Database Info

PX5 Upgrade problem

Hi All,
Ive just installed the PX5 upgrade to my joying Radio.
Got to say, its a lot faster than before, but ive noticed a problem with Spotify which i didnt had before.
It seems like everytime the device is working, the sound starts to stutter.
Theres an example:
https://youtu.be/lzHrBPQZsnw
I definetaly didnt had that before...
And also, when the device is cold( first start within an hour or so) i get some strange lines on my display. They will dissapear within 5 or 10 minutes... any ideas about this?
https://imgur.com/gallery/4a9L7
Thanks for your help

I have a little stutter in Spotify, but it has only 2 or 3 times, when I just started the app. After that it's gone. Did the same update from px3 to px5 on my joyous.
The lines I don't know...
Did you update mcu ? Don't know if that's got to do with anything ?

Wout2426 said:
I have a little stutter in Spotify, but it has only 2 or 3 times, when I just started the app. After that it's gone. Did the same update from px3 to px5 on my joyous.
The lines I don't know...
Did you update mcu ? Don't know if that's got to do with anything ?
Click to expand...
Click to collapse
Jup, updated the mcu... was on the original joying mcu and now on hotaudio...
Also tried malaysk custom rom... same problems there...

Did the stuttering and lines appear with px5 installed and joying mcu?
Enviado desde mi D6603 mediante Tapatalk

ikerg said:
Did the stuttering and lines appear with px5 installed and joying mcu?
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Yes.

Where to buy the PX5 board
Wout2426 said:
I have a little stutter in Spotify, but it has only 2 or 3 times, when I just started the app. After that it's gone. Did the same update from px3 to px5 on my joyous.
The lines I don't know...
Did you update mcu ? Don't know if that's got to do with anything ?
Click to expand...
Click to collapse
Hi
Where did you bought the PX5 board, please supply link..

Bought mine from here ==> https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
Still not shipped ;-(

jancz said:
Hi
Where did you bought the PX5 board, please supply link..
Click to expand...
Click to collapse
https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
the one everybody gets it at the moment...
already contacted them, no answer yet

SynMaki said:
https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
the one everybody gets it at the moment...
already contacted them, no answer yet
Click to expand...
Click to collapse
Yup, that's where I bought it to. Strange thing is that there's no feedback rating. I gave mine.....

Wout2426 said:
Yup, that's where I bought it to. Strange thing is that there's no feedback rating. I gave mine.....
Click to expand...
Click to collapse
I also gave a feedback rating on an order I placed thru them. I think that perhaps they have a say on the approvals? Personally had no problems, left a positive feedback.

I'm also waiting for mine...
Should be here in a week or so... Will report how it goes.

Mine is "shipped"... Don´t know how long it will take to germany ;-(
Only 39 orders at the moment?!

SynMaki said:
Hi All,
Ive just installed the PX5 upgrade to my joying Radio.
Got to say, its a lot faster than before, but ive noticed a problem with Spotify which i didnt had before.
It seems like everytime the device is working, the sound starts to stutter.
Theres an example:
I definetaly didnt had that before...
And also, when the device is cold( first start within an hour or so) i get some strange lines on my display. They will dissapear within 5 or 10 minutes... any ideas about this?
https://imgur.com/gallery/4a9L7
Thanks for your help
Click to expand...
Click to collapse
Is this unique to just Spotify for you? I get this same type of stutter for a second or two randomly with basically any type of playback that doesn't involve the radio, which for whatever reason is unaffected.
This stuttering seems to be more frequent the more I try to do with the unit, eg open other apps, use something that involves data transfer, etc.

droc.noles said:
Is this unique to just Spotify for you? I get this same type of stutter for a second or two randomly with basically any type of playback that doesn't involve the radio, which for whatever reason is unaffected.
This stuttering seems to be more frequent the more I try to do with the unit, eg open other apps, use something that involves data transfer, etc.
Click to expand...
Click to collapse
No, i also get it on every other Audio source, but it seems like ive got it most on Spotify.
The main Problem i wont use bluetooth is the "poor" quality of the sound.
Do you also using the upgrade?

SynMaki said:
No, i also get it on every other Audio source, but it seems like ive got it most on Spotify.
The main Problem i wont use bluetooth is the "poor" quality of the sound.
Do you also using the upgrade?
Click to expand...
Click to collapse
Interesting - I don't experience any audio stuttering issues. What firmware and MCU versions are you running?

marchnz said:
Interesting - I don't experience any audio stuttering issues. What firmware and MCU versions are you running?
Click to expand...
Click to collapse
Im currently on:
Latest Stock Firmware:
20170506 FW
Found in this thread:
https://forum.xda-developers.com/an...px5-mtcd-head-unit-discussion-thread-t3573881
And already tried malaysk PX5 Rom
MCU is currently:
V2.52 https://www.sendspace.com/pro/dl/4iad57
Found here
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
But also had the problem with the joying MCU

SynMaki said:
No, i also get it on every other Audio source, but it seems like ive got it most on Spotify.
The main Problem i wont use bluetooth is the "poor" quality of the sound.
Do you also using the upgrade?
Click to expand...
Click to collapse
I'm on native Dasaita PX5, no upgrade. It is interesting, however, that you experience the same problem with your PX5 unit. Seems to be very much hit or miss from the responses I've seen here.

droc.noles said:
I'm on native Dasaita PX5, no upgrade. It is interesting, however, that you experience the same problem with your PX5 unit. Seems to be very much hit or miss from the responses I've seen here.
Click to expand...
Click to collapse
Hm thats rly interesstyng....
Ive also thought it could be a heat problem but ive also switched the thermal paste on the heat sink --> no difference..
im currently thinking to switch to an Joying Sofia device since i dont want to go back to a slower rk3811 device..

What units are experiencing this issue? Maybe we can narrow it down. It might be a hardware issue. I have a KGL unit, going to see if anyone with a KGL has any issues.

SynMaki said:
Got to say, its a lot faster than before, but ive noticed a problem with Spotify which i didnt had before.
It seems like everytime the device is working, the sound starts to stutter.
Theres an example:
https://youtu.be/lzHrBPQZsnw
I definetaly didnt had that before...
Click to expand...
Click to collapse
I have original Dasaita HotAudio PX5 unit and Spotify stutters the same way. I've seen others mentioning it too. So ... it is not because you made the upgrade yourself - but it's just the current nature of the PX5 + Android 6, etc. combo. I just flashed the latest MCU version 2.56 and the stutter is still there.
I didn't have such stutter with my previous unit (KLD PX3 with KitKat)

Bluetooth Loosing Name/Passcode

Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!

ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
Is the Bluetooth correctly setup in factory settings?

hans.vinkers said:
Is the Bluetooth correctly setup in factory settings?
Click to expand...
Click to collapse
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all

ajp8868 said:
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
Click to expand...
Click to collapse
Maybe try a different phone just for testing

hans.vinkers said:
Maybe try a different phone just for testing
Click to expand...
Click to collapse
I'll give it a go, but it's the actual box that is loosing its name and passcode when you go into Bluetooth settings. I've tried restarting it this morning 3 times but can't get it to work

Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?

ajp8868 said:
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
Click to expand...
Click to collapse
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them

WarSpaz said:
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
Click to expand...
Click to collapse
Ahh that would make sense! Strange I thought this would conflict with the on-board bluetooth

AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.

Same problem...
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
The same situation with my PX5 Dasaita - very rare, but some times bluetooth looses name and password. Can t find what is the cause...
Regards

I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.

ikerg said:
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Click to expand...
Click to collapse
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk

abagos said:
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
Click to expand...
Click to collapse
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
WarSpaz said:
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Now that sounds good, any chance you remember where?

ajp8868 said:
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
Now that sounds good, any chance you remember where?
Click to expand...
Click to collapse
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk

WarSpaz said:
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.

andysabre said:
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
Click to expand...
Click to collapse
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first

ajp8868 said:
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
Click to expand...
Click to collapse
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye

andysabre said:
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
Click to expand...
Click to collapse
Perfect thanks, good luck with yours!

Deleted

Hello, i have the same problem with the same bt chip.
SD-968 on Eonon navigation. Last summer it was working ok if i remember correctly when i was on stock rom, but then i changed to malasyk and hal9k, and i have problems.
I checked the factory settings and i have SD-968 option on BT. I even dissasembled the navigation to physically check if i have SD-968 and its there!
If i put the navi to autosleep, almost never wakes up with BT available. Always no name and no password with no luck of writing them back. The only solution is to reset the navi once, maybe twice.
I tried to put it on auto off after 30mins, so it will do a full bootup, and maybe 5 times out of 10, it works.
Maybe is has something to do with the cold? i tried the navi on my table in the house and it was a perfect 10/10 at bootup.

ROM GS PX5 MTCDE 4GB 32GB 8.0 Factory Firmware ( Xtrons PB78MTWP )

This is the email received from Xtrons:
"Please try this link to upgrade the firmware of the unit.
https://1drv.ms/u/s!AjrY0uqbW_kBhCr0zB8pj-rIig_U
Please unzip the rar file and copy it onto a format TF card (like fat32)
And please insert the card to the GPS slot.
And please long press power button until the light flash, then press the RESET button quickly and then release the power button for
1s. Then press power button for 3s and you can enter this page.
Please choose these two options. Long press the power button means confirm.
And short press the power button means select.
Besides, please choose to apply update package from SD card or USB.
Please do not hesitate to contact us should you have any further questions.
Kind regards,
Abby
XTRONS Customer Service Team
eCommerce support powered by ReplyManager
On Sunday, April 1, 2018 at 5:08 AM,

catelusii said:
This is the email received from Xtrons: Abby .. XTRONS Customer Service Team
Click to expand...
Click to collapse
some guy has removed the previous post I saw.. so..
thanks again for posting this "newer" fw and thanks to Abby too, I have already installed it at 02.00 and test it today, everything works perfectly as usual.
keep them coming mate.

Feelback
catelusii said:
This is the email received from Xtrons:
"Please try this link to upgrade the firmware of the unit.
https://1drv.ms/u/s!AjrY0uqbW_kBhCr0zB8pj-rIig_U
Please unzip the rar file and copy it onto a format TF card (like fat32)
And please insert the card to the GPS slot.
And please long press power button until the light flash, then press the RESET button quickly and then release the power button for
1s. Then press power button for 3s and you can enter this page.
Please choose these two options. Long press the power button means confirm.
And short press the power button means select.
Besides, please choose to apply update package from SD card or USB.
Please do not hesitate to contact us should you have any further questions.
Kind regards,
Abby
XTRONS Customer Service Team
eCommerce support powered by ReplyManager
On Sunday, April 1, 2018 at 5:08 AM,
Click to expand...
Click to collapse
---------------------------------------------------------------------
Hello
Sorry for my expression, I am French and I use Google Translate.
I'm ready the new post Xtrons TE706PL Android 8 with 4GB, but having been disappointed by my old Xtrons TB706APL, before making my purchase, could you give me a feedback of your experience on the quality of this new product based on PX5 and Android 8, here are the malfunctions that I had met:
-Horrible echo in telephone communication for me and my interlocutor despite the settings in the menu system, whether with internal or external microphone and despite the many updates to MCU or ROM.
-Imcompatibility between Wifi and Bluetooth, if the Bluetooth is active, the Wifi signal was parasitized and impossible to have a stable internet connection.
-Poor quality of the screen, very sensitive to the sun, and under Waze or Maps, the names of the streets were hatched, see impossible to read, if you could post a screen copy with Waze it would be cool.
-Excessive CPU heat, I added a fan to cool the CPU card otherwise it was a regular reboot.
-A radio interface worthy of the year 1980.
-No presentation of the name of the person calling me, only the phone number.
-In the system menu it was possible to turn on the function keys permanently but this option did not work.
No support from Xtrons despite my many emails
In advance thank you for your return.

This is HCT as per all other MTCD PX5 Android 8 with minor vendor customisations.
The HA firmware thread has this version, you're not getting anything 'new'.
The reset procedure is GS MTCD procedure.
As @typos1 might say...the model code is meaningless, Xtrons are a reseller, GS is the factory who manufacture the unit. Expanding on that, all MTCD manufacturers reuse HCT design and firmware.
Perhaps post in an existing thread.

marchnz said:
This is HCT as per all other MTCD PX5 Android 8 with minor vendor customisations.
The HA firmware thread has this version, you're not getting anything 'new'.
The reset procedure is GS MTCD procedure.
As @typos1 might say...the model code is meaningless, Xtrons are a reseller, GS is the factory who manufacture the unit. Expanding on that, all MTCD manufacturers reuse HCT design and firmware.
Perhaps post in an existing thread.
Click to expand...
Click to collapse
Mate,
Everything you wrote is almost correct.. but if I have a Honda car I would like to have a Honda sw and look and "feel" too and I knew that all Japanese cars are similar but for me the Honda sw has the priority if I have one, and no I do not have a Honda car but (only germany quality) as an example, we already knew where all those headunits came from and which company behind the fw / sw too so there is nothing news under the sun.. however, I always have trouble with the newer sw and update of gs seller because they are too slow when it came to sw update and men had to asking them many times and sending requests after requests to get a "newer" sw from them, had and have long experience with them.. so that's why men had to thanks this guy and also that Abby from xtrons for the sw and for placing it on the forum..
that is also the intentions and purpose of such forums.. right?
Anyway.. good luck!

Mad_Mod said:
Mate,
Everything you wrote is almost correct.. but.....
that is also the intentions and purpose of such forums.. right?
Anyway.. good luck!
Click to expand...
Click to collapse
You want a GS lightly customised HCT android firmware, which essentially is only the launcher and you wanted to thank the poster. OK, that's fine, there are related appropriate threads which exist without posting a new and duplicate threads.
Note, again, you're not getting anything 'new' from GS, you get the same HCT firmware as HA, drivers, issues, bugs, but with a GS launcher. There's plenty of information about thiis.

marchnz said:
You want a GS lightly customised HCT android firmware, which essentially is only the launcher and you wanted to thank the poster. OK, that's fine, there are related appropriate threads which exist without posting a new and duplicate threads.
Note, again, you're not getting anything 'new' from GS, you get the same HCT firmware as HA, drivers, issues, bugs, but with a GS launcher. There's plenty of information about this.
Click to expand...
Click to collapse
That's almost right too, and because I'm from yesterday with this hassle?, as you really thought, I would like to use the gs sw only and not that one of ha or from other brand names which is totally too ugly also in terms of ui & launcher in my eyes etc.
you can and may say your opinion as long as you believe in it, but I stick to my own gs headunit and the sw of it / for it, it has to do with taste differences.. maybe?.

Hello,
can I use the update synonymous with 2GB?
greeting
Max

maxego said:
Hello,
can I use the update synonymous with 2GB?
greeting
Max
Click to expand...
Click to collapse
If you means can i use it on my hu with 2gb? the answer is Yes, I also have 2gb hu here.

Mad_Mod said:
but for me the Honda sw has the priority if I have one
Click to expand...
Click to collapse
There is no "Honda" software, the only thing "Honda" about it is the boot logo, which is the same for ALL MTCB/C/D/E units.

typos1 said:
There is no "Honda" software, the only thing "Honda" about it is the boot logo, which is the same for ALL MTCB/C/D/E units.
Click to expand...
Click to collapse
Absolutely not correct (really? yes, canbus !!) and as I ever replied to you I was one of the first who post a px5 headunit here on this forum with pictures before you ever came here.. so will you stop with such tasteless repetitions such as the manufacturer of those headunits and which company makes the sw/fw developments etc??? because I always when I read your reply to me I fell sick!!
as I once rebutted to you that I'm never been from yesterday with these hu's px3 + px5 + S6, Eonon, Pioneer, Albina, and much more while you not even have one of them and car's too!
with other words take your replys somewhere else.

Mad_Mod said:
#13 repeatedly reading it.. read it again and again until it gets through your deaf ears.. Understand???
I was one of the first with the px3 & pic's placed too here on this forum and also the first one with the px5 & pic's placed here on this forum too so where you came from??? as I said: LIAR!!! you was on B but never ever on C, D, E forum!!
Click to expand...
Click to collapse
I said "MTCB/C/D/E head unit forums" I did not specify which of them, a "PX3" is an RK3188, they are one and the same. Please stop the aggression and the abuse.
You joined in February of this year according to your profile .

Did a thread cleanup, please chill out guys.
Get back on topic please, there is no need to insult or offend anyone to make a point.

All,
Please stay on topic. This isn't the place to argue and bash each other.. This is a place to work together in order to achieve a common goal.
Play nice!
-snickler

I am so sorry to see people arguing for my post.
Yes, some love the GS UI
... for me, 8.0 GS UI it is the cleanest, fresh, modern UI from the all HU market. It is my opinion, but I am an professional artist and I know what I say.
So, please, just test and you will see.
P.S. I hope in a good ROOT metod for Oreo to root the GS original ROM.
Malaysk ROM is verry good... (Thanks for his hard work; I build custom roms in the past and I know the hard work.)
But his ROM has little problems with the temp of CPU (is verry HOT) and the UI is a litlle kitch in some aspects.
I know... I can use Nova launcher and icon packs but not all peopel have time and good design knowledge.
For me, Malaysk ROM grafic UI is OLD and UGLY. Better he will use the new UI in the new Malaysk ROM Rlease.
I write to him but he do not answer.
Have a nice day !

catelusii said:
I am so sorry to see people arguing for my post.
Yes, some love the GS UI
... for me, 8.0 GS UI it is the cleanest, fresh, modern UI from the all HU market. It is my opinion, but I am an professional artist and I know what I say.
So, please, just test and you will see.
P.S. I hope in a good ROOT metod for Oreo to root the GS original ROM.
Malaysk ROM is verry good... (Thanks for his hard work; I build custom roms in the past and I know the hard work.)
But his ROM has little problems with the temp of CPU (is verry HOT) and the UI is a litlle kitch in some aspects.
I know... I can use Nova launcher and icon packs but not all peopel have time and good design knowledge.
For me, Malaysk ROM grafic UI is OLD and UGLY. Better he will use the new UI in the new Malaysk ROM Rlease.
I write to him but he do not answer.
Have a nice day !
Click to expand...
Click to collapse
I do not like the look of Malask's ROM either.
I suspect that he does not reply because he does his ROM to his taste and any requests to change it are likely cause him offense.
When it comes to looks/design though, there is no right or wrong, it is all down to personal taste.

typos1 said:
I do not like the look of Malask's ROM either.
I suspect that he does not reply because he does his ROM to his taste and any requests to change it are likely cause him offense.
When it comes to looks/design though, there is no right or wrong, it is all down to personal taste.
Click to expand...
Click to collapse
I choose my words..... I tell him to make aroma installer if it is possible.

catelusii said:
I choose my words..... I tell him to make aroma installer if it is possible.
Click to expand...
Click to collapse
I see, well his English is not good and he does get a lot of pms so maybe he will reply eventually.

Can i install this rom over the Malask's ROM? If Yes how? Ì have an xtrons px5 with 4gb ram

giannnnn said:
Can i install this rom over the Malask's ROM? If Yes how? Ì have an xtrons px5 with 4gb ram
Click to expand...
Click to collapse
Yes, you can install any ROM for MTCD/E RK3358/PX5 units, are you on Oreo or MM ?
BTW you dont have an Xtrons, they are a seller only, your MCU will tell you what unit you have.

Is bluetooth audio delay fixable?

I recently purchased a PX5-based MTCE unit (Xtrons TE103AP for those wondering) and I honestly like it except the fact that it has a severe audio delay in bluetooth I contacted xtrons regarding this but they haven't replied yet (been ~3 days) and I've updated the MCU from V2.9 to V3 (GS) along with a system update that pushed the security patch date 2017 to oct 2018 but the issue persists.
Is there a solution to this problem?

Anyone can shed light on this issue?

battler624 said:
Anyone can shed light on this issue?
Click to expand...
Click to collapse
Have a read through forums.

marchnz said:
Have a read through forums.
Click to expand...
Click to collapse
I've spent ~2 hours looking up stuff here, most of the posts i've found were near sep of last year and had no answers.

what android version does it have?

Did you ever find a fix? Got same issue.

Question IDOING with Topping D10s - No Audio

Hi everyone,
Looking for a bit of help here. I have an Idoing in my subaru WRX and I decided to upgrade from RVA to optical into my DSP. So, I got a Topping D10s, hooked it up, and no audio output. The D10s is getting power but no audio. Is there something that I need to do within the Idoing to enable USB audio or ?
This is the head unit:
https://www.aliexpress.us/item/2251832768778756.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Appreciate any insight. Thanks

mxl160 said:
Hi everyone,
Looking for a bit of help here. I have an Idoing in my subaru WRX and I decided to upgrade from RVA to optical into my DSP. So, I got a Topping D10s, hooked it up, and no audio output. The D10s is getting power but no audio. Is there something that I need to do within the Idoing to enable USB audio or ?
This is the head unit:
https://www.aliexpress.us/item/2251832768778756.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US
Appreciate any insight. Thanks
Click to expand...
Click to collapse
Is it an FYT based device, post Android system information including MCU version

Please disregard. I got it to work.

mxl160 said:
Please disregard. I got it to work.
Click to expand...
Click to collapse
Then share how you did it. It might help other users in the future.