This may be a dumb question but how do you start Android Auto? I don't have a shortcut for it but the app is factory installed I guess. It doesn't start automatically when I plug it into my car.
Install apps from play store.
Pich018 said:
Install apps from play store.
Click to expand...
Click to collapse
As I said in my original message, the app is installed.
steelersmb said:
As I said in my original message, the app is installed.
Click to expand...
Click to collapse
1. App is installed
2. Connected in car via USB cable?
If yes to #2 what happens if you manually open AA does it connect or still does not see the phone?
steelersmb said:
As I said in my original message, the app is installed.
Click to expand...
Click to collapse
You quote "I guess" ....
Android auto isn't maps.
On my phone one plus 7pro Android auto work perfectly.
Clear apps data maybe.
Do you have USB debugging enabled? If so, try to disable it and see if the phone is recognized after.
Also, try a different USB plug in the car and a different cable.
...and at the risk of stating the obvious, are you sure that full-link is enabled and supported in your car?
Android Auto is installed because when I go to the app store it's installed and if I try to uninstall it, it only uninstalls the updates so this tells me that it comes pre installed. I am on the new McLaren edition of the phone. However, there is no Android Auto shortcut so I can't run the app. It's odd.
I actually got it to work, it was the USB cable I was using. However, it's weird that there is no shortcut to start the app manually.
steelersmb said:
I actually got it to work, it was the USB cable I was using. However, it's weird that there is no shortcut to start the app manually.
Click to expand...
Click to collapse
There used too be, but now it's integrated as a System app, and seeing as Google is released a stand alone "Android Auto" type app for users who use it on there phone display is why they did that.
Related
I'm trying to download apps from Google Play without success. So, as an example, I try to download Skype. When I get the web page and Google Play, it has a pull down for what device to install it on. If I click on that arrow, it says "Samsung GT-N8013" (the new Galaxy Note 10.1, but it is greyed out so I can't select it. This means that the INSTALL button continues to stay greyed out and I can't install it. The same thing happens with all the apps I've tried so far. Anyone know why this could be happening? Thanks!
you're installing from the pc right? if yes, then i have the same problem, but after i download many apps, just close your browser and try again.
d3vi13 said:
you're installing from the pc right? if yes, then i have the same problem, but after i download many apps, just close your browser and try again.
Click to expand...
Click to collapse
Actually no. I'm trying to install directly onto my tablet. Interestingly enough, it started working about 15 minutes ago. Google Play started recognizing my device and I was able to successfully install a bunch of apps. Very strange...
your tablet was acting like pc, so you have the same thing as i had, because on phone google play recognize device without you need to select the right phone, but i don't like my phone to be recognized, because then i can't install apps that i know are working, because they're "not" for my phone.
Have you tried clearing the cache and data for play?
sent from the thing I stab with my finger when I get two minutes
Does it say that the apps are incompatible with your device?
It did, but it mysteriously started working. I didnt do a darn thing to fix it!
Sent from my GT-N8013 using xda app-developers app
wyckedjester said:
I'm trying to download apps from Google Play without success. So, as an example, I try to download Skype. When I get the web page and Google Play, it has a pull down for what device to install it on. If I click on that arrow, it says "Samsung GT-N8013" (the new Galaxy Note 10.1, but it is greyed out so I can't select it. This means that the INSTALL button continues to stay greyed out and I can't install it. The same thing happens with all the apps I've tried so far. Anyone know why this could be happening? Thanks!
Click to expand...
Click to collapse
you should try to use google chrome add-on to download apps from market to PC then copy to sdcard, enable option (Setting/Sercurity/ Unknown sources) that allows us install non-market apps
type: APK DOWNLOADER on google search
Hi,
My girlfriend has the moto g and since this morning it's unusable: every second comes a crash message that a app fc. All apps belonging to Google (YouTube, calendar...) are crashing and especially the launcher. It's just possible to go to settings via quick toggles. But I can't delete any data etc from apps. And it won't accept any changes to any settings. I can't open any app because the launcher doesn't work...
The problem: it's an unrooted, totally stock phone with just a few apps (whatsapp, chronus...) . Now I wanted to ask if anyone can help and maybe knows this problem and how to fix it. And: I can't connect it to the PC (win7). Anyone has a link and a description to install the USB drivers? I tried all the "normal" ways with Motorola device manager and manually install USB drivers. I want to backup the messages and pictures before I try a factory reset. I rebooted it in secure mode, but all the problems still exist...
I hope anyone can help... Thanks in advance!
I want the moderator to ban me.
alikpronoy said:
If it always crashes how would you be able to back up SMS and picture? Try to go to the store you bought your phone or call your tech support. But if nothing happens you just need to factory reset your phone.
Click to expand...
Click to collapse
If it connects to the pc, you can easily make a backup of these things. The Problem is that it doesn't connect because i have problems finding the correct usb driver.
alikpronoy said:
As much as we want to, but I think, there's no way to back it up. You just need to factory reset it.
Click to expand...
Click to collapse
Already tried a factory reset - doesn't work. Can't even boot into recovery... Now it's sent back to Motorola I would love to know what happened there on a complete stock phone with just a very few apps and just used for messaging, calls and photos. I hope Motorola says what went wrong when the phone is repaired.
Try to uninstal apps and try instal again.Maybe not completed installed before.
My girlfriends phone started doing the exact same thing this morning, what was the outcome? Did they replace the phone?
Hello,
Long time lurker, first time poster, so forgive me in advance for any rules I've overlooked. I'll start by saying I am the legitimate owner of the phone. I have searched all over for information regarding FRP bypass for this particular phone and version, but have come up with nothing. I believe I found a method that gets me halfway to the goal, but I'm stuck at a particular point. Let me quickly go through what I've done so far;
1) After factory reset, from the main setup screen, go into accessibility.
2) At the bottom, click Switch Access.
3) Enable Switch Access, and then click settings in the lower right.
4)At the bottom, click Assign Keys to Actions
5) At the bottom, assign a key press to overview. I use volume down.
6) Back out to the device setup home screen.
7) Click through until you reach the network selection screen.
8) You will need to connect to a network that requires sign-in through a browser. The xfinity hotspots work the best.
9) Once connected to xfinity, the phone will auto open Chrome.
10) Use a free trial for xfinity hotspot, or log in with your comcast credentials.
11) Search google for "google maps", and find the result for google maps.
12) when you click on the google maps link, it will open a menu asking you to choose either chrome or the maps app.
13) select the maps app, and do a search for a random business that has a phone number.
14) Once the business info comes up, click call.
15) This will open the phone app. From there, go into the settings, and click on sound settings.
16) Voila! This brings you to the settings menu.
Now, my issue. It seems there is no way (or no option at least) to do a soft system restore from within the operating system. Now, I have tried disabling various apps, and stopping various proccesses in order to remove whatever process is responsible for the FRP notice, but to no avail. Ive even rooted the device and uninstalled anything I could think might be the culprit.
What do we do next folks??
Halp!
Thanks.:good:
I had this happen to me earlier and used this method. www(dot)youtube(dot)com/watch?v=b7xlXPDBxmY Just go download the file over at his blog. Put the phone in download mode and pick option #2. His phone reboots automatically in the video. Mine didn't, but I just powered it off and back on. I then had the option to skip past the the email portion.
just unplug ur router exactly when the phone says checking for updates and it'll let you skip the whole Google account thing. but you have to do it at the perfect time. took me 5 or 6 tries but it worked[emoji56]
Sent from my LGLS885 using XDA-Developers mobile app
Bumping to see if there's been another legit solution. I too have an LG G Stylo locked with the FRP. I've tried reflashing stock firmware, I've tried the Tungkick software, I've tried 6th_hokage's sofrware too, still no success.
theycallmegriz said:
Bumping to see if there's been another legit solution. I too have an LG G Stylo locked with the FRP. I've tried reflashing stock firmware, I've tried the Tungkick software, I've tried 6th_hokage's sofrware too, still no success.
Click to expand...
Click to collapse
https(colon)//youtu(dot)be/sNPdLHu33ac
logikgr said:
https(colon)//youtu(dot)be/sNPdLHu33ac
Click to expand...
Click to collapse
Thanks but no, doesn't work. The overview and allow from unknown sources features have been patched. Can't use either option despite being able to backdoor into the browser, downloading the app, and even selecting it to install.
Interesting. What version numbers do you have?
logikgr said:
Interesting. What version numbers do you have?
Click to expand...
Click to collapse
It's Running Marshmallow, 6.1, ZV7 iirc. it's the sprint Variant.
has anyone tried just unplugging ur router at the precise time that ur phone switches to"checking for updates"? worked for me!
Sent from my LGLS770 using XDA-Developers mobile app
I have a lg g vista with frp lock. My issue is on setup wizard screen i have no accessibility button under language tab. Why. Can it be reinstalled. Or is there another way to bypass. Thanks
Done and done
Ive got this tackeled and hog-tied. I can walk you through it. Message me.
Skitzo2346 said:
Ive got this tackeled and hog-tied. I can walk you through it. Message me.
Click to expand...
Click to collapse
Im having this problem as well, any help would be greatly appreciated
easy peasy
Look I nuked my phone I'm typing on a tripped out barcode scanner. I used lg backup to get through on my stylo. After the reset try and connect to a generic WiFi and then do a screen shot and share it via email that will get you on the web and then you should be able to search for and open up the settings app by choosing manage accounts while in the browser. Once your in settings clear all data on every app that says Google. But if you clear setup wizard you should be good. Then you should be able to restart as a new device
Try disabling the Set Up Wizard
Skitzo2346 said:
Ive got this tackeled and hog-tied. I can walk you through it. Message me.
Click to expand...
Click to collapse
How did you do it?
I've made it to the browser and google settings to manage account but it keeps trying to log me in google and ibcant access phone settings
Skitzo2346 said:
Ive got this tackeled and hog-tied. I can walk you through it. Message me.
Click to expand...
Click to collapse
hey can I get some help with this?
---------- Post added at 03:15 PM ---------- Previous post was at 02:58 PM ----------
Skitzo2346 said:
Ive got this tackeled and hog-tied. I can walk you through it. Message me.
Click to expand...
Click to collapse
what's the trick?
No matter what you do if you can use any method to access the settings app/page from there you can go into the apps section and just disable the setup wizard and you'll get into the phone.
Ive been working on this for hours it feels like, last time i bypassed in ten minutes (different phone). Wont allow me to disable setup wizard or google play services, what options are there? Everything i have tried they have blocked ...
i am unable to opt in the beta program with my pixel 2. whenever i click the opt in button it shows ''we could not enroll your device at this time please try again later" .
Try it from your PC. I did it that way and it worked
dracushor87 said:
Try it from your PC. I did it that way and it worked
Click to expand...
Click to collapse
no it's not working for me i tried from pc too.
Is p beta stable enough for everyday use?
Rotten Ross said:
Is p beta stable enough for everyday use?
Click to expand...
Click to collapse
I believe so. I've been running since it dropped. I haven't had any force closes and the only happens you I've had was with Nova Launcher not showing apps in the drawer and vertical mode. Other than that it's been running good.
jfdebo779 said:
I believe so. I've been running since it dropped. I haven't had any force closes and the only happens you I've had was with Nova Launcher not showing apps in the drawer and vertical mode. Other than that it's been running good.
Click to expand...
Click to collapse
Not sure if you found the fix but you can use Nova Launcher app drawer if you go into settings and change the toggle for card mode to on.
jfdebo779 said:
I believe so. I've been running since it dropped. I haven't had any force closes and the only happens you I've had was with Nova Launcher not showing apps in the drawer and vertical mode. Other than that it's been running good.
Click to expand...
Click to collapse
Wonderful I don't use any 3rd party launchers so that won't be an issue for me. As this is a beta how often is there updates? Just curious
No problems with Smart Launcher
i got enrolled today morning.. running smoothly so far..
Anyone else really annoyed by the clock being on the left? Beside that it runs and feel great, just a left sides clock is a no for me, hopefully we can move it back in later builds
A few Android P questions/observations that someone might be able to answer as I've had a few minutes to actually use it:
- What is the "Actions Services" and Suggestions app?
- Is there a way to enable locations services but not use GPS to save battery? I only see on/off and when on it says it will use GPS, mobile data, and wi-fi.
Has any one noticed that album are in play music is messed up on P? Mine is all over the place since i updated to P.
mikeynavy1 said:
A few Android P questions/observations that someone might be able to answer as I've had a few minutes to actually use it:
- What is the "Actions Services" and Suggestions app?
- Is there a way to enable locations services but not use GPS to save battery? I only see on/off and when on it says it will use GPS, mobile data, and wi-fi.
Click to expand...
Click to collapse
There is no need now for the battery saving option in location. There is considerable improvement in battery and GPS does not take away any significant chunk of battery. I am not sure about Actions Services and Suggestions. However, I guess it must be the app for predictive AI based actions.
I'm unable to enroll into the Android P Beta program despite being on a Google Pixel 2. I'm encountering this message - "There are no eligible devices associated with this Google account". Please help!
yogesh_MCFC said:
I'm unable to enroll into the Android P Beta program despite being on a Google Pixel 2. I'm encountering this message - "There are no eligible devices associated with this Google account". Please help!
Click to expand...
Click to collapse
Flash the whole factory image for DP2 instead.
I have flashed an image before and I'm not sure how to do it as well. I wanted to opt in using the rootless option. Could you please help me out as to why I don't see my Pixel 2 listed on my devices on Google Play? TIA.
xFirefly93 said:
Flash the whole factory image for DP2 instead.
Click to expand...
Click to collapse
I think I've found a fix. I removed my google account from the "Accounts" section. Then restarted the phone. It prompted me on restart to sign-in again and I did. Then I went & synced the account, and then downloaded one random app onto my device. Then checked again in Play > Settings and it was there! Magic! Now I can view my device on Google Play & I'm able to download the Android P Beta. It's pretty good.
Anyone know of a way to roll back to 8.1 without losing data? I'm rooted with magisk
I tried installing via system image but the phone will stay on the loading G on boot.
If I try fastboot boot TWRP.img, data is encrypted.
marc.ientilucci said:
Anyone know of a way to roll back to 8.1 without losing data? I'm rooted with magisk
I tried installing via system image but the phone will stay on the loading G on boot.
If I try fastboot boot TWRP.img, data is encrypted.
Click to expand...
Click to collapse
I would recommend a clean flash of latest 8.1 firmware (May security patch) by flashing the factory image.
xFirefly93 said:
I would recommend a clean flash of latest 8.1 firmware (May security patch) by flashing the factory image.
Click to expand...
Click to collapse
This is what I tried.
Hello,
I have recently purchased GW4 Classic, and had the "this watch isn't supported" message, It drove myself and appears others also nuts and frusterated, but the best solution is below.
If you have purchased a GW4 Watch and your device is either from a different country than your phone, or a different brand you will have a "region/device" lock the watch. When you use the Galaxy wearables app, the watch will not sync and a message "this watch isn't supported on this device" will appear.
There is a great and somewhat easy workaround that has been floating around the internet but it missed one very key important detail, don't try to use samsung health to connect, it will just fail.
Workound:
Apps - Wearos app
Galaxy wearables app
Steps:
1) go to wearos app settings
2) open Galaxy wearables
3) open wearos and try to connect your device, quickly switch to wearos app settings, and force stop "kill: wear os before the sync code appears on your phone and watch.
4) after force kill of the wear os, just continue on Galaxy wearables app.
and it will setup your device.
I hope this helps.
What do you mean by dont change page?
When i open wearOS it would ask me to link and pair my galaxy watch. Should i pair it then go to settings and force stop the app?
weng_cas said:
What do you mean by dont change page?
Click to expand...
Click to collapse
I mean just open the app, don't go to the sync page
weng_cas said:
When i open wearOS it would ask me to link and pair my galaxy watch. Should i pair it then go to settings and force stop the appointment the
Click to expand...
Click to collapse
weng_cas said:
When i open wearOS it would ask me to link and pair my galaxy watch. Should i pair it then go to settings and force stop the app?
Click to expand...
Click to collapse
When wearos asks to sync, force close before the sync code pop-up on your watch
I somehow solve the problem "this watch isn't supported on this phone"
But my watch is purchased from China, so I cannot connect to my google account.
Any solution to this?
jazzpasta said:
I somehow solve the problem "this watch isn't supported on this phone"
But my watch is purchased from China, so I cannot connect to my google account.
Any solution to this?
Click to expand...
Click to collapse
Could you please let me know how you solved it? I also has Chinese version Galaxy watch 4 classic. But my phone is SM-G977N (Korea version), so I can't connect my watch to my phone.
jazzpasta said:
I somehow solve the problem "this watch isn't supported on this phone"
But my watch is purchased from China, so I cannot connect to my google account.
Any solution to this?
Click to expand...
Click to collapse
I have the same issue，I believe it's something to do with the OS maybe doesn't have Google services like most devices here
phoenix377 said:
Could you please let me know how you solved it? I also has Chinese version Galaxy watch 4 classic. But my phone is SM-G977N (Korea version), so I can't connect my watch to my phone.
Click to expand...
Click to collapse
My watch and device is same as yours, use wearos to initialize the pairing but quickly force close it before the watch displays a pop-up to connect the watch, switch over to galaxy wearables and go through the steps as usual. Any problems then it's the timing of closing wearos
flor00451 said:
My watch and device is same as yours, use wearos to initialize the pairing but quickly force close it before the watch displays a pop-up to connect the watch, switch over to galaxy wearables and go through the steps as usual. Any problems then it's the timing of closing wearos
Click to expand...
Click to collapse
I tried it, but it's not working.
Could you please let me know your OS version, Galaxy wear app version and wear os app version?
Thanks.
phoenix377 said:
I tried it, but it's not working.
Could you please let me know your OS version, Galaxy wear app version and wear os app version?
Thanks.
Click to expand...
Click to collapse
Sure, I can tell you that, but it's mostly the timing issue, you need to be very quick before your phone and watch gives you a sync code, basically as soon as wearos finds your device and you change pages to sync you should switch over to the app control and kill the app process
Phone: Android 12, UI 4.0
Wearos: V.2.52
Galaxy wearable: V.2.247
Mine is back working now. I just uninstalled gpay on the watch and reinstalled it, try it for yourselves
flor00451 said:
Sure, I can tell you that, but it's mostly the timing issue, you need to be very quick before your phone and watch gives you a sync code, basically as soon as wearos finds your device and you change pages to sync you should switch over to the app control and kill the app process
Phone: Android 12, UI 4.0
Wearos: V.2.52
Galaxy wearable: V.2.247
Click to expand...
Click to collapse
Finally, I succeed at connecting my watch following your instructions.
Thanks.
phoenix377 said:
Finally, I succeed at connecting my watch following your instructions.
Thanks.
Click to expand...
Click to collapse
Glad it helped
flor00451 said:
Glad it helped
Click to expand...
Click to collapse
Sorry to bother you, but I'm new to this and I'm not sure if I understand correctly.
If I manage to connect Chinese watch to the app this way, it will change geo location of the watch?
Because I managed to connect it (had the same error) by pairing watch with phone (in Bluetooth menu) and then quickly clicking on the watch in the Samsung app.
But it remained a Chinese version without any Google services, and trying to connect to the Chinese Samsung website for signing in to the account (with error I must add)
mWatcher said:
Sorry to bother you, but I'm new to this and I'm not sure if I understand correctly.
If I manage to connect Chinese watch to the app this way, it will change geo location of the watch?
Because I managed to connect it (had the same error) by pairing watch with phone (in Bluetooth menu) and then quickly clicking on the watch in the Samsung app.
But it remained a Chinese version without any Google services, and trying to connect to the Chinese Samsung website for signing in to the account (with error I must add)
Click to expand...
Click to collapse
mWatcher said:
Sorry to bother you, but I'm new to this and I'm not sure if I understand correctly.
If I manage to connect Chinese watch to the app this way, it will change geo location of the watch?
Because I managed to connect it (had the same error) by pairing watch with phone (in Bluetooth menu) and then quickly clicking on the watch in the Samsung app.
But it remained a Chinese version without any Google services, and trying to connect to the Chinese Samsung website for signing in to the account (with error I must add)
Click to expand...
Click to collapse
This way is just to connect to a non Chinese phone, of course the watch will remain Chinese because of the OS, not because region lock