Get it on Frija or Samfirm using the DBT CSC
Sent from my SM-T860 using Tapatalk
broncogr said:
Get it on Frija or Samfirm using the DBT CSC
Click to expand...
Click to collapse
What's that?
are tools to quick download stock firmware from samsung even if you are rooted. they work in windows. after downloading and rooting the firmware you can apply it with odin. more on google...
Inviato dal mio SM-N975F utilizzando Tapatalk
Or you can just download the firmware and flash it with odin using homeCSC and remain stock unrooted with data intact.
Sent from my SM-N975F using Tapatalk
Also available in Sammobile.com
Sent from my SM-N975F using Tapatalk
ASJ2 for CSC BRI is out.
broncogr said:
ASJ2 for CSC BRI is out.
Click to expand...
Click to collapse
November patch ?
broncogr said:
ASJ2 for CSC BRI is out.
Click to expand...
Click to collapse
Cool, then T865 should be out soon as well
m.
Brotuck said:
November patch ?
Click to expand...
Click to collapse
Still September
broncogr said:
Still September
Click to expand...
Click to collapse
Really?!? So what's new?
m.
T860OXM1ASK1 DBT CSC is out
November security patch
broncogr said:
T860OXM1ASK1 DBT CSC is out
November security patch
Click to expand...
Click to collapse
anything else in the changelog?
Ather said:
anything else in the changelog?
Click to expand...
Click to collapse
... the algorithm for the fingerprint scanner ....
m.
I's as bad as before....
Finger print sensor worked fine for me before the new firmware. Installed the new firmware and deleted finger prints. Now I try redo them and cannot get one to finish no matter what finger I try with.
Took the update and forgot i have not rooted my tablet yet ??*, did this patch block root?
Fingerprint Woes
nrage23 said:
Finger print sensor worked fine for me before the new firmware. Installed the new firmware and deleted finger prints. Now I try redo them and cannot get one to finish no matter what finger I try with.
Click to expand...
Click to collapse
I have the same issue. Fingerprint worked fine before the update. After, I deleted all fingerprints, and could not get it to complete adding a fingerprint. Finally got it to add one, but it usually fails to read it. Anyone else with this problem?
New Firmware out for T865/DBT with december patch
https://www.sammobile.com/samsung/galaxy-tab-s6/firmware/SM-T865/DBT/download/T865XXU2ASL3/306368/
T865XXU2ASL3 - https://doc.samsungmobile.com/SM-T865/DBT/doc.html
Above links are for T-865
Get the correct firmware from Frija or Samfirm using DBT CSC
Is the csc same as s10+? I mean if my device is xar can I install DBT.. etc (T860 wifi)
Related
Firmware - N9005XXUDMJ6 - SM-N9005
Device Name: Galaxy Note 3 (Snapdragon)
Model: SM-N9005
Region: BTU
Version: N9005XXUDMJ6
OS Version: 4.3
Build Date: 21.10.2013
Changelist: 1937874
http://hotfile.com/dl/252755700/c59a7ff/BTU-N9005XXUDMJ6-20131029224622.zip.html
radekklamzynski7 said:
Firmware - N9005XXUDMJ6 - SM-N9005
Device Name: Galaxy Note 3 (Snapdragon)
Model: SM-N9005
Region: BTU
Version: N9005XXUDMJ6
OS Version: 4.3
Build Date: 21.10.2013
Changelist: 1937874
http://hotfile.com/dl/252755700/c59a7ff/BTU-N9005XXUDMJ6-20131029224622.zip.html
Click to expand...
Click to collapse
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
noticeable change in relation to MJ3
radekklamzynski7 said:
noticeable change in relation to MJ3
Click to expand...
Click to collapse
This Rom BTU MJ6 have a multi csc_vers OXADMJ4 that have also the CSC XEO from Poland.
Worth flashing this? I just updated my phone over OTA and I have MJ3 atm.
ValenteL said:
This Rom BTU MJ6 have a multi csc_vers OXADMJ4 that have also the CSC XEO from Poland.
Click to expand...
Click to collapse
CSC stored in this ROM:
radekklamzynski7 said:
CSC stored in this ROM:
Click to expand...
Click to collapse
What tool is this "Preconfig" csc please?
ValenteL said:
What tool is this "Preconfig" csc please?
Click to expand...
Click to collapse
application from google play, nothing more, root required
https://play.google.com/store/search?q=csc%20select
:good:
My OTA just started now the download...
Is this update only changing the CSC? Haven't you seen any other difference?
Sent from my SM-N9005 using xda app-developers app
radekklamzynski7 said:
application from google play, nothing more, root required
https://play.google.com/store/search?q=csc%20select
Click to expand...
Click to collapse
Wow, well I know this but I never use, it wipe all my data.
Whit root, I prefer use Root Explorer and change on system/csc by manual mode. I have my own way.
Thanks
ValenteL said:
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
Click to expand...
Click to collapse
How do you flash it without bootloader?
I am running on MJ3 with the bootloader removed via the root de la vega thread. I want to upgrade to MJ6 however, i want to be able to remove the bootloader.
Hi guys, do you think i can flash German DBT firmware over this UK firmware with odin without any issues?
Sent from my SM-N9005 using xda app-developers app
Does anyone noticed with mj6 modem better signal or anything?
Sent from my SM-N9005 using Tapatalk
So it will remove my root if I install by Odin?
Sent from my SM-N9005 using XDA Premium 4 mobile app
arvin2212 said:
How do you flash it without bootloader?
I am running on MJ3 with the bootloader removed via the root de la vega thread. I want to upgrade to MJ6 however, i want to be able to remove the bootloader.
Click to expand...
Click to collapse
I use this TOOL, I manage the Rom at end I have only 7 files on it.
ValenteL said:
I use this TOOL, I manage the Rom at end I have only 7 files on it.
Click to expand...
Click to collapse
Thanks for your answer ... but which 7 files (12 in the tar)?
Originally Posted by ValenteL-->
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
Click to expand...
Click to collapse
LIPA said:
Thanks for your answer ... but which 7 files (12 in the tar)?
Click to expand...
Click to collapse
Don't make like me. I had bad boot's whit MJ6 and bootloader MJ3.
I made a Bootloader-MJ6.tar.md5 whit that TOOL, the 5 files from it, flashed by Odin and now whit Bootloader N9005XXUDMJ6 no more bad boot's.
Conclusion: A Rom must work whit your own bootloader.
Forget my test's please.
ValenteL said:
Don't make like me. I had bad boot's whit MJ6 and bootloader MJ3.
I made a Bootloader-MJ6.tar.md5 whit that TOOL, the 5 files from it, flashed by Odin and now whit Bootloader N9005XXUDMJ6 no more bad boot's.
Conclusion: A Rom must work whit your own bootloader.
Forget my test's please.
Click to expand...
Click to collapse
What do you mean by "bad boot" as all was OK on your 1st post on this thread ??
I don't understand your conclusion also
geek78 said:
What do you mean by "bad boot" as all was OK on your 1st post on this thread ??
I don't understand your conclusion also
Click to expand...
Click to collapse
At start the phone stop at samy logo, wait, wait, wait, poweroff/on, start, the same wait... sometimes start at 3º power on.
Whit the bootloader from Rom XXUDMJ6 it start quickly at first time. It's all Jean-Paul. You are French?
About my conclusion You must read this:
http://www.samsung.com/global/business/mobile/solution/security/samsung-knox
and:
https://www.samsungknox.com/overview/technical-details
Thanks. Sometimes bootloader can't work with some baseband. Maybe if you don't flash the new modem it works (even if it is not a good solution).
And yes I am french. But my father is from Maia and my mother from Braga
In Germany - using DBT version of 9005 bought over Amazon - the update weighs in as 395MB. Applying now, will report back with results.
Darn it took a LONG time!!
rfox said:
In Germany - using DBT version of 9005 bought over Amazon - the update weighs in as 395MB. Applying now, will report back with results.
Darn it took a LONG time!!
Click to expand...
Click to collapse
After Update - Version is XXUENA2 - but another update has started (this time 29MB) - will see what that brings . . .
Second update - XXUENB1 now
rfox said:
After Update - Version is XXUENA2 - but another update has started (this time 29MB) - will see what that brings . . .
Click to expand...
Click to collapse
After second update - the version is NB1. Will report back if there are problems . . .
Same by me, update started
Can u say what change log number it has?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Model:*SM-N9005
Model name:*Galaxy Note 3
Country:*Germany
Version:*Android 4.4.2
Changelist:*636608
Build date:*Wed, 12 Feb 2014 08:24:44 +0000
Product Code:*DBT
PDA:*N9005XXUENB4
CSC:*N9005DBTENB1
MODEM:*N9005XXUENB1
Gesendet von meinem SM-N9005 mit Tapatalk
dajumper said:
Can u say what change log number it has?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=25831
Gesendet von meinem SM-N9005
HSD-Pilot said:
http://www.sammobile.com/firmwares/3/?download=25831
Gesendet von meinem SM-N9005
Click to expand...
Click to collapse
anyone having an issue flashing this over the polish nb3?
jetbruceli said:
anyone having an issue flashing this over the polish nb3?
Click to expand...
Click to collapse
Yes I do! At the end of flashing of this over polish nb3 odin says "FAIL" and system size or something...
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
radicalisto said:
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
Click to expand...
Click to collapse
yes but I was able to flash between PHN and OXX without any issue, why is this DBT being so fickle
Could be any number of reasons, size might be a few kb's smaller or bigger than another build. - built on a different computer etc etc
better wait it out for PHN NB4 then...
alexcarterkarsus said:
Yes I do! At the end of flashing of this over polish nb3 odin says "FAIL" and system size or something...
Click to expand...
Click to collapse
radicalisto said:
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
Click to expand...
Click to collapse
Hey i got it to work this way,
I flashed the new firmware and once it failed I pulled the battery out then
restarted it went to download screen and then flashed cf autoroot since my knox is voided anyways and thats how I root to and it booted no problems!
Woo Hoo
but now have a samsung keyboard fc but I can flash a new one easy!
Tried to flash over polish ROM too - failed twice.
Ended up flashing back to Polish ROM - all good again.
I bet we going to have same problem now when BTU Drops.
jetbruceli said:
anyone having an issue flashing this over the polish nb3?
Click to expand...
Click to collapse
No problems here. Previously I was running DBT 4.3, then I flashed the first (official!) polish Kitkat. After NB3 came out I flashed that, all without Pit-File and the polish versions I flashed were the one-part firmwares, never the 3- or 4-part ones.
tl;dr: no problems flashing DBT-NB4 over my polish NB3, even reactivation lock was on.
Does anyone have a better mirror other than sammobile? The download there will take me 2 days!
Estoroth said:
No problems here. Previously I was running DBT 4.3, then I flashed the first (official!) polish Kitkat. After NB3 came out I flashed that, all without Pit-File and the polish versions I flashed were the one-part firmwares, never the 3- or 4-part ones.
tl;dr: no problems flashing DBT-NB4 over my polish NB3, even reactivation lock was on.
Click to expand...
Click to collapse
I was also using the single file polish rom. But this DBT would not take over it.
I might try odin 1.85 under pda.
snout said:
Tried to flash over polish ROM too - failed twice.
Ended up flashing back to Polish ROM - all good again.
I bet we going to have same problem now when BTU Drops.
Click to expand...
Click to collapse
Potentially yes. - a system wipe will fix it though.
snout said:
I was also using the single file polish rom. But this DBT would not take over it.
I might try odin 1.85 under pda.
Click to expand...
Click to collapse
So you've never flashed a pit file before? That's weird then.
I hope it'll work for you, good luck
Hi,
I haven't followed the forum in quite a while because I'm to busy.
I'm on Android 6, rooted and I'd like to update the easiest way, without loosing anything.
Could somebody walk me through, what I have to do? I would really appreciate that.
btw, I don't need root on Android 7 for the time being.
Thanks
Sent from my SM-G930F using Tapatalk
Just flash the latest Nougat 7.0 stock ROM for your model S7 from updato.com using ODIN 3.12.3 or newer
Use HOME_CSC instead of CSC to avoid a reset
CSC = Factory reset after flash
HOME_CSC = No reset
*Detection* said:
Just flash the latest Nougat 7.0 stock ROM for your model S7 from updato.com using ODIN 3.12.3 or newer
Use HOME_CSC instead of CSC to avoid a reset
CSC = Factory reset after flash
HOME_CSC = No reset
Click to expand...
Click to collapse
Hi thanks, that sounds promising. I have a doubt though.
First the updato.com webseite doesnt let my choose a model with any browser.
I went to Sammobile.com and found a couple of roms. Here it comes:
2017-08-24 Germany (Vodafone) 7 G930FXXU1DQH5 G930FVFG1DQH1 YES
2017-08-22 Germany (T-Mobile) 7 G930FXXU1DQH8 G930FDDX1DQF3 YES
2017-08-22 Germany (Congstar) 7 G930FXXU1DQH8 G930FDDX1DQF3
My CSC is XEG, but there are multiple CSCs in Germany:
Germany DBT, DTM, DUT, EPL, MAN, MBC, OXA*, VD2, VIA, XEG
How do i determíne which , if any is XEG. Could i flash the stock rom somehow without flash the CSC, keeping the old one? Or can i get the CSC from another source?
thank you so much,
nearly
Sorry, forget it. Just found one.
nearlygod said:
Sorry, forget it. Just found one.
Click to expand...
Click to collapse
samfirm tool will get you the latest a lot quicker than sammobile will
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
If your CSC is XEG and the firmware is a Multi-CSC containing XEG just grab that one
*Detection* said:
samfirm tool will get you the latest a lot quicker than sammobile will
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
If your CSC is XEG and the firmware is a Multi-CSC containing XEG just grab that one
Click to expand...
Click to collapse
unfortunately sammobile is in server maintenance for another days. bad luck
Sent from my SM-G930F using Tapatalk
nearlygod said:
unfortunately sammobile is in server maintenance for another days. bad luck
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?record=F56225D445ED11E7963AFA163EE8F90B
Just updated today. File size 242mb stating camera and something else stability improvement.
Exynos variant. Uk
Anyone else?
lawtq said:
Just updated today. File size 242mb stating camera and something else stability improvement.
Exynos variant. Uk
Anyone else?
Click to expand...
Click to collapse
Me yesterday. Germany.
iamnotkurtcobain said:
Me yesterday. Germany.
Click to expand...
Click to collapse
Silly question but any difference? I don't know why I ask this as I never feel a difference lol
lawtq said:
Silly question but any difference? I don't know why I ask this as I never feel a difference lol
Click to expand...
Click to collapse
My device seems to run a little better. Also less heat. I think there was a bug in the first Firmware.
lawtq said:
Just updated today. File size 242mb stating camera and something else stability improvement.
Exynos variant. Uk
Anyone else?
Click to expand...
Click to collapse
Whats your software number post update?
exocetdj said:
Whats your software number post update?
Click to expand...
Click to collapse
Here it is
lawtq said:
Here it is
Click to expand...
Click to collapse
Just checked and flashed :good:
I have the oxm CSC no update here
skivnit said:
I have the oxm CSC no update here
Click to expand...
Click to collapse
Mines XEU/XEU/XEU
iamnotkurtcobain said:
Me yesterday. Germany.
Click to expand...
Click to collapse
weird, i got s9+ from o2 yesterday but no update so far.
Sent from my SM-G965F using Tapatalk
G965FXXU1ARC5 - SM-G965F XEU United Kingdom / Ireland is on Sammobile if anyone is interested.
I've got it stuck in my head that mentioning that site is taboo here, if it is please accept my apologies Mod's
ratsalad said:
G965FXXU1ARC5 - SM-G965F XEU United Kingdom / Ireland is on Sammobile if anyone is interested.
I've got it stuck in my head that mentioning that site is taboo here, if it is please accept my apologies Mod's
Click to expand...
Click to collapse
3.9Gb it seems!! Can't yet find it with SamFirm.
nothing here in the middle east
lawtq said:
Just updated today. File size 242mb stating camera and something else stability improvement.
Exynos variant. Uk
Anyone else?
Click to expand...
Click to collapse
Got it
Downloadable OXM files anyone?
JazonX said:
Downloadable OXM files anyone?
Click to expand...
Click to collapse
There isn't one otherwise you would have received the update as oxm ismulti csc
Can someone upload the update.zip file?
Here is ARC5, flashable through Odin.
Use HOME_CSC if you don't want to lose your data and if your current CSC is part of the OXM multi-CSC.
https://drive.google.com/file/d/1vYCYeoNm9DCW-Q1PfELNfRtnk32H1FqC/view
murtaza02 said:
Here is ARC5, flashable through Odin.
Use HOME_CSC if you don't want to lose your data and if your current CSC is part of the OXM multi-CSC.
https://drive.google.com/file/d/1vYCYeoNm9DCW-Q1PfELNfRtnk32H1FqC/view
Click to expand...
Click to collapse
Is this a legit copy? Google flags up possible virus? Might just be because the files so big?
MopHeadGeek said:
Is this a legit copy? Google flags up possible virus? Might just be because the files so big?
Click to expand...
Click to collapse
It's legit. Flashed on my phone.
Google flags big files as possible viruses because it can't scan them.
Hello There XDA !!!
Finally Official Pie is Out for DBT as DSBA so this thread is for ease to download Odin files/Update.zip
Note :- For SD CARD flashing Update.zip you need to be on Official Oreo CRLB January Patch (not beta)
Galaxy S8 [F/FD]
Update.zip :-
First update.zip (with february security patch) from Oreo to official Pie for DBT and all CSC from CSC-OXM (Multi-CSC).
Update.zip from G950FXXS4CRLB to G950FXXU4DSBA for SD card - https://cloud.mail.ru/public/Fiya/mgT7A4UgN
Odin :-
G950FXXU4DSBA - GALAXY S8 SM-G950F/FD
https://mega.nz/#!zIAjhQxa!tjK34ZCFm75ZcAPFCBR372iKWdlNc5MJ7E4D4vGgsL4
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/DBT/download/G950FXXU4DSBA/257870
https://samfrew.com/download/Galaxy__S8__/1w7i/DBT/G950FXXU4DSBA/G950FOXM4DSBA/
Click to expand...
Click to collapse
Galaxy S8+ [F/FD]
Update.zip :-
Soon...
Odin :-
G955FXXU4DSBA -GALAXY S8+ G955F/FD
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/DBT/download/G955FXXU4DSBA/257856/
https://samfrew.com/download/Galaxy__S8+__/h6mr/DBT/G955FXXU4DSBA/G955FOXM4DSBA/
Click to expand...
Click to collapse
Everyone is Welcome here to Post useful Links so that i can Update OP for you All...
Happy Pie :highfive:
CREDITS :-
@VIP1961 for update.zip for S8
@intratech for mega link
Click to expand...
Click to collapse
Life Companion said:
Hello There XDA !!!
Finally Official Pie is Out for DBT as DSBA so this thread is for ease to download Odin files/Update.zip
Galaxy S8 [F/FD]
Galaxy S8+ [F/FD]
Everyone is Welcome here to Post useful Links so that i can Update OP for you All...
Happy Pie :highfive:
Click to expand...
Click to collapse
Thanks for your contribution
PoochyXXX
Thanks dude!
G950FXXU4DSBA - GALAXY S8 SM-G950F (ODIN) :
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/DBT/download/G950FXXU4DSBA/257870/
Is it okay for me to flash it when I have a different CSC? I assume I can flash the Pie firmware later if it comes out for my CSC if I do anyway.
With this firmware it's possible to downgrade back to 8.0 with latest 8.0 firmware (not sure if reset is needed though).
benjamen50 said:
Is it okay for me to flash it when I have a different CSC? I assume I can flash the Pie firmware later if it comes out for my CSC if I do anyway.
With this firmware it's possible to downgrade back to 8.0 with latest 8.0 firmware (not sure if reset is needed though).
Click to expand...
Click to collapse
Yes you can flash because it is Multi CSC.
I have not tried downgrading yet mybe someone will confirm who hates PIE
lol @ sammobile trying to scam people out of 8.50€ for official firmware updates by limiting download speed to 15kb/s
What is DBT?
I installed beta 4 on my phone literally last night. Right now it's SB9, DSB9. Can I update to this and receive official updates directly on phone from Samsung India?
sonuyos said:
What is DBT?
I installed beta 4 on my phone literally last night. Right now it's SB9, DSB9. Can I update to this and receive official updates directly on phone from Samsung India?
Click to expand...
Click to collapse
DBT is Germany, Unlocked.
You will be on the Germany update train if you flash it.
Can I install update zip if I am already on beta 4 without problems?
DarkXLord20 said:
Can I install update zip if I am already on beta 4 without problems?
Click to expand...
Click to collapse
No you cannot. Update will only be possible from the latest Oreo firmware (DBT).
xploder270 said:
DBT is Germany, Unlocked.
You will be on the Germany update train if you flash it.
Click to expand...
Click to collapse
Ah, then if i want to go back to india, not possible?
sonuyos said:
Ah, then if i want to go back to india, not possible?
Click to expand...
Click to collapse
Sure, just flash a Firmware for India (INS I guess?) in Odin.
sonuyos said:
Ah, then if i want to go back to india, not possible?
Click to expand...
Click to collapse
Wait for sometime. It will be released in India around 23rd February.
xploder270 said:
Sure, just flash a Firmware for India (INS I guess?) in Odin.
Click to expand...
Click to collapse
Then will i get OTA?
Darshan50283 said:
Wait for sometime. It will be released in India around 23rd February.
Click to expand...
Click to collapse
Source?
sonuyos said:
Then will i get OTA?
Click to expand...
Click to collapse
Of course.
sonuyos said:
Then will i get OTA?
Source?
Click to expand...
Click to collapse
They release new updates every 8 days. Beta 3 was on 7th feb then beta 4 on 15 feb. So final update around 23rd feb
How can I update then don't have a pc
DarkXLord20 said:
How can I update then don't have a pc
Click to expand...
Click to collapse
You don't have a PC? Mobile devices are seldomly truly independent.
Get a PC.
Does anyone got a non sammobile link? 15kb/s is ridiculous.
SamFirm v0.3.6.0
Checking firmware for SM-G955F/DBT/G955FXXU4DSBA/G955FOXM4DSBA/G955FXXU4DSBA/G955FXXU4DSBA
Model: SM-G955F
Version: G955FXXU4DSBA/G955FOXM4DSBA/G955FXXU4DSBA/G955FXXU4DSBA
OS: Pie(Android 9)
Filename: SM-G955F_1_20190218091114_89ojni6upz_fac.zip.enc4
Size: 4055047568 bytes
LogicValue: oev2w8vlrw60om47