Related
Hello everyone.
I am having issues with my Note being detected by my PC, I have installed Kies 3 and when the Note is connected the connection process starts but fails ( I tried using camera mode instead of MTP and Kies says It must be MTP so something is connecting), Also the device is detected in the device manager of the PC and the Note itself says its connected by USB 3.0.
I have updated, un-installed re-installed, all the drivers and Kies. I have also used a standar USB 2 cable and most of the ports on my PC.
Does anyone know what's going on? could it be a USB 3 issue with Windows?
Any help would be appreciated.
Cheers
Gav
I've been having consistent issues connecting with the tablet through adb, on both linux (2 separate installs), and windows 8.1. Sometimes it just will not detect it. It gets detected as mtp storage fine, but adb devices returns nothing. Ill triple check all the relevant settings, make sure the computer has been authorized by the tablet etc. It will literally work just fine, and then 10 minutes later without even disconnecting the cable to using the tablet, it will no longer be detectable by adb.
I'm hoping it's just bugs in the release firmware that haven't been ironed out yet, and will disappear with future upgrades or with the flashing of a custom rom.
I've also had it refuse to charge through my laptops USB ports, even the special "faster charging" port.
It turns out my issue was the unit itself I took it back to JB-HiFi and the staff checked it out and it wouldn't connect to any of their PCs, we tried the Demo unit and it worked fine, So i exchanged it and it works perfectly..
Thanks for your reply though
Cheers
Gav
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
No one else has experienced this or is willing to shed some light on this?
When I had that issue with my nexus 7 I switched out the USB cable for a different one. Seems to have improved.
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
Try downgrading to windows 7. Before you connect your phone to the computer install necessary drivers, samsung driver and kies. Use USB 3.0.
SBColasito said:
Try downgrading to windows 7. Before you connect your phone to the computer install necessary drivers, samsung driver and kies. Use USB 3.0.
Click to expand...
Click to collapse
Yeah, I'm definitely not going to downgrade to Win7. That would be 2 Windows versions ago for me. I've installed every driver available, from Samsung's (with and without Kies) to Google's universal Android USB drivers, and none have worked. I've also tried USB 3.0 and 2.0 ports (I have both on my laptop).
wvcadle said:
Yeah, I'm definitely not going to downgrade to Win7. That would be 2 Windows versions ago for me. I've installed every driver available, from Samsung's (with and without Kies) to Google's universal Android USB drivers, and none have worked. I've also tried USB 3.0 and 2.0 ports (I have both on my laptop).
Click to expand...
Click to collapse
Install kies. My computer didnt recognize my phone until I installed kies including every feature on kies.
SBColasito said:
Install kies. My computer didnt recognize my phone until I installed kies including every feature on kies.
Click to expand...
Click to collapse
Are you reading my posts? I stated in both that I've installed Kies and still couldn't get it to stay connected.
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
Hey, did you try connecting other usb devices to your pc to see if they connect? furthermore, you should also try to connect your phone to another pc to check if there is a USB port problem with your PC/Phone
For me the standard USB cable gives this problem, with another cable it works perfectly. So try another cable
Sent from my SM-G920F using XDA Free mobile app
Hi, everybody.
May you help me, please? My S6 SM-G920F, also is not recognised by windows 7. Smart Switch say S6 dont connect in emergency mode. I supose they means "emergency calls only", is that? I had bought the phone locked to O2 but I live in Portugal and I have no valid O2 SIM card. I bought an unlock SRS by TomMobile because I dont knew that needs a USB cable connection. What can I do, please?
Thanks in advance. AS
SBColasito said:
Install kies. My computer didnt recognize my phone until I installed kies including every feature on kies.
Click to expand...
Click to collapse
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
hi dear .you still facing this problem or you been able to resolve this issue... i am facing exactly same problem on s6 edge..... try many thinks but no success...
very slow charging
not connected to computer
not connect with odin in download mode
not connecting on ADB mode
reactivation lock also not removed from phone...
not accepting any code from dial pad
.....................
plz help me if someone have soloution of this.......
iphone and Samsung S6 same issues
Hello wvcadle,
I have the same issue and it is quite frustrating. Did you find a solution? As some additional info for you. My i-phone was doing the same thing on my computer. I thought it was the phone and I upgraded to a Samsung S6. It does the same thing as the I-phone, what you described and it works fine with other PCs. SO must be computer related. My bet is windows and my IT recommend a full wipe and reinstall of windows. We run Windows 7 Professional.
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
Most of the basics have been covered. Did you ever try different cables? Or on another computer? Do you have any issue charging the device by cable?
---------- Post added at 07:54 PM ---------- Previous post was at 07:42 PM ----------
fadi81 said:
hi dear .you still facing this problem or you been able to resolve this issue... i am facing exactly same problem on s6 edge..... try many thinks but no success...
very slow charging
not connected to computer
not connect with odin in download mode
not connecting on ADB mode
reactivation lock also not removed from phone...
not accepting any code from dial pad
.....................
plz help me if someone have soloution of this.......
Click to expand...
Click to collapse
Most USB ports only put out about .4 - .5 amps. They will generally charge more slowly
ULTERIOR-kurt said:
Hello wvcadle,
I have the same issue and it is quite frustrating. Did you find a solution? As some additional info for you. My i-phone was doing the same thing on my computer. I thought it was the phone and I upgraded to a Samsung S6. It does the same thing as the I-phone, what you described and it works fine with other PCs. SO must be computer related. My bet is windows and my IT recommend a full wipe and reinstall of windows. We run Windows 7 Professional.
Click to expand...
Click to collapse
there is no solution currently available i sold my cellphone as is. or you can send your phone to samsung service center if its under warrenty because only they can repair or replace phone for you
---------- Post added at 03:20 PM ---------- Previous post was at 03:17 PM ----------
Theodric58 said:
Most of the basics have been covered. Did you ever try different cables? Or on another computer? Do you have any issue charging the device by cable?
---------- Post added at 07:54 PM ---------- Previous post was at 07:42 PM ----------
Most USB ports only put out about .4 - .5 amps. They will generally charge more slowly
Click to expand...
Click to collapse
its not usb port or cable problem... this problem starts when someone trying to root ... & damage efs partition..
Its just Cable problem my friend.
Find and buy a reliable usb cable. You stated all options and fixes but you never been able to speak of your cable
For those whose saying that root and damaged efs will affect your phone connection to your pc, he's wrong . Rooting and corrupted efs partition doesnt have to do with windows driver etc.
Just think out of the box.
If it did not work with your pc. Then switch to other pc with smart switch & samsung usb driver installed.
I prefer installing samsung usb driver and then smart switch.
If it didnt work, try using different cables.
If it didnt work again, use other samsung phone and see if it connects.
And so on ...
Having exactly the same issue...
Started just today (yesterday and previously no problems experienced, phone would just connect & be visible and available for data tfr, no problems). Today, no go. To be clear, it's Galaxy S6 128 gb running Lollipop, which no longer connects for data tfr via USB to laptop running win7 ultimate. It only connects and charges. I have checked for updates for both windows and Android. There are none outstanding. I have downloaded & reinstalled samsung USB drivers on laptop. No change. I have tried 4 different USB cables, 2 new, and the cable supplied with phone. No go. I have tried these cables in all USB ports on laptop. I have tested other devices in all USB ports and connectivity to laptop with other devices is fine. I have tried connecting phone to another PC, same issue (only charging). I have done the developer thing and switched USB debugging on, no change, and off again, rebooted both devices multiple times, all with no change. Yesterday all was good, today - nada. Anyone got any other suggestions?? Wit's end, reached.
It's been said many times already, but I had this problem and it was the original white cord that came with the phone. It would not stay connected to my laptop nor would it stay connected to the charger. It sat there blinking and making the charge cord inserted sound when plugged into the charger/computer. I changed cables and it went away.
I remember picking the phone up one night in bed and forgot the charging cord was attached. I reached the end of the line and it yanked out of my hand and fell to the ground. This is the only thing I can think of that damaged the cord. I was lucky it didn't damage the charge port on the phone. So you could have a screwed up charge port on the phone if you've tried new cords with no avail. I wouldn't encourage it but sometimes the charging fin can be bent back into place to make a better connection....had to do this on a dell tablet.
Also, if you're using lock screen or fingerprint, I believe you have to unlock the phone after connecting to PC to access and transfer stuffs - just a thought.
talroot said:
...So you could have a screwed up charge port on the phone if you've tried new cords with no avail. I wouldn't encourage it but sometimes the charging fin can be bent back into place to make a better connection....had to do this on a dell tablet.
Also, if you're using lock screen or fingerprint, I believe you have to unlock the phone after connecting to PC to access and transfer stuffs - just a thought.
Click to expand...
Click to collapse
Thanks for the input - it's not a lock screen issue - I've tried connecting with screen locked (then unlocking when connected) - and connecting with screen unlocked, and I don't use the fingerprint security option. No changes observed. I have had concerns about the charging fin, but I am always careful connecting and careful with the phone generally - it looks OK and I'm rather loath to start bending it about in case I just f**k it up entirely. At least it still charges OK. Looks like I might have to bite the bullet, wipe it and take it to a Samsung repair centre. At least it's still under first year warranty. Thanks for your time talroot.
Original white cable did not work from day 1. Fast Charging is working fine but USB connection and tethering is a hell. You need a new cable and a good quality, not some cheep stuff.
Samsung really disappointed me because I owned many of their devices and most of them had some small issues, but after this in s6 edge and overheating issue (especially when using Gear VR) I will not by from Samsung anymore.
just for the record....
...my phone started connecting to laptop again. After about 3 weeks of non-connectivity, I connected again to charge and *ding* it was an external USB device once more. Same cable as before. Doesn't make any sense, but there it is. Thank you everyone for your input.
Hi. Got the phone a little over an hour ago. Loving it so far but I can not for the life of me get it to connect to my work PC. Drivers installed fine. Transfer Photos (PTP) works but others are not. Trying to get my music on the phone. Tried plugging the Pixel into my previous phone just not sure how to bring files over.
Thanks in advance for any help.
Did a window pop up on the phone to allow the phone to connect to computer?
PTP also works for me, but MTP doesn't. Ran through the Nexus toolkit, uninstalled/reinstalled and everything.
Same here. MTP not working, only PTP.
found this http://recomhub.com/blog/how-to-connect-google-pixel-and-pixel-xl-to-a-pc-computer/ I'm not able to install drivers though
EDIT:
Tried from a different pc running widows 10 and it worked right away
I just hit the USB notification on my phone and click file transfer, no issues on Windows 10.
Ok guys. I was able to fix the issue by uninstalling the device in Device manager and then uninstalling all android devices in USBDeview. After wich I restarted the pc then got the driver from the link I provided before. It's called latest usb drivers. I extracted them to my desktop and then I plugged in the phone. This time it worked and all the drivers got configured correctly. Hope this helps guys.
Just plugged mine in, works fine, no driver's to install, debian Sid ?
Sent from my Pixel using XDA-Developers mobile app
It works fine on my Windows 10. I plug it in to a USB3 port.
I've contacted Support from Essential but with no luck.
My problem is when I connect the Essential to the PC it automatically opens up
Windows Explorer and show NO FILES in FOLDER.
Any help would be most appreciated. I would love to transfer some pictures and music
from my PC.
Thanks
You are pulling down the notification bar and changing the connection from charging to transfer files, correct?
spotmark said:
You are pulling down the notification bar and changing the connection from charging to transfer files, correct?
Click to expand...
Click to collapse
^^^^This
Franksr said:
I've contacted Support from Essential but with no luck.
My problem is when I connect the Essential to the PC it automatically opens up
Windows Explorer and show NO FILES in FOLDER.
Any help would be most appreciated. I would love to transfer some pictures and music
from my PC.
Thanks
Click to expand...
Click to collapse
Had same issue, Windows 10 x64. Windows Explorer would take forever to load the folders, then when they finally did, there were random blank folder icons and just a whole lot of weird going on... Yes, USB Transfer was selected from pull-down. Reboot of phone made no difference. Factory Reset, no change.
In the end, it started working normally after switching USB cables (Anker). I don't have USB-C port on my laptop, and was using another type of USB-A to C cable at the time, so I'm wondering if that was my issue. The Anker USB-A to C cable worked just fine, and haven't had the issue since.
RMarkwald said:
Had same issue, Windows 10 x64. Windows Explorer would take forever to load the folders, then when they finally did, there were random blank folder icons and just a whole lot of weird going on... Yes, USB Transfer was selected from pull-down. Reboot of phone made no difference. Factory Reset, no change.
In the end, it started working normally after switching USB cables (Anker). I don't have USB-C port on my laptop, and was using another type of USB-A to C cable at the time, so I'm wondering if that was my issue. The Anker USB-A to C cable worked just fine, and haven't had the issue since.
Click to expand...
Click to collapse
Windows is notorious for phone connectivity not working if the USB drivers aren't correct or you have a bad cable.
I'll order Anker cables today...Thanks
I'll try anything. I just ordered the braided cables from Amazon and they show the phone is connected and charging but no files or folders.
I will order them today. I really appreciated your responses.
By the way, I just received the 360 Camera this morning.
-------------------
RMarkwald said:
Had same issue, Windows 10 x64. Windows Explorer would take forever to load the folders, then when they finally did, there were random blank folder icons and just a whole lot of weird going on... Yes, USB Transfer was selected from pull-down. Reboot of phone made no difference. Factory Reset, no change.
In the end, it started working normally after switching USB cables (Anker). I don't have USB-C port on my laptop, and was using another type of USB-A to C cable at the time, so I'm wondering if that was my issue. The Anker USB-A to C cable worked just fine, and haven't had the issue since.
Click to expand...
Click to collapse
Anker makes quality cables. I use them on my devices. That very well could have been the issue.
Sent from my Nexus 6P using Tapatalk
Learn Something New - Thank You
I didn't know I had to go to notifications in order to see the files and folders
in Windows Explorer. Evidently, either does the Zendesk Support they are using.
Thank You!
Franksr said:
I didn't know I had to go to notifications in order to see the files and folders
in Windows Explorer. Evidently, either does the Zendesk Support they are using.
Thank You!
Click to expand...
Click to collapse
Always start with the easy stuff.
Just received my device yesterday. Attempted to connect my device to my Windows 10 PC directly to my USB-C 3.1 port and it read the phone fine. I got the same issue as the earlier post, the phone shows PH-1 in Windows explorer. When I click on the phone to view the files it acts like it is loading the info, shows weird random folders, locks up then disconnects from showing up on the PC. I also attempted to use a USB-C to A plugging into one of my USB 3.0 ports and still the same thing. Has anyone gotten this to work yet? I am on Windows Creator Update. Thanks.
Me Too
Yep, got my Essential Phone a couple days ago. They're shipping these with just a Type-C USB cable. While I appreciate them future proofing things and all, my computer doesn't have a type C port. I ordered a Type-C to USB 3.1 adapter and also ordered a USB 3.1 to Type-C cable (cuz who doesn't need a spare cable, right?) Sooo .... I got both cable and adapter today. Same problem as described above. It detects the phone just fine, but all you get is "No Files" or "This Folder is Empty." Just "punting" and trying to copy to that big blank nothing errors out.
Yes, going to "Notifications," finding the connection and changing it from charging to file transfer works ... kind of. You can copy files in, but you can't do jack squat with them once they're there. And Essential Phone ships without any File Management app installed. (Or maybe they hid it far too well for me to find it??) And frequently, I'll get halfway done copying crap and then it craps out and stops copying half way through.
Essential is in serious danger of becoming a pure android enthusiast niche phone only. I don't think Andy Rubin wants to limit his phone's appeal like that. Clearly copying and managing files between the phone and PC and file management on the phone itself should be pretty basic stuff. For pretty much every other phone in existence, you plug into the computer and you are at least prompted on your phone whether you want to give your PC permission to access files on your phone. I've never seen another phone where you couldn't move/delete/copy/manage files already on the phone from your PC. Simply put, it shouldn't be this complicated and it should just work.
Laptop: Windows 10 Pro- 64bit
Essential PH-1
No issues on connections from Laptop to Essential Phone.
USB 3.1 A Cable to USB-C
See attached photos.
Franksr said:
I've contacted Support from Essential but with no luck.
My problem is when I connect the Essential to the PC it automatically opens up
Windows Explorer and show NO FILES in FOLDER.
Any help would be most appreciated. I would love to transfer some pictures and music
from my PC.
Thanks
Click to expand...
Click to collapse
how did you solve the problems? please i have the same problems.
Franksr said:
I've contacted Support from Essential but with no luck.
My problem is when I connect the Essential to the PC it automatically opens up
Windows Explorer and show NO FILES in FOLDER.
Any help would be most appreciated. I would love to transfer some pictures and music
from my PC.
Thanks
Click to expand...
Click to collapse
my problem is that the computer does not detect the phone
My s22 ultra suddenly does not work on dex. Theres no way to access the sd via a pc either.
I was using this exact setup and it worked fabulously.
As far as i know i went to bed one night and it didnt work the next time i went to use dex.
Reboot phone and pc? Is the phone recognised when connected? Try another cable, does it work on a different pc. Do other USB devices connect ok etc etc
i have rebooted both phone and pc. Same cable as when it did work infact the samsung original that came with the s22. My s9+ does not connect. Both phones DO charge via usb c.
I have infact reinstalled my pc and resest my phone to factory trying to fix this.
Still to no avail.
Does it connect to another pc? Usb pc hub might have failed
its a brand new laptop and it does power the phones. and it all did work fine. i can even power my usb c vape through the same port
there is not an alternative machine to test on
actually i just thaught of this, the last night i was using it i had the standard popup on my phone asking to allow dex to run. An ok responce and cancel or not now responce, i dont remember exactly.
Could this have done something if i hit cancel
also could there be something in the pc bios i may have not realized could effect this. Since i was on the same night trying to boot to a usb linux pendrive
When you connect your phone can you access its files on your pc? Is it recognised as drive
Ok so ive even reset the bios to system defaults and tried a regular usb to usb-c and still nothing
raul6 said:
When you connect your phone can you access its files on your pc? Is it recognised as drive
Click to expand...
Click to collapse
nope
Something is wrong with pc usb hub
raul6 said:
Something is wrong with pc usb hub
Click to expand...
Click to collapse
could it have anything to do with the phone usb connection settings. When you plug in a usb otg it normally would give an option for transfer or charge etc on the phones pull down menu and all its doing is saying fast charging
Try phone on another pc
Absolutely everything else works through usb mate.
What else can you access via USB. Drives, devices?
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
paralaxicon said:
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
Click to expand...
Click to collapse
im currently trying to see if i can run a lubuntu through usb bootable key and try to access the usb c ports from that.
I have been reading about my laptop and apparently it has a reputation of usb issues. lenovo x1 yoga gen 2 on win 10
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
paralaxicon said:
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
Click to expand...
Click to collapse
Do you have Link to Windows enabled on your phone? If so, turn it off and try running DeX.