Database Info

[SM-N9005][Stock Official Firmwares] N9005XXUBMI7 - France (XEF) [26-09-13]

Samsung Galaxy Note 3 (SM-N9005) Stock Firmware Collection​
All stock firmwares are brought to you by SAMMobile.com​
Model: SM-N9005
Country: France
Version: Android 4.3
Changelist: 1628120
Build date: Wed, 11 Sep 2013 06:30:59 +0000
Product Code: XEF
PDA: N9005XXUBMI7
CSC: N9005OXXBMI4
MODEM: N9005XXUBMI6
DOWNLOAD: N9005XXUBMI7_N9005OXXBMI4_XEF.zip
Instructions For Flashing Firmware:
Extract the firmware (.ZIP File)
Download Odin from attachments below
Extract Odin ZIP file and open it
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
* = Depends on the firmware you downloaded
Click to expand...
Click to collapse
Follow Me On:-

- Reserved -

First firmware has been posted!

flash xef firmware
Hi
I Just want to know if flashing the official xef firmware will put binary counter to 1 or knox to 1? I have a n9005bogmi7 thanx

stephane34920 said:
Hi
I Just want to know if flashing the official xef firmware will put binary counter to 1 or knox to 1? I have a n9005bogmi7 thanx
Click to expand...
Click to collapse
I guess not but haven't tried since I get the OTA and you can get the latest from here too
http://live.samsung-updates.com/index.php?device=SM-N9005
http://forum.xda-developers.com/showthread.php?t=2474756
Note 3 from EE ==> Vanilla firmware
Sent from my SM-N9005 using XDA Premium 4 mobile app

jetbruceli said:
I guess not but haven't tried since I get the OTA and you can get the latest from here too
http://live.samsung-updates.com/index.php?device=SM-N9005
http://forum.xda-developers.com/showthread.php?t=2474756
Note 3 from EE ==> Vanilla firmware
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you very much for your answer. But i would like to be sure that flashing an official rom don't put binary counter to 1 nor knox to 1... I would like to have the xef version because the bog version have updates much later. . If updates gone. Sometimes they don't follow updates. Sorry for my English

stephane34920 said:
Thank you very much for your answer. But i would like to be sure that flashing an official rom don't put binary counter to 1 nor knox to 1... I would like to have the xef version because the bog version have updates much later. . If updates gone. Sometimes they don't follow updates. Sorry for my English
Click to expand...
Click to collapse
Well according to the post he flashed over his current firmware with different one and no Knox change or Binary count
Sent from my SM-N9005 using XDA Premium 4 mobile app

jetbruceli said:
Well according to the post he flashed over his current firmware with different one and no Knox change or Binary count
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I 'm sorry i haven't see the second link thank you very much...

No LTE mode on Note 3 n9005
Guys i dont see LTE on my Note 3, n9005. Only the rest of the modes and mine is the international version. And the everything is fine as i work for the network in my country.
Will i lock my device if i flash one of these ROMs cos of the region lock Samsung has implemented ?
Please advice...

Firmware - N9005XXUDMJ6 - U.K - SM-N9005

Firmware - N9005XXUDMJ6 - SM-N9005
Device Name: Galaxy Note 3 (Snapdragon)
Model: SM-N9005
Region: BTU
Version: N9005XXUDMJ6
OS Version: 4.3
Build Date: 21.10.2013
Changelist: 1937874
http://hotfile.com/dl/252755700/c59a7ff/BTU-N9005XXUDMJ6-20131029224622.zip.html

radekklamzynski7 said:
Firmware - N9005XXUDMJ6 - SM-N9005
Device Name: Galaxy Note 3 (Snapdragon)
Model: SM-N9005
Region: BTU
Version: N9005XXUDMJ6
OS Version: 4.3
Build Date: 21.10.2013
Changelist: 1937874
http://hotfile.com/dl/252755700/c59a7ff/BTU-N9005XXUDMJ6-20131029224622.zip.html
Click to expand...
Click to collapse
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].

noticeable change in relation to MJ3

radekklamzynski7 said:
noticeable change in relation to MJ3
Click to expand...
Click to collapse
This Rom BTU MJ6 have a multi csc_vers OXADMJ4 that have also the CSC XEO from Poland.

Worth flashing this? I just updated my phone over OTA and I have MJ3 atm.

ValenteL said:
This Rom BTU MJ6 have a multi csc_vers OXADMJ4 that have also the CSC XEO from Poland.
Click to expand...
Click to collapse
CSC stored in this ROM:

radekklamzynski7 said:
CSC stored in this ROM:
Click to expand...
Click to collapse
What tool is this "Preconfig" csc please?

ValenteL said:
What tool is this "Preconfig" csc please?
Click to expand...
Click to collapse
application from google play, nothing more, root required
https://play.google.com/store/search?q=csc%20select
:good:

My OTA just started now the download...
Is this update only changing the CSC? Haven't you seen any other difference?
Sent from my SM-N9005 using xda app-developers app

radekklamzynski7 said:
application from google play, nothing more, root required
https://play.google.com/store/search?q=csc%20select
Click to expand...
Click to collapse
Wow, well I know this but I never use, it wipe all my data.
Whit root, I prefer use Root Explorer and change on system/csc by manual mode. I have my own way.
Thanks

ValenteL said:
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
Click to expand...
Click to collapse
How do you flash it without bootloader?
I am running on MJ3 with the bootloader removed via the root de la vega thread. I want to upgrade to MJ6 however, i want to be able to remove the bootloader.

Hi guys, do you think i can flash German DBT firmware over this UK firmware with odin without any issues?
Sent from my SM-N9005 using xda app-developers app

Does anyone noticed with mj6 modem better signal or anything?
Sent from my SM-N9005 using Tapatalk

So it will remove my root if I install by Odin?
Sent from my SM-N9005 using XDA Premium 4 mobile app

arvin2212 said:
How do you flash it without bootloader?
I am running on MJ3 with the bootloader removed via the root de la vega thread. I want to upgrade to MJ6 however, i want to be able to remove the bootloader.
Click to expand...
Click to collapse
I use this TOOL, I manage the Rom at end I have only 7 files on it.

ValenteL said:
I use this TOOL, I manage the Rom at end I have only 7 files on it.
Click to expand...
Click to collapse
Thanks for your answer ... but which 7 files (12 in the tar)?

Originally Posted by ValenteL-->
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
Click to expand...
Click to collapse
LIPA said:
Thanks for your answer ... but which 7 files (12 in the tar)?
Click to expand...
Click to collapse
Don't make like me. I had bad boot's whit MJ6 and bootloader MJ3.
I made a Bootloader-MJ6.tar.md5 whit that TOOL, the 5 files from it, flashed by Odin and now whit Bootloader N9005XXUDMJ6 no more bad boot's.
Conclusion: A Rom must work whit your own bootloader.
Forget my test's please.

ValenteL said:
Don't make like me. I had bad boot's whit MJ6 and bootloader MJ3.
I made a Bootloader-MJ6.tar.md5 whit that TOOL, the 5 files from it, flashed by Odin and now whit Bootloader N9005XXUDMJ6 no more bad boot's.
Conclusion: A Rom must work whit your own bootloader.
Forget my test's please.
Click to expand...
Click to collapse
What do you mean by "bad boot" as all was OK on your 1st post on this thread ??
I don't understand your conclusion also

geek78 said:
What do you mean by "bad boot" as all was OK on your 1st post on this thread ??
I don't understand your conclusion also
Click to expand...
Click to collapse
At start the phone stop at samy logo, wait, wait, wait, poweroff/on, start, the same wait... sometimes start at 3º power on.
Whit the bootloader from Rom XXUDMJ6 it start quickly at first time. It's all Jean-Paul. You are French?
About my conclusion You must read this:
http://www.samsung.com/global/business/mobile/solution/security/samsung-knox
and:
https://www.samsungknox.com/overview/technical-details

Thanks. Sometimes bootloader can't work with some baseband. Maybe if you don't flash the new modem it works (even if it is not a good solution).
And yes I am french. But my father is from Maia and my mother from Braga

4.4.2 Kitkat DBT - OTA is FINALLY out!!!

In Germany - using DBT version of 9005 bought over Amazon - the update weighs in as 395MB. Applying now, will report back with results.
Darn it took a LONG time!!

rfox said:
In Germany - using DBT version of 9005 bought over Amazon - the update weighs in as 395MB. Applying now, will report back with results.
Darn it took a LONG time!!
Click to expand...
Click to collapse
After Update - Version is XXUENA2 - but another update has started (this time 29MB) - will see what that brings . . .

Second update - XXUENB1 now
rfox said:
After Update - Version is XXUENA2 - but another update has started (this time 29MB) - will see what that brings . . .
Click to expand...
Click to collapse
After second update - the version is NB1. Will report back if there are problems . . .

Same by me, update started

Can u say what change log number it has?
Sent from my SM-N9005 using XDA Premium 4 mobile app

Model:*SM-N9005
Model name:*Galaxy Note 3
Country:*Germany
Version:*Android 4.4.2
Changelist:*636608
Build date:*Wed, 12 Feb 2014 08:24:44 +0000
Product Code:*DBT
PDA:*N9005XXUENB4
CSC:*N9005DBTENB1
MODEM:*N9005XXUENB1
Gesendet von meinem SM-N9005 mit Tapatalk

dajumper said:
Can u say what change log number it has?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=25831
Gesendet von meinem SM-N9005

HSD-Pilot said:
http://www.sammobile.com/firmwares/3/?download=25831
Gesendet von meinem SM-N9005
Click to expand...
Click to collapse
anyone having an issue flashing this over the polish nb3?

jetbruceli said:
anyone having an issue flashing this over the polish nb3?
Click to expand...
Click to collapse
Yes I do! At the end of flashing of this over polish nb3 odin says "FAIL" and system size or something...

Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.

radicalisto said:
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
Click to expand...
Click to collapse
yes but I was able to flash between PHN and OXX without any issue, why is this DBT being so fickle

Could be any number of reasons, size might be a few kb's smaller or bigger than another build. - built on a different computer etc etc

better wait it out for PHN NB4 then...

alexcarterkarsus said:
Yes I do! At the end of flashing of this over polish nb3 odin says "FAIL" and system size or something...
Click to expand...
Click to collapse
radicalisto said:
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
Click to expand...
Click to collapse
Hey i got it to work this way,
I flashed the new firmware and once it failed I pulled the battery out then
restarted it went to download screen and then flashed cf autoroot since my knox is voided anyways and thats how I root to and it booted no problems!
Woo Hoo
but now have a samsung keyboard fc but I can flash a new one easy!

Tried to flash over polish ROM too - failed twice.
Ended up flashing back to Polish ROM - all good again.
I bet we going to have same problem now when BTU Drops.

jetbruceli said:
anyone having an issue flashing this over the polish nb3?
Click to expand...
Click to collapse
No problems here. Previously I was running DBT 4.3, then I flashed the first (official!) polish Kitkat. After NB3 came out I flashed that, all without Pit-File and the polish versions I flashed were the one-part firmwares, never the 3- or 4-part ones.
tl;dr: no problems flashing DBT-NB4 over my polish NB3, even reactivation lock was on.

Does anyone have a better mirror other than sammobile? The download there will take me 2 days!

Estoroth said:
No problems here. Previously I was running DBT 4.3, then I flashed the first (official!) polish Kitkat. After NB3 came out I flashed that, all without Pit-File and the polish versions I flashed were the one-part firmwares, never the 3- or 4-part ones.
tl;dr: no problems flashing DBT-NB4 over my polish NB3, even reactivation lock was on.
Click to expand...
Click to collapse
I was also using the single file polish rom. But this DBT would not take over it.
I might try odin 1.85 under pda.

snout said:
Tried to flash over polish ROM too - failed twice.
Ended up flashing back to Polish ROM - all good again.
I bet we going to have same problem now when BTU Drops.
Click to expand...
Click to collapse
Potentially yes. - a system wipe will fix it though.

snout said:
I was also using the single file polish rom. But this DBT would not take over it.
I might try odin 1.85 under pda.
Click to expand...
Click to collapse
So you've never flashed a pit file before? That's weird then.
I hope it'll work for you, good luck

[ODIN] Official stock firmware / U firmware [SM-G935V]

* Here are some links to download the firmware from other sources since I don't own the device anymore. *
Updato for Verizon
Updato for U
SamFirm quickly downloading the most recent version for your device:Here
Just scroll to the bottom of the OP of SamFirm and download the most recent version of the tool.
1: Download the file and extract contents.
1A: Make sure you have the drivers properly installed!
2: Place the BL file in the BL slot, AP file in the AP slot, CP in the CP slot, and CSC in the CSC slot and wait for it to verify the files.
3:Turn off phone and reboot into download mode (volume down, home and power button) then plug into computer.
4:Click start and wait for it to finish.
After this you should be on the latest release.
Red= Verizon
Blue= U firmware
Verizon Firmware:
G935VVRU4BQA2_G935VVZW4BQA2
MD5: ab3437fcc1a8931a6e9a7c683064c7d2
G935VVRU4BQA4_G935VVZW4BQA4
MD5: a22c0ed08487582fc9d3e3767d5c3976
G935VVRU4BQC5_G935VVZW4BQC5
MD5: 127a778b2cf2c291b86b968730a2787e
G935VVRS4BQC9_G935VVZW4BQC9
MD5: 3dac45c68360689767bd4c61ccd40b96
G935VVRU4BQF2_G935VVZW4BQF2
MD5: 290c74e7fe86f1419d7f8de44342866d
U Firmware:
G935UUES4AQC1_G935UOYM4AQC1
*This is not "N" Firmware.*
MD5: 8aeb1e3be66f18f8b1947521a0e4da70
------N Firmware from here down------
G935UUEU4BQD2_G935UOYM4BQD2
MD5:1c8ab9e9e1839a46c6521b150d6aaf50
G935UUEU4BQF3_G935UOYM4BQF3
MD5: 924e83c2224762cf477f4e11e451580f
Thread with tools, drivers, and other stock firmware is here.
For those who are having issues with Odin use this version. It is the PrinceComsy version.

Is this official Verizon Stock Firmware? (Not Beta?) And can it be rooted?

RBThompsonV said:
Is this official Verizon Stock Firmware? (Not Beta?) And can it be rooted?
Click to expand...
Click to collapse
Yes it's the official one.
Should be rootable using jrkruse's method.

I have the T-Mobile firmware and Verizon 6.0 CSC installed. Can I just flash the CSC file from this firmware?
Sent from my SM-G935T using Tapatalk

zimgir124 said:
Yes it's the official one.
Should be rootable using jrkruse's method.
Click to expand...
Click to collapse
It is bootable via Jkruse method.
Thanks for the reply!

Can you flash back to mm?

thanks man @zimgir124

junear said:
I have the T-Mobile firmware and Verizon 6.0 CSC installed. Can I just flash the CSC file from this firmware?
Click to expand...
Click to collapse
I'm not sure.
If you already have it running why reflash it?

xdathekilljoy said:
Can you flash back to mm?
Click to expand...
Click to collapse
Should be able to

zimgir124 said:
I'm not sure.
If you already have it running why reflash it?
Click to expand...
Click to collapse
I was having fewer bars in the t mob rom. Installing the entire Verizon stock gives one more bar, but no Samsung cloud
Sent from my SM-G935V using Tapatalk

zimgir124 said:
Should be able to
Click to expand...
Click to collapse
I figured since it didn't say didn't mean you couldn't but those are not the things I feel I should dive into based on assumption

Hello,
Does anybody have a link to the Odin version that fixes the SHA256 failure error? I am attempting to flash the latest T-Mobile firmware to my current ATT S7. Thank in advance.

robf said:
Hello,
Does anybody have a link to the Odin version that fixes the SHA256 failure error? I am attempting to flash the latest T-Mobile firmware to my current ATT S7. Thank in advance.
Click to expand...
Click to collapse
I don't have the link, but if you search XDA for "odin prince comsy" you should be able to find it.

I'm ruining 935U fw and loving battery life. How's nugget battery life?
Sent from my SM-G935U using Tapatalk

liquidraven said:
I'm ruining 935U fw and loving battery life. How's nugget battery life?
Click to expand...
Click to collapse
It's good. 8-10 hours with light usage.

John.C01 said:
It's good. 8-10 hours with light usage.
Click to expand...
Click to collapse
Thanks
Sent from my SM-G935U using Tapatalk

Can I install this directly over the Galaxy Beta? I only took the 1st beta and have had great success with it

junear said:
I have the T-Mobile firmware and Verizon 6.0 CSC installed. Can I just flash the CSC file from this firmware?
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
had the same setup and installed this and works fine. It automatically wipes everything anyway

tattooz305 said:
Can I install this directly over the Galaxy Beta? I only took the 1st beta and have had great success with it
Click to expand...
Click to collapse
Should be able to.

How is this running? Same as Beta or better?

SM-T860 2BTF2 MULTI CSC OXM FIRMWARE OUT WIFi Version Only !!!!

Get it on Frija or Samfirm using the DBT CSC
Sent from my SM-T860 using Tapatalk

broncogr said:
Get it on Frija or Samfirm using the DBT CSC
Click to expand...
Click to collapse
What's that?

are tools to quick download stock firmware from samsung even if you are rooted. they work in windows. after downloading and rooting the firmware you can apply it with odin. more on google...
Inviato dal mio SM-N975F utilizzando Tapatalk

Or you can just download the firmware and flash it with odin using homeCSC and remain stock unrooted with data intact.
Sent from my SM-N975F using Tapatalk

Also available in Sammobile.com
Sent from my SM-N975F using Tapatalk

ASJ2 for CSC BRI is out.

broncogr said:
ASJ2 for CSC BRI is out.
Click to expand...
Click to collapse
November patch ?

broncogr said:
ASJ2 for CSC BRI is out.
Click to expand...
Click to collapse
Cool, then T865 should be out soon as well
m.

Brotuck said:
November patch ?
Click to expand...
Click to collapse
Still September

broncogr said:
Still September
Click to expand...
Click to collapse
Really?!? So what's new?
m.

T860OXM1ASK1 DBT CSC is out
November security patch

broncogr said:
T860OXM1ASK1 DBT CSC is out
November security patch
Click to expand...
Click to collapse
anything else in the changelog?

Ather said:
anything else in the changelog?
Click to expand...
Click to collapse
... the algorithm for the fingerprint scanner ....
m.

I's as bad as before....

Finger print sensor worked fine for me before the new firmware. Installed the new firmware and deleted finger prints. Now I try redo them and cannot get one to finish no matter what finger I try with.

Took the update and forgot i have not rooted my tablet yet ??*, did this patch block root?

Fingerprint Woes
nrage23 said:
Finger print sensor worked fine for me before the new firmware. Installed the new firmware and deleted finger prints. Now I try redo them and cannot get one to finish no matter what finger I try with.
Click to expand...
Click to collapse
I have the same issue. Fingerprint worked fine before the update. After, I deleted all fingerprints, and could not get it to complete adding a fingerprint. Finally got it to add one, but it usually fails to read it. Anyone else with this problem?

New Firmware out for T865/DBT with december patch
https://www.sammobile.com/samsung/galaxy-tab-s6/firmware/SM-T865/DBT/download/T865XXU2ASL3/306368/
T865XXU2ASL3 - https://doc.samsungmobile.com/SM-T865/DBT/doc.html

Above links are for T-865
Get the correct firmware from Frija or Samfirm using DBT CSC

Is the csc same as s10+? I mean if my device is xar can I install DBT.. etc (T860 wifi)