Related
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
I am going through the exact same problem on the exact same device with the exact same versions of update file and gapps zip file.
After almost trying to search any possible solution to it on google and xda, I gave up and tried to solve it myself by looking into the phone itself. There wasnt much I was able to do because of the Crash Loop saying "Unfortunately, Setup Wizard has stopped". So to rest the situation for now, I somehow went into Setting > Apps > Show System > Setup Wizard with setting logo and not the Cynogen Logo one! And Force stopped it.
Also, I cant open my home on the phone either. I press the home button and the Setup Wizard starts to crash again!
Its painful to see your beloved phone struggle to work like that! I sometimes hate CynogenMod for their nightlies and wish I could go back to the stable versions of Oxygen or CM 12!
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Tried More than 5 Different Gapps
playya said:
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
Click to expand...
Click to collapse
Initially, I thought its just an update. So there wont be any need to install Gapps back again. But then The Play store kept crashing. So I rebooted my phone after cleaning Google Play Services and Play Store.
That didn't help. Then Found somewhere written that the issue might be caused by corrupt Gapps or incompatible Gapps, So tried installing The Gapps downloaded from OpenGapps. There I downloaded all the versions of it from , Stock to nano and pico. None of them helped. The Phone is still crashing saying The Setup Wizard has stopped. Can't open Home Screen Either. Can't open Keyboard either.
Abhinav_Rakesh said:
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
abhishek.karvi said:
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
Click to expand...
Click to collapse
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Was getting the same error
Wiped the whole phone off including data reinstalled cm 13 (latest nightly i.e 28112015) and added the opengapps nano package to the flashing zip que in twrp solved the problem
Abhinav_Rakesh said:
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
abhishek.karvi said:
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
Click to expand...
Click to collapse
Found a solution!
Looks like the Gapps from Opengapps werent compatible with the 6.0 Marshmallow yet.
I spent a day looking for different gapps and tried them all on my phone.
The only gapps file which worked with CM13.120151128 update for the oneplus one was this one -->
But before installing this, In TWRP you need to Go to Wipe>Advanced Wipe And select > System, Data, Dalvik and Cache to wipe everything from your phone. Then Fresh install CM13.120151128 and Slim Zero gapps you downloaded from the above link!
All Of this, only if you want to really run your phone with Android 6.0 Marshmallow!
abhishek.karvi said:
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
Click to expand...
Click to collapse
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
Thanks for this, it did the trick for me
Now running CM13.0-20151201 NIGHTLY Bacon.
The error "Setup Wizard Stopped" of in het nederlands "Installatiewizard gestopt" has not shown up again after changing permissions for "Setup Wizard" (one without cm logo)
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
MrSeler said:
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
Click to expand...
Click to collapse
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
maxpayne1989 said:
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
Click to expand...
Click to collapse
yeah i m going to try this a few times more and write what were the results. all i have to do is simply copy the gapps into my phone, the pc sees it but im not able to access it in any way and cant figure out how.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
pankspoo said:
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
Click to expand...
Click to collapse
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
You're a life saver. Thanks for the tip! It works for me.
Yes I have the same setup and the same problem.
Interesting appraoch ... . My problem: I do not have "Setup Wizard" in the Apps List within settings ... and my phone stay unuseable
-------------------------
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I tried this approach to get rid of the "Setup Wizard has stopped" pop-up error, but got an error message when I tried to execute the command ...
>adb shell pm disable com.google.android.setupwizard
CANNOT LINK EXECUTABLE: cannot locate symbol "android_set_rt_ioprio" referenced by "/system/lib/libinputflinger.so".
page record for 0xb6f0f04c was not found (block_size=32)
tungdil said:
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
Click to expand...
Click to collapse
UPDATE 18/08/2017
• Google Play Protect
• Google Connectivity Services (Update)
• Interface Optimization
• English Support (Input Language)
• WiFi (Fix Bug)
• Download ➤ https://goo.gl/CDxV8J
Let me try this, your previous ROM is not supported with Magisk 13. any information why?
I hope this one is Magisk 13 supported
--edit
Magisk 13 still not work,
Pre-routed or without root and gapps
goonoth said:
Let me try this, your previous ROM is not supported with Magisk 13. any information why?
I hope this one is Magisk 13 supported
--edit
Magisk 13 still not work,
Click to expand...
Click to collapse
In this new update there are two options of rom the first one already comes pre-routed and the second option and rom without root and without gapps
will try it
i will report it later.
wifi hot spot isnt working
robsonwaplog said:
In this new update there are two options of rom the first one already comes pre-routed and the second option and rom without root and without gapps
Click to expand...
Click to collapse
Yes, I know
But root with magisk is more reliable as I can hide root for banking apps and Po Go
Those apps will detected my phone is rooted
With root and gapps or without root and gapps!
goonoth said:
Yes, I know
But root with magisk is more reliable as I can hide root for banking apps and Po Go
Those apps will detected my phone is rooted
Click to expand...
Click to collapse
So just choose the best option for you between the two with root and gapps or without root and gapps ... ok!
Di I have to format data and system to install this version? Currently I am on your previous build.
any bugs?
Adhies99 said:
any bugs?
Click to expand...
Click to collapse
Didn't find any bugs, only sometimes I get crashes from calendar and Google app, rarely though.
Pretty stable and really fast.
[ROM] Do not need not clean anything
ionlyaskforeden said:
Di I have to format data and system to install this version? Currently I am on your previous build.
Click to expand...
Click to collapse
Not need not and just for those people who are with other rom more so you do not need to clean anything just plain fash
[ROM] I did not find any errors
Adhies99 said:
any bugs?
Click to expand...
Click to collapse
I did not find any errors, but it would be cool if you test and tell me if you find any errors to fix it
[ROM] Used the gapps and supersu optimized that i left it is much better
ionlyaskforeden said:
Didn't find any bugs, only sometimes I get crashes from calendar and Google app, rarely though.
Pretty stable and really fast.
Click to expand...
Click to collapse
Thank you comment i'll check to fix ... but you use the optimized gapps that i let
robsonwaplog said:
Thank you comment i'll check to fix ... but you use the optimized gapps that i let
Click to expand...
Click to collapse
Yes, the in version the gapps are included, but i still flashed the zip from the folder you provided.
Howerver after reinstalling the corrupted Google Apps form withing android everything works flawlessly for the most part.
If you have anything for me to try out dont hesitatem would be glad to help.
~Eden
I found two bugs
I found two bugs on this rom, the first bug is go to settings-display- saturation and color-screen optimize, when I set it to Normal mode, it works. But when I restart my phone, this setting restored to Smart adaption(although it seems circled the Normal mode, it actually Smart adaption, the same result on Screen enhance) So currently I have to check this setting every time I restart my phone.
The second bug is this rom is incompatible with ShadowsocksR( a software which can bypass the censorship in China), it keeps FC when every time when I open SSR( stand for ShadowsocksR) I have tested this software on MIUI, it works great.
Could you fix these two bugs, I would be grateful.
And here is the link of SSR, if you would like to test it.
[email protected]/shadowsocksr-backup/shadowsocksr-android/releases/download/3.4.0.6/ssr_3.4.0.6.apk
Replace @ with . instead
Can this rom support OMS for substratum?
[ROM] incompatible
maple3142 said:
Can this rom support OMS for substratum?
Click to expand...
Click to collapse
Sorry, but I can not do this ... incompatible
I am having some 4g problems with this rom. Tried to force switch to 4g no luck.
Also the camera looks a bit off, a bit of white noise and unsharp.
The rom started in chinese without the option to select a language.
Further it seems to behave fast and quick.
What about the camera quality? Is it good as stock? Or the same problem as the rest of AOSP ROMS?
Thanks fot keeping updating.
Update 02/08/2017
semm said:
I am having some 4g problems with this rom. Tried to force switch to 4g no luck.
Also the camera looks a bit off, a bit of white noise and unsharp.
The rom started in chinese without the option to select a language.
Further it seems to behave fast and quick.
Click to expand...
Click to collapse
TEST THE NEW VERSION 02/08/2017 https://goo.gl/AYzgGW
I put together a small TWRP Installer/Magisk module for our OP3 devices
Whats included:
Google Dialer with working Location and Caller ID and Visual Voicemail
Google Contacts
Google Messages
Google Calculator
Carrier Services
Google DeskClock
Dialer Framework
This module removes:
Stock Messages
Stock Dialer
Stock Calculator
Stock Deskclock
Fetures coming soon:
Pixel 2 Launcher (having issues getting it to not force close after install)
Pixel 2 Live Wallpaper
Wallpaper
Pixel 2 Boot Animation
Pixel 2 Sounds
Pixel 2 Accent color
Google Pixel/Nexus Experiance Magisk Module
Google Pixel/Nexus Experiance TWRP Installer(Coming Soon)
I have not tested it on a OP3T since i dont have a 3T but it should work as well
Ive only tested this on OP3 Open Beta 29 but i dont see why it wont work on other versions
If anyone wants to test on 3T and report back that would be much appriciated
Credits:
Wr3ckd90
dustintinsley (for the idea and the base from his OP5 module)
if it didn't touch anything from kernel etc. then should its work on op3T too
also Its only for Hydrogen OS/Oxygen OS?
anyone tried it on other roms (AOSPA oreo/Nitrogen OS)?
is the module for LOS - Based roms or for AOSP and what android version ????
RKBD said:
if it didn't touch anything from kernel etc. then should its work on op3T too
also Its only for Hydrogen OS/Oxygen OS?
anyone tried it on other roms (AOSPA oreo/Nitrogen OS)?
Click to expand...
Click to collapse
I've only tested it on Oxygen OS.. I'll load a version of Hydrogen OS today and try..
ele95 said:
is the module for LOS - Based roms or for AOSP and what android version ????
Click to expand...
Click to collapse
I haven't tried it on LOS yet but you can get all the same fetures this offers if you use the aroma opengapps you can put everything this offers right now
When I try and install via magisk it fails, when I install via TWRP it installs fine - think you have the above the wrong way round
The phone pops up an error each time I open it, says the phone is not compatible and may not work - quite annoying to see it each time. Anyone else have this issue?
When can you give support for twrp?i have super su not magisk
instarobuk said:
When I try and install via magisk it fails, when I install via TWRP it installs fine - think you have the above the wrong way round
The phone pops up an error each time I open it, says the phone is not compatible and may not work - quite annoying to see it each time. Anyone else have this issue?
Click to expand...
Click to collapse
That's weird because it installed perfect in magisk for me I'll run it through a few more test on different versions of Hydrogen/Oxygen
ZeroVirus said:
When can you give support for twrp?i have super su not magisk
Click to expand...
Click to collapse
I'm working on that now I'm running into the problem of it saying not supported if you install via magisk it shouldn't show that message though the magisk installer should install just fine through twrp but you will have a not supported message when opening phone
Wr3ckd90 said:
That's weird because it installed perfect in magisk for me I'll run it through a few more test on different versions of Hydrogen/Oxygen
I'm working on that now I'm running into the problem of it saying not supported if you install via magisk it shouldn't show that message though the magisk installer should install just fine through twrp but you will have a not supported message when opening phone
Click to expand...
Click to collapse
Thanks, look forward to trying again very soon ?
please add support for LOS - Pixel accent clolor , navigationBar animation and round icons , this thread can help you https://forum.xda-developers.com/nexus-6/themes-apps/cool-pixel-mod-android-7-1-1-t3532951
Id love a TWRP flashable zip too (better than Magisk imo)
I'm working on a TWRP flashable I'm just running into the issue with the method I used to remove the pop-up in dialer isn't working in TWRP only Magisk I'll release the TWRP once I figure that out
I tried it on RR and I can't make and receive calls. Almost at all. How can I uninstall it? Is there another way apart from flashing my rom again ?
femiro said:
I tried it on RR and I can't make and receive calls. Almost at all. How can I uninstall it? Is there another way apart from flashing my rom again ?
Click to expand...
Click to collapse
If you installed it via Magisk just uninstall by removing it in the Magisk installer.. I'll create uninstallers for both Oos and AOSP today to restore the removed apps.
Wr3ckd90 said:
If you installed it via Magisk just uninstall by removing it in the Magisk installer.. I'll create uninstallers for both Oos and AOSP today to restore the removed apps.
Click to expand...
Click to collapse
I flashed the zip to install it and then I removed the module from Magisk. Still phone app crashes though.
Edit: I gave manually the permissions to phone app and it seems to work now.
Hi ! I use it on ExperienceOs based on OxygenOs 5.0.1 and work fine but this custom use busybox and don't know if are on permissive SeLinux ? But they had an App to choose it.
After clean Flash and use FreedomOs 3.2.1 based on OxygenOS 5.0 I had always the message in Google Dialer "The Dialer may malfunction on your version..." I had test it again after use Magisk mod "Google Framework" but always the mistake with Google Dialer ??? I don't know why ? Rrrr. I had just remove it in Magisk and use Oneplus App but I don't understand work fine with ExperienceOs and not with FreedomOS perhaps just OxygenOs ? work on 5.0.1 and not on 5.0 ? I stay the update of FreedomOs for see.
Another I had test in my computer to remove Google clock after extract it and compress in zip but won't work with magisk ? It's not a magisk mod.
How can remove exemple Google clock because Oneplus Ckock is better with the calendar option for alarm
But thank you a lot for your work it's the only one work on OOS Oréo
Hi, if I flash it via magisk and I remove it after it will restore stock deleted applications ?
Bryandu13 said:
Hi, if I flash it via magisk and I remove it after it will restore stock deleted applications ?
Click to expand...
Click to collapse
If you remove it after you just loose Clock And Calculator App ! But you can install it with Apk mirror for have Oneplus Clock and Calculator.
For Dialer just choose Oneplus Dialer again and work fine for me same for Oneplus Contact don't uninstall it.
I do to reinstall Google messager too because I use it and when I remove the mod Google messenger are delete too.
The mod had work fine with the custom rom ExperienceOS R32 Stable OOS 5.0.1 no message when use Google dialer all work fine and can apply substratum theme
But I had change and return to FreedomOS 3.2.1 OOS 5.0 and always message in Google Dialer
I stay a TWRP zip or update
So quick update... I'm still working on this I've hit a few more roadblocks I want to fix before releasing anything else
Mms on messages sends but can't use the mms part of messages weird also I'm still having issues with twrp with the dialer message trying to fix that still I hope I'll have something to release this weekend but not 100% sure..
Wr3ckd90 said:
So quick update... I'm still working on this I've hit a few more roadblocks I want to fix before releasing anything else
Mms on messages sends but can't use the mms part of messages weird also I'm still having issues with twrp with the dialer message trying to fix that still I hope I'll have something to release this weekend but not 100% sure..
Click to expand...
Click to collapse
Thanks for the info/update, and for bringing this to us. I love this mod, and prefer using Google's Dialer and Messages over OnePlus.
When you say "Mms on messages sends but can't use the mms part of messages", what do you mean? I thought I was able to send/receive MMS through Google Messages just fine. Are you talking about group messages, pics, etc...
I'm not currently on an OOS ROM, but will probably be moving back soon (today, probably) and can try to verify that for you if you want.
Thanks again!
Hi ! Thanks for your mod. I had rollback to ExperienceOs R32 and flash with Magisk your mod and work fine.
But I had a question if I want Oneplus clock and uninstall google clock how I do ? Please.
I had install the apk of Oneplus clock but isn't System App and google clock are System App and can't uninstall it.
Thanks
Good morning to all,
I think I posted this thread in the wrong place and I'm sorry for this, so I post it here now.
I flashed my SM-P905 with Lineage 15.1 using TWRP 2.8.7.0.
I have installed the correct OS (viennaltexx) and the correct gapps (arm 8.1 super) but I was having an issue with Google Play Services that was continuously stopping and this didn't allow me to set the google account and to get access to all the play services, so I decided to retry to flash the OS and gapps, I wiped everything but the sd card, but now when I try to flash the OS it stops on "no md5 file found" (no error 7) and it goes back to the TWRP home.
Now I've installed the 14.1 Lineage OS (again wiping everything but the sd card) and it is very stable and fast and gives only 1 problem:
- the fact that I can't install the SuperSU and it causes the CM S Pen app fail to work, because lacking of root access. When I flash the file (file name "addonsu-14.1-arm-signed") everything goes well, but when I reboot the system the SuperSU app is missing. I activated the access for APP and ADB in the developer options but it still doesn't work;
This system would be completely satisfying with S Pen functions.
But I would try to install Oreo just beacause I would like to try the porting created by Alexis, with the Note 9 apps.
Can someone please help me? Thank you very much!
EnricoLeoni said:
Good morning to all,
I think I posted this thread in the wrong place and I'm sorry for this, so I post it here now.
I flashed my SM-P905 with Lineage 15.1 using TWRP 2.8.7.0.
I have installed the correct OS (viennaltexx) and the correct gapps (arm 8.1 super) but I was having an issue with Google Play Services that was continuously stopping and this didn't allow me to set the google account and to get access to all the play services, so I decided to retry to flash the OS and gapps, I wiped everything but the sd card, but now when I try to flash the OS it stops on "no md5 file found" (no error 7) and it goes back to the TWRP home.
Now I've installed the 14.1 Lineage OS (again wiping everything but the sd card) and it is very stable and fast and gives only 1 problem:
- the fact that I can't install the SuperSU and it causes the CM S Pen app fail to work, because lacking of root access. When I flash the file (file name "addonsu-14.1-arm-signed") everything goes well, but when I reboot the system the SuperSU app is missing. I activated the access for APP and ADB in the developer options but it still doesn't work;
This system would be completely satisfying with S Pen functions.
But I would try to install Oreo just beacause I would like to try the porting created by Alexis, with the Note 9 apps.
Can someone please help me? Thank you very much!
Click to expand...
Click to collapse
Try upgrading your TWRP to a newer version (3.1.1 seems to be popular version) and flash everything again. 2.8.7 is a very old version for TWRP, and might not handle the 15.1 stuff well.
rhricik447 said:
Try upgrading your TWRP to a newer version (3.1.1 seems to be popular version) and flash everything again. 2.8.7 is a very old version for TWRP, and might not handle the 15.1 stuff well.
Click to expand...
Click to collapse
Hi rhricik, thank you very much for your response.
I tryed to find the .tar file to install it with Odin, but I failed, I only find the IMG files. Do you know how to install the newer version using the IMG file and the TWRP app in Android (if it is possible ti do) or do you have a link to a .tar file?
I tryed to flash the image with the recovery, but when I go to the download folder i tap on "images" but I can't see the file. I can see it in the archive, but not in recovery mode.
Thank you again!
rhricik447 said:
Try upgrading your TWRP to a newer version (3.1.1 seems to be popular version) and flash everything again. 2.8.7 is a very old version for TWRP, and might not handle the 15.1 stuff well.
Click to expand...
Click to collapse
I found only the TWRP 3.0.2 as the latest version for Galaxy Note Pro 12.2. I converted the img file to .tar and it worked, but when I go to instal the OS it still stops on md5 file not found.
Is it safe to use a TWRP 3.2.2 for another device?
Otherwise I could try to flaash the system using Odin. Is it possible?
Please try this Link: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
"2. 20180708: 3.2.2-0 version"
Regards
bemanet said:
Please try this Link: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
"2. 20180708: 3.2.2-0 version"
Regards
Click to expand...
Click to collapse
Hi bemanet, thank you very much! The 3.2.2 version of TWRP is successfully installed.
At least now I know what the problem is.
When I flash the system I obtain this response now:
" Skipping Digest Check: no Digest file found
Zip file is corrupt!
Error installing zip file '/external_sd/oreo/lineage-15.1-20180708-UNOFFICIAL-viennalte.zip'
Updating partition details...
... done "
So maybe there must be some problem with the file structure.
Anyway thank you very much for your help.
Regards
You may need to re-download the file. It may be corrupt....
bemanet said:
You may need to re-download the file. It may be corrupt....
Click to expand...
Click to collapse
Yes i tried but the file results unavailable, maybe for fixing. I'll try again later!
Thank you very much!
Meanwhile, do you know why I find impossible on Lineage 14.1 to install a different keyboard? I tried to install the Samsung keyboard and another different keyboard with CTRL and arrows keys (both installations went good) but both times when I went to select the keyboard It gave me only the gboard.
Plus, when I try to open the gboard settings the app crashes, so I would like to change it.
Thank you again!
EnricoLeoni said:
Yes i tried but the file results unavailable, maybe for fixing. I'll try again later!
Thank you very much!
Meanwhile, do you know why I find impossible on Lineage 14.1 to install a different keyboard? I tried to install the Samsung keyboard and another different keyboard with CTRL and arrows keys (both installations went good) but both times when I went to select the keyboard It gave me only the gboard.
Plus, when I try to open the gboard settings the app crashes, so I would like to change it.
Thank you again!
Click to expand...
Click to collapse
Try Hacker's Keyboard from the Play Store - has all the control and arrow keys. That's been my main keyboard across 5 devices. Works well.
---------- Post added at 21:40 ---------- Previous post was at 21:37 ----------
Follow the directions that Hacker's Keyboard gives to get it set up as your default keyboard
rhricik447 said:
Try Hacker's Keyboard from the Play Store - has all the control and arrow keys. That's been my main keyboard across 5 devices. Works well.
---------- Post added at 21:40 ---------- Previous post was at 21:37 ----------
Follow the directions that Hacker's Keyboard gives to get it set up as your default keyboard
Click to expand...
Click to collapse
Wow thank you very much rhricik, it is perfect!
Hello Guys,
I come in need of a help,
I'm writing from my computer now,
Yesterday my phone was working fine,
Today morning, I updated the apps on my phone; amongst the updates was android system webview.
After a reboot, my phone is unresponsive, it won't open any of the apps from that point.
I reboot again, since keyboard doesn't work, I used the OTG cable to use the physical keyboard to enter the password and get in. Tried entering setting to uninstall that crap app, settings is unresponsive.
No SIM services, no keyboard, no fingerprint, no settings etc.. basically nothing works and everything says "unresponsive and asks to either wait or close".
The only thing I have now is TWRP Recovery, and I'm inside it now.
I've wiped Cache + Dalvik / ART Cache : Result still same, nothing works.
I mailed [email protected] (which is provided in the app's "Developer" section) about this and got a reply that the mail is no longer being monitored.
Can someone please let me know how I can remove android system webview by using TWRP ? So that I can enter the phone back again as normal..
Device Details:
Lenovo K8 Note
Android 7.1.1 Nougat, (Never updated the OS)
Device has been rooted and has recovery options.
I think you can find WebView module in Magisk respiratory so I suggest you give that a try. Flash it and I think it will be fine as long as you have Magisk installed, of course.
dedq said:
I think you can find WebView module in Magisk respiratory so I suggest you give that a try. Flash it and I think it will be fine as long as you have Magisk installed, of course.
Click to expand...
Click to collapse
Thanks, I couldn't quite understand that..
I've never read/seen a need for Magisk so far.. so may I know what is the procedure to be done here...?
I do read Magisk is a systemless Root, (I already have SuperSu, is that the same functionality? (though I can't open anything that is))
Find the Magisk zip on Google and flash it over TWRP.
Head over to the Magisk module site and you will be able to find an alternate WebView module you can flash. It will be in zip format so I guess you will need USB to transfer those files to your phone since you cannot use it to download modules.
dedq said:
Find the Magisk zip on Google and flash it over TWRP.
Head over to the Magisk module site and you will be able to find an alternate WebView module you can flash. It will be in zip format so I guess you will need USB to transfer those files to your phone since you cannot use it to download modules.
Click to expand...
Click to collapse
Understood, thanks..
Will try this out.
KillerBeeSama said:
Understood, thanks..
Will try this out.
Click to expand...
Click to collapse
Give it a try and come to tell if you have sorted it out.
If not, you will probably need to flash your ROM again hoping the application won't stay updated but to back to stock version.
dedq said:
Find the Magisk zip on Google and flash it over TWRP.
Head over to the Magisk module site and you will be able to find an alternate WebView module you can flash. It will be in zip format so I guess you will need USB to transfer those files to your phone since you cannot use it to download modules.
Click to expand...
Click to collapse
Oh, one more thing,
Does this procedure mean, I'll lose TWRP and SuperSu?
Can I not just downgrade the android system webview manually itself?
KillerBeeSama said:
Oh, one more thing,
Does this procedure mean, I'll lose TWRP and SuperSu?
Can I not just downgrade the android system webview manually itself?
Click to expand...
Click to collapse
You won't lose TWRP but I am not sure about SuperSu since it's very old and people don't use it from the time Magisk appeared. I don't think you will be able to have both TWRP and SuperSu.
It would be good for you to just uninstall the updates of WebView if you can use your phone at all. That would solve the problem.
TWRP basically is a menu what allows you to select and apply ADB and/or Fastboot commands.
SuperSU is a Superuser access management tool: it requires SU binary got installed on Android.
Both mentioned sofwares are completely different things, don't depend on each other.
BTW:
I always root Android without the need to make use of Magisk or SuperSU.
So, I went through these
[MAGISK] [MODULE] Webview Manager
Welcome to the XDA home of Webview Manager by Androidacy Read about it on our blog: https://www.androidacy.com/tag/webview-manager/ What is this? This magisk module allows to install several webviews and browsers, replacing the stock one with...
forum.xda-developers.com
Android system Webview installed but not used by apps
I downloaded and installed the latest version of android system WebView from the app store on my android tablet (running 5.0.2). But apps still go on using the old webview version (39.0.0.0). Ho...
android.stackexchange.com
SystemWebView releases
SystemWebView releases
www.bromite.org
Installing SystemWebView
Bromite is a Chromium fork with ad blocking and privacy enhancements; take back your browser! - bromite/bromite
github.com
I got is, .. the adb and appt command says "not found". so.. confusion. and I also see that Bromite System Webview might or might not work on some apps..
So,
Is there a way to downgrade an app through recovery mode
or delete that app's data and start from scratch for that alone?
or is there a way to flash an old Android System Web View through TWRP?
Please help, I have spent the whole day trying to fix this.
I already have SuperSu and it seems if I need to goto Magisk (which is just for that other webview application, I have to do a lot of rolling back and applications going away, ) I don't want that..
Let's keep the Magisk idea as last resort and please let me know if there is any other way to delete the entire Android Webview related stuff and start from beginning.
<bump>
Attached the attack of errors. (these are just few of the ANR popups, there are lots more.. at the last screen you can see even settings won't respond)
My recommendation: Reflash phone's Stock ROM to get rid off of all modifications you applied so far, then restart modding from the scratch.
jwoegerbauer said:
My recommendation: Reflash phone's Stock ROM to get rid off of all modifications you applied so far, then restart modding from the scratch.
Click to expand...
Click to collapse
Just because of one application?
I just want that android webview gone/replaced with a stable one, is that not possible without destroying everything?
Thanks everyone.
we have a solution,
In my case, uninstalling the Xposed framework fixed it for me..
So, while working on this issue I had made a flow map and a log of what is done and its results, may be someone else can benefit from it in the future..
Spoiler: Tries and results
Even starting the entering phone itself is a big issue, because the keyboard applications don't come up; fingerprint doesn't work on first boot as a security measure as well; connected physical keyboard to OTG to phone to enter password... then greeted with lots of errors of all the applications.
Asking people blowed over 'to buy a new phone'
Posted to Reddit, no replies
Posted to Google support, got crappy bot_ish answers; who even hires these people!
Posted to XDA, have some ideas worth trying
Unpacking the system web view.apk on computer gives crap details as it is almost completely encrypted.
Going rabbit hunting through the rabbit hole, checking each folders on "/"
found something similar /system/app/WebViewGoogle/WebViewGoogle.apk
Quick google search confirms that I’m on the right path to finding it...
May be data or XML is somewhere too?
Deleted(copied and deleted) /system/app/WebViewGoogle/WebViewGoogle.apk
Result, Same
Then Reverted
PS: Original Copy at ext_sdcard
Replaced the existing one (92.0.4515.115 with 90.0.4430.210)
Result, no changes.
Then reverted with the crappy original
May be adb will install properly?
Tried adb commands on phone on TWRP, doesn't work
Tried adb from computer to phone, unable to connect to phone.
Was doing it wrong, while in TWRP, I need to initiate "ADB Sideload" and then connect from PC (with Firewall allowed)
then "adb devices", shows connected device with serial number
after the above, the adb push keeps saying "error: connect failed: closed"
turning phone ON and connecting for additional settings (USB debugging) pops "mtp host failed" as soon as I wire..
Started the phone, switched over to Guest account, (oddly seems stuff there are kind of better with lesser error messages), tried launching playstore and wifi, both need password which I don't have, entering settings, hangs for a while, quickly go to apps and uninstall updates for android system web view.. web view becomes 0.0.1
results, fail
Created a temporary user account on phone whilst booting, (because of the observable lesser apps running if I switch over from main..)
added my gaccount on it,
launched playstore to update the android system web view..
the update is stuck at 60%~70 %each time and is unable to complete..
took the v90 application that is on pendrive, connected otg.. and started to install application manually from there..
it said, no space.. even though there is around 4 GB free... continued to disable other applications, such as chrome, youtube, drive etc..
still unable to install the v90 application
even installing other apps (sudoku example) have the same issue,
and then I see a popup that package manager has stopped working (aha! so that itself doesn't work, then can't install),
Went to see if I can change something on developer options, developer option wont come up even after 7+ taps.. hmm strange, may be only main account can have dev options.
While at it, swapped out the Gboard with older AOSP keyboard (retaining Fleksy though).
Rebooted and tried again.. no fix yet..
Atleast I don't have to switch to physical keyboard now for every reboot, since the inner older keyboard comes for first boot.
By TWRP, removed existing app and replaced with v87; doesn't seem to be any different, same errors...
Was about to install the Magisk but it seems to have lots and lots of catches to it, and things to-do before I can go to that...
Continuing investigation on how to downgrade and get back to older state
Through TWRP, deleted the app folder from /system/app/WebViewGoogle/WebViewGoogle.apk
researched to see if there is something else to delete, couldn't find much... proceeding from what we know...
Removed ATSystem.apk (3C's helper) from /system/priv-app just in cast (copy placed at ext_sdcard)
result no change..
Started at around 31-Jul-21 13:00 and went on till 01-Aug-21 01-26 pausing to for the day to rest...
Restored App Folder back to /system/app/WebViewGoogle/WebViewGoogle.apk
WebViewGoogle.apk is v90 again.. (the original seems to be missing, meh, not like it's going to fix)
reboot, result, no changes.
Starting step to install magisk
Removing xposed now..
wiped dalvik cache
rebooting
Kind of stable!!!
Everything seems to work?!?!
Firewalled all app except playstore and mail,
mail seems to work, but can't open the mails (just the headers are received), clicking on the mail says "unable to inflate webview"
aha, I forgot that I have v87 still, if I update that again, will it work (if it doesn't we know how to revert now)
proceeds to update v87 to latest
reboots,
I guess issue resolved by uninstalling xposed, next step to enter phone and move data to safe zone and think about next step.
Are you using xprivacylua?
VD171 said:
Are you using xprivacylua?
Click to expand...
Click to collapse
No, I do remember hearing about it.
GUys, i have installes a system webview on my Samsung J2 core, after restarting my phone stuck on int boot animation, then i do the hard reset combination keys and keeps from restarting. what should i do.
TUPANGPUTi23 said:
GUys, i have installes a system webview on my Samsung J2 core, after restarting my phone stuck on int boot animation, then i do the hard reset combination keys and keeps from restarting. what should i do.
Click to expand...
Click to collapse
Oh... sorry to hear that.
I don't know the solution to that, because mine is rooted I was able to get into the custom recovery and fix things.. not sure what can be done here for your case, (I do know that the old samsung's default recovery is kinda unreadable for English speakers)
So, I think it's best for you to start a new thread in the forum, because if you make a new thread there's a higher chance of reply than this thread which is already marked solved.
(plus. please do attach any photos even crude it may be, still will help people see and suggest actions)