Database Info

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

Teclast M30 Tablet General Thread

Post here about this new (aug 2019) tablet....
I was finally able to get android 10 PHH installed on this tablet (model M4P7)..version 221
had to go through alot of crap to get it done...but finally works (and works good...so far)
if anyone wants a guide let me know and I will post the instructions
You can get this tablet for 145$ on aliexpress for the 4gb ram and 128gb internal storage version
Teclast M30 Tablet Full Specification
Processor (Clock): 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53
Memory (RAM): 4GB LPDDR3, 800 MHz
Internal Storage: 128GB, eMMC
Screen (Size & Type): 10.1 Inches
Camera Overview: 5 Megapixels / 2 Megapixels
OS Version: Android 8.0 Oreo OS
Key Features
Brand – Teclast
Model – M30
Device Type – Android Tablet PC
CPU – Deca-Core 2x 2.6 GHz ARM Cortex-A72 4x 2.0 GHz ARM Cortex-A53 4x 1.6 GHz ARM Cortex-A53 CPU Clock
Chipset – MediaTek Helio X27 (MT6797X), 64-bit Processor
GPU – ARM Mali-T880 MP4, 4 Cores, 875 MHz
Camera – 5 Megapixel Rear Camera | 2 Megapixel Front camera
Memory – RAM- 4GB LPDDR3 | ROM- 128GB with TF card slot up to 128GB
Display – Screen size 10.1 inches IPS Screen (2560 x 1600), 10-Point Touch Screen
Battery – Non-Removable 7500mAh Lithium-Polymer with 100-240V 5V 2.5A AC Adapter
SIM Card – Dual Hybrid Nano SIM
Sensors – Light, Accelerometer, Fingerprint
Color – Silver
Operating System – Android 8.0 Oreo OS
Dimensions – 240 mm x 170 mm x 10 mm
Weight – Grams (With Battery)
Port – 1 x Type Cv2.0 USB Port, 3.5 mm headphone jack, SD (TF) card expansion, Power Off/On, Speaker
More Features – Plastic and Aluminium Alloy Body, Dual Speakers, Bluetooth, LTE Cat 6, HSPA+, EV-DO Rev.A, Dual GPS, Wi-Fi, Capacitive IPS Display, Dual Camera, TF Slot, Quick Charging, Sweet Sound Dual Bottom Speaker, MIC, Type-C USB, Earphone Jack, Eye Care Mode, Reading Mode.
heres the firmware for the teclast tablets
https://docs.google.com/spreadsheet...ciediKQ3-_NW6zAda9xTNdbyqE/edit#gid=794945847
heres the option for installing android 9 or 10 on the m30...however I'm told it ONLY works on the M4P7 model
https://github.com/phhusson/treble_experimentations/wiki/Teclast-M30
heres a post about MTK chipset devices and a program to read information from them
https://4pda.ru/forum/index.php?showtopic=813767&st=0#Spoil-60035994-23
heres a video on how to use it
https://www.youtube.com/watch?v=pj4iFakq33M
if anyone needs SP FLASH TOOLS
https://spflashtools.com/windows/sp-flash-tool-v5-2020

Well, glad to see that this brand isn't dead.

Would you please " EXTRACT THE FIRMWARE ON THE M30". Thanks

KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.

Is there twrp for this device
([emoji3590]09-09-18[emoji3590])

PoochyX said:
Is there twrp for this device
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Not yet.

XX7u said:
KimLe: could you link a howto that describes the firmware extraction process under Linux? Of course I googled for it but I can't find straightforward information on this.
Click to expand...
Click to collapse
You should ask TechGuru123.

https://pan.baidu.com/s/1UPd0JVu1HRKnvQccWpbREw
heres the current firmware
if you want to get firmwares in the future
go here
http://www.teclast.com/tools/pad/pad.php?t=p and enter M4P7 for the device ID
password for baidu as of the time of this post is "jotg"

This Baidu link is dead.
Who's got a working download link for this Teclast M30 stock firmware.
:good:

I managed to get the firmware/rar package from BAIDU if anyone wants it
https://gofile.io/?c=yZyPnD

anyone working on this?

I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.

m30
KimLe said:
I manage to root it by extract Boot.img , use MaGisk manager to create Magisk_patched.img and flash it with SP-Flash-tools.
Click to expand...
Click to collapse
post it up for people:highfive:

TechGuru123 said:
post it up for people:highfive:
Click to expand...
Click to collapse
I sold my tablet so I can't take any picture.
But you can follow the instructions here.
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376

The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?

gray1919 said:
The firmware version from Baidu is 1.02, but the tablet has 1.03. Is it safe to flash Magisk_patched.img from 1.02 firmware to the 1.03 tablet?
Click to expand...
Click to collapse
Yeah you should be alright.... I patched Kernals from one baseband to another baseband
([emoji3590]09-09-18[emoji3590])

zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1

TechGuru123 said:
zappa55 has made a rooted boot.img for anyone who wants it
https://gofile.io/?c=ggUvb1
Click to expand...
Click to collapse
So, I can flash this directly with SPFlash tool right or any other way? Have u tried?
But, how can I get a scatter file for SPFlash tool?

Reykawick said:
But, how can I get a scatter file for SPFlash tool?
Click to expand...
Click to collapse
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.

gray1919 said:
Scatter file you can get in the firmware from the first page. But I'm not sure enough if it can be used in case the firmware versions are different.
Click to expand...
Click to collapse
It's OK to use the scatter file from firmware v1.02.
Works perfectly. After you have installed the new, patched boot.img - just restart the tablet and then install Magisk Manager apk.
Your device is now rooted

Download acer liquid z205p official firmware flash file

DOWNLOAD ACER LIQUID Z205P OFFICIAL FIRMWARE FLASH FILE
SPECIFICATION
NETWORK Technology
GSM / HSPA
LAUNCH
Announced February, 2015
Released March, 2015
BODY SIZE
Dimensions 126.5 x 65 x 10.3
Weight
130 g
SIM
Single SIM (Mini-SIM) or Dual SIM (Mini-SIM/Micro-SIM, dual stand-by)
DISPLAY Type
TFT capacitive touchscreen, Color Display
Size
4.0 inches, 45.5 cm2 (~55.6% screen-to-body ratio)
Resolution
480 x 800 pixels, 5:3 ratio (~233 ppi density)
Protection
Unspecified
PLATFORM OS
Android 4.4.2(KitKat)
Chipset
MediaTek MT6572M
CPU
Dual Core, 1.0GHz, ARM Cortex A7
GPU
ARM Mali-400 MP
MEMORY
Card slot microSD, up to 32GB (dedicated slot)
Internal 4GB 512MB RAM
MAIN CAMERA
Single 2 MP
Features
flash, panorama
Video
Yes
SELFIE CAMERA
No
Features
No
SOUND
Loudspeaker Yes
3.5mm jack Yes
DTS sound
Connectivity
WLAN Wi-Fi 802.11 b/g/n, hotspot
Bluetooth 4.0, A2DP
GPS Yes, with A-GPS
Radio FM radio
USB microUSB 2.0
GPS
Yes, with A-GPS, GLONASS, GALILEO, BDS
NFC
No
Radio
FM radio
USB
2.0, Type-Micro Usb
FEATURES
Accelerometer
BATTERY
Removable Li-Ion 1300 mAh battery
Charging
Fast battery charging
No
Colors
Titanium Black, Essential White, Fragrant Pink, Sky Blue, Sunshine Yellow
Other Models
Liquid Z6 Plus, Acer Liquid Z200, Acer Liquid Z6E, Acer Liquid Z6 Max, Acer Liquid Z2 Dual,
Acer Acer Liquid S1, Acer Liquid S100, Acer Liquid E1 Duo V360, Acer Liquid E Plus
MOD Edit - Removed
How To Flash Acer Liquid Z205 with SP Flash Tool
In this tutorial you will learn how to upgrade or downgrade or reinstall your Firmware on
Acer Liquid Z205 with SP Flash Tool software.
The first thing is that you must download the official firmware file and here you have the instruction
and of course you must download the SP Flash Tool software, MediaTek Driver and here is how to do it.
No1. download Acer Liquid Z205 official firmware, MediaTek Driver and SP Flash Tool,
No2. Extract Sp FlashTool and your acer liquid z205p firmware package to different folder.
No3. Go to SP FlashTool folder and Open SP Flashtool.exe as Administrator.
No4. Click on Scatter-loading, browse and go to the firmware folder,
Then select scatter file from the folder you extracted the downloaded firmware.
(e.g, MT6582_Android_scatter.txt)
No5. Hit download button
No6. Now you can connect your phone power off mode to your computer with a micro USB data cable and wait
No7. until the drivers are installed it now as you can see phone it’s connected
No8. Now The Flashing Process Will Start and and you should wait for a few (5 to 10) minuites.
No9. You See a progress bar will start loading and you should Wait until complete.
No10. A green circle with Ok will popup to indicate the flashing process completion.
No11. Now you can disconnect the device and perform a factory reset before you power on fully.
No.12 Setup your phone and enjoy. All Done

Thread Closed.
Kindly pm with a valid download link to reopen the thread.
Thanks
SacredDeviL666.

Original firmware for an Allwinner H3 TV Box with SV6256P WiFi chip?

I've been searching for days now. I can't seem to find any compatible firmware. The TV Box was marketed to have Android 10.1, 4GB of RAM, 64GB of ROM. False specs tho. The TV Box only ran rooted Android 7.1 and has 16GB of internal storage. Not sure for the RAM, AIDA64 reported 4GB last time I checked. For my use case, I'm fine with that specs. However, after performing a factory reset on it via settings, I can't seem to boot the device anymore. The TV Box is MXQ Pro 4K 5G. It is now stuck on the MBOX boot animation. I've seen firmware online, but not specific to my model. I've seen firmware for the 2.4ghz wifi model only. I've also seen firmware for the 2.4/5ghz model, but for amlogic/rockchip devices and not for Allwinner. I've taken the TV box apart and look for potentially useful information.
Board label: Q44_v4.0_20200602
WiFi: SV6256P TAC2028 13Y11B
RAM: D9PSC (4 chips)
(?): PPT 2016 O PM4 4-11BP
(?): QL 2029
If there's a compatible firmware for this aside from Android, please let me know as well. Thank you!

hi
you must know the chip processor and graphic
may be
H616 processor with mali G31 or an other
H6 processor with mali ...

ch... said:
hi
you must know the chip processor and graphic
may be
H616 processor with mali G31 or an other
H6 processor with mali ...
Click to expand...
Click to collapse
it's in the title

ch... said:
hi
you must know the chip processor and graphic
may be
H616 processor with mali G31 or an other
H6 processor with mali ...
Click to expand...
Click to collapse
H3 with Mali-400

UPDATE:
Sunvell R69 firmware seems to work but with WiFi, RAM, and storage config issue. WiFi does not work as the firmware is not made specifically for the SV6256P WiFi chip. 1GB of RAM and 8GB of ROM only shows up in AIDA64, which by the way is the default configuration for the Sunvell R69. I've checked the board and it has 4 pcs of D9PSC chips, which I believe are 512MB RAM modules. 2GB of RAM should show up. The board also has the KLMAG1JETD-B041 chip, an 16GB eMMC module for ROM. The device boots rooted Android 7.1.2 just fine. I suppose the issue could be solved by tinkering some system files? I just don't know how just yet.
I've seen a newer version of the Sunvell R69 online, which is the Sunvell H3. It has 2GB of RAM and 16GB of ROM. The WiFi chip isn't still a match however. Despite the WiFi issue, I'm still willing to install the firmware. Better to have 2/16GB than 1/GB only. I can't seem to find any working links for a firmware download however and all my searches so far leads to a dead Google Drive link.
Ive found firmware for MXQ 4K 5G with SV6256P, but for Rockchip only. Is it possible to extract the WiFi drivers from that and load it to my rooted TV box? If so, how could I go about it?
Sunvell R69 firmware (see larrywilson's reply)
https:// forum.freaktab. com /forum/tv-player-support/allwinner-tv-players/809586-i-need-rom-for-mxq-pro-4k
MXQ 4K 5G with SV6256P (for Rockchip)
https:// youtu. be/q7eFpK1R-kg

I have same problem... Problem is solved by backup original rom from working box.
Steps that i made is:
-Flash box with this firmware using phoenix suite:
h t t p s:// mega. nz/#!I9oFBISb!8ozfiBuxs7W_pOtr-XnvAzZ_S9xI9GR2Db55AA-03P0
Box boot, but with not working wifi.
-Go and activate developer options and enable usb debugging.Check USB0 device mode enable
-Copy twrp.zip (from archive in link bellow) to flash drive
-Connect phoenix suite to box and press recovery.Box will boot into recovery mode
-Press install update from external and choose twrp.zip (executable only) DO NOT TRY to install, just run it!
-Make full backup of "no-wifi" rom (check all boxes) and save it to external flash drive
-When is done, disconnect flash drive from box and connect to pc. Replace only files ( from backup in link bellow ) to folder in flash drive. DO NOT rename folder!
-Boot box to "no-wifi" rom and connect to phoenix suite, press recovery again.
- From stock recovery load twrp.zip again, point where backup is, mark again all boxes, and choose restore.
- Wait to finish and press reboot when is done. Box will boot to stock firmware with working wi-fi ...
Link to backup with all needed files:
h t t p s:// mega. nz/file/1kd0ATRR#IDU0a8gkdSKsM-Dlh7yE7Z9GT1IsVLje8BBGx4uidvw
Good luck to all!

Here you go I think this will work for you
[ROM][OFFICIAL][7.1] Allwinner Tech H3 MXQ PRO 4K 5G STOCK ROM
MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED) If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you SPECS WITH THE BOX THAT I TESTED: CPU: Allwinner Tech H3 @1.1Ghz RAM...
forum.xda-developers.com

Klein61967 said:
Here you go I think this will work for you
[ROM][OFFICIAL][7.1] Allwinner Tech H3 MXQ PRO 4K 5G STOCK ROM
MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED) If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you SPECS WITH THE BOX THAT I TESTED: CPU: Allwinner Tech H3 @1.1Ghz RAM...
forum.xda-developers.com
Click to expand...
Click to collapse
Where can I download this ROM

Klein61967 said:
Here you go I think this will work for you
[ROM][OFFICIAL][7.1] Allwinner Tech H3 MXQ PRO 4K 5G STOCK ROM
MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED) If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you SPECS WITH THE BOX THAT I TESTED: CPU: Allwinner Tech H3 @1.1Ghz RAM...
forum.xda-developers.com
Click to expand...
Click to collapse
dead link

Не правильная ссылка

woooow123 said:
I have same problem... Problem is solved by backup original rom from working box.
Steps that i made is:
-Flash box with this firmware using phoenix suite:
h t t p s:// mega. nz/#!I9oFBISb!8ozfiBuxs7W_pOtr-XnvAzZ_S9xI9GR2Db55AA-03P0
Box boot, but with not working wifi.
-Go and activate developer options and enable usb debugging.Check USB0 device mode enable
-Copy twrp.zip (from archive in link bellow) to flash drive
-Connect phoenix suite to box and press recovery.Box will boot into recovery mode
-Press install update from external and choose twrp.zip (executable only) DO NOT TRY to install, just run it!
-Make full backup of "no-wifi" rom (check all boxes) and save it to external flash drive
-When is done, disconnect flash drive from box and connect to pc. Replace only files ( from backup in link bellow ) to folder in flash drive. DO NOT rename folder!
-Boot box to "no-wifi" rom and connect to phoenix suite, press recovery again.
- From stock recovery load twrp.zip again, point where backup is, mark again all boxes, and choose restore.
- Wait to finish and press reboot when is done. Box will boot to stock firmware with working wi-fi ...
Link to backup with all needed files:
h t t p s:// mega. nz/file/1kd0ATRR#IDU0a8gkdSKsM-Dlh7yE7Z9GT1IsVLje8BBGx4uidvw
Good luck to all!
Click to expand...
Click to collapse
thanks y for sharing .......

Yes.I need it.

[email protected] said:
Да. Мне это нужно.
Click to expand...
Click to collapse
https://forum.freaktab.com/node/809586?p=815709#post815709 This look

аnswer.

Here is clean rom, no bloatware, no gta skins! Full flashable image via phoenix suite! Tested on MXQ-PRO-5G with sv6256p wifi adapter! Board label: Q44_v4.0_20200602
MEGA

woooow123 said:
Here is clean rom, no bloatware, no gta skins! Full flashable image via phoenix suite! Tested on MXQ-PRO-5G with sv6256p wifi adapter! Board label: Q44_v4.0_20200602
MEGA
Click to expand...
Click to collapse
Thank you! This is the cleanest and the smoothest firmware I tried for this model. Board label Q44_V4.1_20220120. What still bugs me is the wrong Android version (9 when 7), and the fake storage and ram, but I'll stay with this one.

I will try to add sv6256p support in image from sunwell r69. This is the best image for allwinner h3!!!

i need me help
R69-8X4BIT DDR3_V1.0 firmware download
thanks

woooow123 said:
I will try to add sv6256p support in image from sunwell r69. This is the best image for allwinner h3!!!
Click to expand...
Click to collapse
I need help I would like to add a working firmware support for sv6256p for my device, because the firmware is for the ssv6051 chip

Twrp Recovery file for Colorfly g708 tablet

Hello! I have a colorfly g708 tablet with MT6592 processer. Discription of the device is here.
[$65.10] Colorfly G708 Tablet PC 8GB
Features 1. MTK6592 Octa Core Cortex-A7 1.4GHz CPU 2. Android 4.4 operating system 3. Support Bluetooth, WiFi, GPS, single micro SIM, GSM & WCDMA 4. 7.0 inch IPS multi-point capacitive touch screen 5. Integrated Bluetooth V4.0 for wireless data transmission 6. 1280*800 screen...
www.sunsky-online.com
Can anybody upload valid twrp recovery for this device.
I have checked this site(https://4pda.ru/forum/index.php?showtopic=644132&st=80#entry38351916) But it is showing file not found error.
It would be of great help if you find the recovery file.
Thankyou in advance.