4G+ icon to LTE icon? - OnePlus 7 Pro Questions & Answers

I literally just opened the box and put my sim inside... so far amazing!
Sorry maybe this is a bit picky... but I would like to see LTE and LTE+ instead of 4G and 4G+
any way to change the icons? i've looked and tried some methods but didn't work
Thanks

Imho all OP7PRO have 4G icons only. Next icon is VoLTE2, close to middle.
Odesláno z mého OP7PRO pomocí Tapatalk

Related

[Q] Does Mate 7 Show LTE next to signal bars?

My current network operator is LTE enabled, yet my Mate 7 shows only 4G next to the signal bars. I was wondering if there's a way to figure out whether I am connected to the LTE network or just using 4G. I know some handsets show LTE next to signal bars when they're receiving LTE signal; is this phone supposed to do that?
4G and LTE are one and the same thing...
Sent from my HUAWEI MT7-TL10 using Tapatalk
mirchichamu said:
4G and LTE are one and the same thing...
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
Oh, OK - so the fact that some handsets display LTE instead of 4G varies from device to device, and doesn't have any real impact on network performance, right?
Yes
Sent from my HUAWEI MT7-TL10 using Tapatalk
@aatifahmad
only 4G
:laugh:
No it isn't like with 3g and H/H+ .. think is instead of 3.5G (H) and 3.75G (H+) so awkward they decided to use H+ instead in past..
4G label is for common ppl that will follow after 3G .. LTE (long term evolution) ..
It depends of manuf really what term will use..

Moto G and APN Settings

I have had my Moto G 3rd gen for about a week now and I am using AT&T. I've had decent coverage and have been able to use LTE but I am using the default APN that the phone provides when adding a SIM card. I also notice that when I am not using LTE the phone drops back to 3G.
I have not found any information about the correct APNs for my carrier. Is HSPA+ supported for this phone on AT&T and are the default APNs the best setting to use?
I don't have the phone, but it could be that with the stock ROM, it will only show 3G even if you are actually using HSPA+. I am using the 1st gen Moto G, and that is what it showed until we got lollipop. Now it shows H when we are on HSPA/HSPA+. Maybe Motorola went back to that on the 3rd gen G? You can find out by going into settings and then looking at the SIM settings and check if you are on UMTS (3G) out HSPA (3G also but with better data speeds).
Edit: oh , and yes, the phone does support the HSPA bands on AT & T).
Sent from my Moto G XT1034 using Tapatalk
alfick3 said:
I don't have the phone, but it could be that with the stock ROM, it will only show 3G even if you are actually using HSPA+. I am using the 1st gen Moto G, and that is what it showed until we got lollipop. Now it shows H when we are on HSPA/HSPA+. Maybe Motorola went back to that on the 3rd gen G? You can find out by going into settings and then looking at the SIM settings and check if you are on UMTS (3G) out HSPA (3G also but with better data speeds).
Edit: oh , and yes, the phone does support the HSPA bands on AT & T).
Sent from my Moto G XT1034 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info. I checked in the settings when my status bar says 3G and I can confirm that I am on HSPA+. As far as APNs go, is it best to stick with the default configuration or is there a place where I can find other APNs?
Sent from my MotoG3 using Tapatalk
Do you get descent LTE? You apparently get good H+, so I'd just leave well enough alone.
Sent from my Moto G XT1034 using Tapatalk
alfick3 said:
Do you get descent LTE? You apparently get good H+, so I'd just leave well enough alone.
Sent from my Moto G XT1034 using Tapatalk
Click to expand...
Click to collapse
Yes LTE is fairly stable. Thanks for your help!
Sent from my MotoG3 using Tapatalk

H955 LTE cat 9. 4G++

Different sources have different info. Does H955 have LTE cat 9? And how to enable if it does? Also will icon change to 4g++ or stays 4g+? My provider have launched LTE cat 9, but seems that i cant test it. Also they tell that only samsung s6 s6 edge can be used... Possible to enable it on my device?
My provider still not provide lte in my zone.... You are lucky...
Lte cat 6 is supported by flex 2
Same speed of s6/s6 edge, 450Mbps
Enviado desde mi LG-H955 mediante Tapatalk
In my zone I have LTE + but don't have any proof on LTE ++...
Inviato dal mio GT-I9505 utilizzando Tapatalk
I tested few times and max what i can get on speedtest was ~150mbps. When they were introducing new lte to journalists the s6 showed almost 300mbps. As i understand LTE cat 9 is using all 3 bands 800 1800 and 2600MHz, is it possible that its somehow locked by stock firmware?
Last time bump. If i root is there any additional settings for LTE?
autogarsas said:
Last time bump. If i root is there any additional settings for LTE?
Click to expand...
Click to collapse
You'll be getting a full control of the device when you will have got it rooted but this is not giving you any kind of extended LTE options. Provided that the thing you are looking for is a matter of additional info you may add into some file or implement to device , of course the root will help you. But seriously do not root your device for this LTE purpose. By root you won't get such an option just because you are rooted

What is your LTE, 4G Speeds like?

It seems that my speeds suck anywhere. Don't get more than 1mbps on my LTE Network full bars. What is wrong? All i did was Flash CE1 Files with the USA Firmware still intact? To get Fingerprint Sensor working. This problem was before the flash as well. Any help? Can you guys post your LTE Speeds? Supposedly need to be max 10mbps. i gotten those speeds before on my Carrier on my Z3+
20mbs down, 10mbps up, this is usualy what i get. Maybe sth wrong with ur antena or settings
Down
Download lte+
CKkio23 said:
It seems that my speeds suck anywhere. Don't get more than 1mbps on my LTE Network full bars. What is wrong? All i did was Flash CE1 Files with the USA Firmware still intact? To get Fingerprint Sensor working. This problem was before the flash as well. Any help? Can you guys post your LTE Speeds? Supposedly need to be max 10mbps. i gotten those speeds before on my Carrier on my Z3+
Click to expand...
Click to collapse
30Mbps on two signal bars. That's pretty much max my provider can handle.
I'd do a full format and flash new .65 firmware and start from there. You've got a dirty flash, maybe something with baseband drivers got screwed up.
Orange, Poland
Wysłane z mojego F8331 przy użyciu Tapatalka
FREE operator
Unlimited 4G data
France
I believe I can reach 200Mbps someday. Still I have to wake up at 5am to get the best of it.
Why I can't see my linked image like above?
https://forum.xda-developers.com/picture.php?albumid=14443&pictureid=56217

LTE-Advanced (4G+) doesn't seem to work in my p20 pr0

Whilst I'm being in area which is 100% covered by lte-a, using the same sim in other lte-a capable handsets (which get a 4g+ lock right away), only the p20 seems to stay only with regular 4g. Is my p20 defective? I already made sure that the high-speed lte is enabled in the menu, and I'm running the latest firmware.
Sent from my CLT-L09 using Tapatalk
Fatherboard said:
Whilst I'm being in area which is 100% covered by lte-a, using the same sim in other lte-a capable handsets (which get a 4g+ lock right away), only the p20 seems to stay only with regular 4g. Is my p20 defective? I already made sure that the high-speed lte is enabled in the menu, and I'm running the latest firmware.
Sent from my CLT-L09 using Tapatalk
Click to expand...
Click to collapse
On my P20 Pro and on wifey's P20, 4G+ works like a charm with no setup needed, so I'd recommend you to get in touch with Huawei support.
Enviado do meu CLT-L29 através do Tapatalk

Categories

Resources