Database Info

USB debugging doesnt work after flashing custom rom

I flashed paranoid custom rom 2.53..but realize wifi didnt work hence i went to clear and reflash 2.50 everything works fine except usb debugging.
Whenever i try usb debugging to my laptop, i see a yellow caution under drivers... and then i tried uninstalling and reconnecting and re enabling the USB debugging under development in my tab 7.7
Could it be i didnt tick usb Debugging mode when flashing the rom??
ANy suggestions?
Side Note: Widgets like google-my library also not working. It shows a grey big icon thats all..

LFTI said:
I flashed paranoid custom rom 2.53..but realize wifi didnt work hence i went to clear and reflash 2.50 everything works fine except usb debugging.
Whenever i try usb debugging to my laptop, i see a yellow caution under drivers... and then i tried uninstalling and reconnecting and re enabling the USB debugging under development in my tab 7.7
Could it be i didnt tick usb Debugging mode when flashing the rom??
ANy suggestions?
Side Note: Widgets like google-my library also not working. It shows a grey big icon thats all..
Click to expand...
Click to collapse
for usb look at this topic and use this driver.
usb debugging was required for kies also.

bassem.mohsen said:
for usb look at this topic and use this driver.
usb debugging was required for kies also.
Click to expand...
Click to collapse
Which post which topic which driver???
I have kies could use it but now kies doesn't detect anythingr

LFTI said:
Which post which topic which driver???
I have kies could use it but now kies doesn't detect anythingr
Click to expand...
Click to collapse
LooL, can't believe i forgot to put the link
http://forum.xda-developers.com/showthread.php?t=2070243

bassem.mohsen said:
LooL, can't believe i forgot to put the link
http://forum.xda-developers.com/showthread.php?t=2070243
Click to expand...
Click to collapse
Hmm not working.. wonder what could be wrong...

LFTI said:
Hmm not working.. wonder what could be wrong...
Click to expand...
Click to collapse
uninstall everything.
and you have to follow the instruction.
. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
https://www.dropbox.com/s/ay0aroxd2wdrezc/KiesSetup.exe
https://www.dropbox.com/s/psldnrg39pk6qa0/Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
---------- Post added at 03:05 PM ---------- Previous post was at 02:39 PM ----------
this worked for me on cyanogenMod.
it was giving me hw id is messing. and this solved it.

ur
Didn't work.. wonder if reflashing will work

LFTI said:
Didn't work.. wonder if reflashing will work
Click to expand...
Click to collapse
can you access the data on the tablet and sd card from the computer?
try cm 10 or 10.1 both are cool

bassem.mohsen said:
can you access the data on the tablet and sd card from the computer?
try cm 10 or 10.1 both are cool
Click to expand...
Click to collapse
I can access data on the tablet sd too but I cant detect anything on the computer even the sd card nothing is shown... weird..

hmm so the only way i see to get back the USB working is go back to Stock rom?? erm I tried connecting to ODIN nothing is detected.
How to i get back to stock using the nandroid backup i made earlier... anyone?

LFTI said:
hmm so the only way i see to get back the USB working is go back to Stock rom?? erm I tried connecting to ODIN nothing is detected.
How to i get back to stock using the nandroid backup i made earlier... anyone?
Click to expand...
Click to collapse
setup latest kies with latest drivers.
go to download mode, download is not related to enabling usb dubugging from settings (it should be detected in odin normally)
first wipe the data and factory reset in twrp, or cwm first to avoid super brick bug.
flash the downloaded rom as the tutorial steps normally.

i9003 no usb in mode download

hello all
after have insert a new rom kpe stock + cfroot kpe i have put in a bad universal cfroot and then nothing after reboot
i think it's bricked or locked only i remark that the batteries doesn't work normaly because the screen one time connected on the adaptator
flash evrey 5 seconds and if i pull the three key (vol- home power) for enter in download mode i can do it but one time in this mode it's not possible to connected odin no com yellow come another solution is to try directly the driver adb samsung but nothing too.
i'm going have to try the usb jig for reset but i don't know what i 'm trying now for debugging or find another solution please help me
if a solution exist but not sure FYI the recovery mode is not fonctionnal.
all solution or idea are welcoming sorry for english language but i'm trying to explain you with my proper term.
jacknew thanks in advance.

did you install Samsung drivers?
If you did not just follow this thread forum.xda-developers.com/showthread.php?p=45871089
---------- Post added at 02:07 AM ---------- Previous post was at 02:04 AM ----------
amsad said:
If you did not just follow this thread forum.xda-developers.com/showthread.php?p=45871089
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45871089

i9003 no usb in download mde
Hi thank a lot for you help but i already use and install a new driver but same problem after
so this is not the driver because i've already try the same test on the mac system with the equivalent sofware of windows under mac this is heimdall and i've the same problem then this is not the driver i think.
i'm going to purchase a usb jig for reset and i will see what happen after the reset.
thank you very much.

A USB jig, is to go download mode, anyhow u still need to settled the driver issue first.
Sent from my GT-I9003 using Tapatalk

chongns said:
A USB jig, is to go download mode, anyhow u still need to settled the driver issue first.
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
hi
how to do that, how i must reinstall usb driver in my phone ?

You have to reinstall drivers on pc, not phone.

U flashed cfroot come from where?
And I think u have boot loop.
If you can go download mode, than u can do flashing stock ROM. Just have to settle your PC driver.
Try uninstall all driver, and shutdown and restart PC (not restart PC), and reinstall again
Or get another PC which never install Samsung driver, install on it and see if Odin can detect your phone.
Or, try different USB port.
Edit: if you flashed other model cfroot, you have no hope.
Sent from my GT-I9003 using Tapatalk

hi all
i think chongns has raison i'm sure i'm flashed with instead of cfroot kpe i've flashed a bagaria 09 gt i9003 pda but normally all sait it's cfroot universal then normally it's not a problem but after reset the phone is briked.
i've already to reinstall usb driver one try on mac one try on windows, sorry severla try.
but i hope always.
FYI
i've alredy swap the usb cable
swap Os mac windows
Reinstall usb driver
try from odin/heimdall usb detection no good too
Strange Thing
battery life seem to be not good
when i connect the usb charge the screnn is blinking every 3, 5 seconds
and the batterie is not in charge when i've connected it to the usb power
cy u soon
thanks for your help
jack

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%

my phone doesnt recognized by pc if i start downloading mode

Hi guys .
i flashed "by mistake " the wrong cwm recovery by ( Rsher ) . after the device is restarted the screen just stopped on welcome screen .
now i have no access to recovery mode .
so i tried the other choice which was the download mode .
and here is my problem my pc doesnt recognize my android phone , when i connect the phone the pc displays these words
"usb is not recognized . the last device you connected to computer malfunctioned and windows does not recognized it "
also odin does not recognize it .
now i have no access neither to recovery mod nor to download mode and the device still freezing on welcome screen . so my device practically is DEAD!!
PLEASE IF YOU WANT TO HELP ME :
**KEEP IN MIND THE DEVICE " BEFORE THIS " WAS RECOGNIZED WHEN IT IS TURNED ON
** KEEP IN MIND OTHER PHONES LIKE GALAXY DOUS OR GALAXY BEAM IS WORKING ON THE SAME PC AND RECOGNIZED ON ODIN
** my phone is galaxy s II Plus working on android 4.2.2
**my pc is HP working on windows 10
**i have the latest Samsung kies and the latest drivers
** what i have tried
*update the driver on my pc
*uninstall and reinstall the driver
*using different usb cables
*uninstall the drivers and restarting pc
*updating other generic usb hub
*changing values in the registry
*I have tried all versions of odin
*pull the battery and entering download mode several times
PLEAAAAAAASE HELP :crying::crying::crying: ​

Try installing the google USB drivers.They are normally installed with the android SDK. Maybe they can help you detect the phone or you can try to manually update the driver.
Sent from my Moto E using Tapatalk

Cruzy12100 said:
Try installing the google USB drivers.They are normally installed with the android SDK. Maybe they can help you detect the phone or you can try to manually update the driver.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
thanks for replay but nothing happened still the same problem

abdanoo said:
thanks for replay but nothing happened still the same problem
Click to expand...
Click to collapse
Because in most cases this would have fixed the problem.Try some other forum maybe to get a different set of answers.
Sent from my Moto E using Tapatalk
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Cruzy12100 said:
Because in most cases this would have fixed the problem.Try some other forum maybe to get a different set of answers.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Or could also try to repeat the same steps in a different system.
Sent from my Moto E using Tapatalk

Cruzy12100 said:
Because in most cases this would have fixed the problem.Try some other forum maybe to get a different set of answers.
Sent from my Moto E using Tapatalk
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Or could also try to repeat the same steps in a different system.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
as i mentioned above sir , the phone is recognized when it is ON but the problem occurs when i go to download mode . i think it is not concerned with the drivers

Have a look at this soft-brick help guide. If your phone is not even able to enter the Recovery Mode, you may have a case of NAND rw corruption and recovery may not even be possible (you may have to look at hard unbrick scenarios).
Having said that, these are a few things I might have still tried if I were you:
1. If you have access to a Linux PC or a bootable Ubuntu drive, start it and see whether it recognizes your phone using the lsusb command. It will help you to rule out any driver issues.
2. Try to drain the battery (by keeping a long time in that welcome screen) and then do a fresh recharge and then try again.

prahladyeri said:
Have a look at this soft-brick help guide. If your phone is not even able to enter the Recovery Mode, you may have a case of NAND rw corruption and recovery may not even be possible (you may have to look at hard unbrick scenarios).
Having said that, these are a few things I might have still tried if I were you:
1. If you have access to a Linux PC or a bootable Ubuntu drive, start it and see whether it recognizes your phone using the lsusb command. It will help you to rule out any driver issues.
2. Try to drain the battery (by keeping a long time in that welcome screen) and then do a fresh recharge and then try again.
Click to expand...
Click to collapse
Well. , I have to say this is new solution . thank you brother I'll try and give you feedback ??

bricked On5 after changing "OEM" setting in Dev Options - VERY Frustrated

i am not a phone geek. i'm frustrated at the difficulty in getting a clear answer as to how to unbrick my G550T after getting "Custom binary blocked by FRP lock."
I've attempted approx 5 different "SOLVED" methods, none to any avail.
I know i'm not permanently bricked - i've been through this before. someone, please help???
I've downloaded Odin but it won't see my phone even when i boot my phone into DL mode.
Please help, someone?

Have you installed the samsung USB drivers? Tried different USB ports and/or cables.
You're on the right track here. Flashing stock firmware should solve it.
Skickat från min SM-A310F via Tapatalk

glennnall said:
i am not a phone geek. i'm frustrated at the difficulty in getting a clear answer as to how to unbrick my G550T after getting "Custom binary blocked by FRP lock."
I've attempted approx 5 different "SOLVED" methods, none to any avail.
I know i'm not permanently bricked - i've been through this before. someone, please help???
I've downloaded Odin but it won't see my phone even when i boot my phone into DL mode.
Please help, someone?
Click to expand...
Click to collapse
Does device manager on PC show anything when the device is connected?
Sent from my SM-S903VL using Tapatalk

Droidriven said:
Does device manager on PC show anything when the device is connected?
Click to expand...
Click to collapse
no, i don't see it.
thanks for your response. i would really love to just factory reset the thing if that's possible...

glennnall said:
no, i don't see it.
thanks for your response. i would really love to just factory reset the thing if that's possible...
Click to expand...
Click to collapse
Try uninstalling any of these if you have them:
1) Kies
2) Smart Switch
3) Samsung USB drivers
Then reinstall just the drivers and try Odin again.
Make sure it's a stock USB cord
Try different USB ports (i.e. 2.0, 3.0)
Try a different PC
Sent from my SM-S903VL using Tapatalk
---------- Post added at 06:21 PM ---------- Previous post was at 06:17 PM ----------
glennnall said:
no, i don't see it.
thanks for your response. i would really love to just factory reset the thing if that's possible...
Click to expand...
Click to collapse
Factory resetting is gonna be an issue with FRP(Factory Reset Protection)
Sent from my SM-S903VL using Tapatalk

Droidriven said:
Try uninstalling any of these if you have them:
1) Kies
2) Smart Switch
3) Samsung USB drivers
Then reinstall just the drivers and try Odin again.
Make sure it's a stock USB cord
Try different USB ports (i.e. 2.0, 3.0)
Try a different PC
Click to expand...
Click to collapse
Interestingly, I was unable to install Kies3 - kept stalling. I'm on a Samsung laptop/Win7.
Would Kies not help if i am able to install it?
I'll attempt your other suggestions. thanks

glennnall said:
Interestingly, I was unable to install Kies3 - kept stalling. I'm on a Samsung laptop/Win7.
Would Kies not help if i am able to install it?
I'll attempt your other suggestions. thanks
Click to expand...
Click to collapse
Kies can interfere with Odin, all you need is your stock firmware file, the USB drivers and Odin.
Sent from my SM-S903VL using Tapatalk