Related
Hi to all. Sorry for my English, i'm italian
I have an ENORMOUS problem. I bought an adapter -miniUSB to 3.5 mm- for my P3600 on Ebay -very simple without any ext-miniusb or similar-. But i have read that the Trinity recognizes only Original Headphones.. My audio adapter doesn't work. Songs and other sounds continues to exit by built-in speaker. Someone has an idea? Maybe does exist a driver? -I tried the Remote Controller Y Cable without results-
Thanks in advice to all!
Badelrov91 said:
Hi to all. Sorry for my English, i'm italian
I have an ENORMOUS problem. I bought an adapter -miniUSB to 3.5 mm- for my P3600 on Ebay -very simple without any ext-miniusb or similar-. But i have read that the Trinity recognizes only Original Headphones.. My audio adapter doesn't work. Songs and other sounds continues to exit by built-in speaker. Someone has an idea? Maybe does exist a driver? -I tried the Remote Controller Y Cable without results-
Thanks in advice to all!
Click to expand...
Click to collapse
I remembered similar things have been discussed in previous posts, and I think you 'll get way out there for problems on the audio adapter that you face! should try to look at http://forum.xda-developers.com/showthread.php?t=380420
Thank you so much for the answer.
I read all the discussion but i didn't find anything. There is a question in that discussion of a member but there isn't any answers. >_< I'm hopeless..
Does exist some small-programs or drivers, or similar?? >_<
Badelrov91 said:
Thank you so much for the answer.
I read all the discussion but i didn't find anything. There is a question in that discussion of a member but there isn't any answers. >_< I'm hopeless..
Does exist some small-programs or drivers, or similar?? >_<
Click to expand...
Click to collapse
maybe an apps like HTC Audio Booster, HTC Eqalizer , or SRS WOW HD can help
My mind has a big problem. I bought a MINIUSB adapter.. Not a EXTUSB adapter.. MINIUSB doesn't carry on the audio.. Thanks to you Hakim.. I bought the wrong item..
Hi All,
Ive just installed the PX5 upgrade to my joying Radio.
Got to say, its a lot faster than before, but ive noticed a problem with Spotify which i didnt had before.
It seems like everytime the device is working, the sound starts to stutter.
Theres an example:
https://youtu.be/lzHrBPQZsnw
I definetaly didnt had that before...
And also, when the device is cold( first start within an hour or so) i get some strange lines on my display. They will dissapear within 5 or 10 minutes... any ideas about this?
https://imgur.com/gallery/4a9L7
Thanks for your help
I have a little stutter in Spotify, but it has only 2 or 3 times, when I just started the app. After that it's gone. Did the same update from px3 to px5 on my joyous.
The lines I don't know...
Did you update mcu ? Don't know if that's got to do with anything ?
Wout2426 said:
I have a little stutter in Spotify, but it has only 2 or 3 times, when I just started the app. After that it's gone. Did the same update from px3 to px5 on my joyous.
The lines I don't know...
Did you update mcu ? Don't know if that's got to do with anything ?
Click to expand...
Click to collapse
Jup, updated the mcu... was on the original joying mcu and now on hotaudio...
Also tried malaysk custom rom... same problems there...
Did the stuttering and lines appear with px5 installed and joying mcu?
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
Did the stuttering and lines appear with px5 installed and joying mcu?
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
Yes.
Where to buy the PX5 board
Wout2426 said:
I have a little stutter in Spotify, but it has only 2 or 3 times, when I just started the app. After that it's gone. Did the same update from px3 to px5 on my joyous.
The lines I don't know...
Did you update mcu ? Don't know if that's got to do with anything ?
Click to expand...
Click to collapse
Hi
Where did you bought the PX5 board, please supply link..
Bought mine from here ==> https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
Still not shipped ;-(
jancz said:
Hi
Where did you bought the PX5 board, please supply link..
Click to expand...
Click to collapse
https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
the one everybody gets it at the moment...
already contacted them, no answer yet
SynMaki said:
https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
the one everybody gets it at the moment...
already contacted them, no answer yet
Click to expand...
Click to collapse
Yup, that's where I bought it to. Strange thing is that there's no feedback rating. I gave mine.....
Wout2426 said:
Yup, that's where I bought it to. Strange thing is that there's no feedback rating. I gave mine.....
Click to expand...
Click to collapse
I also gave a feedback rating on an order I placed thru them. I think that perhaps they have a say on the approvals? Personally had no problems, left a positive feedback.
I'm also waiting for mine...
Should be here in a week or so... Will report how it goes.
Mine is "shipped"... Don´t know how long it will take to germany ;-(
Only 39 orders at the moment?!
SynMaki said:
Hi All,
Ive just installed the PX5 upgrade to my joying Radio.
Got to say, its a lot faster than before, but ive noticed a problem with Spotify which i didnt had before.
It seems like everytime the device is working, the sound starts to stutter.
Theres an example:
I definetaly didnt had that before...
And also, when the device is cold( first start within an hour or so) i get some strange lines on my display. They will dissapear within 5 or 10 minutes... any ideas about this?
https://imgur.com/gallery/4a9L7
Thanks for your help
Click to expand...
Click to collapse
Is this unique to just Spotify for you? I get this same type of stutter for a second or two randomly with basically any type of playback that doesn't involve the radio, which for whatever reason is unaffected.
This stuttering seems to be more frequent the more I try to do with the unit, eg open other apps, use something that involves data transfer, etc.
droc.noles said:
Is this unique to just Spotify for you? I get this same type of stutter for a second or two randomly with basically any type of playback that doesn't involve the radio, which for whatever reason is unaffected.
This stuttering seems to be more frequent the more I try to do with the unit, eg open other apps, use something that involves data transfer, etc.
Click to expand...
Click to collapse
No, i also get it on every other Audio source, but it seems like ive got it most on Spotify.
The main Problem i wont use bluetooth is the "poor" quality of the sound.
Do you also using the upgrade?
SynMaki said:
No, i also get it on every other Audio source, but it seems like ive got it most on Spotify.
The main Problem i wont use bluetooth is the "poor" quality of the sound.
Do you also using the upgrade?
Click to expand...
Click to collapse
Interesting - I don't experience any audio stuttering issues. What firmware and MCU versions are you running?
marchnz said:
Interesting - I don't experience any audio stuttering issues. What firmware and MCU versions are you running?
Click to expand...
Click to collapse
Im currently on:
Latest Stock Firmware:
20170506 FW
Found in this thread:
https://forum.xda-developers.com/an...px5-mtcd-head-unit-discussion-thread-t3573881
And already tried malaysk PX5 Rom
MCU is currently:
V2.52 https://www.sendspace.com/pro/dl/4iad57
Found here
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
But also had the problem with the joying MCU
SynMaki said:
No, i also get it on every other Audio source, but it seems like ive got it most on Spotify.
The main Problem i wont use bluetooth is the "poor" quality of the sound.
Do you also using the upgrade?
Click to expand...
Click to collapse
I'm on native Dasaita PX5, no upgrade. It is interesting, however, that you experience the same problem with your PX5 unit. Seems to be very much hit or miss from the responses I've seen here.
droc.noles said:
I'm on native Dasaita PX5, no upgrade. It is interesting, however, that you experience the same problem with your PX5 unit. Seems to be very much hit or miss from the responses I've seen here.
Click to expand...
Click to collapse
Hm thats rly interesstyng....
Ive also thought it could be a heat problem but ive also switched the thermal paste on the heat sink --> no difference..
im currently thinking to switch to an Joying Sofia device since i dont want to go back to a slower rk3811 device..
What units are experiencing this issue? Maybe we can narrow it down. It might be a hardware issue. I have a KGL unit, going to see if anyone with a KGL has any issues.
SynMaki said:
Got to say, its a lot faster than before, but ive noticed a problem with Spotify which i didnt had before.
It seems like everytime the device is working, the sound starts to stutter.
Theres an example:
https://youtu.be/lzHrBPQZsnw
I definetaly didnt had that before...
Click to expand...
Click to collapse
I have original Dasaita HotAudio PX5 unit and Spotify stutters the same way. I've seen others mentioning it too. So ... it is not because you made the upgrade yourself - but it's just the current nature of the PX5 + Android 6, etc. combo. I just flashed the latest MCU version 2.56 and the stutter is still there.
I didn't have such stutter with my previous unit (KLD PX3 with KitKat)
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
Is the Bluetooth correctly setup in factory settings?
hans.vinkers said:
Is the Bluetooth correctly setup in factory settings?
Click to expand...
Click to collapse
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
ajp8868 said:
From what I can tell yes, it's set as an sd-968 which works now and then. I've tried the others but they don't work at all
Click to expand...
Click to collapse
Maybe try a different phone just for testing
hans.vinkers said:
Maybe try a different phone just for testing
Click to expand...
Click to collapse
I'll give it a go, but it's the actual box that is loosing its name and passcode when you go into Bluetooth settings. I've tried restarting it this morning 3 times but can't get it to work
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
ajp8868 said:
Anybody know how to replace a bluetooth module on these units? The place I bought it from wants to send me a replacement module but I assumed it would be a chip on the board?
Click to expand...
Click to collapse
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
WarSpaz said:
My guess would actually be that they´d send you a usb bluetooth module, as they are dirt cheap in china
I cant promise this ofcourse. Try asking them
Click to expand...
Click to collapse
Ahh that would make sense! Strange I thought this would conflict with the on-board bluetooth
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Same problem...
ajp8868 said:
Hi all,
I've been searching for answers to this issue to no avail so far!
The Bluetooth works flawlessly when it works but after the unit has been off for a few hours and comes back out of sleep or even after a full shutdown, the Bluetooth stops working and looses both its name and passcode
Sometimes takes up to 3 full reboots to get it back
It's got an sd-968 in a px3 unit running Malaysk ROM also with the most recent MCU
It did the same on stock ROM too
Thanks!
Click to expand...
Click to collapse
The same situation with my PX5 Dasaita - very rare, but some times bluetooth looses name and password. Can t find what is the cause...
Regards
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
ikerg said:
AFAIK there is no USB bluetooth module that works with our units...if technical support is going to send you a replacement it will be a full coreboard replacement.
Click to expand...
Click to collapse
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
abagos said:
I have a KBT unit and the same has been happening to me too. Initially the name was "EONON" (the reseller) and passcode something starting with 5. For no apparent reason the name would change to "CAR-KIT" and passcose 1234. The same happened after I upgraded the SoC from a PX3 to a PX5, updating the MCU and firmware (multiple times for reasons unleated to this). After the upgrade it would go back to "EONON" and at some point it would change to "CAR-KIT" again.
Click to expand...
Click to collapse
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
WarSpaz said:
I was reading in some topic about a guy that bought a combined wifi/bt stick that worked both for wifi and bt as long as he selected the right bt module in settings
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Now that sounds good, any chance you remember where?
ajp8868 said:
Pretty much the exact situation but with a slightly different name! Upgraded MCU which didn't help at all. They sent me a new stock ROM to flash which also didn't help so thought I'd try Malaysk's, again no help. I'm wondering if it is a hardware issue or software..
Now that sounds good, any chance you remember where?
Click to expand...
Click to collapse
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
WarSpaz said:
Well, its somewhere here in mtcd diskussion, and i believe in a bluetooth relatwd thread
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
andysabre said:
Hi.
the discussion you search is this:
https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development/bluetooth-loosing-passcode-t3735971/page2#post75257399
The the device COMFAST Bluetooth4.0 + wifi 150 Mbps Wi-Fi Dongle RTL8723BU to the USB input seem to be ok if in the factory setting set the bt as MD725.
I wait one item of this dongle from aliexpress, i hope this will resolve my problem with Bt.
Click to expand...
Click to collapse
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
ajp8868 said:
Hi Andy,
Afraid that link takes me to this page, thank you for the information though, I've ordered one as it's only £5 so worth a try! Let me know how you get on if you get yours first
Click to expand...
Click to collapse
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
andysabre said:
sorry.
here the correct link:
https://forum.xda-developers.com/an...mtce-px5-unit-bluetooth-issues-t3732698/page2
for the dongle i hope will arrive soon.
bye
Click to expand...
Click to collapse
Perfect thanks, good luck with yours!
Deleted
Hello, i have the same problem with the same bt chip.
SD-968 on Eonon navigation. Last summer it was working ok if i remember correctly when i was on stock rom, but then i changed to malasyk and hal9k, and i have problems.
I checked the factory settings and i have SD-968 option on BT. I even dissasembled the navigation to physically check if i have SD-968 and its there!
If i put the navi to autosleep, almost never wakes up with BT available. Always no name and no password with no luck of writing them back. The only solution is to reset the navi once, maybe twice.
I tried to put it on auto off after 30mins, so it will do a full bootup, and maybe 5 times out of 10, it works.
Maybe is has something to do with the cold? i tried the navi on my table in the house and it was a perfect 10/10 at bootup.
Hello. I'm hoping to keep my unit as up to date as possible and wanted to ask if there any files compatible with my unit, and if possible, change the look of the ui too, because it looks super bland to me compared some of the ones I've seen online. I've only updated the firmware once when my seller gave me a file to fix the time issue I had when I first got the unit.
I currently have a Seicane unit for my accord 05.
The reason I'd like to update the mcu is in hopes that may be it'll help with displaying my climate controls. Maybe I'm off with that, but I'm still not able to figure out how to make it display on my screen.
I'm honestly sorry if this has been asked before, I just got overwhelmed with searching on my own in android auto, so I figured I'd ask directly.
Thank you guys.
What factory/mcu do you have. From that you can then decide options.
marchnz said:
What factory/mcu do you have. From that you can then decide options.
Click to expand...
Click to collapse
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
chewybits95 said:
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Click to expand...
Click to collapse
snailium said:
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
Click to expand...
Click to collapse
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
themissionimpossible said:
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
Click to expand...
Click to collapse
Hello to everybody.
I've the same device from Seicane. for my Renault Koleos bought 2 months ago in Aliexpress. It came with version 3.30. The information of my device is
- Compilation rk3368
- Kernel 4.4.167 #176 Fri Nov 22 09:34
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
- CPU Octa Core Cortex A53 1.5G
- Android 9. Screen resolution 1024*768. 9 " Screen
- Memory 3940 Mb
I've problems with microphone ( nobody can hear me when calling). I'm looking for an update. Does anyone can confirm if I can install one of the mod firmwares? I guess this should be compatible with PX5 firmwares, but I'm not 100% sure. Does anybody else has this problem with the microphone?
I haven't found any information in Seicane website. Their support is a disaster....
Punisher66 said:
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
Click to expand...
Click to collapse
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
themissionimpossible said:
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
Click to expand...
Click to collapse
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test miccrophones). I'll try with external one.
Thank you again.
Hi.
Anyone know, or can you tell me who is the HF manufacturer?
The seller is Secaine, but he does not offer any information, nor does he provide any type of file for updating his devices.: eek:
Punisher66 said:
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test microphones). I'll try with external one.
Thank you again.
Click to expand...
Click to collapse
I've tried eternal mic via jack connector and I installed the update. Nothing changed. Nobody can hear me in Bluetooth calls and if I record the sound of the microphone, nothing appears.
I've entered in factory settings and I've seen I have Bluetooth device SD-BC6. I didn't found any option to increase the volume of the microphone. I'm installing programs to access to engineering mode ( I hope I could change the volume of the mic).
In parallel, I've bought in aliexpress an USB microphone, in order to have other input source. Let's see. If none of those test work, I'm thinking on install other firmware like hal9k and root my device.
I don't know what else to do.....
Any idea?
Punisher66 said:
if I record the sound of the microphone, nothing appears.
Click to expand...
Click to collapse
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
themissionimpossible said:
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
Click to expand...
Click to collapse
My guess is that mic volume is lowered to 0 I don't know why, since 2 independent microphones give the same result.
In other android 'phones' I entered in engineering mode and I was able to change this. This is the main option I'm looking for.
In parallel, a USB microphone (I'm waiting for it) would be a different sound source to try with ..... We will see which works
Did you factory reset the head unit?
After a factory reset the mic level should be reset as well.
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MRA58K
ro.build.display.id=YT9218_00005_V004
ro.build.version.incremental=1569378556
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=8.1Go
ro.build.version.security_patch=2017-11-05
jamal2367 said:
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Click to expand...
Click to collapse
Seicane was the one who give me this directly and said it was Android version 10. I haven't tried it myself because my radio is working smoothly right now. If it's not Android 10 I do apologise as I was told that is the version. I wouldn't lie about this because I have gotten so much from this forum and want to give back. As I said, seicane claim this is Android 10 version. I have the conversation to prove this if needed.
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
acvaristul said:
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
Click to expand...
Click to collapse
I honestly didn't pay any attention to the file name. I did mention it to seicane support team that this isn't Android 10 version. They are supposed to be looking into it and sending the correct version soon. I did notice that the specs on my unit is
AllWinner
Quad-Core T3 P1
Board: exdroid
GPU:Mali-400 MP
API:29
I found these online and I am running them on my Seicane PX5.
https://mega.nz/folder/C6Iz0AZC#4vU2rue99881X9MxDxz_YA
---------- Post added at 08:30 AM ---------- Previous post was at 08:29 AM ----------
This also has a new version of Zlink, which is why I updated
Some photos
Help
Do you really expect to get help without sharing any information about your unit?
lucasjason74 said:
Help
Click to expand...
Click to collapse
Is it an FYT unit - you have to put some work in, why expect others to do the work