In Germany - using DBT version of 9005 bought over Amazon - the update weighs in as 395MB. Applying now, will report back with results.
Darn it took a LONG time!!
rfox said:
In Germany - using DBT version of 9005 bought over Amazon - the update weighs in as 395MB. Applying now, will report back with results.
Darn it took a LONG time!!
Click to expand...
Click to collapse
After Update - Version is XXUENA2 - but another update has started (this time 29MB) - will see what that brings . . .
Second update - XXUENB1 now
rfox said:
After Update - Version is XXUENA2 - but another update has started (this time 29MB) - will see what that brings . . .
Click to expand...
Click to collapse
After second update - the version is NB1. Will report back if there are problems . . .
Same by me, update started
Can u say what change log number it has?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Model:*SM-N9005
Model name:*Galaxy Note 3
Country:*Germany
Version:*Android 4.4.2
Changelist:*636608
Build date:*Wed, 12 Feb 2014 08:24:44 +0000
Product Code:*DBT
PDA:*N9005XXUENB4
CSC:*N9005DBTENB1
MODEM:*N9005XXUENB1
Gesendet von meinem SM-N9005 mit Tapatalk
dajumper said:
Can u say what change log number it has?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=25831
Gesendet von meinem SM-N9005
HSD-Pilot said:
http://www.sammobile.com/firmwares/3/?download=25831
Gesendet von meinem SM-N9005
Click to expand...
Click to collapse
anyone having an issue flashing this over the polish nb3?
jetbruceli said:
anyone having an issue flashing this over the polish nb3?
Click to expand...
Click to collapse
Yes I do! At the end of flashing of this over polish nb3 odin says "FAIL" and system size or something...
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
radicalisto said:
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
Click to expand...
Click to collapse
yes but I was able to flash between PHN and OXX without any issue, why is this DBT being so fickle
Could be any number of reasons, size might be a few kb's smaller or bigger than another build. - built on a different computer etc etc
better wait it out for PHN NB4 then...
alexcarterkarsus said:
Yes I do! At the end of flashing of this over polish nb3 odin says "FAIL" and system size or something...
Click to expand...
Click to collapse
radicalisto said:
Size might be different due to different regions - you could solve this by wiping /system -- however you will need a PIT file to re-partition again.
Click to expand...
Click to collapse
Hey i got it to work this way,
I flashed the new firmware and once it failed I pulled the battery out then
restarted it went to download screen and then flashed cf autoroot since my knox is voided anyways and thats how I root to and it booted no problems!
Woo Hoo
but now have a samsung keyboard fc but I can flash a new one easy!
Tried to flash over polish ROM too - failed twice.
Ended up flashing back to Polish ROM - all good again.
I bet we going to have same problem now when BTU Drops.
jetbruceli said:
anyone having an issue flashing this over the polish nb3?
Click to expand...
Click to collapse
No problems here. Previously I was running DBT 4.3, then I flashed the first (official!) polish Kitkat. After NB3 came out I flashed that, all without Pit-File and the polish versions I flashed were the one-part firmwares, never the 3- or 4-part ones.
tl;dr: no problems flashing DBT-NB4 over my polish NB3, even reactivation lock was on.
Does anyone have a better mirror other than sammobile? The download there will take me 2 days!
Estoroth said:
No problems here. Previously I was running DBT 4.3, then I flashed the first (official!) polish Kitkat. After NB3 came out I flashed that, all without Pit-File and the polish versions I flashed were the one-part firmwares, never the 3- or 4-part ones.
tl;dr: no problems flashing DBT-NB4 over my polish NB3, even reactivation lock was on.
Click to expand...
Click to collapse
I was also using the single file polish rom. But this DBT would not take over it.
I might try odin 1.85 under pda.
snout said:
Tried to flash over polish ROM too - failed twice.
Ended up flashing back to Polish ROM - all good again.
I bet we going to have same problem now when BTU Drops.
Click to expand...
Click to collapse
Potentially yes. - a system wipe will fix it though.
snout said:
I was also using the single file polish rom. But this DBT would not take over it.
I might try odin 1.85 under pda.
Click to expand...
Click to collapse
So you've never flashed a pit file before? That's weird then.
I hope it'll work for you, good luck
Related
I am sure you all want the new "i9103 Galaxy R Android 2.3.6 ZSKK5 Taiwan November Release 5".
It has TWM TGY KOR CWT BRI csc.
I uploaded it to multiple mirrors:
http://www.multiupload.com/6XGHPVN8NA
First of all, do a CWM backup of the rom on your device.
Download, use Odin to put it on your i9103.
If you do not know your IMEI, go to Phone, call *#06# and write down your IMEI.
Then go to Phone and call *#272*IMEI#
It will ask you what CSC you want.
Do NOT take TWM (Taiwan Mobile) or CWT (Chunghwa Telecom Taiwan).
Take BRI or TGY or KOR. Click Install.
Enjoy Android 2.3.6 November Release 5!
After installing the Samsung Music Hub, this ROM is like the English European ROM, but with Android 2.3.6 updates.
Samsung Music Hub is here:
http://www.multiupload.com/VLTYQICISX
Thanks, It is better than previous ZCKJ3.
Has it only English language or has it other languages?
Claus72 said:
Has it only English language or has it other languages?
Click to expand...
Click to collapse
English (UK)
English (USA)
and Asian languages.
Thanks a lot I will try at home. I guess it's not rooted. How should we proceed to root it?
josjator said:
Thanks a lot I will try at home. I guess it's not rooted. How should we proceed to root it?
Click to expand...
Click to collapse
Flash the ardatdat kernel on it to root it.
legion1911 said:
Flash the ardatdat kernel on it to root it.
Click to expand...
Click to collapse
what is the improvement from previous FW? newer Tegra2 drivers?
and will this wipe user data?
krobar77 said:
what is the improvement from previous FW? newer Tegra2 drivers?
and will this wipe user data?
Click to expand...
Click to collapse
Yes it will wipe user data so make a backup if you have something you do not want to lose.
thank you but little questions:
Do I need to change my CSC? I dont understand the process, first I need to change CSC and then I must use Odin to flash the tar file, Am I right? If I just flash without changing CSC would I brick the R?
legion1911 said:
Yes it will wipe user data so make a backup if you have something you do not want to lose.
Click to expand...
Click to collapse
Afaik drivers are in the Kernel. If you go back to the 2.3.4 rooted kernel then you won't find any new ones. Only enhacements in the ROM (which of course is nice)
Google86 said:
thank you but little questions:
Do I need to change my CSC? I dont understand the process, first I need to change CSC and then I must use Odin to flash the tar file, Am I right? If I just flash without changing CSC would I brick the R?
Click to expand...
Click to collapse
I wrote flashing with Odin before changing csc. You can not change to a csc that you do not have. You change to a csc that this ROM installs.
It is not so easy to brick the R. I even recovered from many flash write errors.
You change the csc to have the new rom installed in a perfect way. After changing the csc the way I described, everything is reset and reinstalled, so you have the new ROM clean and pure like a virgin.
After the CSC change you have a new, unbranded, untouched, virgin, stock "Samsung i9103 Android 2.3.6 November Release 5".
josjator said:
Afaik drivers are in the Kernel. If you go back to the 2.3.4 rooted kernel then you won't find any new ones. Only enhacements in the ROM (which of course is nice)
Click to expand...
Click to collapse
You are right. I suggest you build a new root kernel based on the new kernel (like ardatdat did for the older kernel) and share it with us.
legion1911 said:
I wrote flashing with Odin before changing csc. You can not change to a csc that you do not have. You change to a csc that this ROM installs.
It is not so easy to brick the R. I even recovered from many flash write errors.
You change the csc to have the new rom installed in a perfect way. After changing the csc the way I described, everything is reset and reinstalled, so you have the new ROM clean and pure like a virgin.
After the CSC change you have a new, unbranded, untouched, virgin, stock "Samsung i9103 Android 2.3.6 November Release 5".
Click to expand...
Click to collapse
thank you! Now I could understand the process completely! The root for this rom is the same kernel we had right?
Are you using this KK5? Did you test it? any improvements?
Google86 said:
thank you! Now I could understand the process completely! The root for this rom is the same kernel we had right?
Are you using this KK5? Did you test it? any improvements?
Click to expand...
Click to collapse
Yes we do not have a better root kernel yet.
Yes I am using KK5 and I will stay with it.
Did not have time to do benchmarks with it.
A difference I noticed in 2.3.6 is that the home screen is a infinite loop like the apps screen.
Legion1911! Check there is a menu of Russian language?
Google apps for Asia in this rom?
BassOperators said:
Legion1911! Check there is a menu of Russian language?
Google apps for Asia in this rom?
Click to expand...
Click to collapse
Please read.
http://forum.xda-developers.com/showpost.php?p=19905203&postcount=4
http://forum.xda-developers.com/showpost.php?p=19903343&postcount=91
legion1911 said:
Please read.
http://forum.xda-developers.com/showpost.php?p=19905203&postcount=4
http://forum.xda-developers.com/showpost.php?p=19903343&postcount=91
Click to expand...
Click to collapse
Only English (UK) English (USA) and Asian languages and no other?
screen auto rotation doesn't work in I9103ZSKK5
nik2014 said:
screen auto rotation doesn't work in I9103ZSKK5
Click to expand...
Click to collapse
Not true.
I just tested again.
Went in browser, turned, works.
Went into youtube, turned, works.
Went into music hub, turned, works.
Went into Market, turned, works.
nik2014 said:
screen auto rotation doesn't work in I9103ZSKK5
Click to expand...
Click to collapse
I've been reading in the chinese forums that issue, on KK5 rotation fails... theres no perfect fw...
What I think is there is no rule for bugs, one time the appear , other they dont... my radio fm sometimes shuts down automatically , not always but It happens (2.3.4)
NEW FW, KK5 for BRI I9103ZSKK5_I9103OZSKK5_BRI
I dont understand all of them are asian fw... europe doesn't exist or what!
Firmware - N9005XXUDMJ6 - SM-N9005
Device Name: Galaxy Note 3 (Snapdragon)
Model: SM-N9005
Region: BTU
Version: N9005XXUDMJ6
OS Version: 4.3
Build Date: 21.10.2013
Changelist: 1937874
http://hotfile.com/dl/252755700/c59a7ff/BTU-N9005XXUDMJ6-20131029224622.zip.html
radekklamzynski7 said:
Firmware - N9005XXUDMJ6 - SM-N9005
Device Name: Galaxy Note 3 (Snapdragon)
Model: SM-N9005
Region: BTU
Version: N9005XXUDMJ6
OS Version: 4.3
Build Date: 21.10.2013
Changelist: 1937874
http://hotfile.com/dl/252755700/c59a7ff/BTU-N9005XXUDMJ6-20131029224622.zip.html
Click to expand...
Click to collapse
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
noticeable change in relation to MJ3
radekklamzynski7 said:
noticeable change in relation to MJ3
Click to expand...
Click to collapse
This Rom BTU MJ6 have a multi csc_vers OXADMJ4 that have also the CSC XEO from Poland.
Worth flashing this? I just updated my phone over OTA and I have MJ3 atm.
ValenteL said:
This Rom BTU MJ6 have a multi csc_vers OXADMJ4 that have also the CSC XEO from Poland.
Click to expand...
Click to collapse
CSC stored in this ROM:
radekklamzynski7 said:
CSC stored in this ROM:
Click to expand...
Click to collapse
What tool is this "Preconfig" csc please?
ValenteL said:
What tool is this "Preconfig" csc please?
Click to expand...
Click to collapse
application from google play, nothing more, root required
https://play.google.com/store/search?q=csc%20select
:good:
My OTA just started now the download...
Is this update only changing the CSC? Haven't you seen any other difference?
Sent from my SM-N9005 using xda app-developers app
radekklamzynski7 said:
application from google play, nothing more, root required
https://play.google.com/store/search?q=csc%20select
Click to expand...
Click to collapse
Wow, well I know this but I never use, it wipe all my data.
Whit root, I prefer use Root Explorer and change on system/csc by manual mode. I have my own way.
Thanks
ValenteL said:
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
Click to expand...
Click to collapse
How do you flash it without bootloader?
I am running on MJ3 with the bootloader removed via the root de la vega thread. I want to upgrade to MJ6 however, i want to be able to remove the bootloader.
Hi guys, do you think i can flash German DBT firmware over this UK firmware with odin without any issues?
Sent from my SM-N9005 using xda app-developers app
Does anyone noticed with mj6 modem better signal or anything?
Sent from my SM-N9005 using Tapatalk
So it will remove my root if I install by Odin?
Sent from my SM-N9005 using XDA Premium 4 mobile app
arvin2212 said:
How do you flash it without bootloader?
I am running on MJ3 with the bootloader removed via the root de la vega thread. I want to upgrade to MJ6 however, i want to be able to remove the bootloader.
Click to expand...
Click to collapse
I use this TOOL, I manage the Rom at end I have only 7 files on it.
ValenteL said:
I use this TOOL, I manage the Rom at end I have only 7 files on it.
Click to expand...
Click to collapse
Thanks for your answer ... but which 7 files (12 in the tar)?
Originally Posted by ValenteL-->
Flashed already by Odin over data from MJ3, whithout bootloader, rooted, alright it work. My bootloader continue [N9005XXUBMJ3].
Click to expand...
Click to collapse
LIPA said:
Thanks for your answer ... but which 7 files (12 in the tar)?
Click to expand...
Click to collapse
Don't make like me. I had bad boot's whit MJ6 and bootloader MJ3.
I made a Bootloader-MJ6.tar.md5 whit that TOOL, the 5 files from it, flashed by Odin and now whit Bootloader N9005XXUDMJ6 no more bad boot's.
Conclusion: A Rom must work whit your own bootloader.
Forget my test's please.
ValenteL said:
Don't make like me. I had bad boot's whit MJ6 and bootloader MJ3.
I made a Bootloader-MJ6.tar.md5 whit that TOOL, the 5 files from it, flashed by Odin and now whit Bootloader N9005XXUDMJ6 no more bad boot's.
Conclusion: A Rom must work whit your own bootloader.
Forget my test's please.
Click to expand...
Click to collapse
What do you mean by "bad boot" as all was OK on your 1st post on this thread ??
I don't understand your conclusion also
geek78 said:
What do you mean by "bad boot" as all was OK on your 1st post on this thread ??
I don't understand your conclusion also
Click to expand...
Click to collapse
At start the phone stop at samy logo, wait, wait, wait, poweroff/on, start, the same wait... sometimes start at 3º power on.
Whit the bootloader from Rom XXUDMJ6 it start quickly at first time. It's all Jean-Paul. You are French?
About my conclusion You must read this:
http://www.samsung.com/global/business/mobile/solution/security/samsung-knox
and:
https://www.samsungknox.com/overview/technical-details
Thanks. Sometimes bootloader can't work with some baseband. Maybe if you don't flash the new modem it works (even if it is not a good solution).
And yes I am french. But my father is from Maia and my mother from Braga
Model: GT-I9500
Model name: GALAXY S4
Country: India
Version: Android 4.4.2
Changelist: 1424588
Build date: Tue, 13 May 2014 04:27:29 +0000
Product Code: INU
PDA: I9500XXUFNE4
CSC: I9500ODDFNE1
MODEM: I9500DDUFNA4
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Download:
http://www.sammobile.com/firmwares/3/?download=31745
Mega Mirror :
https://mega.co.nz/#!EgQhmTpa!kFOPVaBH8JA9AlT7OJd6L6ukex8NL2I6KcKtwFMqXLo
Source and Credits:
Sammobile
fuser1337 said:
Model: GT-I9500
Model name: GALAXY S4
Country: India
Version: Android 4.4.2
Changelist: 923538
Build date: Wed, 05 Mar 2014 07:25:51 +0000
Product Code: INS
PDA: I9500XXUFNC1
CSC: I9500YDDFNC2
MODEM: I9500DDUFNA4
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Download:
http://www.sammobile.com/firmwares/3/?download=26971
Source and Credits:
Sammobile
Click to expand...
Click to collapse
Can I flash this through Recovery? I am rooted and running stock using TWRP
Is this ROM unbranded?
Sent from my GT-I9500 using Tapatalk
rramoutar said:
Is this ROM unbranded?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
This is the Indian Firmware (INS).
Hi guys ... can anyone upload this firmware to mega ? Thanks a lot.
Envoyé depuis mon GT-I9500 avec Tapatalk
Any major change with respect to previous versions?
ice tapatalk
rramoutar said:
Is this ROM unbranded?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
As far as know, India doesn't have branding in Android handsets. Its unbranded.
Sent from my SGP321 using XDA Premium HD app
venki5star said:
Can I flash this through Recovery? I am rooted and running stock using TWRP
Click to expand...
Click to collapse
I'm not sure, but most probably Odin is the only way.
fuser1337 said:
I'm not sure, but most probably Odin is the only way.
Click to expand...
Click to collapse
Odin will remove the root. I don't want to loose root.
Sent from my GT-I9500 using xda app-developers app
Yea that's true. But rooting doesn't take time at all via CF auto root.
Sent from my GT-I9500 using Tapatalk
fuser1337 said:
Yea that's true. But rooting doesn't take time at all via CF auto root.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Never mind. INS is a branded CSC for India. But I don't know which carrier using it. I am an Indian and as far as know, no android is branded till now.
Sent from my GT-I9500 using xda app-developers app
any mirrors ?? i cant download from sammobile
ice.modding said:
Any major change with respect to previous versions?
ice tapatalk
Click to expand...
Click to collapse
I'm still waiting for India "INU" version to test.
Anyways this INS version got a changelist 923538 over the previous changelist 699287 of NB3 firmware.
does it have spanish language??
heara said:
does it have spanish language??
Click to expand...
Click to collapse
spanish no.Try download lenguaje enabler from PlayStore.
fuser1337 said:
I'm still waiting for India "INU" version to test.
Anyways this INS version got a changelist 923538 over the previous changelist 699287 of NB3 firmware.
Click to expand...
Click to collapse
okay, thanks anyways :/
Flashed. Had to manually done via Odin as usual, as I never ever had the privilege of getting an OTA update!
Anyway, here are some things I noticed, I mean some changes from the previous Indian ROM,
1- The boot up audio has been changed. Don't know if this is as same as S5's one or not, but I guess it is, cause no one changes the boot up sound often! I don't like the new sound. It's kinda threatening!
2- The default wallpapers, both lock-screen and home screen have been changed. And all the built in wallpapers have been changed as well! You won't see that boy & balloon wall, or the airplane! All of them have been replaced with a new batch! Weird!
3- The horrible lag, which occurs in any email app's list view mode, with message preview set to on, REMAINS. This is the main reason I updated, and hoped would be solved, but no, I am really disappointed
devilsdouble said:
Flashed. Had to manually done via Odin as usual, as I never ever had the privilege of getting an OTA update!
Anyway, here are some things I noticed, I mean some changes from the previous Indian ROM,
1- The boot up audio has been changed. Don't know if this is as same as S5's one or not, but I guess it is, cause no one changes the boot up sound often! I don't like the new sound. It's kinda threatening!
2- The default wallpapers, both lock-screen and home screen have been changed. And all the built in wallpapers have been changed as well! You won't see that boy & balloon wall, or the airplane! All of them have been replaced with a new batch! Weird!
3- The horrible lag, which occurs in any email app's list view mode, with message preview set to on, REMAINS. This is the main reason I updated, and hoped would be solved, but no, I am really disappointed
Click to expand...
Click to collapse
Thanks for reporting. Did you notice any change in systemUI or Settings? SystemUI already got S5 goodies in kitkat update but hidden.
Sent from my GT-I9500 using Tapatalk
i m not getting this update via kies or ota i m running the previous version nb3 for product code ins only does anybody knw why is it so
aayushkhajuria2842 said:
i m not getting this update via kies or ota i m running the previous version nb3 for product code ins only does anybody knw why is it so
Click to expand...
Click to collapse
Yes Sammobile is showing that this is NOT available on Kies yet. Maybe Samsung is still testing this firmware OR maybe they're doing a bit more polishing before a roll-out.
fuser1337 said:
Yes Sammobile is showing that this is NOT available on Kies yet. Maybe Samsung is still testing this firmware OR maybe they're doing a bit more polishing before a roll-out.
Click to expand...
Click to collapse
Asking this because previously i was on 4.2.2 nd flashed via odin to get this nb3 no ota or kies update was pssbl that tym also
Sent from my GT-I9500 using Tapatalk
Description:
These firmwares are fully stock.
The only changes: root, odex/deodex.
The warranty will not be voided after flashing.
Abberiviations:
ROS - Root, Odex, Stock
RDS - Root, DeOdex, Stock
How to:
Download "CSC_*.zip" and "PDA_*.zip" parts for your model of phone
Unpack downloaded files. You'll get "*.tar.md5"
Run Odin, for CSC choose "CSC_*.tar.md5" and for PDA choose "PDA_*.tar.md5". No more changes in Odin window
Flash and wait until reboot
* I recommend to do a factory reset
Download:
MEGA.co.nz
You will help me, if you provide firmware's CSC parts of other regions of present firmwares. Usually fiwmwares for different regions are identical but CSC part (cache.img & hidden.img) is different. In order to not to make a lot of FW's with big size I made the only PDA part and l different CSC parts for that PDA part version. Example: we have "I9105PXXUBNG1" PDA part and "I9105POXABNG1" CSC part for DBT (German) region. And we can make it multiregional if you'll provide me other CSC parts.
reserved...
i downloaded the pda and the csc files but only the csc gives me and md5 when exctracted the pda file is zip schould i change the extention to md5 from the last one?
soz i was to early to write i had to extract it twice
Caimarcladev said:
i downloaded the pda and the csc files but only the csc gives me and md5 when exctracted the pda file is zip schould i change the extention to md5 from the last one?
soz i was to early to write i had to extract it twice
Click to expand...
Click to collapse
You have to unpack two downloaded zip files. You'll get two tar.md5 files. Nothing else.
waiting gt-19105
evol_201014 said:
waiting gt-19105
Click to expand...
Click to collapse
uploaded
andrewww57 said:
uploaded
Click to expand...
Click to collapse
is there any links another mega
evol_201014 said:
is there any links another mega
Click to expand...
Click to collapse
Sorry for long answer delay. No, only MEGA.
https://mega.co.nz/#!8poVjIzL!jG2ABdv6ZM49DGkz9r88Hkwq9GPI-UtoUfG8_nFwDSY
Here's the XEO CSC I made. Enjoy!
Is possible to upgrade this ROM with the last official upgrade from samsung for this smartphone???
A few days ago, has been released I9105PXXUBOB2 version for LUX.
You can find it here: http://www.sammobile.com/firmwares/d...5PLUXBOB2_LUX/
cuvetto said:
Is possible to upgrade this ROM with the last official upgrade from samsung for this smartphone???
A few days ago, has been released I9105PXXUBOB2 version for LUX.
You can find it here: http://www.sammobile.com/firmwares/d...5PLUXBOB2_LUX/
Click to expand...
Click to collapse
I was busy with AOSP 5.1 i fix many bugs see it on original developments, as promised I will test the new firmware tomorrow and post some screenshots, and also guys i am planning in the near future to release fully worked AOSP 4.2.2 so making this device as Samsung Galaxy S2 Plus Google Edition xD.
haky 86 said:
I was busy with AOSP 5.1 i fix many bugs see it on original developments, as promised I will test the new firmware tomorrow and post some screenshots, and also guys i am planning in the near future to release fully worked AOSP 4.2.2 so making this device as Samsung Galaxy S2 Plus Google Edition xD.
Click to expand...
Click to collapse
Take Your Time I'm Love Your Work :good:
haky 86 said:
I was busy with AOSP 5.1 i fix many bugs see it on original developments, as promised I will test the new firmware tomorrow and post some screenshots, and also guys i am planning in the near future to release fully worked AOSP 4.2.2 so making this device as Samsung Galaxy S2 Plus Google Edition xD.
Click to expand...
Click to collapse
Great to hear for aosp. Keep up.
Tested new firmware.
Same as all other.
beegee said:
Tested new firmware.
Same as all other.
Click to expand...
Click to collapse
Also same kernel???? Is impossible!!!!
Inviato dal mio GT-I9105P con Tapatalk 2
cuvetto said:
Also same kernel???? Is impossible!!!!
Inviato dal mio GT-I9105P con Tapatalk 2
Click to expand...
Click to collapse
Build Number.
cuvetto said:
Also same kernel???? Is impossible!!!!
Inviato dal mio GT-I9105P con Tapatalk 2
Click to expand...
Click to collapse
Yes bro is same, our device will kept with this version 3.0.31 that same one used on lollipop roms, i try to port 3.4 kernel but it's very hard job, because we should marge the basic architecture code to 3.4 btw i found they update the recovery, it's same of aosp 4.2 i think
Edit: the new firmware is very smooth comparing to old one + they add samsung go, if still release updated probably will release 4,3 and 4,4
The kernel has been compiled on february 2015, so is same version, but isn't same.
You said that the recovery has been changed, so We still have the error on recovery, about the wipe on cache and dalvik cache??
Inviato dal mio GT-I9105P con Tapatalk 2
cuvetto said:
The kernel has been compiled on february 2015, so is same version, but isn't same.
You said that the recovery has been changed, so We still have the error on recovery, about the wipe on cache and dalvik cache??
Inviato dal mio GT-I9105P con Tapatalk 2
Click to expand...
Click to collapse
I got 2 bugs on the new firmware first is when you want to wipe cache it will rebooted once press on wipe cache, second when you want to sear an app on google play, the keyboard is closed automatically, check it.
haky 86 said:
I got 2 bugs on the new firmware first is when you want to wipe cache it will rebooted once press on wipe cache, second when you want to sear an app on google play, the keyboard is closed automatically, check it.
Click to expand...
Click to collapse
I just had the close on search in the Play Store, but I am still on XXUBNE1, so I dont think its a problem of the new firmware. Solved the problem by resetting Play Store in the app manager.
If you don't like or you have problems with the new version of Android for Galaxy S4 (I9505), you can downgrade even if you flashed the new BL from Lollipop I9505XXUHOA7.
Instructions:
1. Flash this firmware into AP, untick Auto reboot
2. When pass in Odin, unplug cable, shut down Phone and restart directly into download mode
3. Reset Odin, put GNK2 Bootloader into BL and GNK2 Modem into CP, tick Auto reboot
4. When Phone restart (on Samsung logo) , shut down Phone and restart into recovery
5. Wipe factory reset, wipe cache partition, reboot.
Tested by me, and it works, no problems.
Download Links:
1. AP: Download
2. BL GNK2: Download
3. Modem GNK2: Download
MIRRORS:
1. Mirror MEGA - AP
2. Mirror MEGA - BL
3. Mirror MEGA -MODEM
I AM NOT RESPONSIBLE IF ANYTHING HAPPENS WITH YOUR PHONE! DO IT AT YOUR OWN RISK!
I DO NOT KNOW IF THE KNOX WILL BE 0x1 AFTER THAT. I HAVE FLASHED THIS ON MY PHONE, BUT IT WAS ALREADY 0x1.
good tutorial bro , thanks :good:
razvanos said:
good tutorial bro , thanks :good:
Click to expand...
Click to collapse
You welcome, hope it helped you! :highfive:
Is it possible to use another AP or I must use this one from first post? And what if I use PIT file when I was installed lollipop?
Sent from my GT-I9505 using XDA Free mobile app
igorass91 said:
Is it possible to use another AP or I must use this one from first post? And what if I use PIT file when I was installed lollipop?
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
I suggest install this AP, and the other two files and then download every KitKat version you want!
What about repartition??
Sent from my GT-I9505 using XDA Free mobile app
igorass91 said:
What about repartition??
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
I've flashed .PIT too on Lollipop, but for downgrade I didn't flash any .PIT, and I don't have problems!
Sincere Thanks!!
Hi!
Just wanted to say thank you for this guide - I'd flashed the Lollipop leaked ROM and I couldn't get WIFI to switch on, so was kinda stuck.
This has enabled me to go back to basics!
Thanks
Olly
Olleh said:
Hi!
Just wanted to say thank you for this guide - I'd flashed the Lollipop leaked ROM and I couldn't get WIFI to switch on, so was kinda stuck.
This has enabled me to go back to basics!
Thanks
Olly
Click to expand...
Click to collapse
I'm happy you solved the problem!
Press THANKS if I helped!
Credits for Phonandroid
I strongly presumed that these files are from phonandroid.com (Repack XEF)
You could at least give the origin of the tutorial.
Cheers!
Coniio said:
I strongly presumed that these files are from phonandroid.com (Repack XEF)
You could at least give the origin of the tutorial.
Cheers!
Click to expand...
Click to collapse
No, I'm sorry, I just got the links from a romanian forum, and not from "phonandroid", amd the mirrors were uploaded by me.
Once the bootloader is upgraded can't be downgraded, you can remove BL stuff
Inviato dal mio GT-I9505
down
AntaresOne said:
Once the bootloader is upgraded can't be downgraded, you can remove BL stuff
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
sorry my friend but you can !!!!i had the full stock germany leak but i didnt like an d search for a solution to go back to kk and my favourite goldfinger v9!i did all the things in this thread!but when i finish all this i didnt have wifi!so i flash the tar from sammobile(the latest nk4 dbt)and all is fine!:good::good::good::good::good::good::good::good:
Thanx very much man i love your briliant brain you are my hero
What all of that -_-
I just flashed the stock rom of kitkat from sammobile & it downgraded perfectly !!!!
Turk121 said:
I just flashed the stock rom of kitkat from sammobile & it downgraded perfectly !!!!
Click to expand...
Click to collapse
Was you on the lollipop and flashing the new bootloader or what??????????
And have you flashed the kitkat with that way
SADEK S4 GT-I9505 said:
Was you on the lollipop and flashing the new bootloader or what??????????
And have you flashed the kitkat with that way
Click to expand...
Click to collapse
Yes i was on leaked lollipop & i flashed this one I9505XXUGNE5_I9505OXAGNE5_I9505XXUGNE5_HOME.tar.md5 from sammobile & it worked perfectly restored the bootloader & everything but i didn't flash the pit file when i used the leaked one but now you can find the offical lollipop on sammobile for i9505
I flashed with PIT and in order to downgrade I reflashed a pit file for kitkat and a firmware from sammobile. All good. No problems
Why are u guys downgrading?
AntaresOne said:
Once the bootloader is upgraded can't be downgraded, you can remove BL stuff
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I can confirm that too...
You can downgrade to 4.4.2 anytime, even if you used the Bootloader upgrade!