Sorry if this is in the wrong place. But i really am in a desperate need of help. My moto g2 suddenly turned off during the lollipop update and won't turn on anymore. I have tried to go into fastboot but no suck luck. The screen doesn't even light up when connecting the charger. Please help:crying:
Connect to pc via fastboot mode and flash stock rom
Sent from my AO5510 using Tapatalk
Use the following link for guidance
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
http://www.allfreeperks.in/2015/09/unbrick-how-to-unbrick-and-repair-moto.html?m=1
Sent from my AO5510 using Tapatalk
Cant go into the fastboot mode. Nothing happens when i press and hold the specific buttons.
Kuldeep Singh Rajput said:
Sorry if this is in the wrong place. But i really am in a desperate need of help. My moto g2 suddenly turned off during the lollipop update and won't turn on anymore. I have tried to go into fastboot but no suck luck. The screen doesn't even light up when connecting the charger. Please help:crying:
Click to expand...
Click to collapse
If it powered off during update and it won't boot to any of its modes, won't charge, won't connect to PC and won't respond in any kind of way then it is hardbricked, if that's what happened then your device is dead. You can see if a shop can repair it or get a new device.
Sent from my SCH-I535 using Tapatalk
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Kuldeep Singh Rajput said:
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Click to expand...
Click to collapse
Yes, your device is hard bricked. See your device detect in HS-USB QDLoader 9008 mode. If yes then your Android recover. Try android dbrick tool. I can give you the link of the tool. But I can't post on the XDA. Because it showing trojan infection. I used that tool and I recover my android from same condition. it not harmed my PC or my Android.
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Nope, just detects it as qhsusb_bulk. I tried the method of installing the driver to make it work. But it just keeps giving me digital signature error. Even after disabling the signature verification
Kuldeep Singh Rajput said:
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Click to expand...
Click to collapse
Try this
forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Sent from my SCH-I535 using Tapatalk
Yeah iv'e been trying that method for sometime now. But i just am unable to install the Riff box driver no matter how much i try. it just keeps saying the driver is without and digital signatures. Although i have disabled the signature verification in windows and all that the post suggested exactly as it says. Please help :crying:
Kuldeep Singh Rajput said:
Nope, just detects it as qhsusb_bulk. I tried the method of installing the driver to make it work. But it just keeps giving me digital signature error. Even after disabling the signature verification
Click to expand...
Click to collapse
Try these tutorial and install Qualcomm driver.
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Kuldeep Singh Rajput said:
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Click to expand...
Click to collapse
Then do a google search for
"Unbrick qhsusb_bulk Moto G"
That should give you a lot of links to various tools and methods, try them and see if it works for you.
Sent from my SCH-I535 using Tapatalk
Kuldeep Singh Rajput said:
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Click to expand...
Click to collapse
Your Android must show QHS-USB QDLoader 9008 port to begin next process.
It is shown as the bootloader but the tool fails to send the programmer packet to the device:crying:
Kuldeep Singh Rajput said:
It is shown as the bootloader but the tool fails to send the programmer packet to the device:crying:
Click to expand...
Click to collapse
Is your Android detects in 9008 port
It is detected in the port
Kuldeep Singh Rajput said:
It is detected in the port
Click to expand...
Click to collapse
Port is 9008 or 9006
qdloader 9008
Kuldeep Singh Rajput said:
qdloader 9008
Click to expand...
Click to collapse
Then give me your mail ID. I give you the download link of the tool. Earlier I said I can't post link on the XDA forum.
That would be amazing. Here is my email id - [email protected]
Related
Q&A for Recovery for LG G pro 2 F350 series tested working .
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Recovery for LG G pro 2 F350 series tested working .. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
recovery for d838
thank u very much..tested and workin on d838 32 gb runnin felix rom..
Tested on d938 and recovery works
d938
I tested and recovery works on d938 16gb
Error while flashing any zip
when i want to flash any zip in this recovery i got error: "error loki-ifying boot image".
bootloop
I installed this recovery and then when i shutdown my phone and turn it on it always go to recovery mode. I cant go to downloadmode. i do not have any zip file to install rom. what can i do to go to download mode? please help me. thank you very much
Restore Original recovery
Every time i select Reboot in recovery , it asks to flash original recovery. Will this restore Original recovery?
went to philz
When Im switching to power on my phone it always go to philz recovery. how would i Remove it and go to downloadmode as well to install stock rom. my phone got stock with philz touch and i dont know how to remove it. I need help. Thank you for any answer for my question.
---------- Post added at 03:35 AM ---------- Previous post was at 02:55 AM ----------
Is it possible to unbrick lg g pro 2 with jtag box? thank you for those who can answer.
@akosijaja You could try reboot into bootloader from philz recovery
Sent from my LG-D838 using XDA Free mobile app
akosijaja said:
When Im switching to power on my phone it always go to philz recovery. how would i Remove it and go to downloadmode as well to install stock rom. my phone got stock with philz touch and i dont know how to remove it. I need help. Thank you for any answer for my question.
---------- Post added at 03:35 AM ---------- Previous post was at 02:55 AM ----------
Is it possible to unbrick lg g pro 2 with jtag box? thank you for those who can answer.
Click to expand...
Click to collapse
Turn off the phone keep valume up and connect the pc you enter downloading mod and flash tot and dll file
If you see the qualcomm when recognize to pc your phon is hard brick jtag not support lg g pro 2 conect to tangkick payment for he.he connect the pc with teamviewer and fix the phon
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
And you can test this method I'm not sure work for g pro 2 but you can test
http://forum.xda-developers.com/optimus-g-pro/help/fix-hard-bricked-e980-t2829684
thankyou
meshk said:
Turn off the phone keep valume up and connect the pc you enter downloading mod and flash tot and dll file
If you see the qualcomm when recognize to pc your phon is hard brick jtag not support lg g pro 2 conect to tangkick payment for he.he connect the pc with teamviewer and fix the phon
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
And you can test this method I'm not sure work for g pro 2 but you can test
http://forum.xda-developers.com/optimus-g-pro/help/fix-hard-bricked-e980-t2829684
Click to expand...
Click to collapse
my pc recognize my phone as F350 which is my phones model but itshows that my phone is unknown source. is it possible to do the methods? thankyouverymuch for the help
akosijaja said:
my pc recognize my phone as F350 which is my phones model but itshows that my phone is unknown source. is it possible to do the methods? thankyouverymuch for the help
Click to expand...
Click to collapse
Your phone is hard brick but don't worry conect the phon to pc and download this driver in this link
http://www.driverscape.com/download/qualcomm-hs-usb-qdloader-9008
Description: Qualcomm HS-USB QDLoader 9008 Driver InstallerFile Version: 8.4File Size: 2.33MSupported OS: Windows 8, Windows 7, Windows Vista, Windows XP
Now you see qualcomm hsusb 9008 when your phone conect to pc
Now you should enter the linux os(ubuntu)
In ubuntu you install driver for your phone you should see many partition and read this method
http://forum.xda-developers.com/showthread.php?t=2582142
If you want any file for flash
You should extract kdz or tot file
Good luck
linux os
what if i dont have a linux os? is it possible that the windows os is capable of doing this things? thank you
akosijaja said:
what if i dont have a linux os? is it possible that the windows os is capable of doing this things? thank you
Click to expand...
Click to collapse
No. If can't install Linux You can use ubuntu live without install it
By learning to do
recovery working on lg3502
can you upload again a recovery.apk for the lg g pro 2 please? the link of philz recovery is broken
lot of thanks
Same here - stack on "Waiting for device"
LG-D83820c-TWN-XX Android 5.0.1
niiiro said:
Same here - stack on "Waiting for device"
LG-D83820c-TWN-XX Android 5.0.1
Click to expand...
Click to collapse
The recovery in this thread is for KK and won't work with Lollipop. In either case you will need to have a rooted rom and have USB debugging enabled which is why you are stuck at waiting for device
Sent from my LG-D838 using XDA Free mobile app
Thanks for your reply JohnnyInBriz!
I have a rooted phone and USB Debugging on. Yet, It doesn't work.
Any other suggestions?
Thanks again.
JohnnyInBriz said:
The recovery in this thread is for KK and won't work with Lollipop. In either case you will need to have a rooted rom and have USB debugging enabled which is why you are stuck at waiting for device
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
niiiro said:
Thanks for your reply JohnnyInBriz!
I have a rooted phone and USB Debugging on. Yet, It doesn't work.
Any other suggestions?
Thanks again.
Click to expand...
Click to collapse
Check in device manager to see if adb usb driver is installed
Sent from my LG-D838 using XDA Free mobile app
Yes, It is.
(Screenshot attached)
JohnnyInBriz said:
The recovery in this thread is for KK and won't work with Lollipop. In either case you will need to have a rooted rom and have USB debugging enabled which is why you are stuck at waiting for device
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
JohnnyInBriz said:
Check in device manager to see if adb usb driver is installed
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
my ph vibrt bt no display
Is your phone yu5010 or yu5010a
satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
bro my yuphoria is also dead it doesn't even get detected by pc as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 bro help me!!!
satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
Qfil is giving this error do you have any fix ??
arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
i'm dumping YU5010A Emmc once it is done.i don't know if flashing it on SdCard will revive my dead Yuphoria incase it works i will upload it
arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
tried it doesn't boots fastboot with sdcard
smh.saad said:
Qfil is giving this error do you have any fix ??
Click to expand...
Click to collapse
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro
satyabobby09 said:
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro
Click to expand...
Click to collapse
unable to connect to comPort error
smh.saad said:
unable to connect to comPort error
Click to expand...
Click to collapse
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
did u got COM Port error on windows 10 i got it on windows 8.1 nd 7
satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??
smh.saad said:
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??
Click to expand...
Click to collapse
I had both yu5010A n you 5010CM. I'll give u the link soon(I'm at office. I'll upload or find u the link when I reach home.). I had problem with win 10. And one more thing you should boot in safe mode for unsigned drivers to install
View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543
satyabobby09 said:
View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543
Click to expand...
Click to collapse
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?
ravi2106 said:
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?
Click to expand...
Click to collapse
I have unbricked my device. The process needs to be followed properly
Have u revived u r yuphoria
satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
Satyabobby09;
Can I get u r contact no plz so that I can get details regarding how to revive hard bricked yuphoria
satyabobby09 said:
I have unbricked my device. The process needs to be followed properly
Click to expand...
Click to collapse
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .
ravi2106 said:
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .
Click to expand...
Click to collapse
Yes you need qfil signed ROM n qpst. Also this is msm8916 so use msm8916.mbn
Guys follow this video its in Hindi hope this. Helps you
https://youtu.be/5qnr8bJ2Zso
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Just install Telegram
And visit
https://t.me/LeecoUnofficial
thank you..but it is not working
asif2017 said:
Install mtk drivers on ur pc ..it will detect
Or whatsapp me +919906673436
Sent from my Letv X500 using Tapatalk
Click to expand...
Click to collapse
the device is not at all detected by the laptop
Try vcom driver mobistel
sam7799 said:
due of unstable rom my phone is dead.. i want to flash it with the stock rom using sp flash tool but in devicce manager my phone is not deteccted by my laptop...if once the drivers are detected everything is solved, please tell me how to make my computer detect my phone
Click to expand...
Click to collapse
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Shrikantc615 said:
Hey .plz help me my phone letv le 1s is stuck on starting logo due wrong rom flashing my. Phone is bricked stuck on starting logo .plz anybady know solution plz tell me
My contact 7028953438
[email protected]
Click to expand...
Click to collapse
Do you have a backup of your rom you were using before?
If not then try to flash rom using SP flash tool ...for further information you can search on YouTube...?
[email protected]@ said:
Im also faced the same situation few months back,
Do these steps..
1.install adb drivers in pc,
2.in ur phone open twrp and select adb side load ..
3.run sp flashtools as administrator,press cntrl+atl+t and select device test..... now connect phn to pc..
4..if still ur pc didn't't recognise ur device...
5.then Chenge the com port (connect ur phone at back usb port of ur pc..)...
Best of luck dude..
Click to expand...
Click to collapse
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
mmrtov said:
Dude ! how am i supposed to go to twrp while phone is completely bricked.
It doesn't turn or just show red light and the pc is not detecting it.
Is there any solution i can get it recognized by the PC.
Click to expand...
Click to collapse
Flash stock rom using sptool if it is bricked
santoshhh000 said:
Flash stock rom using sptool if it is bricked
Click to expand...
Click to collapse
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Use mtkdrivers drivers
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
mmrtov said:
I try flashing the x509 using the stock firmware but it's still not recognised by the computer.
What should I do to get my phone recognised by the computer my phone is letv 1s le x509.
Click to expand...
Click to collapse
Have u tried installing vcom drivers ...? Before installing the rom.....
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
mmrtov said:
Please guide me about the driver like whis
Ch mtk driver i should install i m using windows 10 pro anniversary update 64 bit if possible please give me the download link.
Thank you
Click to expand...
Click to collapse
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ here is the step by step process to install drivers. According to your pc version.
Try this method
youtu.be/-KSExDz_78E
Daniyal_sheikh said:
youtu.be/-KSExDz_78E
Click to expand...
Click to collapse
Can you explain ,....,,.,.,......,?
Le 1s suddenly off not detecting sp tool and charging show red light
4 month before when i use leeco le 1s mobile suddenly off and i press power button mobile not on.. Mobile is ****ch off i try to on mobile but doesn't on, when i connect phone charger notifications light is red and not show screen charging or any other change and i also try sp flash tool but not working mujhe lga hardware problem hoga so .. After some day when mobile give local show then his charge me 1800 and mobile is on and fine.. After few hours same problem mobile off red light while charging not detect laptop.. When again i give mobile local show he suggested for mother board change and price is 3000 and i not charging my mobile motherboard sir please help.. Hardware problem or software same ideas any one
---------- Post added at 11:58 AM ---------- Previous post was at 11:55 AM ----------
Please contact me bro and help me.. 7987597172
Hello,
during updating my apps from google play, my phone turned down and now I can't turn on it. It lools like hardbricked. When I conntect it into laptop, in devices shows me as "Quectel QDLoader 9008 (COM4)".
Maybe is relevant to say, that the phone sometimes several times randomly reboot during last year.
Anyone any ideas please? :crying:
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732/amp/
So it doesn't matter, that I have Quectel QDLoader 9008 (COM4) instead QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 and it works same on win10 as win7-8?
Could be just a dead battery??
Bordiax said:
Could be just a dead battery??
Click to expand...
Click to collapse
Could be.But the very first thing to try is restoring the device from dead.
---------- Post added at 11:05 AM ---------- Previous post was at 11:03 AM ----------
Bordiax said:
So it doesn't matter, that I have Quectel QDLoader 9008 (COM4) instead QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 and it works same on win10 as win7-8?
Click to expand...
Click to collapse
Yeah,it worked for me on 10,too.However,if you run into detecting issues,try using 7.It'll show correct name after you install qhs drivers (given with the tool in the thread mentioned above).
When I start writing file 8974_msimage.mbn from Msm8974DownloadTool.exe to phone, there is sound of disconnect of USB and it do again and again. What is wrong?
Bordiax said:
When I start writing file 8974_msimage.mbn from Msm8974DownloadTool.exe to phone, there is sound of disconnect of USB and it do again and again. What is wrong?
Click to expand...
Click to collapse
Make sure you follow the given process very carefully.Did you install correct drivers?
Maybe not, I'm not sure
I tried again uninstall bricked device and install qualcomm 2012, but than it writes, that I have already the newest drivers. It is OK? :/
Edit: And now it writes ...Sahara... :'(
Edit2: Now 8974_msimage.mbn loop again.... I'm lost...
Edit3: Maybe the problem is that it doesn't work VolUP+Power button...
Bordiax said:
Maybe not, I'm not sure
I tried again uninstall bricked device and install qualcomm 2012, but than it writes, that I have already the newest drivers. It is OK? :/
Edit: And now it writes ...Sahara... :'(
Edit2: Now 8974_msimage.mbn loop again.... I'm lost...
Edit3: Maybe the problem is that it doesn't work VolUP+Power button...
Click to expand...
Click to collapse
https://www.google.co.in/amp/s/foru...eplusrecovery-tool-v1-0-restore-t2991851/amp/
Mr.Ak said:
https://www.google.co.in/amp/s/foru...eplusrecovery-tool-v1-0-restore-t2991851/amp/
Click to expand...
Click to collapse
Still the same loop
Edit: When I connect the phone to computer the usb shows like Unknow device. So I have to before connecting, hold VolUP+power for 15s, and 10s power to the usb shows like Qualcomm HS-USB QDLoader 9008. But when I switch on Color, there is just 8974_msimage.mbn loop.
I don't know, what I do wrong :/
Bordiax said:
Still the same loop
Edit: When I connect the phone to computer the usb shows like Unknow device. So I have to before connecting, hold VolUP+power for 15s, and 10s power to the usb shows like Qualcomm HS-USB QDLoader 9008. But when I switch on Color, there is just 8974_msimage.mbn loop.
I don't know, what I do wrong :/
Click to expand...
Click to collapse
What do ya' mean by "8974_msimage.mbn" loop? The process of flashing keeps going on and doesn't complete?
Mr.Ak said:
What do ya' mean by "8974_msimage.mbn" loop? The process of flashing keeps going on and doesn't complete?
Click to expand...
Click to collapse
Yes. I think is the same problem, as have this user: https://forum.xda-developers.com/oneplus-one/help/hard-bricked-oneplus-one-rebooting-help-t3423725
Bordiax said:
Yes. I think is the same problem, as have this user: https://forum.xda-developers.com/oneplus-one/help/hard-bricked-oneplus-one-rebooting-help-t3423725
Click to expand...
Click to collapse
Are you using an original/branded USB cable? It might happen due to slow transfer speed of local/unbranded cable.
Mr.Ak said:
Are you using an original/branded USB cable? It might happen due to slow transfer speed of local/unbranded cable.
Click to expand...
Click to collapse
Yes, I'm using the branded USB cable, the red one.
Bordiax said:
Yes, I'm using the branded USB cable, the red one.
Click to expand...
Click to collapse
Did you try using a different PC/lappy with windows7/xp?
Mr.Ak said:
Did you try using a different PC/lappy with windows7/xp?
Click to expand...
Click to collapse
I haven't got any opportunity. Only win10 or Linux.
Bordiax said:
I haven't got any opportunity. Only win10 or Linux.
Click to expand...
Click to collapse
Did you try waiting for like half an hour when loop occurs,maybe it's just the transfer speed that's slow?
Mr.Ak said:
Did you try waiting for like half an hour when loop occurs,maybe it's just the transfer speed that's slow?
Click to expand...
Click to collapse
Nope, even more than an hour the situation seems the same.
Bordiax said:
Nope, even more than an hour the situation seems the same.
Click to expand...
Click to collapse
Situation is same with cm11s restore tool as well?
Mr.Ak said:
Situation is same with cm11s restore tool as well?
Click to expand...
Click to collapse
If you mean the tool from this link: https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851, than yes. Absolutely same result
Now I'm thinking about service, but they want more than 60 dollars :/
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
How this happen to you???
What wrong you did?
Sent from my Redmi Note 7 Pro using Tapatalk
Go to service center they can help now your device will falashed by official id by mi flashtool
gautamajay52 said:
How this happen to you???
What wrong you did?
Sent from my Redmi Note 7 Pro using Tapatalk
Click to expand...
Click to collapse
Rooted without unlock bootloader ..
Grajatyadav said:
Go to service center they can help now your device will falashed by official id by mi flashtool
Click to expand...
Click to collapse
I'm going there
Mi authorised service center they
said motherboard complaint and return the product ..
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
How it happened ... elaborate it...
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
Try EDL mode or Get it to care. IG
sourav24071999 said:
How it happened ... elaborate it...
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
Try EDL mode or Get it to care. IG
Click to expand...
Click to collapse
Actually trying to root and installed twrp..
Then i flash custom rom.
After that phone doesn't turn on..
Showing only in pc Qualcomm 9008 mode.
When i try to flash with mi flash tool they ask me authentication .. i enter username and password but its not working bro .. any method to fastboot mode ? I tried all method but its not working ???
jishnukollam said:
Actually trying to root and installed twrp..
Then i flash custom rom.
After that phone doesn't turn on..
Showing only in pc Qualcomm 9008 mode.
When i try to flash with mi flash tool they ask me authentication .. i enter username and password but its not working bro .. any method to fastboot mode ? I tried all method but its not working
Click to expand...
Click to collapse
Try EDL mode .. also nxt time just follow proper guidance for root ... Stay updated to violet community discussion in tg
Tg channel link ?
From kerala.
jishnukollam said:
Tg channel link ?
Click to expand...
Click to collapse
Bro i'm from kerala.
You cant flash in edl mode.
it requires mi authorized login.
It happened to me also. Hard brick not turning on.
Just went to service center and told phone bricked in between update process.
So they repair it within 1 hour.
Its the only way i know possible.
MOD EDIT: Telegram link removed, read the STICKY!
Redmi Note 7 Pro Hard Bricked
Not turn On
only show Qualcomm HS-USB QDLoader 9008
No display
What can i do...
{Note: I have trying to boot patch in umt by select model: redmi note 7.. After that phone is bricked..}
Please help me...
Redmi note 7pro 100% working process
My mobile is redmi note 7 pro I tried to install twrp and bricked(soft) 10 times after all i installed it to show twrp whoami and after some bricks successfully installed magisk
//My opinion: if you are not a geek don't try twrp instead flash orangefox recovery it has inbuild magisk installer "warn you don't install disable-dmvariety-forceencryption. zip = otherwise bootloop"//
##Power users: without disable encryption changing anything in system leads to bootloop don't uninstall system apps (disable encryption works in twrp you need that method contact me in"[email protected]")##
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
is it working now ?