Database Info

[Q] Lenovo a369i - Cannot connect to my computer

So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted

Flash stock firmware back on.
I'm not home or I would search for links sorry.
In Google type your phone name + return to stock.
Sent from my LG-VS980 using XDA Premium 4 mobile app

1165
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!

PauloAgojo277 said:
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!
Click to expand...
Click to collapse
To put the stock rom back on lenovo device, it must be powered off. (if it has a removable battery it must be removed).
preinstal the drivers into pc/laptop.
open device manager
plug in lenovo.
if device manager says 'mediatek,,,,' you are a winner & can use the sp flash tool included in the zipped rom to instal the rom.
if device manager says 'unknown device' you have 2 seconds to click on it & select update driver and a point to the downloaded lenovo driver (then it will be as above).
When you get green circle you are complete and may disconnect and put battery back in.

PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50094020
Here's a step by step guide ..please be aware of the steps .. That help me from bricking my phone almost so many times
Sent from my Lenovo A369i using XDA Free mobile app

If you are using windows 8 then you can't install USB drives
---------- Post added at 02:20 AM ---------- Previous post was at 02:12 AM ----------
PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
So if you are using windows 8 or higher version of windows then simply you have to degrade it to windows 7 or lower to install USB driver's

LG G3 D855 32 GB won't turn on after flasing stock rom

Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You

aeroexpert said:
Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Can you access TWRP? Can you access Download Mode? Please provide more info. Although I know nothing about unbricking devices, maybe someone with the right experience can help you, but you should give as much info and details as possible.

If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D using XDA-Developers mobile app

joe2k01 said:
If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D]
Click to expand...
Click to collapse
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.

aeroexpert said:
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.
Click to expand...
Click to collapse
Maybe you should try this: http://appsandtips.blogspot.co.il/2015/11/how-to-hard-unbricked-lg-g3-all-variants.html?m=1
This tutorial also seems nice: http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Good luck and hope you'll unbrick it successfully. Anyway you got nothing to lose I guess...
Sent from my LG G3 D855 running stock Lollipop v21a.

I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app

aeroexpert said:
I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
As I said earlier, I have no experience with unbricking. However, what is your PC operating system (maybe windows 10 do problems?), do your device appear as qualcomm 9008 in the device manager?
Sent from my LG G3 D855 running stock Lollipop v21a.

Thank You, I am on WIN 10, that is not a problem , I shall see what I can do, May be I shall use LG Smart Boot Diagnostics Tool
Sent from my ALE-L21 using XDA-Developers mobile app

[HOW TO] Unbrick Moto G 2013! [Falcon, Peregrine] [Lollipop guide]

Moto G Unbrick Guide​
If you're here, this means that you are one of the most (?) owner of a moto G Bricked with Lp bootloader.
This thread is based on the original One , credits for the old guide goes to @oversleeper !
Other important credits:
Thanks to @ilikered for the tools and to @Nitzz for the bat and suggestions/helps to unbrick our Falcon!
A Big Thanks also to @Alberto97 for the corrections on this thread!
I have used a lot of my time to create this and help you
If you want to help me back, a free donation is accepted, of course
Euro Donation
Dollars Donation
Do NOT share anything from this thread. Don't mirror anything without permissions. ​
Now, let's start from the beginning!
Necessary Stuff:
Riff BOX JTAG drivers + Driver Signature Enforcement Overrider / Mirror
Motorola Drivers (link okay)
New Blankflash files / Mirror (thanks again, ilikered)
Motorola Fastboot / Mirror
Flash5.1.bat.zip / Mirror - Updated 09/06/2016
Logo.bin replacement for unlocked bootloader / Mirror
Moto G (1st Gen) Factory Firmware Images
Procedure
If your Moto G is recognized as "Qualcomm HS-USB QLoader 9008" jump to step 11.
Extract Riff BOX drivers into a folder (you will find both 32bit and 64bit versions).
Open dseo13b.exe and choose "Sign a System File"
Follow the program instructions and write manually the path of qcusbser.sys
The program will ask a reboot.
While starting reboot press F8 until you get some voices, then choice "Disable Driver Signature Enforcement" (otherwise try some tricks from here
Click Windows Start button and write "devmgmt.msc" without quotes
From Device Manager window go on "qhsusb_bulk" (if not shown unplug and plug again your Moto G or long press the power button)
Choose "Update Driver Software"
Choose the manually way and put the path of your previously extracted and signed drivers.
Your Moto G is now recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT).
Don't disconnect the phone from PC
Extract the blankflash zip into the Desktop
Enter into the blankflash folder and double click on the bat file
Device unbricked!
Let your phone on charge at least for 2 hours on pc, not on wall charger (until you see battery ok instead "low battery")
Extract the rom downloaded previously into a folder that you will protect as your life
Put the Flash5.1 bat file (Included into the Flash5.1 Zip downloaded) and mfastboot files into Rom Folder
(Optional) Replace logo.bin into Rom Folder within the one on Bootlogo.zip
After 2 hours try a reboot (cmd -> mfastboot reboot) and check if it's okay, the battery; otherwise wait another hour.
When your phone shows battery as "okay", you can continue
Go into rom folder
Double click on flash5.1.bat
Press enter when phone complete the reboot on bootloader mode
Wait while cmd do the tasks!
Press enter (again) when asked
Choose it with volume up "normal boot"
Enjoy your Moto G 2013 Back to life!
In case your phone doesn't go on bootloader mode or do weird things:
By @hakneo :
If anyone is not able to connect as Moto Mfastboot mode driver and your battery is not charging through USB as told in guide, this may help.
1. Start up the device manager. Uninstall any UNKNOWN Moto devices.
2. Remove the device cable and Uninstall Motorola Driver software.
3. Restart the PC in normal mode and reinstall the Moto Driver suite.
4. Hold the down volume and connect the cable. Now Windows should install it and your phone will start charging.
Go ahead with the flash.
Note: If you get a bootloop, go back into bootloader mode with phone connected at pc and use again the bat file
Every thanks is appreciated, if this procedure helped you

Thanks for making the guide!! Great job!!
Sent from my Moto G (4) using Tapatalk

Thanks so much, now I have a spare Moto G mainboard ;D

Crabsi said:
Thanks so much, now I have a spare Moto G mainboard ;D
Click to expand...
Click to collapse
I'm glad to help who haven't lost hope until end
I'm pretty destroyed for the guide creation xD
PS: Uploading an I'm-lazy-rar with rom stock 5.1 Retail GB for falcon with fastboot inside and bat

FabioSan said:
I'm glad to help who haven't lost hope until end
I'm pretty destroyed for the guide creation xD
PS: Uploading an I'm-lazy-rar with rom stock 5.1 Retail GB for falcon with fastboot inside and bat
Click to expand...
Click to collapse
How long does the upload take?
Nevermind just download the german retail version from filefactory
Edit: Thanks for putting the link for the firmwares into the description! Filefactory sucks

Crabsi said:
How long does the upload take?
Nevermind just download the german retail version from filefactory
Edit: Thanks for putting the link for the firmwares into the description! Filefactory sucks
Click to expand...
Click to collapse
I have updated a lot the thread

I have a moto g 4G with hard brick. The computer recognize it as a Qualcomm device but I get a Blank-Flash Reading error reading device. I have tried with the blank-flash in these post and the previous one with the same results.

My Motog is back to life.. but the firmware which i have downloaded and flashed using 5.1.bat file was XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xml but the android software which is currently in the device is kitkat 4.4.4 GPE.. which my motog tried to install via ota before hardbricking.. how to get back to lollipop 5.1. asia dual sim version

Now its my turn to bring back my moto G life

Your the best !! My Moto G is alive and now, I have two Moto G !!

Patrola said:
I have a moto g 4G with hard brick. The computer recognize it as a Qualcomm device but I get a Blank-Flash Reading error reading device. I have tried with the blank-flash in these post and the previous one with the same results.
Click to expand...
Click to collapse
Post the exact error please. A pic would help.
Sent from my Moto G (4) using Tapatalk
---------- Post added at 04:18 AM ---------- Previous post was at 04:17 AM ----------
varunvijay89 said:
My Motog is back to life.. but the firmware which i have downloaded and flashed using 5.1.bat file was XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xml but the android software which is currently in the device is kitkat 4.4.4 GPE.. which my motog tried to install via ota before hardbricking.. how to get back to lollipop 5.1. asia dual sim version
Click to expand...
Click to collapse
You mean it's booting to Kitkat now? What's the bootloader version?
Sent from my Moto G (4) using Tapatalk

ilikered said:
Post the exact error please. A pic would help.
Sent from my Moto G (4) using Tapatalk
The forum does not allow me to post pics or links yet so I send you a pv message with the pic to se if you can help.
Thanks,
Click to expand...
Click to collapse

Much thank you

My phone when it is in the bootscreen isn't recognised in the device manager. However, when I press volume down +power and goes into fastboot mode, phone is shown in the device manager as Motorola ADB Interface. I'm totally stuck, a noob. Please Help.

vivekp1410 said:
My phone when it is in the bootscreen isn't recognised in the device manager. However, when I press volume down +power and goes into fastboot mode, phone is shown in the device manager as Motorola ADB Interface. I'm totally stuck, a noob. Please Help.
Click to expand...
Click to collapse
What's your bootloader version in fastboot mode?
Sent from my Moto G (4) using Tapatalk

Patrola said:
I have a moto g 4G with hard brick. The computer recognize it as a Qualcomm device but I get a Blank-Flash Reading error reading device. I have tried with the blank-flash in these post and the previous one with the same results.
Click to expand...
Click to collapse
Please follow completely the guide
Start from step 11, but remember to reboot pc with driver signature off
varunvijay89 said:
My Motog is back to life.. but the firmware which i have downloaded and flashed using 5.1.bat file was XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xml but the android software which is currently in the device is kitkat 4.4.4 GPE.. which my motog tried to install via ota before hardbricking.. how to get back to lollipop 5.1. asia dual sim version
Click to expand...
Click to collapse
Maybe you can follow the procedure?
From the step after the unbrick.
On first post, on the Needed stuff, there is a link to the fastboot firmwares zip
There you can download your and continue to follow the procedure
Inviato dal mio ONE E1003 utilizzando Tapatalk

vivekp1410 said:
My phone when it is in the bootscreen isn't recognised in the device manager. However, when I press volume down +power and goes into fastboot mode, phone is shown in the device manager as Motorola ADB Interface. I'm totally stuck, a noob. Please Help.
Click to expand...
Click to collapse
If it's seen as adb interface is correct!
Continue the procedure
Inviato dal mio ONE E1003 utilizzando Tapatalk

Thank u bro my phone is back to life again....
FabioSan said:
Moto G Unbrick Guide​
MOD EDIT: No need to quote whole OP
Click to expand...
Click to collapse

Procedure Updated
New Flash5.1.bat file (updated few minutes ago to do a correct and better flash)

FabioSan said:
Procedure Updated
New Flash5.1.bat file (updated few minutes ago to do a correct and better flash)
Click to expand...
Click to collapse
My moto G back to life but cant flash stock rom due to battery low waiting for it to get charged
Sent from my Primo-GH2 using XDA Free mobile app

my phone doesnt recognized by pc if i start downloading mode

Hi guys .
i flashed "by mistake " the wrong cwm recovery by ( Rsher ) . after the device is restarted the screen just stopped on welcome screen .
now i have no access to recovery mode .
so i tried the other choice which was the download mode .
and here is my problem my pc doesnt recognize my android phone , when i connect the phone the pc displays these words
"usb is not recognized . the last device you connected to computer malfunctioned and windows does not recognized it "
also odin does not recognize it .
now i have no access neither to recovery mod nor to download mode and the device still freezing on welcome screen . so my device practically is DEAD!!
PLEASE IF YOU WANT TO HELP ME :
**KEEP IN MIND THE DEVICE " BEFORE THIS " WAS RECOGNIZED WHEN IT IS TURNED ON
** KEEP IN MIND OTHER PHONES LIKE GALAXY DOUS OR GALAXY BEAM IS WORKING ON THE SAME PC AND RECOGNIZED ON ODIN
** my phone is galaxy s II Plus working on android 4.2.2
**my pc is HP working on windows 10
**i have the latest Samsung kies and the latest drivers
** what i have tried
*update the driver on my pc
*uninstall and reinstall the driver
*using different usb cables
*uninstall the drivers and restarting pc
*updating other generic usb hub
*changing values in the registry
*I have tried all versions of odin
*pull the battery and entering download mode several times
PLEAAAAAAASE HELP :crying::crying::crying: ​

Try installing the google USB drivers.They are normally installed with the android SDK. Maybe they can help you detect the phone or you can try to manually update the driver.
Sent from my Moto E using Tapatalk

Cruzy12100 said:
Try installing the google USB drivers.They are normally installed with the android SDK. Maybe they can help you detect the phone or you can try to manually update the driver.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
thanks for replay but nothing happened still the same problem

abdanoo said:
thanks for replay but nothing happened still the same problem
Click to expand...
Click to collapse
Because in most cases this would have fixed the problem.Try some other forum maybe to get a different set of answers.
Sent from my Moto E using Tapatalk
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Cruzy12100 said:
Because in most cases this would have fixed the problem.Try some other forum maybe to get a different set of answers.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Or could also try to repeat the same steps in a different system.
Sent from my Moto E using Tapatalk

Cruzy12100 said:
Because in most cases this would have fixed the problem.Try some other forum maybe to get a different set of answers.
Sent from my Moto E using Tapatalk
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Or could also try to repeat the same steps in a different system.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
as i mentioned above sir , the phone is recognized when it is ON but the problem occurs when i go to download mode . i think it is not concerned with the drivers

Have a look at this soft-brick help guide. If your phone is not even able to enter the Recovery Mode, you may have a case of NAND rw corruption and recovery may not even be possible (you may have to look at hard unbrick scenarios).
Having said that, these are a few things I might have still tried if I were you:
1. If you have access to a Linux PC or a bootable Ubuntu drive, start it and see whether it recognizes your phone using the lsusb command. It will help you to rule out any driver issues.
2. Try to drain the battery (by keeping a long time in that welcome screen) and then do a fresh recharge and then try again.

prahladyeri said:
Have a look at this soft-brick help guide. If your phone is not even able to enter the Recovery Mode, you may have a case of NAND rw corruption and recovery may not even be possible (you may have to look at hard unbrick scenarios).
Having said that, these are a few things I might have still tried if I were you:
1. If you have access to a Linux PC or a bootable Ubuntu drive, start it and see whether it recognizes your phone using the lsusb command. It will help you to rule out any driver issues.
2. Try to drain the battery (by keeping a long time in that welcome screen) and then do a fresh recharge and then try again.
Click to expand...
Click to collapse
Well. , I have to say this is new solution . thank you brother I'll try and give you feedback ??

LG L90 (d405n) wont turn on (black screen). Help please.

Hi,
I tried to unlock bootloader. Rooted phone using King Root successfully. Opened bootloader using inside terminal and installing proper aboot. Then without restart i also flashed proper TWRP usning Twrp manager and after clicking reboot bang... black screen and nothing happens. Phone wont act on power button , keys combinations etc. When i connect it using usb i see partition with 2 folders (version and images). I tried some methods like using LG Flash Tool 2014 but it stucks on 4% and wont go ahead no matter what i do (recconecting ,removing battery etc). I would be VERY thankful if someone can provide me step by step solution or just do it via Teamviewer. If someone would like to help using TV method please contact me via skype (siuted.max - ID) and i ll provide TV ID.
Regards
Mat.

I really need that help guys I am even willing to pay for someone who is able to fix it.

Lg toolkit and pc easy fix but if you cant see recovery too or fastboot.using key combo do hou have the lg toolkit?fastboot,adb?sounds like you need too reload 15 second adb fastboot installer.when flash tool gets to adb or fastboot and get stuck.go to update driver device manager,and see if theres a triangle or ? There,then update that driver.let me know?
Sent from my SM-J320P using Tapatalk

skully35 said:
Lg toolkit and pc easy fix but if you cant see recovery too or fastboot.using key combo do hou have the lg toolkit?fastboot,adb?sounds like you need too reload 15 second adb fastboot installer.when flash tool gets to adb or fastboot and get stuck.go to update driver device manager,and see if theres a triangle or ? There,then update that driver.let me know?
Sent from my SM-J320P using Tapatalk
Click to expand...
Click to collapse
Thank You for reply ! Would You like to make it step by step and exactly what to do or links ?
1. I have LG Toolkit 2014
2. Fastboot and adb i have on my pc but "device not found" no matter what i do.
3. How to reload 15 second adb fastboot installer ?

OK I know its tuff when its not being s hown like. A video ?,I researched your model a little,do you see you costom recovery when using the hold home and volume up keys?or is that also blacked out? And can you see fastboot using phone keys?does your phone make a sound when plugged too your PC?a lot of questions but its important? then I can easily direct you better!
Sent from my Sero 7 pro using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:38 AM ----------
If you phone makes a noise plugged in I can guide you,k?I brought 4 phones back from the dead this week!I'm on a roll!lol,,when I stayed reload 15 min.installer I meant you may have to turn on terminal to PC and hit adb devices then check driver updater and reinstall your drivers.very easy I just need to know where we stand.
Sent from my Sero 7 pro using Tapatalk

I see nothing on the screen. No matter what i push (any combination) nothing appears. After connecting phone there is no sound. PC recognizes it as Android device. Thats all. No fastboot as well.

skully35 said:
OK I know its tuff when its not being s hown like. A video ,I researched your model a little,do you see you costom recovery when using the hold home and volume up keys?or is that also blacked out? And can you see fastboot using phone keys?does your phone make a sound when plugged too your PC?a lot of questions but its important then I can easily direct you better!
Sent from my Sero 7 pro using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:38 AM ----------
If you phone makes a noise plugged in I can guide you,k?I brought 4 phones back from the dead this week!I'm on a roll!lol,,when I stayed reload 15 min.installer I meant you may have to turn on terminal to PC and hit adb devices then check driver updater and reinstall your drivers.very easy I just need to know where we stand.
Sent from my Sero 7 pro using Tapatalk
Click to expand...
Click to collapse
Hey. Sorry to say but phone is not giving any vibration or noise... Only windows gives a sound typical to connecting USB device and thats all. Phone looks like dead and only thing is recognizing it by windows.

Hey,
Anybody knows a solution ? I read some threads here but i failed when trying. I would really appreciate for step by step walkthrough.
Thank You!

Guide to unbrick lg l90
fazics1 said:
Hi,
I tried to unlock bootloader. Rooted phone using King Root successfully. Opened bootloader using inside terminal and installing proper aboot. Then without restart i also flashed proper TWRP usning Twrp manager and after clicking reboot bang...
Click to expand...
Click to collapse
Use this guide from one of the XDAmembers. Hope you get your phone get fixed soon.
https://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429