OnePlus 6 Android 10 Beta 1:all sensor dead after root - OnePlus 6 Questions & Answers

Hi guys,
I have installed Android 10 Beta 1 on my op6, all the sensors stop working after the phone rooted.
I tried uninstall magisk,and all the sensors go back normal after a reboot.
Both magisk V19.4 and V20.0 had been tried.
Any idea?
Thank you very much.

You should reboot twice or a factory reset if the First solution doesnt work.

Q has sensors off feature, it might have been turned on by some mistake,
Go to developer options, quick settings developer tiles, tick "Sensors off" option, you'll see new unremovable tile, change it's status several times & see.
Good luck

Thank you all guys.
I reseted everything in twrp.
Root and sensors are all working now.
Thank you.

For me, also all sensors are not working after updating to Android 10 open beta 1, even without root.
I already tried flashing it again and cleared cache, but it didn't help.
Is there anything else I can try to get sensors working again without resetting everything?

Bleuzen said:
For me, also all sensors are not working after updating to Android 10 open beta 1, even without root.
I already tried flashing it again and cleared cache, but it didn't help.
Is there anything else I can try to get sensors working again without resetting everything?
Click to expand...
Click to collapse
For me, I have to reboot few times ( lost count of how many times I have rebooted ) until the sensor is working again.
It's not permanent fix though, another reboot could make the sensors stop working.

I've another problem that a smiley in the Notification only appears as "?". Is happens also in Chrome with some symbols

I fixed it by uninstalling Magisk via TWRP (there's now an easy guide to install it in Android 10), rebooting to system, check if the sensors are working again, and then reinstalling Magisk through TWRP again. If this happens again just re-do the procedure, an update will probably fix this.

How weird ô.O
Magisk v20, rebooted multiple times, nothing worked :|
I just reboot one more time while reading this post ... it works ...

Martuzki said:
I've another problem that a smiley in the Notification only appears as "?". Is happens also in Chrome with some symbols
Click to expand...
Click to collapse
The fonts problem.
The size of some fonts became 0 byte.
Try to reinstall the fonts or reinstall the rom .

stormPremier said:
How weird ô.O
Magisk v20, rebooted multiple times, nothing worked :|
I just reboot one more time while reading this post ... it works ...
Click to expand...
Click to collapse
It seems that the V20 is not compatible with android 10.
I installed v19.4 instead.

Kluxe Nobody said:
I fixed it by uninstalling Magisk via TWRP (there's now an easy guide to install it in Android 10), rebooting to system, check if the sensors are working again, and then reinstalling Magisk through TWRP again. If this happens again just re-do the procedure, an update will probably fix this.
Click to expand...
Click to collapse
Yes,after uninstall magisk all sensors are working again.
I need both root and sensor. So I try to reset the phone .

For all you people with the sensors issue. Install magisk 20.1 that'll fix this issue

thewhitehathacker said:
For all you people with the sensors issue. Install magisk 20.1 that'll fix this issue
Click to expand...
Click to collapse
Updated but not working here...

marcioafoliveira said:
Updated but not working here...
Click to expand...
Click to collapse
Try installing the rom again and try

Related

[Q] Lollipop 5.0 camera not working?

After updating my Nexus to 5.0, the camera worked fine for a couple of weeks. However, starting from a few days ago, when I open my camera app, it won't function at all; instead, all I get is the screen shown in the screenshot.
I'm afraid that's all I can really explain about this problem, as I can't think of any other relevant details.
Thanks in advance.
Beplexor said:
After updating my Nexus to 5.0, the camera worked fine for a couple of weeks. However, starting from a few days ago, when I open my camera app, it won't function at all; instead, all I get is the screen shown in the screenshot.
I'm afraid that's all I can really explain about this problem, as I can't think of any other relevant details.
Thanks in advance.
Click to expand...
Click to collapse
Have you tried rebooting your device ?
MrFishiz said:
Have you tried rebooting your device ?
Click to expand...
Click to collapse
Of course, I tried it twice.
Guess what though? After reading your post, I decided to try it again just for the sake of it, and it works now...Thanks for the solution haha?
Beplexor said:
Of course, I tried it twice.
Guess what though? After reading your post, I decided to try it again just for the sake of it, and it works now...Thanks for the solution haha?
Click to expand...
Click to collapse
Sometimes I get this annoying message when I try to access the camera, it says " Cannot connect to the camera " so what I usually do is reboot my device and then everything works again aha.
Glad it sorted itself out.
Same problem. Rebooted 4 times. Cleared cache. Still no camera
I have the same issue, tried the following
Reboot
Clear camera data
Reboot
Clear device cache
Reboot in safe mode
Reboot
None of that worked.
Tempted to try a new ROM and go from stock 5.0.0... See if that helps
I'm on stock rooted 5.0 and I have gotten this issue multiple times. Multiple reboots fix it temporarily but I can't figure out what actually triggers the issue.
I rarely use the flashlight pulldown, and haven't at all during the last few reboot cycles that this has still happened.

Xposed Issue/Question

Hello all. I'll try to explain my issue with as much detail and hopefully somebody can help me.
Anyways I picked this phone up on sale on amazon and I have already unlocked the bootloader and am successfully rooted. Now I want to use Xposed. I have been trying to get it to work for 2 days now and I am fed up.
I downloaded the correct Xposed installer(SDK 24 v88.2) and it will somewhat work but then after a reboot It says it's installed but not active and it tells me to check the logs of which are blank. I am rooted the supersu way and have twrp installed.
I've read about some script I can put in the init.d folder or something like that but I cannot seem to get it to work.
I am on emui 5.0 with android 7.0.
Can someone please for the life of me help me get this to work?
I'm simply trying to use a module for my Snapchat called snaptools.
I know it's a lot to ask but can someone please help with a tutorial or a fix/instructions?
Unluckily I'm facing the same issue on my phone without having found a solution yet, both by official or systemless Xposed versions, the result is always the same as yours; Xposed framework looks installed but deactivated after some reboots, and it stays like that until i completely remove it and reinstall it again. Then, after other 2 reboots or something like that, it gets deactivated again and again. I already tried to look for a fix on official systemless Xposed thread as you can see here from an old post of mine https://forum.xda-developers.com/showpost.php?p=74439953&postcount=5740 but even trying other Xposed Installer versions (official, topjohnwu's, dvdandroid's one...) or without using Greenify4Magisk module, the issue persists. I thought I was the only one facing this lol. I'm rooted with Magisk, so the issue must be something else than the SU manager used. Can i ask you if you have Greenify installed on your device? I have to tighten the circle of possible causes of this, because it's getting me mad.
RedSkull23 said:
Unluckily I'm facing the same issue on my phone without having found a solution yet, both by official or systemless Xposed versions, the result is always the same as yours; Xposed framework looks installed but deactivated after some reboots, and it stays like that until i completely remove it and reinstall it again. Then, after other 2 reboots or something like that, it gets deactivated again and again. I already tried to look for a fix on official systemless Xposed thread as you can see here from an old post of mine https://forum.xda-developers.com/showpost.php?p=74439953&postcount=5740 but even trying other Xposed Installer versions (official, topjohnwu's, dvdandroid's one...) or without using Greenify4Magisk module, the issue persists. I thought I was the only one facing this lol. I'm rooted with Magisk, so the issue must be something else than the SU manager used. Can i ask you if you have Greenify installed on your device? I have to tighten the circle of possible causes of this, because it's getting me mad.
Click to expand...
Click to collapse
I do not have greenify installed unfortunately. I literally got this phone 2 days ago and I've never had this issue before.
I just uninstalled the SuperSU version and Installed the magisk version for root and then installed Xposed through the magisk manager and installed the modified Xposed installer apk that can see the systemless install. Xposed has survived a couple reboots and my modules are working but I fear that it will stop working as you stated before randomly. Have you tried it my way?
Flash magisk v14 through TWRP and then install Xposed SDK 24 systemless through the magisk manager. And then installed the modified APK for Xposed installer. It's at least made it further than the normal Xposed install.
Edit: Since I've posted this I have survived 2 more restarts. I feel like I'm playing Russian roulette Everytime I restart it but so far so good.
patrick8996 said:
Flash magisk v14 through TWRP and then install Xposed SDK 24 systemless through the magisk manager. And then installed the modified APK for Xposed installer. It's at least made it further than the normal Xposed install.
Edit: Since I've posted this I have survived 2 more restarts. I feel like I'm playing Russian roulette Everytime I restart it but so far so good.
Click to expand...
Click to collapse
Ok so greenify isn't a cause of this issue... yes i tried it already, read my post above... Both by official by rovo89, and systemless by topjohnwu (with related installer obviously) the issue persists. It works, like the other one, but after some reboots (i reboot my phone once a day, at least) i find it deactivated. Yeah you said well, it's a Russian roulette ahahah i tried every version of Xposed practically...
RedSkull23 said:
Ok so greenify isn't a cause of this issue... yes i tried it already, read my post above... Both by official by rovo89, and systemless by topjohnwu (with related installer obviously) the issue persists. It works, like the other one, but after some reboots (i reboot my phone once a day, at least) i find it deactivated. Yeah you said well, it's a Russian roulette ahahah i tried every version of Xposed practically...
Click to expand...
Click to collapse
Hmm I'm still active but I haven't restarted since I posted. I'm wondering why there isn't a more detailed thread regarding this as it seems a lot of people use this phone.
Maybe you can try fresh with magisk and the modified Xposed installer for straight systemless. I've had a hell of a lot more luck this way than I have through the regular install. It's survived 5 reboots so far. Have you tried just a soft reboot inside the Xposed installer? I mean I know it's not a full restart but it may maintain Xposed and keep it active.
Maybe because only a limited set of people are facing this. And maybe only some devices suffer this. I tried both, fresh installations of normal Xposed / systemless Xposed, both didn't survived after 2 or 3 normal reboots. Yes I always rebooted by Xposed Installer when it was installed, even because i can preserve on/off button the longest i can this way, but sometimes a soft reboot isn't sufficient to apply some modifications, so i rarely used them. I daily rebooted with normal reboots. I'll try when new versions will be available at this point, i tried actual builds for 2 weeks encountering always this error so I'm not motivated on trying them again
Hey @patrick8996 did you tried latest systemless Xposed, V89? It surely works much better than previous one, V88.2, it has already survived 5 reboots while activating various modules compatibility is definitely increased with this update, I hope the issue won't represent in future
RedSkull23 said:
Hey @patrick8996 did you tried latest systemless Xposed, V89? It surely works much better than previous one, V88.2, it has already survived 5 reboots while activating various modules compatibility is definitely increased with this update, I hope the issue won't represent in future
Click to expand...
Click to collapse
I just installed it last night and so far so good.
My lasts posts regarding v88.2 were proved incorrect because once I rebooted one more time it went back to not working. But this new update to v89 seems to be working. Hopefully all goes well.
patrick8996 said:
I just installed it last night and so far so good.
My lasts posts regarding v88.2 were proved incorrect because once I rebooted one more time it went back to not working. But this new update to v89 seems to be working. Hopefully all goes well.
Click to expand...
Click to collapse
Yeah this build survives always reboots, even after recovery boots... I'd declare this issue solved :victory:
RedSkull23 said:
Yeah this build survives always reboots, even after recovery boots... I'd declare this issue solved :victory:
Click to expand...
Click to collapse
I've had a weird issue that my module's randomly stopped working. I had to disable them all in the Xposed app and restart and then enable them and restart again. Not sure if you've had this issue. But it's not that big of an issue because as long as Xposed stays active after a reboot it's a simple fix.
patrick8996 said:
I've had a weird issue that my module's randomly stopped working. I had to disable them all in the Xposed app and restart and then enable them and restart again. Not sure if you've had this issue. But it's not that big of an issue because as long as Xposed stays active after a reboot it's a simple fix.
Click to expand...
Click to collapse
Never faced this. The framework keeps staying active actually
RedSkull23 said:
Never faced this. The framework keeps staying active actually
Click to expand...
Click to collapse
My Xposed stays active it's just my modules randomly stop working inside Xposed. So I have to disable all my modules reboot and then reenable them and reboot again.
I had issues last night with updating magisk. When I updated to v15 it took all my sound away on my device. I had to uninstall it and reflash v14 and everything went back to normal.
patrick8996 said:
My Xposed stays active it's just my modules randomly stop working inside Xposed. So I have to disable all my modules reboot and then reenable them and reboot again.
I had issues last night with updating magisk. When I updated to v15 it took all my sound away on my device. I had to uninstall it and reflash v14 and everything went back to normal.
Click to expand...
Click to collapse
V15.1 should fix everything. V15.0 was messing up thousands of phones
RedSkull23 said:
V15.1 should fix everything. V15.0 was messing up thousands of phones
Click to expand...
Click to collapse
Ya I installed 15.1 and no longer have any issues. I'm happy all has been working for this long
Sent from my BLN-L24 using Tapatalk

Phone randomly crash

Hello guys! First of all, sorry for my bad English.
Since this morning, my phone started crashing, and I don't know why. I didn't changed any module since yesterday and I've tried uninstalling magisk, changing kernel and so on, and nothing worked. The last thing that i wanna do is a factory reset so if somebody could figure out what is the problem based on this logcat that i did on the exact moment of the crash, it would be much appreciated!
Just go to paste ubuntu dot com and add /p/VyYQvpV72Q
itsmedigio said:
Hello guys! First of all, sorry for my bad English.
Since this morning, my phone started crashing, and I don't know why. I didn't changed any module since yesterday and I've tried uninstalling magisk, changing kernel and so on, and nothing worked. The last thing that i wanna do is a factory reset so if somebody could figure out what is the problem based on this logcat that i did on the exact moment of the crash, it would be much appreciated!
Just go to paste ubuntu dot com and add /p/VyYQvpV72Q
Click to expand...
Click to collapse
Could you provide more info? What rom and what version? Did you install an app before it started crashing?
Gionikva said:
Could you provide more info? What rom and what version? Did you install an app before it started crashing?
Click to expand...
Click to collapse
Running stock Oxygen Open Beta 9, with Blu Spark kernel and Magisk 18. At the moment, i'm reporting crashes opening facebook, gmail, SD Maid, root explorer, but it is very random, and i'm logging everything and the problem seems to be a NullPointerException at process com.android.server.am.OnePlusJankManager, but i still could not figure out what this process does. In standby mode it does not crash, tried playing brawlstars and works fine...
itsmedigio said:
Running stock Oxygen Open Beta 9, with Blu Spark kernel and Magisk 18. At the moment, i'm reporting crashes opening facebook, gmail, SD Maid, root explorer, but it is very random, and i'm logging everything and the problem seems to be a NullPointerException at process com.android.server.am.OnePlusJankManager, but i still could not figure out what this process does. In standby mode it does not crash, tried playing brawlstars and works fine...
Click to expand...
Click to collapse
What the hell, now i've tried with SD Maid a full cleanup, it removed about 3 Gb of junk and seems to be working fine!
same happens to me.
I'm on the same version (Oxygen Open Beta 9), but with stock kernel and no root at all.
I couldn't figure out a way to fix that yet
Same problem here since today.. Llast version of Oxygen OS, random crashes.
Phone goes black then ask my pin. Was about to do a factory reset but I don't know if this will be usefull. :/
I was in open beta 9 also when this problem started yesterday, I had to do factory reset and I installed the stable version 9.0.2 I had to install my applications all over again
WrathChild08 said:
Same problem here since today.. Llast version of Oxygen OS, random crashes.
Phone goes black then ask my pin. Was about to do a factory reset but I don't know if this will be usefull. :/
Click to expand...
Click to collapse
same thing for me too, since yesterday!!!! i did a factory reset, but i am also returning my OP6
lover said:
same thing for me too, since yesterday!!!! i did a factory reset, but i am also returning my OP6
Click to expand...
Click to collapse
Open Beta 9?
renatoknot said:
Open Beta 9?
Click to expand...
Click to collapse
yes
---------- Post added at 11:56 AM ---------- Previous post was at 11:53 AM ----------
same problem people have but different kernels and even on Oreo
https://amp.reddit.com/r/oneplus/comments/a2zfjt/oneplus_6_keeps_crashing_and_restarting/
https://forum.xda-developers.com/oneplus-6/help/random-crashes-5-1-8-t3811969
https://forum.xda-developers.com/oneplus-6/help/random-freeze-reboot-t3831268
https://forum.xda-developers.com/oneplus-6/help/random-soft-reboots-oos-9-0-t3847814
https://forum.xda-developers.com/oneplus-6/help/sign-9-0-3-kepp-gettin-random-reboots-t3874940
lover said:
yes
---------- Post added at 11:56 AM ---------- Previous post was at 11:53 AM ----------
same problem people have but different kernels and even on Oreo
https://amp.reddit.com/r/oneplus/comments/a2zfjt/oneplus_6_keeps_crashing_and_restarting/
https://forum.xda-developers.com/oneplus-6/help/random-crashes-5-1-8-t3811969
https://forum.xda-developers.com/oneplus-6/help/random-freeze-reboot-t3831268
https://forum.xda-developers.com/oneplus-6/help/random-soft-reboots-oos-9-0-t3847814
https://forum.xda-developers.com/oneplus-6/help/sign-9-0-3-kepp-gettin-random-reboots-t3874940
Click to expand...
Click to collapse
I went to the stable version and gave hard reset and solved ..... just try the hard reset and see what it gives
As I said, after I did a cleanup with sd maid my phone stopped crashing, but after a few days again it started to crash, and once again I did a cleanup and seems to be fixed. But I don't know why this happens
How many Rom updates did you have without factory reset?
itsmedigio said:
Hello guys! First of all, sorry for my bad English.
Since this morning, my phone started crashing, and I don't know why. I didn't changed any module since yesterday and I've tried uninstalling magisk, changing kernel and so on, and nothing worked. The last thing that i wanna do is a factory reset so if somebody could figure out what is the problem based on this logcat that i did on the exact moment of the crash, it would be much appreciated!
Just go to paste ubuntu dot com and add /p/VyYQvpV72Q
Click to expand...
Click to collapse
Sent from my ONEPLUS A6003 using Tapatalk
Only one update from beta 9 to 10 because i did a fresh installation via Fastboot after I tried to install MIUI. And anyways, I still had experienced crashes before. I also tried debloat with a script but nothing. For now it works just fine, but it's very random. I can't replicate the problem now, but maybe in a few days it will start again, and all I can see is crash at jankmanager (I see a lot of logs of that crash into /data/system/dropbox)

Rotation and many other thing are not working on android 10

Hi folks,
I've just updated my one plus 6 to android 10 and I already have many problems. The rotation and the automatic brightness are not working anymore. Plus, when you try to put your phone near your ear to listen to an audio message on WhatsApp is not working as well. Am I the only one with these problems?
Thanks
Same here.
Is this a bug or did I something wrong?
mine worked perfectly fine. but i find some issues where when i type on my keyboard it's little bit laggy. that's bother me a lot. so i had to soft reboot it
I get the same issues.. I'd fixed with factory reset, now everything works fine
I wasn't getting notifications of missed calls so factory reset. Then I couldn't access my contacts with the message saying something like, you haven't given all permissions. I downloaded another call app and gave all permissions. It worked fine, so I deleted it and gave all permissions to the OnePlus phone app (including location which I'm sure I never had to give previous). It now works...
rrubio999 said:
I get the same issues.. I'd fixed with factory reset, now everything works fine
Click to expand...
Click to collapse
Oh my... I don't want to do a factory reset ?
I fixed it by uninstalling Magisk via TWRP (there's now an easy guide to install it in Android 10), rebooting to system, check if the sensors are working again, and then reinstalling Magisk through TWRP again. If this happens again just re-do the procedure, an update will probably fix this.
my sensors went bad when first installing the open beta 30, but with a cache wipe in the recovery, everything should be back to normal again. Well, in my case it was so you should give it a shot as well
HighOnLinux said:
my sensors went bad when first installing the open beta 30, but with a cache wipe in the recovery, everything should be back to normal again. Well, in my case it was so you should give it a shot as well
Click to expand...
Click to collapse
I usally don't post comments on this forum but i would like to thank you. I had the same sensor issues since Android 10 and it really grinded my gears..
Just wiped cache from recovery and voila, the auto rotate works like a charm.
Thank you very much my friend and have a great day! :good:

'Unfortunately, that is unavailable with this device' - Assistant

Hey all,
Over the last few months, I haven't been able to get Google assistant to make phone calls or send text messages. All other functions work.
When I say, 'call my wife', or 'send text message to wife', it tells me that function is unavailable.
It used to work flawlessly.
I have changed nothing to cause it. I just woke up one morning and it didn't work.
So far I have tried:
-Factory reset
-clear cache, etc
-Magisk hide on assistant app, call manager, Google play services and google text to speech
I am on latest stable Oos with latest XxX Rom.
The issue started around 3 months ago.
Where should i be looking to fix this?
Thanks in advance for any help.
Does anyone know of any other forums I can post this question? I can't post in the OnePlus forums yet because of new member restrictions. I'm just trying to get more coverage for my issue so that I can get help solving it.
Do you know what day this happened?
spr33 said:
Do you know what day this happened?
Click to expand...
Click to collapse
I'm not sure. It was roughly 3 months ago.
cubic25 said:
Does anyone know of any other forums I can post this question? I can't post in the OnePlus forums yet because of new member restrictions. I'm just trying to get more coverage for my issue so that I can get help solving it.
Click to expand...
Click to collapse
Not sure but that happened to me too but here's what i did
1. Boot into twrp
2. Wipe system, vendor and cache no need to wipe data unless you don't care losing your files DO NOT REBOOT
3. Flash latest oos either 9.0.9 or beta Q is up to you DO NOT REBOOT
4. Flash twrp REBOOT
You'll all set if you need root just flash magisk
Let me know if it worked for you
J0nhy said:
Not sure but that happened to me too but here's what i did
1. Boot into twrp
2. Wipe system, vendor and cache no need to wipe data unless you don't care losing your files
3. Flash latest oos either 9.0.9 or beta Q is up to you
4. Flash twrp
You'll all set if you need root just flash magisk
Let me know if it worked for you
Click to expand...
Click to collapse
I did all this on Sunday hoping that it would fix the issue. It hasn't.
Additional info: I have also just discovered that if I open the assistant app and type in 'call.........' or 'message........' , it says there is no app installed to perform that function.
J0nhy said:
Not sure but that happened to me too but here's what i did
1. Boot into twrp
2. Wipe system, vendor and cache no need to wipe data unless you don't care losing your files DO NOT REBOOT
3. Flash latest oos either 9.0.9 or beta Q is up to you DO NOT REBOOT
4. Flash twrp REBOOT
You'll all set if you need root just flash magisk
Let me know if it worked for you
Click to expand...
Click to collapse
Don't think this will be useful, this is an Assistant issue, reflashing the ROM probably won't help.
cubic25 said:
I did all this on Sunday hoping that it would fix the issue. It hasn't.
Additional info: I have also just discovered that if I open the assistant app and type in 'call.........' or 'message........' , it says there is no app installed to perform that function.
Click to expand...
Click to collapse
Can you check in the settings, under Apps, and Default Apps, if you correctly have a Phone app and an SMS app set as default ? Or maybe the Google App does not have the permissions it needs (Phone Calls and SMS permissions), you could also check that. This is probably a little thing like this, it's 99% sure it's an app or configuration issue.
Both apps are set as default and all apps have all permissions ticked.
I too have the issue and have tried several things with no luck.
I've also been experiencing this. It's been pretty frustrating when trying to use the assistant with android auto.
What ROM are you guys running? I wonder if there is any similarities between our devices.
cubic25 said:
What ROM are you guys running? I wonder if there is any similarities between our devices.
Click to expand...
Click to collapse
I'm on beta 28
Well today I installed Android Auto, I was also able to install Google speech to text and bam, I'm able to use Okay Google to text and call again.

Categories

Resources