warranty void: 0x1 (2)
Quallcomm secureboot : Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC START
I am now thinking, should i flash another Kernel or PIT or Bootloader? but i still cant decide what to do next to revive this Phone
Please help, any suggestion is greatly appreciated, thank you.

Please give some help, thank you.

Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you

wingz17 said:
Help Please anyone?
This is Hard Brick or Soft Brick?
Any suggestion or Opinion please
Thank you
Click to expand...
Click to collapse
Have you tried a reinstall using KIES?

The Radius Kid said:
Have you tried a reinstall using KIES?
Click to expand...
Click to collapse
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.

wingz17 said:
Yes i have try to recover but not using KIES, but using smartswitch...
Is it diffrent by using KIES or SmartSwitch?
Thank you.
Click to expand...
Click to collapse
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.

The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Thank you for the suggestion,
I will try that one out and let you know.

wingz17 said:
Thank you for the suggestion,
I will try that one out and let you know.
Click to expand...
Click to collapse
The Radius Kid said:
I can tell you that Kies and NOT Kies 3 was what worked for me when I downloaded/installed Marshmallow from Samsung's website.
Figure that one out.
That was also using a 64 bit version of Windows 7 Pro.
Click to expand...
Click to collapse
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.

wingz17 said:
Sorry For the long response, i have tried flasing using KIES but still stuck on the android, and no progress.
Right now i am run out of option, please help, thank you.
Click to expand...
Click to collapse
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.

The Radius Kid said:
I'm going to guess that you've tried installing MM using Kies directly from Sammobile?
If so,have you tried turning off your computer's antivirus when you download/install?
It sounds like the bootloader is looking for something and can't find it.....kind of like what happened to me when I totally ripped KNOX out of my phone.
Restore time!
Good thing I did CWM backups.
In your case,your computer's anti virus could be seeing something in the download and ripping it out.
I've seen my browsers do that when I download stuff....pain in the....
Have you tried a different battery?
Maybe a search of the forums to see if anyone else has had this problem and solved it?
I kind of remember seeing something like this a while back.
Click to expand...
Click to collapse
Thank you for the response,
I was using KIES 2.64 that downloaded from Samsung website to fix the phone as your suggestion (tools->firmware upgrade and initialisation) but still fail to fix it.
Nope, the antivirus still active when KIES download the FW and Flash it into the phone, but it is new to me that antivirus will intercept ongoing dowloaded files, if so i think the antivirus will give some notification or warning about the content of the file that being downloaded and in my case, my antivirus is still cool and no notification whatsoever.
The bad thing is i do not have any cwm backup and since this is my friend phone and not mine, well... we dont have any backup for this phone.
Regarding the battery, i admit that i havent try other battery, since i dont see any connecton between it, in my opinion, the phone works well, the charging animation working, and no sign of weak battery... but i will try to do it if i can get some other battery
I have surfed many forums and websites, but almost 90% can be fixed with simple flashing from odin or just by clearing up cache and data from recovery.
Other that that, wither, no one respond to the problem, or just some discussion without conclusion, really frustrating.
I even go further to read about android booting sequence to identify whats wrong with the boot sequence, but still confused...
But i have some question if you would to answer :
1 . Stuck at Android logo, bootloader or kernel problem?
2 . Is it possible that one of the mainboard chip that have some part in booting process is malfunctioning? But if so, the phone will be dead bricked right?
3. How about the booting process is halted due some hardware failure? ex : some chip (other than chip that have part in booting process) is bad and so the bootloader init is halted
4. The Worst guess, is it possible that the phone is fake? (the serial number behind the baterry is accepted by kies though)
Thank you very much, you are the only one who still response to my problem. :good:

As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.

Bordo_Bereli51 said:
As it seems you use the wrong Bootlaoder. Is his phone N915P or N915G? When you flash N915G Bootloader to N915P, it will not boot but the bootloader will work correctly. Try to flash the N915P bootloader.
I have N915FY phone but did not know first if I had N915F or FY. I flashed the N915F bootloader version, which flashed successfully, but was not booting. Bootloader said that my phones model is N915F. After flashing the FY Bootloader version, it successfully booted to system.
Click to expand...
Click to collapse
Thank you for the Response,
First, his phone is N915G (according to the box and the information in the battery compartment)
(Really sorry for the mistake i made at the thread title)
And regarding bootloader, that is also my concern at first, i think maybe i was flasing wrong region and bootloader, and so i search the way to find out the real version of the phone, but after trying many ways described on the net (by imei or serial number) , i still cannot found out the way.
But one instance when i try using KIES, and KIES asked for the version and serial number when device upgrade and initialisation, i entered the exact version and serial number that is found behind the phone in battery compartment. KIES immediately confirms that the version and serial number is valid, (i still wonder though, is KIES check it online at Samsung server or there are some serial number database embedded in the KIES) and continue to run trough the official fw download and installation by KIES but at the end still no success.
Is it possible that the version and serial number is wrong ? if so, how to determine the correct one?
and is it safe to try flasing another bootloader?
Thank you very much

Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.

Bordo_Bereli51 said:
Hello, there is no bootloader related to serial number or something. There are different bootloaders for different models and android version. When you flash MM-Version, you need to be sure that you use the right bootloader and baseband files for MM. If you flash different region-locked firmware/bootloader, it will not affect btw. not solve the boot-stuck problem.
http://samsung-updates.com/device/?id=SM-N915G Try to flash 6.0.1 firmware that is related to your region if you still want to try to flash different region-firmware.
Maybe download the XSA 6.0.1 Firmware with the pit file XSA http://gsm-firmware.com/index.php?a=browse&b=file-info&id=15892.
Then flash XSA 6.0.1 and TBLTE_SEA_XSA.pit together in odin. Under Odin 3 V3.12 ticke the re-partition at option-tab and select TBLTE_SEA_XSA.pit under pit-tab.
Click to expand...
Click to collapse
Thanks for the reply!
Although there is no bootloader related to serial number, but if we put the serial number in KIES, it will identify what CSC and region, which can be use as a guide to choose the correct FW or let KIES do the Flashing according to the inputted serial number, and as long as the serial number is correct one, that is my opinion but please CMIIW.
When flashing MM, if i use the MM that has been downloaded, the bootloader and baseband is included in the MM image right? or shouuld i flash it separately?
i have tried your suggestion but with no sucess, i have dowloaded the PIT and the FW, flash it trough odin which was sucess, but still stuck.
I do not tick auto restart at Odin, so i manually restart the phone, but i encounter an event which at 20% installing system update (below the greed droid guy) the progress bar is vanished and replaced with erasing, and after that the phone stuck again at the same spot.
Do you have any idea why?
Thank you very much.

Just thinking, should i erase the NAND in ODIN?
If so, how to restore it?
I think that if i backup the NAND using custom recovery and restore it later, it just bring back the same problem, if the NAND causing all this.
Do anyone have some NAND backup that i could use? or any other suggestion?
Thank you

Can you boot to recovery? if yes, try to wipe data and cache.
If it still not working, try to backup your efs with a custom recovery (ex. TWRP), or better the entire System like data, system, boot, efs, modem and save it to your computer.
After saving the backup, try to flash the firmware with pit file while checked NAND erase all.
When its finished and your device boots up, you can flash back your custom recovery and recover only the efs-partition.
If its not working, then there is maybe problems with your eMMC. But be aware using nand erase all. It is the last riskfully option left after trying several things.
I have a backup of my resurrection rom. If you want it I can upload it.

samsung galaxy s7 custom binary blocked by frp lock

Greetings, ever since i tried rooting my phone, i knew something went wrong (i used cf autoroot).
So the first thing i noticed, i was asked to reset the phone or something similar to that, meaning i would lose all my data.
I tried to find a workaround as this had never happened to me before while rooting a phone, and someone had said that i was supposed to download twrp
and change some partition and then change it back. I dont remember what else he mentioned and what exactly i tried doing, i realised it was formatted either way and i had to start fresh. As i setup my phone i went and switched the oem unlock back to "off", as i did not wanna attempt to root again, but i hadn't realised that my phone was infact rooted sucessfully, leading me to my first error after restarting. "Custom binary blocked by frp lock", with absolutely no access to recovery mode at all anymore. Again, trying to find a workaround, i download some stockfirmware that i atleast had hoped was the right one for my phone, after a couple failed attempts of flashing with odin, ( i had gotten various different error messeges on download mode screen such as (REV Check fail device 7 binary 0 and others witch i cannot remember), now im getting a new error screen, stating that an error has occured while updating the device software. I cant flash twrp recovery as the frp lock is on, and the only thing i can guess is that im flashing the wrong firmware, but i cant find a matching code at all.
Its the following: sm-g930fzkadbt
IMEI: 35214310282955
on the back of the phone it says uk yateley, although the phone was purchased in germany.
Im not sure what to do anymore, any advice would be greatly appreciated.
PS: I have managed to get back to the old error screen with the custom binary info, this time with bootloop, by checking the deviceinfo box on odin

Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.

cooltt said:
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
Click to expand...
Click to collapse
Thanks for your reply, just a question, will any btu update work? Should i download latest android version btu firmware?
(Also yes, it was stupid of me to try and do it quick but i had rooted 3 different samsung galaxy phones in the past without issues, either i did something wrong or it took something way too specific to do the job, perhaps the phone's unrootable, but thank you either way) :fingers-crossed:

Elef244 said:
Thanks for your reply, just a question, will any btu update work? Should i download latest android version btu firmware?
(Also yes, it was stupid of me to try and do it quick but i had rooted 3 different samsung galaxy phones in the past without issues, either i did something wrong or it took something way too specific to do the job, perhaps the phone's unrootable, but thank you either way) :fingers-crossed:
Click to expand...
Click to collapse
You'll likely only find the last version of BTU think it was August 2019. It isn't updated officially anymore but it'll be fine to use.

cooltt said:
You'll likely only find the last version of BTU think it was August 2019. It isn't updated officially anymore but it'll be fine to use.
Click to expand...
Click to collapse
I've found android 6 to android 8 with all the monthly updates, im just trying the latest of the latest though i dont remember my android version, ill try android 7 and 6 if that doesn't work, thanks again. I'll make sure to reply if this works or doesn't.

cooltt said:
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
Click to expand...
Click to collapse
OK so i thought it worked but i can only enter recovery mode now and download mode, but cant actually boot the system, it just boots up the battery screen whenever i plug the charger, and never shows the actual battery info, just the thunder icon. Formatting from recovery mode doesn't help either (Note whenever i launch recovery mode it says installing update, then says no command and brings me to the recovery menu) Any ideas?
PS: It fixed itself. Sorry for the pointless edit.