Hi folks,
I've just updated my one plus 6 to android 10 and I already have many problems. The rotation and the automatic brightness are not working anymore. Plus, when you try to put your phone near your ear to listen to an audio message on WhatsApp is not working as well. Am I the only one with these problems?
Thanks
Same here.
Is this a bug or did I something wrong?
mine worked perfectly fine. but i find some issues where when i type on my keyboard it's little bit laggy. that's bother me a lot. so i had to soft reboot it
I get the same issues.. I'd fixed with factory reset, now everything works fine
I wasn't getting notifications of missed calls so factory reset. Then I couldn't access my contacts with the message saying something like, you haven't given all permissions. I downloaded another call app and gave all permissions. It worked fine, so I deleted it and gave all permissions to the OnePlus phone app (including location which I'm sure I never had to give previous). It now works...
rrubio999 said:
I get the same issues.. I'd fixed with factory reset, now everything works fine
Click to expand...
Click to collapse
Oh my... I don't want to do a factory reset ?
I fixed it by uninstalling Magisk via TWRP (there's now an easy guide to install it in Android 10), rebooting to system, check if the sensors are working again, and then reinstalling Magisk through TWRP again. If this happens again just re-do the procedure, an update will probably fix this.
my sensors went bad when first installing the open beta 30, but with a cache wipe in the recovery, everything should be back to normal again. Well, in my case it was so you should give it a shot as well
HighOnLinux said:
my sensors went bad when first installing the open beta 30, but with a cache wipe in the recovery, everything should be back to normal again. Well, in my case it was so you should give it a shot as well
Click to expand...
Click to collapse
I usally don't post comments on this forum but i would like to thank you. I had the same sensor issues since Android 10 and it really grinded my gears..
Just wiped cache from recovery and voila, the auto rotate works like a charm.
Thank you very much my friend and have a great day! :good:
Related
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
lock the bootloader and send it back
shahidhussain said:
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
lichti1901 said:
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
Click to expand...
Click to collapse
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
I have the same problem, when I change the camera app to record nothing happens when I press the red record button. I think the problem started when I upgraded to 4.4.2
Sent from my Nexus 5 using Tapatalk
shahidhussain said:
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
Click to expand...
Click to collapse
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
You need to uncompress each download before use, which creates a new directory for that exact download. That directory contains a ./flash-all.sh script, which handles the various operations, installs the necessary bootloader, baseband firmware(s), and operating system. Note that this operation deletes all user data by default
Click to expand...
Click to collapse
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Click to expand...
Click to collapse
I did not flash anything. The phone was OTA updated. Please note that the phone received OTA update and when I applied it, it completed its process but did not update (it was still on older android version) and this happened several times (I mentioned this on a separate thread here on XDA old post).
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
shahidhussain said:
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
Click to expand...
Click to collapse
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
gee2012 said:
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
Click to expand...
Click to collapse
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
shahidhussain said:
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
Click to expand...
Click to collapse
Glad you worked it out!
Good thing is - you got a Nexus, so its easy to flash all the stuff and go back to stock/factory image/recovery/...
:highfive:
Any update on this? I have this exact problem. No unlock, not root just pure OTA stock.
1. Video does not record. You press the red button and no timer comes up.
2. A VID_20140126_224910.mp4.tmp file is created 395.54 KB.
3. Time lapse works as do all the other camera functions.
4. The basic Google FAQ has generic instructions if an app does not work so I followed these.
5. in safe mode the camera works fine.
6. Power off and on again. The Video Camera then works fine and creates normal .mp4 files.
Things I have done that may affected the Camera in the first place;
1. Clear cache.
2. Put a .thumbnails file in DCIM to stop the gigantic .thumbnail folder being created.
3. Running nova launcher.
Unlikely these are a factor as I isolated them as an issue and rebooted but worth a mention just in case.
Camera works but have found the it subsequently stopped working again and had to repeat the Google FAQ steps to fix an app.
To answer my own question I found the uninstalling Said It_1.3.37.apk fixed the problem and just to prove it reinstalling brought the problem back.
---------- Post added at 06:01 PM ---------- Previous post was at 05:27 PM ----------
Quick update. the developer emailed me back. He co firmed it does the same on his device and will send an update.
Just flashed lollipop and everything works perfect except for Bluetooth. Phone simply says there are no other Bluetooth devices in range, and those devices can't see the nexus. I tried rebooting, factory reset, re-flashing stock lollipop using flash-all batch and even Wug toolkit just to cover all my options but still no work around. Anyone else experience this problem or can think of a way to fix it? Anything would help.
Wipe Cache
TheRoice said:
Just flashed lollipop and everything works perfect except for Bluetooth. Phone simply says there are no other Bluetooth devices in range, and those devices can't see the nexus. I tried rebooting, factory reset, re-flashing stock lollipop using flash-all batch and even Wug toolkit just to cover all my options but still no work around. Anyone else experience this problem or can think of a way to fix it? Anything would help.
Click to expand...
Click to collapse
Hi, one of my friend faced similar issue and wiping the cache from recovery helped solve the issue.
Try wiping cache and reboot.
pppp6071 said:
Hi, one of my friend faced similar issue and wiping the cache from recovery helped solve the issue.
Try wiping cache and reboot.
Click to expand...
Click to collapse
Just tried the wipe and reboot but the issue is still persistent. I'm still looking around for a solution but nothing has come up yet. Thanks for the input though!
lollipop im nexus5 bluetooth unstable
I just downloaded the lollipop today on my NX5 and i have a bluetooth SENA smh10 for my helmet and it was working very fine before the update, now its unstable, iv to start the music app first on phone while connecting the bluetooth inorder to be able to control it via the bluetooth device, also for calls, i recieved a call and i opened but no sound was there, i tried to call, same happened, so i had to disconnect the device, make the call and then i connected again..after a while it worked and i made a call... Theres some bug in the bluetooth i guess as my smh was working fine before. Also iv a problem in some wedges not responding like the data on off one. Oh yes..and battery empties SO Fast
TheRoice said:
Just tried the wipe and reboot but the issue is still persistent. I'm still looking around for a solution but nothing has come up yet. Thanks for the input though!
Click to expand...
Click to collapse
So I solved the issue. Re-flashed 5.0 to the device, rebooted, and wiped cache. It still didn't pick up bluetooth as of last night but it worked this morning. Also, for any android wear users (or at least moto 360) the phone wouldn't pick up the watch until I did factory reset on the watch and opened android wear on the phone itself in order to accept terms and conditions.
@TheRoice
thanks, has worked for me :good:
After updating my Nexus to 5.0, the camera worked fine for a couple of weeks. However, starting from a few days ago, when I open my camera app, it won't function at all; instead, all I get is the screen shown in the screenshot.
I'm afraid that's all I can really explain about this problem, as I can't think of any other relevant details.
Thanks in advance.
Beplexor said:
After updating my Nexus to 5.0, the camera worked fine for a couple of weeks. However, starting from a few days ago, when I open my camera app, it won't function at all; instead, all I get is the screen shown in the screenshot.
I'm afraid that's all I can really explain about this problem, as I can't think of any other relevant details.
Thanks in advance.
Click to expand...
Click to collapse
Have you tried rebooting your device ?
MrFishiz said:
Have you tried rebooting your device ?
Click to expand...
Click to collapse
Of course, I tried it twice.
Guess what though? After reading your post, I decided to try it again just for the sake of it, and it works now...Thanks for the solution haha?
Beplexor said:
Of course, I tried it twice.
Guess what though? After reading your post, I decided to try it again just for the sake of it, and it works now...Thanks for the solution haha?
Click to expand...
Click to collapse
Sometimes I get this annoying message when I try to access the camera, it says " Cannot connect to the camera " so what I usually do is reboot my device and then everything works again aha.
Glad it sorted itself out.
Same problem. Rebooted 4 times. Cleared cache. Still no camera
I have the same issue, tried the following
Reboot
Clear camera data
Reboot
Clear device cache
Reboot in safe mode
Reboot
None of that worked.
Tempted to try a new ROM and go from stock 5.0.0... See if that helps
I'm on stock rooted 5.0 and I have gotten this issue multiple times. Multiple reboots fix it temporarily but I can't figure out what actually triggers the issue.
I rarely use the flashlight pulldown, and haven't at all during the last few reboot cycles that this has still happened.
A few days ago my phone started showing this message ("Can't connect to camera") when I try to open anything camera related. I googled this problem and I found a workaround involving killing the "media" process but my problem doesn't seem to be related to that since this method didn't worked for me. I am sure that this is not hardware related either, I made a test with wiping my phone and with a fresh installation the camera works with no problem but when I restored my backup the problem returns with it.
Try going into the apps settings then clear all data for camera. Reboot phone before you open camera. This worked for me.
kingersj1 said:
Try going into the apps settings then clear all data for camera. Reboot phone before you open camera. This worked for me.
Click to expand...
Click to collapse
Tried that too. No success
I decided to do a fully clean rom installation, my backup is ready already, I'm just waiting for the next nightly.
Hi guys,
I have installed Android 10 Beta 1 on my op6, all the sensors stop working after the phone rooted.
I tried uninstall magisk,and all the sensors go back normal after a reboot.
Both magisk V19.4 and V20.0 had been tried.
Any idea?
Thank you very much.
You should reboot twice or a factory reset if the First solution doesnt work.
Q has sensors off feature, it might have been turned on by some mistake,
Go to developer options, quick settings developer tiles, tick "Sensors off" option, you'll see new unremovable tile, change it's status several times & see.
Good luck
Thank you all guys.
I reseted everything in twrp.
Root and sensors are all working now.
Thank you.
For me, also all sensors are not working after updating to Android 10 open beta 1, even without root.
I already tried flashing it again and cleared cache, but it didn't help.
Is there anything else I can try to get sensors working again without resetting everything?
Bleuzen said:
For me, also all sensors are not working after updating to Android 10 open beta 1, even without root.
I already tried flashing it again and cleared cache, but it didn't help.
Is there anything else I can try to get sensors working again without resetting everything?
Click to expand...
Click to collapse
For me, I have to reboot few times ( lost count of how many times I have rebooted ) until the sensor is working again.
It's not permanent fix though, another reboot could make the sensors stop working.
I've another problem that a smiley in the Notification only appears as "?". Is happens also in Chrome with some symbols
I fixed it by uninstalling Magisk via TWRP (there's now an easy guide to install it in Android 10), rebooting to system, check if the sensors are working again, and then reinstalling Magisk through TWRP again. If this happens again just re-do the procedure, an update will probably fix this.
How weird ô.O
Magisk v20, rebooted multiple times, nothing worked :|
I just reboot one more time while reading this post ... it works ...
Martuzki said:
I've another problem that a smiley in the Notification only appears as "?". Is happens also in Chrome with some symbols
Click to expand...
Click to collapse
The fonts problem.
The size of some fonts became 0 byte.
Try to reinstall the fonts or reinstall the rom .
stormPremier said:
How weird ô.O
Magisk v20, rebooted multiple times, nothing worked :|
I just reboot one more time while reading this post ... it works ...
Click to expand...
Click to collapse
It seems that the V20 is not compatible with android 10.
I installed v19.4 instead.
Kluxe Nobody said:
I fixed it by uninstalling Magisk via TWRP (there's now an easy guide to install it in Android 10), rebooting to system, check if the sensors are working again, and then reinstalling Magisk through TWRP again. If this happens again just re-do the procedure, an update will probably fix this.
Click to expand...
Click to collapse
Yes,after uninstall magisk all sensors are working again.
I need both root and sensor. So I try to reset the phone .
For all you people with the sensors issue. Install magisk 20.1 that'll fix this issue
thewhitehathacker said:
For all you people with the sensors issue. Install magisk 20.1 that'll fix this issue
Click to expand...
Click to collapse
Updated but not working here...
marcioafoliveira said:
Updated but not working here...
Click to expand...
Click to collapse
Try installing the rom again and try