Hey can someone get or does anyone have a debrick.img for the Samsung Galaxy Grand Prime (SM-G531H)?
Can someone with a similar device create a unbrick image with the Unbrick Image Creator please?
It's really easy... I'm begging.. my phone is hard bricked and this is my only hope of reviving it!!
Btw.. it's the Android 5.1 not Jellybean
Mate does the phone boot or is it detected by the pc as QuelComm HS-USB 9005 ?
-Hope- said:
Mate does the phone boot or is it detected by the pc as QuelComm HS-USB 9005 ?
Click to expand...
Click to collapse
The phone doesn't boot at all, no recovery, no download mode, no logo.. what should I do if the phone is detected as the Qualcomm driver?
-Hope- said:
Mate does the phone boot or is it detected by the pc as QuelComm HS-USB 9005 ?
Click to expand...
Click to collapse
Doesn't the memory card method with the unbrick.img apply to this also? I'm a noob so I'm just trynna learn what I can
Alando123 said:
Doesn't the memory card method with the unbrick.img apply to this also? I'm a noob so I'm just trynna learn what I can
Click to expand...
Click to collapse
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
-Hope- said:
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
Click to expand...
Click to collapse
A friend tried to flash something on it with frp on
-Hope- said:
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
Click to expand...
Click to collapse
Hence, the hard bricked device
-Hope- said:
what did you do so that it happened ??
by the way have you tried taking out the battery and putting it back in ?
or tried another one also ?
Click to expand...
Click to collapse
The battery ain't the problem.. I swapped from other phones to see also.. I read that u can use the unbrick.img method, the JIG method and something about it showing up as the Qualcomm driver
Alando123 said:
A friend tried to flash something on it with frp on
Click to expand...
Click to collapse
Flashing through Odin may not brick the device, unless something went wrong like: bad cable, cable removal, battery off
And the frp lock is just a security feature to keep your device from being stolen.
Flashing a stock ROM will fix that
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
Are you sure this is not a MTK Device (Clone) ?
-Hope- said:
Flashing through Odin may not brick the device, unless something went wrong like: bad cable, cable removal, battery off
And the frp lock is just a security feature to keep your device from being stolen.
Flashing a stock ROM will fix that
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
Are you sure this is not a MTK Device (Clone) ?
Click to expand...
Click to collapse
Absolutely possitive it's not an MTK Clone as Odin detected it and it had download mode
Alando123 said:
Absolutely possitive it's not an MTK Clone as Odin detected it and it had download mode
Click to expand...
Click to collapse
Connect it to pc and capture the drivers manager
-Hope- said:
Connect it to pc and capture the drivers manager
Click to expand...
Click to collapse
I don't have the device in me right now.. as soon I get it back. I'll show u
Hey, my Samsung Galaxy Grand Prime is the Value Edition with the Spreadtrum SC7730 processor (not the Qualcomm Snapdragon 410 processor that comes with the standard Samsung Galaxy Grand Prime).
Alando123 said:
Hey, my Samsung Galaxy Grand Prime is the Value Edition with the Spreadtrum SC7730 processor (not the Qualcomm Snapdragon 410 processor that comes with the standard Samsung Galaxy Grand Prime).
Click to expand...
Click to collapse
Hello i'm sad to say that the device maybe died
but i would try to charge it to see if it atleast boots to download mode
I wonder what your friend do to it anyway i hope you gave us all the info you know
Related
Hi all,
Anyone have info about how to access factorymode or preloader in OnePlus One?
The Oppo's vol+up way doesn't work!
Maybe the original flash tool and drivers by any chance?
I'm making a preparations to help revive hardbricked phones, is case one have a partitions full dump of cause!
I tried to ask the official forum - but it's totally lame! They even don't understand what is a bootloader and a preloader...
MarvinFS said:
Hi all,
Anyone have info about how to access factorymode or preloader in OnePlus One?
The Oppo's vol+up way doesn't work!
Maybe the original flash tool and drivers by any chance?
I'm making a preparations to help revive hardbricked phones, is case one have a partitions full dump of cause!
I tried to ask the official forum - but it's totally lame! They even don't understand what is a bootloader and a preloader...
Click to expand...
Click to collapse
Why not contact the CM team?
donalgodon said:
Why not contact the CM team?
Click to expand...
Click to collapse
Would you be so kind to point the correct way to contact 'em on that particular matter?
MarvinFS said:
Hi all,
Anyone have info about how to access factorymode or preloader in OnePlus One?
The Oppo's vol+up way doesn't work!
Maybe the original flash tool and drivers by any chance?
I'm making a preparations to help revive hardbricked phones, is case one have a partitions full dump of cause!
I tried to ask the official forum - but it's totally lame! They even don't understand what is a bootloader and a preloader...
Click to expand...
Click to collapse
Yes i know, its like by LG's, while pushing vol + and vol - just plug the usb cable, but thats where im stuck too. We need the right drivers for that, find 5's drivers wont work, tired already. As you know without right diag drivers, we cant go to next level, hope youll help here
os_man said:
Yes i know, its like by LG's, while pushing vol + and vol - just plug the usb cable, but thats where im stuck too. We need the right drivers for that, find 5's drivers wont work, tired already. As you know without right diag drivers, we cant go to next level, hope youll help here
Click to expand...
Click to collapse
Actually we do have drivers, in a preloader mode the device is detected as
Qualcomm HS-USB Diagnostics 9008
the drivers are here
https://yadi.sk/d/Um0Nk1FIWR6vK
or here
https://yadi.sk/d/5XdeaZFvMBpQ6
but QPST is not working - MDM port is not opened! One guru from our Russian forums found a way to open MDM port, but for ZTE Nubia phones... and it's not working with OnePlus. Needs further research!
Actually all Qualcomm based devices must be somewhat similar in terms of low level flashing!
MarvinFS said:
Actually we do have drivers, in a preloader mode the device is detected as
Qualcomm HS-USB Diagnostics 9008
the drivers are here
https://yadi.sk/d/Um0Nk1FIWR6vK
or here
https://yadi.sk/d/5XdeaZFvMBpQ6
but QPST is not working - MDM port is not opened! One guru from our Russian forums found a way to open MDM port, but for ZTE Nubia phones... and it's not working with OnePlus. Needs further research!
Actually all Qualcomm based devices must be somewhat similar in terms of low level flashing!
Click to expand...
Click to collapse
About ZTE Nubia phones you can ask me everything, i can even write imei to them, ZTE GRAND S II too, and no, they are different. QPST is not working becouse cant connect to the phone in download mode ( sees in download mode ). I will try these drivers now too, if it sees as "HS-USB Diagnostics 9008" might be ok, becouse normaly its HS-USB QDloader 9008 without right driver, if i manualy turn it to 9006, qpst can connect, but this mode is for bricked phones i think ( as in oppo finf 5, in this mode oppo's own service program can write to phone.)
---------- Post added at 07:50 PM ---------- Previous post was at 07:37 PM ----------
Sadly no, i had tried these drivers too, its still QDLoader, not Diagnostic port, we need the diag drivers from the Manufacturer i think, not generic from Qualcom, and i must add i believe this mode is not we are looking for, phone must be online for Qpst to be able to make changes, so we need the right dial code for engineer-service menu (or somewhere hidden in *#808#, all in chineese, still trying to figure it out if its there )
---------- Post added at 08:04 PM ---------- Previous post was at 07:50 PM ----------
"I'm making a preparations to help revive hardbricked phones", can be used if phone is bricked maybe, to download all the sytem to the phone again ( as in Oppo Finf 5 same example again ), but i need a working Qpst that actualy connect to phone "online".
---------- Post added at 08:40 PM ---------- Previous post was at 08:04 PM ----------
pm me for further instructions please..
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
till now is no news about that, how? when? where? what? i dont know
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
MadL1fe said:
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
Click to expand...
Click to collapse
bring your phone to services center, your problem will solved but you must pay it
I already tried everything, but it looks like we will have to wait even. there is no any news about a tool I'm sad without my moto G
Sandivisi said:
bring your phone to services center, your problem will solved but you must pay it
Click to expand...
Click to collapse
in my country no motorola service centers
many of us have lost the guarantee of motorola
ST4NL3//Y said:
many of us have lost the guarantee of motorola
Click to expand...
Click to collapse
I will pay what I can, if someone will help restore .Here is a lot of clever people ... that no one can help?
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
no man, the phone doesnt boot into fastboot
and we need blankflash/mbm-ci for new bootloader lollipop to make it work
correct need of blankflash compatible with 5.0
i dont need fastboot.
i upload with a serial line in raw format.
konsolen said:
i dont need fastboot.
i upload with a serial line in raw format.
Click to expand...
Click to collapse
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Sandivisi said:
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Click to expand...
Click to collapse
me was exactly the same
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
come on, help us
---------- Post added at 10:54 PM ---------- Previous post was at 10:47 PM ----------
konsolen said:
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
Click to expand...
Click to collapse
i dont understand what you mean, so what should I do
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
konsolen said:
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
Click to expand...
Click to collapse
yes, it already installed
and for what teamviewer?
i must connect to flash.
same problem with me .I flashed stock rom to downgrade to 4.4.3 from rooted stock lollipop OS because of messing up build.prop file.After that,I have installed OTA update to 4.4.4,then the problem starts no bootloader,no boot,no fastboot,no adb,no recovery and except qhsusb_bulk when connected to PC.After 2 days ,its now showing sometimes as usb input device ,with LED light blinking.Not sure if there is solutuion for this.pls help if anyone found the solution
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
does download mode works @sarry86
mohsin931 said:
does download mode works @sarry86
Click to expand...
Click to collapse
Yes it does but stays for 3 or 4 seconds then it restarts
sarry86 said:
Yes it does but stays for 3 or 4 seconds then it restarts
Click to expand...
Click to collapse
flashing does not work in recovery?
mohsin931 said:
flashing does not work in recovery?
Click to expand...
Click to collapse
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
sarry86 said:
Only factory data reset work but it doesn't change anything, i wish i could just make it detected on pc, just that for now
Click to expand...
Click to collapse
how did it happened?
mohsin931 said:
how did it happened?
Click to expand...
Click to collapse
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
sarry86 said:
He received an ota update then all of a sudden a phone went off and it went to a constant bootloop till now
Click to expand...
Click to collapse
it is hardbrick remove battery and connect to computer and tell me is it detected
mohsin931 said:
it is hardbrick remove battery and connect to computer and tell me is it detected
Click to expand...
Click to collapse
No nothing even in device manager
sarry86 said:
No nothing even in device manager
Click to expand...
Click to collapse
usb is not recognized did you got this message?
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
Nothing but sometimes i get the message "USB only charge interface"
mohsin931 said:
usb is not recognized did you got this message?
Click to expand...
Click to collapse
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
mohsin931 said:
same method ashttps://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/ can be folowed to unbrick your phonebut first it needed to be dtected as Qualcom 9006 which require opening the phone and shortening specific pins
Click to expand...
Click to collapse
Thanks bro i will try tomorrow and will let you know
If u still face the problem toss a new battery and check it ....or grab a old Nokia battery or which ever battery fits positive and negative connection in the phone. If the phone turns on its your BATTERY...ORIGINAL G PRO 2 BATTERY COSTS AROUND 180$ DO NOT BUY CHINESE KNOCK OFF......INFORMATION IS MEDICINE :good:
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
sarry86 said:
My brother's Lg G pro 2 F350s doesn't want to boot, boots to lg logo then it restarts, I even am unable to do anything on pc as it doesn't even get detected on my pc, please help only recovery works but gives me options to wipe data when i wipe nothing happens, could someone help a stuck guy here? :crying:
Click to expand...
Click to collapse
It's the battery problem even if the battery looks good toss a new one and check before doing all this stuffs
sarry86 said:
Thanks bro i will try tomorrow and will let you know
Click to expand...
Click to collapse
hello bro the problem u have now is u have custom recovery installed on your phone and u received ota update and the phone try to install the ota update so after that your phone cant boot ur phone the phone is bootloop . if that is the problem u have to install twrp recovery and go to terminal type this code dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota then after that reboot your phone. If i help u dont forget the thanks bottom :good:
Hi everyone, I am a new person in the forums, so please understand if I'm not good at some stuff and if I'm posting this in the wrong place
Well, story is that I found my old Galaxy Tab 2 in my basement after 3 years, and I got it to turn on (no factory cable, 1€ chinese cable). Android version is 4.0.3.
Found a couple of roms in the forums for 6.0, and yes, I've done it before on my phones.
Computer cannot recognize the tab, only says "Unrecognized device", even though I've tried every driver there is to it. Tried kies, no help. Tried odin, no help.
Neither of those detect the tab either, so I rooted it from the tab itself with KingRoot.
Now the tab is rooted, and I tried to flash TWRP to install 6.0.
It says that the recovery is flashed, but when I try to reboot to recovery, it only restarts, with nothing.
It goes into download mode just perfectly, but when connected to the pc, it still doesn't detect it.
I do not have money to buy a new tablet, so I would really like some advice.
Thanks!
hello
go in download mod ( power & vol+ )
go back to origin
use cfautoroot (all needed in it odin + drivers + cfautoroot)
use a new cable
after that install twrp, os ( first cm12.1 )
regards
Hi, will try!
Don't set auto reboot in Odin.
Once TWRP is flashed wait 1 minute and unplug the tab.
Now directly boot into TWRP, else stock recovery get restored on boot.
You should update over OTA to 4.1 or 4.2 if available first, else you'll have to flash a newer bootloader using Odin to avoid graphics glitches at boot.
Android-Andi said:
Don't set auto reboot in Odin.
Once TWRP is flashed wait 1 minute and unplug the tab.
Now directly boot into TWRP, else stock recovery get restored on boot.
You should update over OTA to 4.1 or 4.2 if available first, else you'll have to flash a newer bootloader using Odin to avoid graphics glitches at boot.
Click to expand...
Click to collapse
Hi, thanks! Got it working!
It was a very good idea to ask xda for help
Can you tell me how you did it? Where to get origin? I have the same problem - please help.
dionex2k said:
Can you tell me how you did it? Where to get origin? I have the same problem - please help.
Click to expand...
Click to collapse
Read above, lol, he quoted it too
I did.... my computer does not even recognize my tab - I tried 3 different cables and 2 different computers.
Use the driver from here http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Android-Andi said:
Use the driver from here http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Click to expand...
Click to collapse
I installed the drivers from the link you provided - my laptop still does not recognize my tablet... any other suggestions?
dionex2k said:
I installed the drivers from the link you provided - my laptop still does not recognize my tablet... any other suggestions?
Click to expand...
Click to collapse
Tired a different cable? Different usb port?
dionex2k said:
I installed the drivers from the link you provided - my laptop still does not recognize my tablet... any other suggestions?
Click to expand...
Click to collapse
I have heard about a tool called "Forget Windows Use Linux (FWUL)" but I have not tried it. Maybe give it a shot
hello
cfautoroute gives odin, drivers, ...
regards
dionex2k said:
I installed the drivers from the link you provided - my laptop still does not recognize my tablet... any other suggestions?
Click to expand...
Click to collapse
Is your cable a data cable or just a charging cable?
UnavailableSurm said:
Is your cable a data cable or just a charging cable?
Click to expand...
Click to collapse
Yes I tried 3 cables they are for data and charging
---------- Post added at 06:55 PM ---------- Previous post was at 06:53 PM ----------
validatus said:
hello
cfautoroute gives odin, drivers, ...
regards
Click to expand...
Click to collapse
I tried that - did not work.
---------- Post added at 06:55 PM ---------- Previous post was at 06:55 PM ----------
Can someone try and help me via teamviewer? It would make me happy because I really want to use this damn tablet again.
Hello,
I finaly found out a method how to establish USB-Connection with a "dead" honor 9 (wasn't recognized by computer/didn't turn on/just nothing).
WARNING!! YOUR warranty will be lost IF YOU OPEN HONOR 9!, no guarantee you get anything fixed/Maybe you break more!!
So I show you how I did it:
1: Open the Honor 9 Back: Tutorialvideo (not made by me)
https://www.youtube.com/watch?v=SUI5sA99nDw
- I used Hair Dryer + Knife to open the back. But use the tools in this video if you have.
2: - Install right USB-Drivers.: I needet the drivers "ASC-Driver_Handset WinDriver 2.01.00.00.exe" - You can find them in google!
3. - Connect the 2 Test Points like in my images. I used the SIM-Card tool from the phone to do it.
4. - Connect phone via USB - if everything gone right it shows up in the device manager as "HUAWEI USB COM 1.0"
5. - NOW We need an app or method to flash FirmWare in this mode... actually not supported by DC-Phoenix.... If any solution I edit in the thread.
6. UPDATE UPDATE! PHONE GOT REVIVED READ SECOND POST!
UPDATE UPDATE !
- HONOR 9 REVIVED FROM THE DEAD
- Downloaded DC-PHOENIX (dc-unlocker.com) ->Made Account/Charged Credits
- Connect the Phone via Testpoints, than open DC-Phoenix APP
- Flashed ( Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB ) ->You can find it in DC-Phoenix search.
-> Phone got revived. (NO MORE Huaway boot animation - I got strange red and green colors instead)
-> Open H9 in Fastboot mode (Turn phone off than: VOL+Down + USB CABLE PUT IN)
-> OPEN DC-PHOENIX
-> FLASHED "Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Netherlands_Portugal_Switzerland_Spain_Italy_Austria_Poland_Denmark_Finland_Czech_Republic_Hungary.APP" with DC-Phoenix.
[UPDATE 2}
- You have to restore IMEI/SN/CARRIER AND COUNTRY AFTER UPDATING (empty board) with HCU Client - (You can find the software on dc-unlocker.com)
- THAN INSERT SIM CARD TO GET OFFICIAL OTA UPDATES.
-> 100% back to stock with full OTA, everything working, boot animation also back
What could be the reason of those death ? planned obsolescence ? Virus ? just HW problem / quality ? no luck ? ........
sonneper said:
What could be the reason of those death ? planned obsolescence ? Virus ? just HW problem / quality ? no luck ? ........
Click to expand...
Click to collapse
Failure in playing and experimenting with the Software.
ok , nevermind, you manage it ! good play : ) !
yz8_1337 said:
Do you also think this works with mine which bootloops after downgrading from Oreo to Nougat?
Click to expand...
Click to collapse
This should work with all damaged Smarpthones but I also think there are better and much softer techniques to revive looping or software side errors where the phone still turns on.
Maybe try via fastboot mode? But no OT please there are enough threads for it bro.
Revive via testpoints should always be the last option to revive a phone.
I tried this and doesnt work for me, it doesnt even show up as unknown device in device manager.
does anyone know why or is my phone completely dead?
SusKuN1337 said:
I tried this and doesnt work for me, it doesnt even show up as unknown device in device manager.
does anyone know why or is my phone completely dead?
Click to expand...
Click to collapse
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
4r44444 said:
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
Click to expand...
Click to collapse
i got told yesterday that the motherboard is broken, so, rest in peace honor 9 :<
I updated my phone with HuRUpdater and no my phone won't turn on. I wanted to locate the ASC-Driver_Handset WinDriver 2.01.00.00.exe, but all of the links are false download links. Can someone point me to a valid link for the driver? Thanks!
Rapid81 said:
I updated my phone with HuRUpdater and no my phone won't turn on
Click to expand...
Click to collapse
Did you save your recovery.log in TWRP after you flashed with HuRUpdater ?
Update from Build to which build ?
On which cust region ?
Rapid81 said:
I wanted to locate the ASC-Driver_Handset WinDriver 2.01.00.00.exe, but all of the links are false download links. Can someone point me to a valid link for the driver? Thanks!
Click to expand...
Click to collapse
Here is ASC-Driver_Handset WinDriver 2.01.02.00.exe :
HUAWEI DRIVER HANDSET PRODUCTLINE 2.01.02.00
https://androidhost.ru/6rf
Please tell us back your experience flashing board software.
oslo83 said:
Did you save your recovery.log in TWRP after you flashed with HuRUpdater ?
Update from Build to which build ?
On which cust region ?
Here is ASC-Driver_Handset WinDriver 2.01.02.00.exe :
HUAWEI DRIVER HANDSET PRODUCTLINE 2.01.02.00
https://androidhost.ru/6rf
Please tell us back your experience flashing board software.
Click to expand...
Click to collapse
No, I did not saved the log. The update went well, no error or any difference. I updated my phone with HuRUpdater several times without problem.
I updated to STF-L09C432B376, but I had problems with that firmware and I went back to B371, as I did before, when I had issues with B374 as well.
Everything went well, and after B371, I installed Magisk v17, like always, pressed the reboot button and since that, the phone won't turn on.
Thanks for the link!
@Rapid81
As you're stating that after installing the driver, the WIndows sees the phone as "HUAWEI USB COM 1.0" :
So you're good to go, then no need for you to open up your device loonking for test points
---------- Post added at 16:28 ---------- Previous post was at 16:19 ----------
Let's chat via PM as I think I have some tools to replace DC-Phoenix tools which is a license-only. I'd like you to test.
I also liled to know how you managed to get COM1 without openphone and connecting testpoints...
oslo83 said:
@Rapid81
As you're stating that after installing the driver, the WIndows sees the phone as "HUAWEI USB COM 1.0" :
So you're good to go, then no need for you to open up your device loonking for test points
---------- Post added at 16:28 ---------- Previous post was at 16:19 ----------
Let's chat via PM as I think I have some tools to replace DC-Phoenix tools which is a license-only. I'd like you to test.
I also liled to know how you managed to get COM1 without openphone and connecting testpoints...
Click to expand...
Click to collapse
I just installed the mentioned driver, connected the phone and the "HUAWEI USB COM 1.0" showed up.
I wrote back to you.
DC-Phoenix give me an error when writing bootloader. I have a brick now.
Rapid81 said:
DC-Phoenix give me an error when writing bootloader. I have a brick now.
Click to expand...
Click to collapse
Have you tried to physically connect test point?
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
4r44444 said:
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
Click to expand...
Click to collapse
Flashed ( Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB ) ->You can find it in DC-Phoenix search.
What's it mean? Use what to Flash?
Ccboxes said:
Have you tried to physically connect test point?
Click to expand...
Click to collapse
Yes, several times, with method was 100% worked. The main board died.
Rapid81 is getting its bricked STF honor9 seen as COM3 by windows.
He said he changed it in windows settings to COM1.
But both times it didn't worked with DC-Phoenix or IDT...
Maybe he did not managed something...
oslo83 said:
Rapid81 is getting its bricked STF honor9 seen as COM3 by windows.
He said he changed it in windows settings to COM1.
But both times it didn't worked with DC-Phoenix or IDT...
Maybe he did not managed something...
Click to expand...
Click to collapse
Could you give the IDT and frimware to me？I want to try before DC.
Ccboxes said:
Could you give the IDT and frimware to me？I want to try before DC.
Click to expand...
Click to collapse
IDT 2.0.0.9
https://bi-t.xyz/ozS5cy2kTm
---------- Post added at 06:40 ---------- Previous post was at 06:34 ----------
IDT shoud work with with original BoardSoftware not repacked like DC-unlocker's .dgtks .