Database Info

HELP Dead Yu

can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...

Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply

my ph vibrt bt no display

Is your phone yu5010 or yu5010a

satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
bro my yuphoria is also dead it doesn't even get detected by pc as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 bro help me!!!

satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
Qfil is giving this error do you have any fix ??

arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
i'm dumping YU5010A Emmc once it is done.i don't know if flashing it on SdCard will revive my dead Yuphoria incase it works i will upload it

arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
tried it doesn't boots fastboot with sdcard

smh.saad said:
Qfil is giving this error do you have any fix ??
Click to expand...
Click to collapse
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro

satyabobby09 said:
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro
Click to expand...
Click to collapse
unable to connect to comPort error

smh.saad said:
unable to connect to comPort error
Click to expand...
Click to collapse
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved

satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
did u got COM Port error on windows 10 i got it on windows 8.1 nd 7

satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??

smh.saad said:
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??
Click to expand...
Click to collapse
I had both yu5010A n you 5010CM. I'll give u the link soon(I'm at office. I'll upload or find u the link when I reach home.). I had problem with win 10. And one more thing you should boot in safe mode for unsigned drivers to install

View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543

satyabobby09 said:
View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543
Click to expand...
Click to collapse
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?

ravi2106 said:
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?
Click to expand...
Click to collapse
I have unbricked my device. The process needs to be followed properly

Have u revived u r yuphoria
satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
Satyabobby09;
Can I get u r contact no plz so that I can get details regarding how to revive hard bricked yuphoria

satyabobby09 said:
I have unbricked my device. The process needs to be followed properly
Click to expand...
Click to collapse
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .

ravi2106 said:
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .
Click to expand...
Click to collapse
Yes you need qfil signed ROM n qpst. Also this is msm8916 so use msm8916.mbn
Guys follow this video its in Hindi hope this. Helps you
https://youtu.be/5qnr8bJ2Zso

Moto g 2014 bricked

Sorry if this is in the wrong place. But i really am in a desperate need of help. My moto g2 suddenly turned off during the lollipop update and won't turn on anymore. I have tried to go into fastboot but no suck luck. The screen doesn't even light up when connecting the charger. Please help:crying:

Connect to pc via fastboot mode and flash stock rom
Sent from my AO5510 using Tapatalk
Use the following link for guidance
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
http://www.allfreeperks.in/2015/09/unbrick-how-to-unbrick-and-repair-moto.html?m=1
Sent from my AO5510 using Tapatalk

Cant go into the fastboot mode. Nothing happens when i press and hold the specific buttons.

Kuldeep Singh Rajput said:
Sorry if this is in the wrong place. But i really am in a desperate need of help. My moto g2 suddenly turned off during the lollipop update and won't turn on anymore. I have tried to go into fastboot but no suck luck. The screen doesn't even light up when connecting the charger. Please help:crying:
Click to expand...
Click to collapse
If it powered off during update and it won't boot to any of its modes, won't charge, won't connect to PC and won't respond in any kind of way then it is hardbricked, if that's what happened then your device is dead. You can see if a shop can repair it or get a new device.
Sent from my SCH-I535 using Tapatalk

i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk

Kuldeep Singh Rajput said:
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Click to expand...
Click to collapse
Yes, your device is hard bricked. See your device detect in HS-USB QDLoader 9008 mode. If yes then your Android recover. Try android dbrick tool. I can give you the link of the tool. But I can't post on the XDA. Because it showing trojan infection. I used that tool and I recover my android from same condition. it not harmed my PC or my Android.
Sent from my Lenovo K50a40 using XDA-Developers mobile app

Nope, just detects it as qhsusb_bulk. I tried the method of installing the driver to make it work. But it just keeps giving me digital signature error. Even after disabling the signature verification

Kuldeep Singh Rajput said:
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Click to expand...
Click to collapse
Try this
forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Sent from my SCH-I535 using Tapatalk

Yeah iv'e been trying that method for sometime now. But i just am unable to install the Riff box driver no matter how much i try. it just keeps saying the driver is without and digital signatures. Although i have disabled the signature verification in windows and all that the post suggested exactly as it says. Please help :crying:

Kuldeep Singh Rajput said:
Nope, just detects it as qhsusb_bulk. I tried the method of installing the driver to make it work. But it just keeps giving me digital signature error. Even after disabling the signature verification
Click to expand...
Click to collapse
Try these tutorial and install Qualcomm driver.
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Sent from my Lenovo K50a40 using XDA-Developers mobile app

Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone

Kuldeep Singh Rajput said:
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Click to expand...
Click to collapse
Then do a google search for
"Unbrick qhsusb_bulk Moto G"
That should give you a lot of links to various tools and methods, try them and see if it works for you.
Sent from my SCH-I535 using Tapatalk

Kuldeep Singh Rajput said:
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Click to expand...
Click to collapse
Your Android must show QHS-USB QDLoader 9008 port to begin next process.

It is shown as the bootloader but the tool fails to send the programmer packet to the device:crying:

Kuldeep Singh Rajput said:
It is shown as the bootloader but the tool fails to send the programmer packet to the device:crying:
Click to expand...
Click to collapse
Is your Android detects in 9008 port

It is detected in the port

Kuldeep Singh Rajput said:
It is detected in the port
Click to expand...
Click to collapse
Port is 9008 or 9006

qdloader 9008

Kuldeep Singh Rajput said:
qdloader 9008
Click to expand...
Click to collapse
Then give me your mail ID. I give you the download link of the tool. Earlier I said I can't post link on the XDA forum.

That would be amazing. Here is my email id - [email protected]

my le1s eco is dead....computer is not detecting my phone

due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone

Just install Telegram
And visit
https://t.me/LeecoUnofficial

thank you..but it is not working
asif2017 said:
Install mtk drivers on ur pc ..it will detect
Or whatsapp me +919906673436
Sent from my Letv X500 using Tapatalk
Click to expand...
Click to collapse
the device is not at all detected by the laptop

Try vcom driver mobistel

sam7799 said:
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Click to expand...
Click to collapse
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..

Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]

Shrikantc615 said:
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Click to expand...
Click to collapse
Do you have a backup of your rom you were using before?
If not then try to flash rom using SP flash tool ...for further information you can search on YouTube...?

[email protected]@ said:
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Click to expand...
Click to collapse
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.

mmrtov said:
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
Click to expand...
Click to collapse
Flash stock rom using sptool if it is bricked

santoshhh000 said:
Flash stock rom using sptool if it is bricked
Click to expand...
Click to collapse
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.

mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Use mtkdrivers drivers

Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you

mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Have u tried installing vcom drivers ...? Before installing the rom.....
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
mmrtov said:
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
Click to expand...
Click to collapse
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ here is the step by step process to install drivers. According to your pc version.

Try this method
youtu.be/-KSExDz_78E

Daniyal_sheikh said:
youtu.be/-KSExDz_78E
Click to expand...
Click to collapse
Can you explain ,....,,.,.,......,?

Le 1s suddenly off not detecting sp tool and charging show red light
4 month before when i use leeco le 1s mobile suddenly off and i press power button mobile not on.. Mobile is ****ch off i try to on mobile but doesn't on, when i connect phone charger notifications light is red and not show screen charging or any other change and i also try sp flash tool but not working mujhe lga hardware problem hoga so .. After some day when mobile give local show then his charge me 1800 and mobile is on and fine.. After few hours same problem mobile off red light while charging not detect laptop.. When again i give mobile local show he suggested for mother board change and price is 3000 and i not charging my mobile motherboard sir please help.. Hardware problem or software same ideas any one
---------- Post added at 11:58 AM ---------- Previous post was at 11:55 AM ----------
Please contact me bro and help me.. 7987597172

[SM-G531H][HELP] debrick.img/unbrick.img needed!

Hey can someone get or does anyone have a debrick.img for the Samsung Galaxy Grand Prime (SM-G531H)?

Can someone with a similar device create a unbrick image with the Unbrick Image Creator please?
It's really easy... I'm begging.. my phone is hard bricked and this is my only hope of reviving it!!

Btw.. it's the Android 5.1 not Jellybean

Mate does the phone boot or is it detected by the pc as QuelComm HS-USB 9005 ?

-Hope- said:
Mate does the phone boot or is it detected by the pc as QuelComm HS-USB 9005 ?
Click to expand...
Click to collapse
The phone doesn't boot at all, no recovery, no download mode, no logo.. what should I do if the phone is detected as the Qualcomm driver?

-Hope- said:
Mate does the phone boot or is it detected by the pc as QuelComm HS-USB 9005 ?
Click to expand...
Click to collapse
Doesn't the memory card method with the unbrick.img apply to this also? I'm a noob so I'm just trynna learn what I can

Alando123 said:
Doesn't the memory card method with the unbrick.img apply to this also? I'm a noob so I'm just trynna learn what I can
Click to expand...
Click to collapse
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?

-Hope- said:
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
Click to expand...
Click to collapse
A friend tried to flash something on it with frp on

-Hope- said:
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
Click to expand...
Click to collapse
Hence, the hard bricked device

-Hope- said:
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
Click to expand...
Click to collapse
The battery ain't the problem.. I swapped from other phones to see also.. I read that u can use the unbrick.img method, the JIG method and something about it showing up as the Qualcomm driver

Alando123 said:
A friend tried to flash something on it with frp on
Click to expand...
Click to collapse
Flashing through Odin may not brick the device, unless something went wrong like: bad cable, cable removal, battery off
And the frp lock is just a security feature to keep your device from being stolen.
Flashing a stock ROM will fix that
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
Are you sure this is not a MTK Device (Clone) ?

-Hope- said:
Flashing through Odin may not brick the device, unless something went wrong like: bad cable, cable removal, battery off
And the frp lock is just a security feature to keep your device from being stolen.
Flashing a stock ROM will fix that
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
Are you sure this is not a MTK Device (Clone) ?
Click to expand...
Click to collapse
Absolutely possitive it's not an MTK Clone as Odin detected it and it had download mode

Alando123 said:
Absolutely possitive it's not an MTK Clone as Odin detected it and it had download mode
Click to expand...
Click to collapse
Connect it to pc and capture the drivers manager

-Hope- said:
Connect it to pc and capture the drivers manager
Click to expand...
Click to collapse
I don't have the device in me right now.. as soon I get it back. I'll show u

Hey, my Samsung Galaxy Grand Prime is the Value Edition with the Spreadtrum SC7730 processor (not the Qualcomm Snapdragon 410 processor that comes with the standard Samsung Galaxy Grand Prime).

Alando123 said:
Hey, my Samsung Galaxy Grand Prime is the Value Edition with the Spreadtrum SC7730 processor (not the Qualcomm Snapdragon 410 processor that comes with the standard Samsung Galaxy Grand Prime).
Click to expand...
Click to collapse
Hello i'm sad to say that the device maybe died
but i would try to charge it to see if it atleast boots to download mode
I wonder what your friend do to it anyway i hope you gave us all the info you know

Question Stucked in EDL mode

Hello guys ,
I was trying to fix my rog 5 using EDL mode but unfortunately i flashed wrong files using QPST now my rog 5 is stucked in EDL mode and when i try to flash again tusing QPST it says that my phone is disconnected or not stable connection and i cannot get out from EDL using buttons :')
Can any one help me please
Thank you guys

Steve.95 said:
Hello guys ,
I was trying to fix my rog 5 using EDL mode but unfortunately i flashed wrong files using QPST now my rog 5 is stucked in EDL mode and when i try to flash again tusing QPST it says that my phone is disconnected or not stable connection and i cannot get out from EDL using buttons :')
Can any one help me please
Thank you guys
Click to expand...
Click to collapse
How did you get into EDL mode? Did you need one of them deep flash cords?

Kush90 said:
How did you get into EDL mode? Did you need one of them deep flash cords?
Click to expand...
Click to collapse
I'm trying to fix my rog 5s it's soft bricked

Bro some phones can't get into EDL
Others can get into EDL using cmd "reboot-edl" you can try it while the phone is in developer mode and usb debugging enabled

I know this I was just asking how you got into it

Like i told you using cmd bro and flashed wrong files using QPST now stuck in EDL and nothing is happening