Database Info

[ROM][STABLE][J600G]Revolution S9 ROM

Revolution ROM for J6 (2018)
It all starts here
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
DO NOT TAKE MY STUFF WITHOUT PERMISSION!
YOU WILL BE REPORTED BY DOING SO
Introducing, my very first direct S9 port!
So, you decided to buy this phone, huh? Maybe you had no choice, maybe you only saw "octa-core chip" and jumped all over it, or maybe you just assumed that you would just download ROMs from XDA to make this device better since all other devices contain ROMs on this forum by the truck loads.
Then you get to the sad realization that generally speaking, this phone is really bad and no developer would want to buy this 2018 device with a 2016 processor and barely any sensors lol
Well, I hope I can at least ease a bit of that pain with this ROM. I am no master developer, but at least I know my development a-b-c's... but just barely.
So, it is only fair to warn you the following (aside from that giant disclaimer at the beginning of the thread lol):
If you are expecting this device to run as smooth as an S9 phone, have the expectation to download this ROM to improve your battery life by 50% , are expecting this ROM to run Fortnite at the highest settings possible as an actual S9 would or even expect the Benchmark scores like Antutu to increase, THEN STOP! STAY IN STOCK ROM!
AS I STATED, I AM NO MASTER DEVELOPER, MY KNOWLEDGE ONLY EXTENDS TO FRAMEWORK EDITING, I HAVE NO KNOWLEDGE ON KERNEL TWEAKING
And even if a dev tweaked the kernel to run faster, I doubt any of the above would happen, lower your expectations you're not dealing with a high end device
OK, rant out of the way. Let's get started!
Supported variant: SM-J600G (I do not know if this will run on any other variant, if you decide to try please give me feedback so I can update post)
Features:
*S9 Firmware
*Edge panels
*Edge lighting
*Smart select
*GIF recording
*Smart stay
*S9 Multiwindow (Pop-up view action)
*Open notifications in multiwindow mode
*Smart capture
*Scroll capture
*Infinity wallpapers
*And I think for the most part, all the features that the J6 offers by default
*More to come, of course
ROM Info:
*Based on S9 firmware G960FXXS2BRJ6
*Deodexed
*Zipaligned
*Busybox
*Slightly debloated
*Rooted with Magisk
Bugs:
*Mobile Hotspot does not work
*Phone lags at the initial boot due to being rooted with Magisk. To fix this, you just have to reboot upon getting to welcome screen
*Resolution looks a bit blurry. To fix this, just go to Settings->Display Settings->Resolution and change resolution to WQHD+, apply and the change back to HD+ and apply. Then the bug is fixed.
*This is initial release, expect bugs other than these mentioned. Please report if you find more
*AOD: Does not work at the moment
*Currently does not work with 2 SIMs inserted [FIXED]: Thanks for tutorial to BlackMesa123 here and thanks to @corsicanu for discovery
Changelog:
*13/12/20108 V1.0*
Initial release
Download links:
Google Drive
More mirrors to come
Installation instructions
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone
This is done to remove lag due to being rooted with Magisk
-Complete setup
-Enjoy
Special thanks!
@ananjaser1211 for sharing all his knowledge on S9 porting. Fixed a couple of major bugs because of his guidance. You are awesome, dude!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
Revolution S9 ROM for J6, ROM for the Samsung Galaxy J6+
Contributors
ShaDisNX255
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Source Code:
https://github.com/Albe96XDA/j6lte
(Thanks Albe, you rock!)
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2018-12-13
Created 2018-12-14
Last Updated 2018-12-13

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Lol this is #3

Final reservation

Awesome work :good: glad we see more people interested in development. keep it up

J6 or j6+ ? And where could i get twrp ?

Amazing work bud, the ROM is truly awesome.

danicadanicadanica said:
J6 or j6+ ? And where could i get twrp ?
Click to expand...
Click to collapse
Normal J6, I've asked the thread to be moved

Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..

danicadanicadanica said:
Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..
Click to expand...
Click to collapse
It should be the same, but I can't guarantee it. An F user told me it runes fine

So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G

danicadanicadanica said:
So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G
Click to expand...
Click to collapse
Here is TWRP: https://forum.xda-developers.com/galaxy-j/development/recovery-twrp-3-2-2-0-galaxy-j6-on6-t3819751

Ok thanks feedback soon

You're doing great job.Keep it up!

Thanks for this rom. Will try it. Just Got my done back after screen repair so rmm lock still active.

Shouldn't this be in the development section?

ashyx said:
Shouldn't this be in the development section?
Click to expand...
Click to collapse
Yes, yes it should (but I need to post kernel sources and stuffs and I'm struggling to do that since its just stock kernel, but I'll get that sorted soon to get it fixed

Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix

KRiST0F said:
Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix
Click to expand...
Click to collapse
I am the complete opposite
I like the Samsung stuffs

[ROM][8.0][STABLE][J600G]NcX ROM A8+ Port

(excuse my noobish image editing skillz lol)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Fully ported A8+ ROM A730FXXS3BRK5
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots
And stock J6 stuff
Smart view may be non-functional
SuperSU rooting was added in Aroma installer for testing purposes only, do not select this as it will not boot the phone, root only with Magisk
Edge Lighting doesn't work
Bixby Vision in camera does not work
Only Phoenix Kernel and stock kernel boot for now with Magisk on first installation, I am trying to fix so that all kernels work on first time set-up
02/03/19: Release
Google Drive
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
@ananjaser1211 for pretty much doing this PORT himself lol. If it wasn't for his guidance, this would be a failed ROM. Also for Helios kernel!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@By Zonik For letting me use SynexOS ROM control. I am keeping the original name.
RC Source Code (@Wuby986 & @daxgirl): https://github.com/Zonik94/6thGear-RomControl-v2.0
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255
Source Code: https://github.com/Albe96XDA/j6lte
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-03-02
Created 2019-03-02
Last Updated 2019-03-02

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of NcX again
[Q] My phone will still not boot, what is my last resort?
[A] Please do the following:
Re-install NcX
After installation finishes, select "Save Logs"
It will save a .txt file in your memory, please post so I can review your problem
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted, even though I selected a root method
[A] Please make sure you root via Magisk. SuperSU is only there for testing and did not work.
[Q] The phone is going way too slow!
[A] Caused by Magisk. Just reboot the phone 2 or 3 times and the lag will be gone forever.
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Awesome work! The ROM works flawlessly on my J600F.
Good luck with this one!

ShaDisNX255 said:
(excuse my noobish image editing skillz lol)
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Fully ported A8+ ROM A730FXXS3BRK5
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots
And stock J6 stuff
Smart view may be non-functional
SuperSU rooting was added in Aroma installer for testing purposes only, do not select this as it will not boot the phone, root only with Magisk
Edge Lighting doesn't work
Bixby Vision in camera does not work
Only Phoenix Kernel and stock kernel boot for now with Magisk on first installation, I am trying to fix so that all kernels work on first time set-up
02/03/19: Release
Google Drive
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
@ananjaser1211 for pretty much doing this PORT himself lol. If it wasn't for his guidance, this would be a failed ROM. Also for Helios kernel!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@By Zonik For letting me use SynexOS ROM control. I am keeping the original name.
RC Source Code (@Wuby986 & @daxgirl): https://github.com/Zonik94/6thGear-RomControl-v2.0
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255
Source Code: https://github.com/Albe96XDA/j6lte
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-03-02
Created 2019-03-02
Last Updated 2019-03-02
Click to expand...
Click to collapse
Ah ok this is the one will give feedback soon

A must have rom unfortunately it corrupts efs (Unknown baseband and hardware version) if i installed xposed systemless which is a very important part of my daily usage luckily i got my efs backup. Also theres a minor bug in offline charging animation.

Last test now i found out the problem its not xposed making baseband corrupted its the selinux thing because it triggers when i installed viperfx which needs enforcing the rom itself has fake enforcing..

danicadanicadanica said:
Last test now i found out the problem its not xposed making baseband corrupted its the selinux thing because it triggers when i installed viperfx which needs enforcing the rom itself has fake enforcing..
Click to expand...
Click to collapse
What kernel did you install?

ShaDisNX255 said:
What kernel did you install?
Click to expand...
Click to collapse
All kernel and also stock all failing

Awesome Work.Keep it up mate! ✌

I need help I would like to make an Edge Panel port for my J4 + J415F, could you teach me how to do it @ShaDisNX255 ?
I already have root and TWRP

chalofito said:
I need help I would like to make an Edge Panel port for my J4 + J415F, could you teach me how to do it @ShaDisNX255 ?
I already have root and TWRP
Click to expand...
Click to collapse
Sure, you can look me up in Telegram, which is what I use as a messaging service

sir can i flash this on J600F?

jam24ph said:
sir can i flash this on J600F?
Click to expand...
Click to collapse
I think some F users have flashed it successfully.

Thank you for this ROM, installed on SM-J600FN

64 bit rom? I know a8+ is 64 bit but just wanted to make sure. I'm fed up with stock 32 bit rom. I dont have better data plan. So please someone reply :crying:

MadhanMurali said:
64 bit rom? I know a8+ is 64 bit but just wanted to make sure. I'm fed up with stock 32 bit rom. I dont have better data plan. So please someone reply :crying:
Click to expand...
Click to collapse
The J6 can't run 64 bit unless Samsung makes it themselves

Thank you for reply

UI crashed
After installation UI is unresponsive..........sometimes it crashes too.....!! please help........!!!!!

[ROM][OneUI][Pie][MAGISK][SM-J600G/F]Stock OneUI for J6

Stock OneUI Release for J6
So, a couple of days ago OneUI was released for the SM-J600F. I simply took the ROM and made it flashable via ZIP
This is JUST STOCK ONEUI """OFFICIAL""" for the J6, DO NOT EXPECT EXTRA FEATURES!
Also, I debloated it lol
BUT
I want to make something clear. If you have not read this and this allow me to summarize
Pie brings new locks to the table, something far worse than rmm lock. If you flash Pie officially, either via OTA or via Odin, these new locks will prevent you from rooting, as I understand it.
The workaround is to flash Pie but with Oreo BL.
BUT
We don't know how long that will keep working
Samsung can easily make Pie only boot with Pie BL.
So... for now... DO NOT UPLOAD YOUR BOOTLOADER TO PIE YET OR YOU WILL NOT BE ABLE TO ROOT OR FLASH CUSTOM BINARY ANYMORE!
And this is where this zip comes in handy!
This ZIP will not change your BL (it will keep your Oreo BL) and included is a kernel (Helios Pie kernel) that fixes small issues. Also, if anything were to go wrong, you still have TWRP to backup and restore, how awesome is that?
So, you have been warned!
Downloads:
Android File Host:
https://www.androidfilehost.com/?fid=1395089523397933484
Mega: https://mega.nz/#!5BEXVSgJ!I6ta7PQQFHFqF9b1i3QeE5pANf1lVmF_c87uS6p8vEI
OneDrive: https://1drv.ms/u/s!AjUnizekeauKhAHeYnt-lwr5YZDW
(I'll try to upload to GDrive and AFH soon, I promise)
Instructions:
-Create a backup (just in case)
-Wipe system and data
-Flash zip
-Reboot and wait 10 minutes
If after 10 minutes, it is still in logo, force a reboot (Hold VOL +, VOL - and POWER) and then the ROM will work
"Features":
-Official Pie!
-In theory, should not have major bugs
-Pre-rooted with Magisk
-Debloated
If you appreciate having Pie early (and rooted!) please consider a donation to ananjaser1211, who was kind enough to compile Helios Pie kernel without even having the device!!!
http://paypal.me/ananjaser1211
@ananjaser1211 for compiling Pie kernel for the J6... without even having the device! Amazing job!
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
XDA:DevDB Information
[STOCK][OneUI][9.0]Stock OneUI for J600 G/F, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, ananjaser1211
Source Code: [url]https://github.com/ananjaser1211/Helios_7870[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-04-03
Last Updated 2019-04-03

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Enjoy Pie

Yes its working

You should tell that vendor will be also replaced.

Downloading
Downloading...

nice work

Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.

MKashifSajjad said:
Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.
Click to expand...
Click to collapse
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?

Battery takes about 2 cycles to stabilize. My first testers and me did notice higher than normal drain but then reduced the drain a lot.

Aleko91 said:
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?
Click to expand...
Click to collapse
It's normal for any camera to flicker when taking photos of older tvs as far as I know

j6 plus :crying:
???

This is not the J6+ forum lol

Will it work for On6
J600G please reply

naviidgull said:
Will it work for On6
J600G please reply
Click to expand...
Click to collapse
Yeah, maybe lol. Backup before you try anything

Digital TV is working?

Links are not working anymore bro please bro new link

ShaDisNX255 said:
It's normal for any camera to flicker when taking photos of older tvs as far as I know
Click to expand...
Click to collapse
on stock oreo rom it's not flickering , but it flickers even on odex stock rom

[TREBLE][10.0][arm64] H-VENDOR V1.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-10-06

Reserved

Does ANDROID 11 ROMs work ?

Please link us to Latest Recovery for G610X

Unable to Set Screen Lock
Flashed the files according to the instructions, the vendor is amazing (thanks a lot) however when i try to set a screen lock i get "Screen Lock was already changed. Try again with the new screen lock." and my lock screen type automatically becomes swipe. I factory reset my phone again, as well as did everything from start since i thought i went somewhere wrong but i still get this error. Any help would be appreciated.
Im using Havoc-Os 3.6 (The 13 Jun build iirc) with pico gapps.

The speaker doesn't work. please fix the problem because everything works perfectly except this

Khione42 said:
The speaker doesn't work. please fix the problem because everything works perfectly except this
Click to expand...
Click to collapse
Hey @Astrako, I wanna address this issue as well... Firstly, I've been using your crDroid build from the day you posted it... and it's fabulous....everything works perfectly and flawlessly....no sound issues, nothing..... The screen on time and standby time has drastically improved.... A lots of thanks for this Gsi build... But when I tried other Android 10 arm64 A/B GSIs, using the H-vendor, all worked fine, except the sounds and let me clear that only the call volume is working , but the media, notification, and alarm sound doesn't work. The second issue is with the screen lock. Nothing other than swipe is allowed and gives an error "Screen lock was already changed" whenever I try to change it. Please tell how to fix it... Thanks in advance for your attention . I am looking for your reply.

Bug in vender (audio not working)
Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
OneDrive folder
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_...roid_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-06-16
Click to expand...
Click to collapse
Yesterday I try your mod vender. I'm happy to see better performance and NIGHT LIGHT in crdroid 6.9. Everything is going well but no audio in speakers Headset is working.Thanks

Found a fix for SM-J701X speaker not working
Hey, after thinkering for a couples hours, i found the problem with the speaker not working with this vendor on the SM-J701X. :victory::victory:
In the .zip archive the Mixer_Path.xml is missing from H\device\j7velte\vendor\etc\. The one already in H-VENDOR_V1.0.zip\vendor\etc\ has the speaker commented everywhere.
After adding it, reflashing gsi and the H-Vendor it's working.
I'll leave a link to the Mixer_Path.xml i used if you dont have it already.
See yall :highfive:
https://drive.google.com/file/d/1MFXANvkM83MI1BSmK57456G--HieDFOw/view

Hey there i have a problem with flashing gsis and gapps actually this is probably not the correct place to write this but anyway
I was trying to flash havoc os and i already have your repartitioner script but when i flash the gsi system partition goes to 1800 mbs leaving 26 mbs of free space and i cannot install gapps what should i do ?

Need more info
Aisenesia said:
Hey there i have a problem with flashing gsis and gapps actually this is probably not the correct place to write this but anyway
I was trying to flash havoc os and i already have your repartitioner script but when i flash the gsi system partition goes to 1800 mbs leaving 26 mbs of free space and i cannot install gapps what should i do ?
Click to expand...
Click to collapse
What is the phone model? You might be runnig out of space.
I'm currently running HavocOs 3.8 on my SM-J701M with this vendor and the fix i found for the speakers not working without any problems

Do we have a fix for the lockscreen? it gives an error "Screen lock was already changed". whenever i try to change the lockscreen to pin, password.

exoticpubis said:
What is the phone model? You might be runnig out of space.
I'm currently running HavocOs 3.8 on my SM-J701M with this vendor and the fix i found for the speakers not working without any problems
Click to expand...
Click to collapse
I have j701f (16g-2g) version and i actually have space at internal storage i will add screenshots later
---------- Post added at 04:58 PM ---------- Previous post was at 04:00 PM ----------
https://imgur.com/a/LcYJFKb
reply if you cannot see images so i can upload anywhere else

Hello.
[Refurbished Samsung A3 2017 / SM-A320FL / latest 8.0.0 stock ROM / security patch 2020.04 from device's updater]
Code:
a3y17lte:/ $ getprop ro.treble.enabled
false
So, it seems I need H-Vendor...
Those coming from stock Samsung firmware have to format the data partition
Click to expand...
Click to collapse
Am I understanding well ? I need to:
- flash a custom recovery.img (--no-reboot)
- format data partition,
- clean flash (full wipe) an arm64 A/B GSI.img (don't reboot),
- flash H-Vendor.zip,
- then reboot.
No more steps ? (I don't need gapps)
Thanks in advance.
P.S.: may I use first your repartitioner script ?

exoticpubis said:
Found a fix for SM-J701X speaker not working
Hey, after thinkering for a couples hours, i found the problem with the speaker not working with this vendor on the SM-J701X. :victory::victory:
In the .zip archive the Mixer_Path.xml is missing from H\device\j7velte\vendor\etc\. The one already in H-VENDOR_V1.0.zip\vendor\etc\ has the speaker commented everywhere.
After adding it, reflashing gsi and the H-Vendor it's working.
I'll leave a link to the Mixer_Path.xml i used if you dont have it already.
See yall :highfive:
mixer_paths.xml
drive.google.com
Click to expand...
Click to collapse
it works fine with this fix thanks a lot.please find a fix of screen lock

[ROM][J600X] H-ROM S20 PORT V2.0 [10.0][OneUI 2.1][64 bits][Treble]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects. You are only allowed to fix the bugs for your variant and I will post here.
FEATURES
OneUI 2.1 under Android 10, ported from the Samsung Galaxy S20 5G (SM-G981B)
All J600 variants should be supported
Arm64 with Treble support
Fully deodexed
H-KERNEL included. Built permissive and overclocked
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
S10 CSC with additional features (call recording, etc)
And many more!
COMMON KNOWN BUGS
Updating camera app from Samsung App Store will break it
Face unlock (most likely never will work on this port)
Camera on live drawing
Some 3rd camera apps like footej don't work
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 2.0 (14/07/2020)
More info in 2nd post
INSTALLATION
Installer will detect right variant and flash proper files
Vendor partition is required
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
Once set, go to screen settings, set fullhd resolution and set back hd
SCREENSHOTS
https://imgur.com/a/j7Pk3Rd
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM S20 PORT, ROM for the Samsung Galaxy J6
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-07-14
Created 2020-07-14
Last Updated 2020-07-15

H-ROM S20 PORT V2.0 (14/07/2020)
July security patch
Added some new camera modes thanks to @neel0210
Added bloat zip containing several Samsung apps for those with larger system partitions. Feel free to debloat it by yourself according your needs. It will get install by default when flashing the rom zip for the A3 and the J6
GoogleDrive folder
Mega folder
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.

mine too

Volte working

THANKS :good::good::good::good:

Thank you so much and thumbs up for this great work you did . ????????

Thanks For Your Hardwork...
and i want to tell a bug that camera is crashing and keep stopping

Thanks so much.....
Great work:laugh::good:
..... but ... I HAVE PROPLEM.....
I can't delete apps using link2sd .... is there any solutions .. ????? ...

Here I have listed three bugs I faced while using this rom, Hope the admin of this rom will improve this in H ROM 3.0 ...
1)
Volte is just for show in this rom , If you are using jio sim or any other sim that uses volte and you have to make or recieve calls , then don't download this rom .
What's the issue : Their is only volte icon but when you are going to call someone or recieve any calls using VOLTE then your network goes down and the call end suddenly .
I haven't faced this issue in stock ONE UI 2.0 , but only faced with this rom and other GSI's available for J6 or ON6 .
So if you want to call someone or have to receive others call using VOLTE then this rom is not for you.
You can still send or recieve messages or Use your mobile data and their is not Issues in it.
2)
The Camera app is crashing when you click on filters mode or sometimes randomly , otherwise no bugs in it yet.
3)
If you will compare the speed test of this with havoc or evolutionx gsi's then you will find that this rom is too much slower in comparison to them.
Summary of Bugs detected:
1) VOLTE is not working for calls in stock dialer app, I didn't tried it with "Jio call app"(India) which basically allows support of volte for phones without volte for jio sims.
2) Camera is crashing when you click on filters or sometimes randomly too.
3) This rom is very slow as compared to other gsi's .
4) Other kernals like kraken or vendors doesn't boot up your system (well that's not neccessary but I included it)
If the developer will fix Volte then I will continue using this rom , I left is majorly cause I can't call or recieve someone's call, cause of volte issue I flashed it back to stock rom.
Btw I use ON6 (J600GF), its basically Indian version of J6
Cheers

pra7eeks said:
Here I have listed three bugs I faced while using this rom, Hope the admin of this rom will improve this in H ROM 3.0 ...
1)
Volte is just for show in this rom , If you are using jio sim or any other sim that uses volte and you have to make or recieve calls , then don't download this rom .
What's the issue : Their is only volte icon but when you are going to call someone or recieve any calls using VOLTE then your network goes down and the call end suddenly .
I haven't faced this issue in stock ONE UI 2.0 , but only faced with this rom and other GSI's available for J6 or ON6 .
So if you want to call someone or have to receive others call using VOLTE then this rom is not for you.
You can still send or recieve messages or Use your mobile data and their is not Issues in it.
2)
The Camera app is crashing when you click on filters mode or sometimes randomly , otherwise no bugs in it yet.
3)
If you will compare the speed test of this with havoc or evolutionx gsi's then you will find that this rom is too much slower in comparison to them.
Summary of Bugs detected:
1) VOLTE is not working for calls in stock dialer app, I didn't tried it with "Jio call app"(India) which basically allows support of volte for phones without volte for jio sims.
2) Camera is crashing when you click on filters or sometimes randomly too.
3) This rom is very slow as compared to other gsi's .
4) Other kernals like kraken or vendors doesn't boot up your system (well that's not neccessary but I included it)
If the developer will fix Volte then I will continue using this rom , I left is majorly cause I can't call or recieve someone's call, cause of volte issue I flashed it back to stock rom.
Btw I use ON6 (J600GF), its basically Indian version of J6
Cheers
Click to expand...
Click to collapse
1st - This is not the way to report a bug to someone, if you want a bug fixed, provide logs and ask educately.
2nd - Camera works fine, doesn't crash and if it's crashing for you it's probably your fault that has done something wrong.
3rd - This rom is not a GSI, so shouldn't be compared with any kind of GSI, also it's not an AOSP ROM, this is an Oneui 2.1 port from s20 which is a powerful device and has an heavy system, the rom is good for what it's intended for. It's fast and stable and has plenty of feature.
Learn how to give feedback of stuffs, don't be rude, the dev is not doing that cuz he likes you or cuz he owns you something, he made the rom cuz he wanted, he's not being paid, so be edcated.

What about volte if it's s20 port so volte should work on this rom

If I wrote something rudely so sorry about that, but I was just sharing what issues I was facing in this rom compared to the other I have installed and I can't provide log for VOLTE issue as I don't know how to provide it , if you have VOLTE sim then you will maybe face the similar problem.
Also I created this account solely for this rom itself as I thought the VOLTE problem could be fixed by the dev if I told the issue.
Peace .

Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects. You are only allowed to fix the bugs for your variant and I will post here.
FEATURES
OneUI 2.1 under Android 10, ported from the Samsung Galaxy S20 5G (SM-G981B)
All J600 variants should be supported
Arm64 with Treble support
Fully deodexed
H-KERNEL included. Built permissive and overclocked
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
S10 CSC with additional features (call recording, etc)
And many more!
COMMON KNOWN BUGS
Updating camera app from Samsung App Store will break it
Face unlock (most likely never will work on this port)
Camera on live drawing
Some 3rd camera apps like footej don't work
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 2.0 (14/07/2020)
More info in 2nd post
INSTALLATION
Installer will detect right variant and flash proper files
Vendor partition is required
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
Once set, go to screen settings, set fullhd resolution and set back hd
SCREENSHOTS
https://imgur.com/a/j7Pk3Rd
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM S20 PORT, ROM for the Samsung Galaxy J6
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-07-14
Created 2020-07-14
Last Updated 2020-07-15
Click to expand...
Click to collapse
The H-Rom 1.0 on Samsung Galaxy J600-FN after flashing and reboot the phone just bootlops on Samsung mark btw the H-Rom 2.0 boots but after 30 minutes or bench with antutu simple the phone reboots itself. I'm gona to reinstall to see if this happen and if happens i'm gona to send the loggat.
Thanks to release! (sorry for my bad english and i like the s20 camera waterark :laugh: )

@Astrako First of all Congratulations! And Thanks a lot for releasing such a good ROM.
But Calling is broken on J6. Yes the issue is not VoLTE but Calling. I have tested calling on both VoLTE and 3G network.
If I am making a call to a person he/she gets the call but the call gets disconnected before that person answers. Also, the dialer screen shows that Aeroplane mode is on, though it's not.
If I am getting a call then there is no sound heard on either of the sides.
And I even replaced odm with csc but it didn't helped. And I even tested calls after replacing odm with csc on VoLTE and 3G network.
And is it possible to remove blur from the UI??

Developing Zeus said:
...............But Calling is broken on J6. Yes the issue is not VoLTE but Calling. I have tested calling on both VoLTE and 3G network.
If I am making a call to a person he/she gets the call but the call gets disconnected before that person answers.....................
Click to expand...
Click to collapse
Yes that was the issue I was talking about, hope the developer found a fix for that

I'm not in India to test or to make judgments or any prejudices about this beautiful work but the only thing I know I own a J600GF which works and responds very fine with this S20 OneUI 2.1 port works like a charm.
The thing I know since I changed to this custom ROM I feels free like a bird it unlocks many things for my carrier. Thanks to the @Astarko thank you so much ?????????

Z1ll4One said:
I'm not in India to test or to make judgments or any prejudices about this beautiful work but the only thing I know I own a J600GF which works and responds very fine with this S20 OneUI 2.1 port works like a charm.
The thing I know since I changed to this custom ROM I feels free like a bird it unlocks many things for my carrier. Thanks to the @Astarko thank you so much ??????
Click to expand...
Click to collapse
I have a question.
Then Does VoLTE work?

Hello! Does voice command not work on this ROM? For me Voice Match is greyed out, I can't enable it! I would like to use "Ok Google".

You should edit this rom once because...
Why "Kill itself and reboot" happens in my phone only if I Install s20 or a7 v4 rom, also j6q rom.
Most variants of j6 don't occur it, but some of variants of j6 happen it.
You may not be able to understand what "Kill itself and reboot" I'm talking about is.
but I wish you try to understand about this problem as long as you can.

Magisk canary link not working help