Database Info

[Notice] Samsung Updates just uploaded new S4 firmwares!

There's a ton of new regions, carriers, and firmwares now.
Give them a look here:
http://samsung-updates.com/device/?id=GT-I9500
http://samsung-updates.com/device/?id=GT-I9505

I was about to post about this.

smearing fix?

Sam Firmware has more ROMs available then Samsung-Updates.

Same change list though, so nothing new.

Obagleyfreer said:
Same change list though, so nothing new.
Click to expand...
Click to collapse
Not all. Germany already has an update with higher changelist.

MaKTaiL said:
Not all. Germany already has an update with higher changelist.
Click to expand...
Click to collapse
Really.... what's the firmware version?

Obagleyfreer said:
Really.... what's the firmware version?
Click to expand...
Click to collapse
It's the last one on the list. It's for the i9505 version. Germany.
http://samsung-updates.com/device/?id=GT-I9505
This is for Russia, i9500. The second last:
http://samsung-updates.com/device/?id=GT-I9500

MaKTaiL said:
It's the last one on the list. It's for the i9505 version. Germany.
http://samsung-updates.com/device/?id=GT-I9505
This is for Russia, i9500. The second last:
http://samsung-updates.com/device/?id=GT-I9500
Click to expand...
Click to collapse
The change list says: 431985, which is no higher than the previous versions.
EDIT: My bad!! I'm being dumb lol I was looking at the one at the top of the list.
You're totally right, higher change list
Fingers crossed it may fix the purple streaking, although I doubt it.

Obagleyfreer said:
The change list says: 431985, which is no higher than the previous versions.
Click to expand...
Click to collapse
Are you sure? I see 526204 here.
Sent from my GT-I9100 using xda premium

[update] col-al10 8.1.0.139(c00gt)

Anyone else got it?
I just changed to China region in HiCare, and got it.

Yes got it yesterday without changing anything.

Raikuna said:
Yes got it yesterday without changing anything.
Click to expand...
Click to collapse
On what country did you had it? and you have same version as me? COL-AL10 (C00)?
I just did it, no problems so far and i dont see any major changes.

Yes i have the same version as you and i did it in Germany with complete system in german.
Didnt see any major changes aswell.

No toItWith the HiSuite on Romania, it didnt find me anything. Just the suite was on china, the system was in english
Raikuna said:
Yes i have the same version as you and i did it in Germany with complete system in german.
Didnt see any major changes aswell.
Click to expand...
Click to collapse
Mine kinda gets a bit hot?how about yours?
Or its only in my head )

Raikuna said:
Yes got it yesterday without changing anything.
Click to expand...
Click to collapse
how is slow motion?? good like oneplus 6?
Sent from my COL-AL10 using Tapatalk

kooldude7285 said:
how is slow motion?? good like oneplus 6?
Click to expand...
Click to collapse
You are comparing 2 different phones with different camera technologies.

Garkan said:
Anyone else got it?
I just changed to China region in HiCare, and got it.
Click to expand...
Click to collapse
Hi, how did you change the region in China in HiSuite? Can you let me know?
Thanks

franky14 said:
Hi, how did you change the region in China in HiSuite? Can you let me know?
Thanks
Click to expand...
Click to collapse
Not in hisuite.. He changes region in hicare app. Which came preinstalled from honor.

hassanjavaid8181 said:
Not in hisuite.. He changes region in hicare app. Which came preinstalled from honor.
Click to expand...
Click to collapse
Thanks I changed to Hong Kong, didn't receive any update. I'll just wait it out.

franky14 said:
Thanks I changed to Hong Kong, didn't receive any update. I'll just wait it out.
Click to expand...
Click to collapse
Not hong kong, select the one above, full chinese leters, 4th one.

Garkan said:
Not hong kong, select the one above, full chinese leters, 4th one.
Click to expand...
Click to collapse
I changed to the one mentioned by you, still no update for me. Thanks for the reply tho.

franky14 said:
I changed to the one mentioned by you, still no update for me. Thanks for the reply tho.
Click to expand...
Click to collapse
One last thing, clear cache and data from hicare and try again. If its still not working, just wait it.

I bet he doesnt have AL but european device...

When I change the region to China, it does change but there is this popup displaying me to use "Huawei ID made in China" everytime I access hicare app.
Also, do I need to do anything else, except changing region on hicare?
Yes im on colal10

No, i just changed, entered hicare, went to update, and i got a chinese msg and selected the right option and then it went to the update window and told me that i got a new update.
I didnt have any problem with the huawei id. Mine is for Romania.

Garkan said:
No, i just changed, entered hicare, went to update, and i got a chinese msg and selected the right option and then it went to the update window and told me that i got a new update.
I didnt have any problem with the huawei id. Mine is for Romania.
Click to expand...
Click to collapse
Haha lucky you
I know you use wifi to download so I tried wifi but doesn't seem to have luck. Anyway how's the gpu turbo boost? Does it work as they boast about it?

fosterqaz11 said:
Haha lucky you
I know you use wifi to download so I tried wifi but doesn't seem to have luck. Anyway how's the gpu turbo boost? Does it work as they boast about it?
Click to expand...
Click to collapse
Yeah, he's lucky.
Will be interesting to know if the GPU turbo makes a difference.

franky14 said:
Yeah, he's lucky.
Will be interesting to know if the GPU turbo makes a difference.
Click to expand...
Click to collapse
Yeah I hope so.. Anyway somewhere I saw a snapshot but it was showing update file of 3 gb with gpu turbo . Weird!!
I wonder how Huawei fit the GPU update on 640 mb haha

mine had like 500mb ) maybe i am not that lucky
I didnt test it before so i cant give you any feedback, and to be onest i dont do gaming on my phone.

SM-T860 2BTF2 MULTI CSC OXM FIRMWARE OUT WIFi Version Only !!!!

Get it on Frija or Samfirm using the DBT CSC
Sent from my SM-T860 using Tapatalk

broncogr said:
Get it on Frija or Samfirm using the DBT CSC
Click to expand...
Click to collapse
What's that?

are tools to quick download stock firmware from samsung even if you are rooted. they work in windows. after downloading and rooting the firmware you can apply it with odin. more on google...
Inviato dal mio SM-N975F utilizzando Tapatalk

Or you can just download the firmware and flash it with odin using homeCSC and remain stock unrooted with data intact.
Sent from my SM-N975F using Tapatalk

Also available in Sammobile.com
Sent from my SM-N975F using Tapatalk

ASJ2 for CSC BRI is out.

broncogr said:
ASJ2 for CSC BRI is out.
Click to expand...
Click to collapse
November patch ?

broncogr said:
ASJ2 for CSC BRI is out.
Click to expand...
Click to collapse
Cool, then T865 should be out soon as well
m.

Brotuck said:
November patch ?
Click to expand...
Click to collapse
Still September

broncogr said:
Still September
Click to expand...
Click to collapse
Really?!? So what's new?
m.

T860OXM1ASK1 DBT CSC is out
November security patch

broncogr said:
T860OXM1ASK1 DBT CSC is out
November security patch
Click to expand...
Click to collapse
anything else in the changelog?

Ather said:
anything else in the changelog?
Click to expand...
Click to collapse
... the algorithm for the fingerprint scanner ....
m.

I's as bad as before....

Finger print sensor worked fine for me before the new firmware. Installed the new firmware and deleted finger prints. Now I try redo them and cannot get one to finish no matter what finger I try with.

Took the update and forgot i have not rooted my tablet yet ??*, did this patch block root?

Fingerprint Woes
nrage23 said:
Finger print sensor worked fine for me before the new firmware. Installed the new firmware and deleted finger prints. Now I try redo them and cannot get one to finish no matter what finger I try with.
Click to expand...
Click to collapse
I have the same issue. Fingerprint worked fine before the update. After, I deleted all fingerprints, and could not get it to complete adding a fingerprint. Finally got it to add one, but it usually fails to read it. Anyone else with this problem?

New Firmware out for T865/DBT with december patch
https://www.sammobile.com/samsung/galaxy-tab-s6/firmware/SM-T865/DBT/download/T865XXU2ASL3/306368/
T865XXU2ASL3 - https://doc.samsungmobile.com/SM-T865/DBT/doc.html

Above links are for T-865
Get the correct firmware from Frija or Samfirm using DBT CSC

Is the csc same as s10+? I mean if my device is xar can I install DBT.. etc (T860 wifi)

Does anyone have a stock firmware for the at&t sm-g955u

I have been unable to find one for the art version of the phone and the other stock firmwares don't work with it, anyone have one?

Killerofjustice said:
I have been unable to find one for the art version of the phone and the other stock firmwares don't work with it, anyone have one?
Click to expand...
Click to collapse
Frija software for windows can get all the latest

TheMadScientist said:
Frija software for windows can get all the latest
Click to expand...
Click to collapse
It says the att CSC code is not supported

Killerofjustice said:
I don't know the csc, frija requires the csc
Click to expand...
Click to collapse
Csc is att

TheMadScientist said:
Csc is att
Click to expand...
Click to collapse
It says it's not supported

Killerofjustice said:
It says it's not supported
Click to expand...
Click to collapse
I used a multi csc file on mine and it installed csc fur cricket which is att

General Thom Browne firmware

For any who want it I have found the Thom Browne firmware bootloader version 2. I wanted to share this for free because I have found so many websites that are actually charging money to download this firmware that they didn't even have a hand in creating. I hate when people seek to profit from something they don't really own. They got it free, and charge everyone else. I am gonna upload it to G Drive for any who want to try it out. Some say it's boring but it's pretty smooth if you ask me. No root so gotta make the best of things lol
Here it is uploaded to my GDrive
XAA-F711U1TBU2AUI4-20210929144401.zip
drive.google.com
Extract files and flash using Odin.
THIS VERSION IS ONLY FOR F711U OR F711U1 VARIANTS!!
U1 Firmware will update to October security patch.
UPDATE!! Here is the link for the F711B /F711N variants.
F711BTBU2AUI4_F711BOXT2AUI4_XSA.zip
drive.google.com

thanks so much, just a curiosity, what have to special this fw, vs other stock? for example mine's european stock fw
thx again

iaio72 said:
thanks so much, just a curiosity, what have to special this fw, vs other stock? for example mine's european stock fw
thx again
Click to expand...
Click to collapse
I just read this "Thom Browne edition with Thom Browne's exclusive ringing tones, notifications, lockscreen, always on display and the animation of venetian blinds when you turn phone off or on."

ok thanks again, but its not good for my flip 3
5g? i have european fw with september security patch

Yeah.. latest update is U2

sorry just one thing,
where i click for not erase my data, when flashing this fw, in odin?
thx

iaio72 said:
sorry just one thing,
where i click for not erase my data, when flashing this fw, in odin?
thx
Click to expand...
Click to collapse
This is only for the F711U and F711U1 variants. Double check your model number before you do anything. I believe using Home CSC instead of CSC retains data

I just got an update so now its on October security patch

Bryanpen77 said:
This is only for the F711U and F711U1 variants. Double check your model number before you do anything. I believe using Home CSC instead of CSC retains data
Click to expand...
Click to collapse
not is good for me, mine is sm-F711B
thx again

iaio72 said:
not is good for me, mine is sm-F711B
thx again
Click to expand...
Click to collapse
Hey my friend I found the firmware for your model if you like. I am downloading it now. Upload speed is a bit slow at my house but should be ready in a few hours

OP updated with international variant TB firmware

Alright, probably a stupid question... but it's been a long time since I've dealt with a Samsung phone. I've got the standard F711U1 variant and want to flash this firmware. I'm on the October patch already, assuming this can be flashed over top? This won't trip Knox right? Do I have to enable OEM unlocking to flash a stock firmware?

grimez said:
Alright, probably a stupid question... but it's been a long time since I've dealt with a Samsung phone. I've got the standard F711U1 variant and want to flash this firmware. I'm on the October patch already, assuming this can be flashed over top? This won't trip Knox right? Do I have to enable OEM unlocking to flash a stock firmware?
Click to expand...
Click to collapse
This can be flashed. Not on top per se but can be flashed. This has September patch but will update to October after you set it all up. Make a backup just in case. This won't trip Knox at all and no you don't have to enable oem unlocking since this is flashed in download mode. But its best to remove fingerprints, lock code and Google account before flashing

Worked like a charm! Just did a quick factory reset before hand and flashed. Thanks a ton!

Thanks, im going to try it. Hope it works for me. I see the csc code is from United Kigdom. wish it were multi. Mine is TPA

just flashed and it seems make no difference on my factory unlocked Z flip3. I wonder if i did anything wrong.

luisnica98 said:
Thanks, im going to try it. Hope it works for me. I see the csc code is from United Kigdom. wish it were multi. Mine is TPA
Click to expand...
Click to collapse
My mistake. It is OXM multi changer csc.

realdealchris said:
just flashed and it seems make no difference on my factory unlocked Z flip3. I wonder if i did anything wrong.
Click to expand...
Click to collapse
If you see the Thom Browne bootscreen and the theme when it boots up to the home screen then you got it right.

Bryanpen77 said:
If you see the Thom Browne bootscreen and the theme when it boots up to the home screen then you got it right.
Click to expand...
Click to collapse
Odin showed pass with green light but there no Them Browne theme and boot screen.
UPDATE: it works now! Thank you so much!

iaio72 said:
thanks so much, just a curiosity, what have to special this fw, vs other stock? for example mine's european stock fw
thx again
Click to expand...
Click to collapse
So far I havent found any thing interesting. Besides a wallpaper, and starting animation, a white theme,. The rest is the same. I dont know about performance. I just began to use it. In a couple of days I will notice the difference, if there is one. Anyway I dont intend to be ungrateful with bryanpen77