Hi there,
I have a Samsung Galaxy Tab A6 (SMT-580) which I bought today. I followed this tutorial to install twrp, ultimately to root the device:
dottech .org/200476/how-to-install-twrp-recovery-on-samsung-galaxy-tab-a-sm-t580/
Everything worked fine and I was able to boot and reboot fine. Until I signed in with my Google Account. After trying to reboot, I get a black screen with the Samsung logo and a text in red saying: Custom binary blocked by FRP Lock. I went back to the store and they advised me to install Samsung Smart Switch to try and restore. In the Smart Switch program I get an error saying that the device is not supported by Smart Switch.
I can get into download mode, not into any other mode. The tablet doesn't start up at all. On the download mode it also says FRP Lock ON.
When I go back into ODIN and retry to install the from above TWRP image, it says operation failed.
Can anybody please advice? I am at a complete loss. Am I supposed to flash the original boot file? Where can I find that for my device? Will my tablet accept that, since ODIN didn't even want to flash my current TWRP image a second time?
P.S. I only read later that you are supposed to change the OEM setting. I didn't. Is that the cause of this issue, and if so, can I do something about it?
Thanks
Hi. Have you got it fixed yet? You need to download and flash stock firmware for your model and flash it in odin. Once it's done you have to enable oem unlock before you flash twrp. Let it be enabled as long as you you have twrp, root or anything custom.
Skickat från min SM-A310F via Tapatalk
ok, I read this is the place for noobs, so, I too got myself into a FRP LOCK on my Galaxy Tab A6 sm-T280. I use the tablet strictly for flying my drone for surveillance around the rural location where I live. It was having some connectivity problems, so I rooted it to hopefully get enough horsepower to run the DJI Go app. That didn't work so I did a wipe/factory reset, had a problem with the password, and here I am.
I am researching, and gathering the required tools to fix it.
I finally found some guides that are basic enough for me to understand.
I found numerous sites to download the stock rom, but not sure which ones are safe. Suggestions? Also, I am not sure about the country code for the firmware. I am in the USA, and I don't see it listed anywhere. Does it matter? This android stuff is all new and confusing to this old man. I am determined to get this tablet fixed, and would appreciate any and all advice. Thanks, Gary
edit: Will this rom work? : T280XXUOAPL1 using XAA for theCSC? Is xaa the default/generic for U.S.A. ?
Related
Hello everybody,
I usually find my answers in the specific phone related forums. But this time I'm stuck.
A friend of mine bought a Samsung Galaxy J7 (SM-J700F to be specific) in India. After using his phone there he came back home to Israel.
His phone didn't worked here for some reason and he went to a phone lab which flashed his ROM to stock Israel ROM.
They called him in the middle of the process and asked him what was his Google account thet he signed to while the first setup. Unfortunately, he cant remember his email address.
I took the phone to try bypassing the frp lock.
After a small search I realized I need an otg cable, which I bought.
I received the cable (1.5 mounths wait) and tried the otg cable method with no success.
After some experiments I successfully managed to open the settings menu. Pressed factory data reset and after a restart it stopped on recovery menu with the yellow message "dm-verity verification failed".
Well, this is annoying. I realized I need to flash the stock ROM again(Dated 01/16). So I did And the message dissapperd.
Back to the FRP lock issue. I did the process again and it didn't stopped in the recovery mode this time and I could see the Android logo with a little erasing.. Under it. Finally I thought.
I was wrong.
The FRP lock is still there! Dammit.
It is time to pull the big guns.
I thought I will flash the OLDER version of the stock ROM. Dated 09/2015 I Understand google updated the FRP lock protection on January 2016. Is the downgrade OK? I don't know if a downgrade is possible on Samsung phone.
And if you have an idea how to bypass this. Please share it.
Thank you so much!
Hello epopcop
I try so hard for three days like ure problem
The issue not from odin or pc
Th problem from samsung you cannot downgrade any update
So maybe u use software sysgem update and install it on ure device
So you cannot use any old firmware
(You shloud last updated firmware)
Link
Sorry just search in androidfilehost make a search for j700f and download the 2016 firmware
I cannot post links sorry
Use it and live ure life happy
Wishes
Hi All,
The short of a long story is that I just changed carriers and found out way late that I couldn't bring my Sprint phone to MetroPCS. So now I'm using the budget PCS On5 that came with the deal when we signed up.
I successfully loaded TRWP and then rooted however, I didn't know about FRP until it smacked me in the face. The root went fine but later SU prompted me to update the binary and when it did, it tripped factory reset protection and soft bricked my phone.
I want to reinstall stock OS on this phone but it appears that I have a software version that I haven't been able to find on the web yet. I found the stock rom for the MetroPCS On5 easily enough but it's Revision 0.0 and the box I have for the phone says REV0.4.
When I try to Odin Flash the REV0.0 version, I get SW REV CHECK FAIL DEVICE 2, BINARY 1 fail. So I guess I had the latest software on my phone and the phone thinks I'm trying to roll back using the 0.0 revsion.
My question is this, does anyone here have the stock rom for G550T1 REV0.4? Help!
If nobody does, maybe I can still fix this phone. I have a TRWP backup from the sister phone (same model same revision 0.4) that I'm using right now but I can't get back into TRWP on the soft bricked phone to recover that way to use the backup file.
Next I thought I might take the backup files and turn it into a rom and just flash that. However, with the tutorials I followed I kept running into problems. When I went to unpack the files per the tutorial, my rar software said that the file was corrupt. Maybe it is. but maybe not. It was my first time attempting to make a rom. If I can't find the software I need, could any of you Android geniuses help me get this backup into a flashable format?
I have to admit I'm daunted by the FRS in 5.0 and above. Is it defeatable? How do you root newer Android versions?
Thanks!
I did the same thing to my phone. did you get yours fixed?> if so could you provide me with the rom?
I haven't found the fix yet. Hopefully somebody will come through with a helping hand!
I finally got it figured out! So here is what i did and hopefully it will work for you.
1. I Odin flashed a good BL from the ROM REV0.0 floating around on the net. So at least I could now get into download mode.
2. Then I used Kies3 > Tools > Firmware Upgrade and Initialisation. It will ask you for your model number and then when you click ok it will ask you for a SN.
3. The trick is that Samsung doesn't put the SN that you need on the phone or the box. (personally, I couldn't find it on the phone either once I got it up and running) so go here: https://forum.xda-developers.com/android/general/root-samsung-galaxy-on5-t3435457/page46 and get a SN from post #454 and use that. (don't forget to say thanks)
4. Click Ok. Let it work, and max and relax.
Mine took about 10 minutes. Hopefully this will work for you too! Thanks XDA!
Help!
What is BL from the ROM REV0.0? I need your help, I have the MetroPCS On5 and I installed Reborn ON5 I want to go back to the MetroPCS ROM because the camera and the audio do not work and I tried to install the original ROM through Odin but it does not work I get an error. What I can do? I would like to use this method but I do not have very clear files needed.
You could help me bro, I'll thank you
Greetings, ever since i tried rooting my phone, i knew something went wrong (i used cf autoroot).
So the first thing i noticed, i was asked to reset the phone or something similar to that, meaning i would lose all my data.
I tried to find a workaround as this had never happened to me before while rooting a phone, and someone had said that i was supposed to download twrp
and change some partition and then change it back. I dont remember what else he mentioned and what exactly i tried doing, i realised it was formatted either way and i had to start fresh. As i setup my phone i went and switched the oem unlock back to "off", as i did not wanna attempt to root again, but i hadn't realised that my phone was infact rooted sucessfully, leading me to my first error after restarting. "Custom binary blocked by frp lock", with absolutely no access to recovery mode at all anymore. Again, trying to find a workaround, i download some stockfirmware that i atleast had hoped was the right one for my phone, after a couple failed attempts of flashing with odin, ( i had gotten various different error messeges on download mode screen such as (REV Check fail device 7 binary 0 and others witch i cannot remember), now im getting a new error screen, stating that an error has occured while updating the device software. I cant flash twrp recovery as the frp lock is on, and the only thing i can guess is that im flashing the wrong firmware, but i cant find a matching code at all.
Its the following: sm-g930fzkadbt
IMEI: 35214310282955
on the back of the phone it says uk yateley, although the phone was purchased in germany.
Im not sure what to do anymore, any advice would be greatly appreciated.
PS: I have managed to get back to the old error screen with the custom binary info, this time with bootloop, by checking the deviceinfo box on odin
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
cooltt said:
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
Click to expand...
Click to collapse
Thanks for your reply, just a question, will any btu update work? Should i download latest android version btu firmware?
(Also yes, it was stupid of me to try and do it quick but i had rooted 3 different samsung galaxy phones in the past without issues, either i did something wrong or it took something way too specific to do the job, perhaps the phone's unrootable, but thank you either way) :fingers-crossed:
Elef244 said:
Thanks for your reply, just a question, will any btu update work? Should i download latest android version btu firmware?
(Also yes, it was stupid of me to try and do it quick but i had rooted 3 different samsung galaxy phones in the past without issues, either i did something wrong or it took something way too specific to do the job, perhaps the phone's unrootable, but thank you either way) :fingers-crossed:
Click to expand...
Click to collapse
You'll likely only find the last version of BTU think it was August 2019. It isn't updated officially anymore but it'll be fine to use.
cooltt said:
You'll likely only find the last version of BTU think it was August 2019. It isn't updated officially anymore but it'll be fine to use.
Click to expand...
Click to collapse
I've found android 6 to android 8 with all the monthly updates, im just trying the latest of the latest though i dont remember my android version, ill try android 7 and 6 if that doesn't work, thanks again. I'll make sure to reply if this works or doesn't.
cooltt said:
Yep you've now learned the hard way not to mess about and read the proper guides.
Anyway "dbt" is just unbranded german firmware. Download UK "BTU" and flash with Odin, it's UK unbranded.
FRP lock means you'll need to unlock the phone with the google account and password that was on it before you started messing about with it.
If you don't know the google email and password you need to read up on how to bypass FRP lock and it's a nightmare.
Click to expand...
Click to collapse
OK so i thought it worked but i can only enter recovery mode now and download mode, but cant actually boot the system, it just boots up the battery screen whenever i plug the charger, and never shows the actual battery info, just the thunder icon. Formatting from recovery mode doesn't help either (Note whenever i launch recovery mode it says installing update, then says no command and brings me to the recovery menu) Any ideas?
PS: It fixed itself. Sorry for the pointless edit.
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
I had the some problem while playing with my handset I switched off OEM unlock for some reason under developer option..
Next time i reset my handset it stuck on that warning
You need to download combination file, flash it with odin, then unlock developer mode, toggle OEM unlock, than flash back your current firmware, or if you have full twrp back up restore it
JayMor81 said:
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
Click to expand...
Click to collapse
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Dammit.. I tried to put as much detail as possible in there lol.. obviously I forgot some.. My mistake the Galaxy s7 that I am using is a Rogers Mobile (Canada) SM-G930W8. As for not signing out before modification, omfg, that makes perfect sense.. didn't even think of doing that before rooting.. I appreciate the help!! I will give this a go and see what outcome I get.. Thanks!
[/COLOR]That was nice of you to respond so helpfully, despite you having seen the scenario posted over and over.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Can't make or receive calls
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Cesilina said:
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Click to expand...
Click to collapse
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
cooltt said:
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
Click to expand...
Click to collapse
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Cesilina said:
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Click to expand...
Click to collapse
Do you still have an imei number listed in settings?
Can't make or receive calls
cooltt said:
Do you still have an imei number listed in settings?
Click to expand...
Click to collapse
Yes please I still have an IMEI number
[EDIT: SOLVED THE ISSUE BY TRYING THE LATEST FIRMWARE. THANKS ANYWAY!]
I got this phone from a friend, no clue what he's done to it, but I get a "Only official released binaries are allowed to be flashed"
So I downloaded the stock rom and tried flashing it through ODIN, but I keep getting errors, and it will not let me flash anything. There seems to be no bootloader too, if that's possible, as I can't enter it. I'm now stuck on a screen that tells me "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software"
I haven't rooted a phone or messed around with a phone at this level since the Oneplus One days. Extremely rusty, please help me out.
(also, the phone has G950FD on the back, but download mode claimed it's G950F. it's a dual sim phone. Is this normal?)
(apologies if I'm repeating a threads already dealt with. Can't seem to find threads related, I've forgotten my ways around this forum)